blob: d70173bf0242c1fbf6b0a4b83d4dbf19e1d12f0e [file] [log] [blame]
.. SPDX-License-Identifier: GPL-2.0-or-later
Kernel driver max6620
=====================
Supported chips:
Maxim MAX6620
Prefix: 'max6620'
Addresses scanned: none
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6620.pdf
Authors:
- L\. Grunenberg <contact@lgrunenberg.de>
- Cumulus Networks <support@cumulusnetworks.com>
- Shuotian Cheng <shuche@microsoft.com>
- Arun Saravanan Balachandran <Arun_Saravanan_Balac@dell.com>
Description
-----------
This driver implements support for Maxim MAX6620 fan controller.
The driver configures the fan controller in RPM mode. To give the readings more
range or accuracy, the desired value can be set by a programmable register
(1, 2, 4, 8, 16 or 32). Set higher values for larger speeds.
The driver provides the following sensor access in sysfs:
================ ======= =====================================================
fan[1-4]_alarm ro Fan alarm.
fan[1-4]_div rw Sets the nominal RPM range of the fan. Valid values
are 1, 2, 4, 8, 16 and 32.
fan[1-4]_input ro Fan speed in RPM.
fan[1-4]_target rw Desired fan speed in RPM.
================ ======= =====================================================
Usage notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
details.