| // SPDX-License-Identifier: GPL-2.0+ |
| // Copyright (c) 2023 Facebook Inc. |
| /dts-v1/; |
| |
| #include "aspeed-g6.dtsi" |
| #include <dt-bindings/gpio/aspeed-gpio.h> |
| #include <dt-bindings/i2c/i2c.h> |
| |
| / { |
| model = "Facebook Minerva CMM"; |
| compatible = "facebook,minerva-cmc", "aspeed,ast2600"; |
| |
| aliases { |
| serial4 = &uart5; |
| serial5 = &uart6; |
| /* |
| * PCA9548 (2-0077) provides 8 channels connecting to |
| * 6 pcs of FCB (Fan Controller Board). |
| */ |
| i2c16 = &imux16; |
| i2c17 = &imux17; |
| i2c18 = &imux18; |
| i2c19 = &imux19; |
| i2c20 = &imux20; |
| i2c21 = &imux21; |
| i2c22 = &imux22; |
| i2c23 = &imux23; |
| i2c24 = &imux24; |
| i2c25 = &imux25; |
| i2c26 = &imux26; |
| i2c27 = &imux27; |
| i2c28 = &imux28; |
| i2c29 = &imux29; |
| i2c30 = &imux30; |
| i2c31 = &imux31; |
| i2c32 = &imux32; |
| i2c33 = &imux33; |
| i2c34 = &imux34; |
| i2c35 = &imux35; |
| i2c36 = &imux36; |
| i2c37 = &imux37; |
| i2c38 = &imux38; |
| i2c39 = &imux39; |
| i2c40 = &imux40; |
| i2c41 = &imux41; |
| i2c42 = &imux42; |
| i2c43 = &imux43; |
| i2c44 = &imux44; |
| i2c45 = &imux45; |
| i2c46 = &imux46; |
| i2c47 = &imux47; |
| |
| spi1 = &spi_gpio; |
| }; |
| |
| chosen { |
| stdout-path = "serial5:57600n8"; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0x80000000>; |
| }; |
| |
| iio-hwmon { |
| compatible = "iio-hwmon"; |
| io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, |
| <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, |
| <&adc1 2>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led-0 { |
| label = "bmc_heartbeat_amber"; |
| gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| led-1 { |
| label = "fp_id_amber"; |
| default-state = "off"; |
| gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-2 { |
| label = "power_blue"; |
| default-state = "off"; |
| gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led-3 { |
| label = "fan_status_led"; |
| gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-4 { |
| label = "fan_fault_led_n"; |
| gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>; |
| default-state = "off"; |
| }; |
| |
| led-5 { |
| label = "bmc_ready_noled"; |
| gpios = <&sgpiom0 141 (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; |
| }; |
| }; |
| |
| spi_gpio: spi { |
| status = "okay"; |
| compatible = "spi-gpio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; |
| mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; |
| miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; |
| num-chipselects = <1>; |
| cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; |
| |
| tpm@0 { |
| compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; |
| spi-max-frequency = <33000000>; |
| reg = <0>; |
| }; |
| }; |
| }; |
| |
| &uart6 { |
| status = "okay"; |
| }; |
| |
| &wdt1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdtrst1_default>; |
| aspeed,reset-type = "soc"; |
| aspeed,external-signal; |
| aspeed,ext-push-pull; |
| aspeed,ext-active-high; |
| aspeed,ext-pulse-duration = <256>; |
| }; |
| |
| &mac3 { |
| status = "okay"; |
| phy-mode = "rmii"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rmii4_default>; |
| fixed-link { |
| speed = <100>; |
| full-duplex; |
| }; |
| }; |
| |
| &mdio3 { |
| status = "okay"; |
| }; |
| |
| &fmc { |
| status = "okay"; |
| flash@0 { |
| status = "okay"; |
| m25p,fast-read; |
| label = "bmc"; |
| spi-max-frequency = <50000000>; |
| #include "openbmc-flash-layout-128.dtsi" |
| }; |
| flash@1 { |
| status = "okay"; |
| m25p,fast-read; |
| label = "alt-bmc"; |
| spi-max-frequency = <50000000>; |
| }; |
| }; |
| |
| &sgpiom0 { |
| status = "okay"; |
| ngpios = <128>; |
| bus-frequency = <2000000>; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| |
| power-monitor@40 { |
| compatible = "ti,ina230"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-monitor@41 { |
| compatible = "ti,ina230"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-monitor@44 { |
| compatible = "lltc,ltc4287"; |
| reg = <0x44>; |
| shunt-resistor-micro-ohms = <2000>; |
| }; |
| |
| power-monitor@43 { |
| compatible = "infineon,xdp710"; |
| reg = <0x43>; |
| }; |
| |
| leds_gpio: gpio@19 { |
| compatible = "nxp,pca9555"; |
| reg = <0x19>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpio@11 { |
| compatible = "nxp,pca9555"; |
| reg = <0x11>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <238 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "PWRGD_P24V_SMPWROK", "P1V5_PWROK", |
| "P3V3_PWROK", "P5V_PWROK", |
| "P12V_SCM_PWROK", "P12V_PWROK", |
| "P24V_PWROK", "P48V_HSC_PWROK", |
| "ERR_GPIO_IRQ", "TMP75_ALERT_N", |
| "BMC_PWROK", "P12V_INA230_ALERT_N", |
| "P24V_INA230_ALERT_N","", |
| "P48V_HSC_ALERT_N", "P1V05_PWROK"; |
| }; |
| |
| gpio@12 { |
| compatible = "nxp,pca9555"; |
| reg = <0x12>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <240 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "P1V05_PWR_FAIL", "P1V5_PWR_FAIL", |
| "P24V_PWR_FAIL", "P24V_SM_PWR_FAIL", |
| "IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N", |
| "RTC_INT_N_R", "ERR_GPIO_IRQ", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@13 { |
| compatible = "nxp,pca9555"; |
| reg = <0x13>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <242 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "", "", |
| "", "", |
| "", "", |
| "", "", |
| "RACKMON_A_1", "RACKMON_A_2", |
| "RACKMON_B_1", "RACKMON_B_2", |
| "", "", |
| "", ""; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| |
| temperature-sensor@4b { |
| compatible = "ti,tmp75"; |
| reg = <0x4b>; |
| }; |
| |
| temperature-sensor@4f { |
| compatible = "ti,tmp75"; |
| reg = <0x4f>; |
| }; |
| |
| eeprom@54 { |
| compatible = "atmel,24c128"; |
| reg = <0x54>; |
| }; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| |
| i2c-mux@77 { |
| compatible = "nxp,pca9548"; |
| reg = <0x77>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| i2c-mux-idle-disconnect; |
| |
| // FCB 1 |
| imux16: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| |
| pwm@5e{ |
| compatible = "max31790"; |
| reg = <0x5e>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| power-sensor@40 { |
| compatible = "ti,ina238"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@41 { |
| compatible = "ti,ina238"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@44 { |
| compatible = "ti,ina238"; |
| reg = <0x44>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@45 { |
| compatible = "ti,ina238"; |
| reg = <0x45>; |
| shunt-resistor = <1000>; |
| }; |
| |
| temperature-sensor@4b { |
| compatible = "ti,tmp75"; |
| reg = <0x4b>; |
| }; |
| |
| gpio@11 { |
| compatible = "nxp,pca9555"; |
| reg = <0x11>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <218 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R", |
| "P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R", |
| "FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R", |
| "FCB_1_PWRGD_P3V3_R", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@12 { |
| compatible = "nxp,pca9555"; |
| reg = <0x12>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <218 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N", |
| "INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N", |
| "FCB_1_TMP75_ALERT_N", "", |
| "", "", |
| "FAN1_PRSNT", "FAN2_PRSNT", |
| "FAN3_PRSNT", "FAN4_PRSNT", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@13 { |
| compatible = "nxp,pca9555"; |
| reg = <0x13>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <218 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT", |
| "FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT", |
| "FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT", |
| "FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@17 { |
| compatible = "nxp,pca9555"; |
| reg = <0x17>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <218 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL", |
| "FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL", |
| "FAN2_POWER_FAIL", "FAN3_POWER_FAIL", |
| "FAN4_POWER_FAIL", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| }; |
| // FCB 2 |
| imux17: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| |
| pwm@5e{ |
| compatible = "max31790"; |
| reg = <0x5e>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| power-sensor@40 { |
| compatible = "ti,ina238"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@41 { |
| compatible = "ti,ina238"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@44 { |
| compatible = "ti,ina238"; |
| reg = <0x44>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@45 { |
| compatible = "ti,ina238"; |
| reg = <0x45>; |
| shunt-resistor = <1000>; |
| }; |
| |
| temperature-sensor@4b { |
| compatible = "ti,tmp75"; |
| reg = <0x4b>; |
| }; |
| |
| gpio@11 { |
| compatible = "nxp,pca9555"; |
| reg = <0x11>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <220 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R", |
| "P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R", |
| "FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R", |
| "FCB_2_PWRGD_P3V3_R", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@12 { |
| compatible = "nxp,pca9555"; |
| reg = <0x12>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <220 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N", |
| "INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N", |
| "FCB_2_TMP75_ALERT_N", "", |
| "", "", |
| "FAN5_PRSNT", "FAN6_PRSNT", |
| "FAN7_PRSNT", "FAN8_PRSNT", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@13 { |
| compatible = "nxp,pca9555"; |
| reg = <0x13>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <220 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT", |
| "FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT", |
| "FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT", |
| "FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@17 { |
| compatible = "nxp,pca9555"; |
| reg = <0x17>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <220 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL", |
| "FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL", |
| "FAN6_POWER_FAIL", "FAN7_POWER_FAIL", |
| "FAN8_POWER_FAIL", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| }; |
| // FCB 3 |
| imux18: i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| |
| pwm@5e{ |
| compatible = "max31790"; |
| reg = <0x5e>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| power-sensor@40 { |
| compatible = "ti,ina238"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@41 { |
| compatible = "ti,ina238"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@44 { |
| compatible = "ti,ina238"; |
| reg = <0x44>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@45 { |
| compatible = "ti,ina238"; |
| reg = <0x45>; |
| shunt-resistor = <1000>; |
| }; |
| |
| temperature-sensor@4b { |
| compatible = "ti,tmp75"; |
| reg = <0x4b>; |
| }; |
| |
| gpio@11 { |
| compatible = "nxp,pca9555"; |
| reg = <0x11>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <230 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R", |
| "P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R", |
| "FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R", |
| "FCB_3_PWRGD_P3V3_R", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@12 { |
| compatible = "nxp,pca9555"; |
| reg = <0x12>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <230 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N", |
| "INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N", |
| "FCB_3_TMP75_ALERT_N", "", |
| "", "", |
| "FAN9_PRSNT", "FAN10_PRSNT", |
| "FAN11_PRSNT", "FAN12_PRSNT", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@13 { |
| compatible = "nxp,pca9555"; |
| reg = <0x13>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <230 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT", |
| "FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT", |
| "FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT", |
| "FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@17 { |
| compatible = "nxp,pca9555"; |
| reg = <0x17>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <230 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL", |
| "FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL", |
| "FAN10_POWER_FAIL", "FAN11_POWER_FAIL", |
| "FAN12_POWER_FAIL", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| }; |
| // FCB 4 |
| imux19: i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| |
| pwm@5e{ |
| compatible = "max31790"; |
| reg = <0x5e>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| power-sensor@40 { |
| compatible = "ti,ina238"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@41 { |
| compatible = "ti,ina238"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@44 { |
| compatible = "ti,ina238"; |
| reg = <0x44>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@45 { |
| compatible = "ti,ina238"; |
| reg = <0x45>; |
| shunt-resistor = <1000>; |
| }; |
| |
| temperature-sensor@4b { |
| compatible = "ti,tmp75"; |
| reg = <0x4b>; |
| }; |
| |
| gpio@11 { |
| compatible = "nxp,pca9555"; |
| reg = <0x11>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <232 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R", |
| "P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R", |
| "FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R", |
| "FCB_4_PWRGD_P3V3_R", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@12 { |
| compatible = "nxp,pca9555"; |
| reg = <0x12>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <232 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N", |
| "INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N", |
| "FCB_4_TMP75_ALERT_N", "", |
| "", "", |
| "FAN13_PRSNT", "FAN14_PRSNT", |
| "FAN15_PRSNT", "FAN16_PRSNT", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@13 { |
| compatible = "nxp,pca9555"; |
| reg = <0x13>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <232 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT", |
| "FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT", |
| "FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT", |
| "FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@17 { |
| compatible = "nxp,pca9555"; |
| reg = <0x17>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <232 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL", |
| "FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL", |
| "FAN14_POWER_FAIL", "FAN15_POWER_FAIL", |
| "FAN16_POWER_FAIL", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| }; |
| // FCB 5 |
| imux20: i2c@4 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| |
| pwm@5e{ |
| compatible = "max31790"; |
| reg = <0x5e>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| power-sensor@40 { |
| compatible = "ti,ina238"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@41 { |
| compatible = "ti,ina238"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@44 { |
| compatible = "ti,ina238"; |
| reg = <0x44>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@45 { |
| compatible = "ti,ina238"; |
| reg = <0x45>; |
| shunt-resistor = <1000>; |
| }; |
| temperature-sensor@4b { |
| compatible = "ti,tmp75"; |
| reg = <0x4b>; |
| }; |
| |
| gpio@11 { |
| compatible = "nxp,pca9555"; |
| reg = <0x11>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <254 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R", |
| "P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R", |
| "FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R", |
| "FCB_5_PWRGD_P3V3_R", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@12 { |
| compatible = "nxp,pca9555"; |
| reg = <0x12>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <254 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N", |
| "INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N", |
| "FCB_5_TMP75_ALERT_N", "", |
| "", "", |
| "FAN20_PRSNT", "FAN19_PRSNT", |
| "FAN18_PRSNT", "FAN17_PRSNT", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@13 { |
| compatible = "nxp,pca9555"; |
| reg = <0x13>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <254 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT", |
| "FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT", |
| "FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT", |
| "FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@17 { |
| compatible = "nxp,pca9555"; |
| reg = <0x17>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <254 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL", |
| "FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL", |
| "FAN19_POWER_FAIL", "FAN18_POWER_FAIL", |
| "FAN17_POWER_FAIL", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| }; |
| // FCB 6 |
| imux21: i2c@5 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <5>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| |
| pwm@5e{ |
| compatible = "max31790"; |
| reg = <0x5e>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| power-sensor@40 { |
| compatible = "ti,ina238"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@41 { |
| compatible = "ti,ina238"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@44 { |
| compatible = "ti,ina238"; |
| reg = <0x44>; |
| shunt-resistor = <1000>; |
| }; |
| |
| power-sensor@45 { |
| compatible = "ti,ina238"; |
| reg = <0x45>; |
| shunt-resistor = <1000>; |
| }; |
| temperature-sensor@4b { |
| compatible = "ti,tmp75"; |
| reg = <0x4b>; |
| }; |
| |
| gpio@11 { |
| compatible = "nxp,pca9555"; |
| reg = <0x11>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <252 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R", |
| "P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R", |
| "FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R", |
| "FCB_6_PWRGD_P3V3_R", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@12 { |
| compatible = "nxp,pca9555"; |
| reg = <0x12>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <252 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N", |
| "INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N", |
| "FCB_6_TMP75_ALERT_N", "", |
| "", "", |
| "FAN24_PRSNT", "FAN23_PRSNT", |
| "FAN22_PRSNT", "FAN21_PRSNT", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@13 { |
| compatible = "nxp,pca9555"; |
| reg = <0x13>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <252 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT", |
| "FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT", |
| "FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT", |
| "FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| |
| gpio@17 { |
| compatible = "nxp,pca9555"; |
| reg = <0x17>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&sgpiom0>; |
| interrupts = <252 IRQ_TYPE_LEVEL_LOW>; |
| |
| gpio-line-names = |
| "FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL", |
| "FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL", |
| "FAN23_POWER_FAIL", "FAN22_POWER_FAIL", |
| "FAN21_POWER_FAIL", "", |
| "", "", |
| "", "", |
| "", "", |
| "", ""; |
| }; |
| }; |
| |
| imux22: i2c@6 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <6>; |
| }; |
| |
| imux23: i2c@7 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <7>; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| |
| i2c-mux@72 { |
| compatible = "nxp,pca9545"; |
| reg = <0x72>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| imux24: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux25: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux26: i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux27: i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c4 { |
| status = "okay"; |
| |
| i2c-mux@72 { |
| compatible = "nxp,pca9545"; |
| reg = <0x72>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| imux28: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux29: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux30: i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux31: i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c5 { |
| status = "okay"; |
| |
| i2c-mux@72 { |
| compatible = "nxp,pca9545"; |
| reg = <0x72>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| imux32: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux33: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux34: i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux35: i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c6 { |
| status = "okay"; |
| |
| i2c-mux@72 { |
| compatible = "nxp,pca9545"; |
| reg = <0x72>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| imux36: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux37: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux38: i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux39: i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c7 { |
| status = "okay"; |
| }; |
| |
| &i2c8 { |
| status = "okay"; |
| }; |
| |
| &i2c9 { |
| status = "okay"; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| |
| rtc@51 { |
| compatible = "nxp,pcf8563"; |
| reg = <0x51>; |
| }; |
| |
| rtc@68 { |
| compatible = "dallas,ds1339"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| &i2c12 { |
| status = "okay"; |
| |
| i2c-mux@70 { |
| compatible = "nxp,pca9545"; |
| reg = <0x70>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| imux40: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux41: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux42: i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux43: i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| }; |
| }; |
| }; |
| |
| &i2c13 { |
| status = "okay"; |
| |
| i2c-mux@70 { |
| compatible = "nxp,pca9545"; |
| reg = <0x70>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| imux44: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux45: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux46: i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| imux47: i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| }; |
| }; |
| }; |
| |
| &i2c14 { |
| status = "okay"; |
| multi-master; |
| |
| ipmb@10 { |
| compatible = "ipmb-dev"; |
| reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; |
| i2c-protocol; |
| }; |
| }; |
| |
| &i2c15 { |
| status = "okay"; |
| |
| eeprom@50 { |
| compatible = "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| |
| eeprom@56 { |
| compatible = "atmel,24c64"; |
| reg = <0x56>; |
| }; |
| }; |
| |
| &adc0 { |
| aspeed,int-vref-microvolt = <2500000>; |
| status = "okay"; |
| pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default |
| &pinctrl_adc2_default &pinctrl_adc3_default |
| &pinctrl_adc4_default &pinctrl_adc5_default |
| &pinctrl_adc6_default &pinctrl_adc7_default>; |
| }; |
| |
| &adc1 { |
| aspeed,int-vref-microvolt = <2500000>; |
| status = "okay"; |
| pinctrl-0 = <&pinctrl_adc10_default>; |
| }; |
| |
| &ehci0 { |
| status = "okay"; |
| }; |
| |
| &ehci1 { |
| status = "okay"; |
| }; |
| |
| &uhci { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| gpio-line-names = |
| /*A0-A7*/ "","","","","","","","", |
| /*B0-B7*/ "","","","","","","","", |
| /*C0-C7*/ "","","","","BLADE_UART_SEL2","","","", |
| /*D0-D7*/ "","","","","","","","", |
| /*E0-E7*/ "","","","","","","","", |
| /*F0-F7*/ "","","","","","","","", |
| /*G0-G7*/ "","","","","","","","", |
| /*H0-H7*/ "","","","","","","","", |
| /*I0-I7*/ "","","","","","","","", |
| /*J0-J7*/ "","","","","","","","", |
| /*K0-K7*/ "","","","","","","","", |
| /*L0-L7*/ "","","","","BLADE_UART_SEL0","","","", |
| /*M0-M7*/ "","","","","","BLADE_UART_SEL1","","", |
| /*N0-N7*/ "","","","","","","","", |
| /*O0-O7*/ "","","","","","","","", |
| /*P0-P7*/ "","","","","","","","", |
| /*Q0-Q7*/ "","","","","","power-chassis-control","","", |
| /*R0-R7*/ "","","","","","","","", |
| /*S0-S7*/ "","","","","","","","host0-ready", |
| /*T0-T7*/ "","","","","","","","", |
| /*U0-U7*/ "","","","","","","","", |
| /*V0-V7*/ "","","","","BAT_DETECT","","power-chassis-good","", |
| /*W0-W7*/ "","","","","","","","", |
| /*X0-X7*/ "","","BLADE_UART_SEL3","","","","","", |
| /*Y0-Y7*/ "","","","","","","","", |
| /*Z0-Z7*/ "","","","","","","",""; |
| }; |
| |
| &sgpiom0 { |
| gpio-line-names = |
| /*"input pin","output pin"*/ |
| /*A0 - A7*/ |
| "PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N", |
| "PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N", |
| "PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N", |
| "PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N", |
| "PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N", |
| "PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N", |
| "PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N", |
| "PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N", |
| /*B0 - B7*/ |
| "PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N", |
| "PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N", |
| "PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N", |
| "PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N", |
| "PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N", |
| "PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N", |
| "PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N", |
| "PRSNT_MTIA_BLADE16_N","PWREN_MTIA_BLADE16_EN_N", |
| /*C0 - C7*/ |
| "PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N", |
| "PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N", |
| "PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N", |
| "PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N", |
| "PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N", |
| "PRSNT_NW_BLADE6_N","PWREN_NW_BLADE6_EN_N", |
| "PRSNT_FCB_1_N","PWREN_MTIA_BLADE1_HSC_EN_N", |
| "PRSNT_FCB_2_N","PWREN_MTIA_BLADE2_HSC_EN_N", |
| /*D0 - D7*/ |
| "PRSNT_FCB_3_N","PWREN_MTIA_BLADE3_HSC_EN_N", |
| "PRSNT_FCB_4_N","PWREN_MTIA_BLADE4_HSC_EN_N", |
| "PRSNT_FCB_6_N","PWREN_MTIA_BLADE5_HSC_EN_N", |
| "PRSNT_FCB_5_N","PWREN_MTIA_BLADE6_HSC_EN_N", |
| "PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N", |
| "PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N", |
| "PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N", |
| "PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N", |
| /*E0 - E7*/ |
| "PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N", |
| "PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N", |
| "PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N", |
| "PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N", |
| "PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N", |
| "PWRGD_MTIA_BLADE10_PWROK_N","PWREN_MTIA_BLADE16_HSC_EN_N", |
| "PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N", |
| "PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N", |
| /*F0 - F7*/ |
| "PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N", |
| "PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N", |
| "PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N", |
| "PWRGD_MTIA_BLADE16_PWROK_N","PWREN_NW_BLADE6_HSC_EN_N", |
| "PWRGD_NW_BLADE1_PWROK_N","PWREN_SGPIO_FCB_2_EN_N", |
| "PWRGD_NW_BLADE2_PWROK_N","PWREN_SGPIO_FCB_1_EN_N", |
| "PWRGD_NW_BLADE3_PWROK_N","PWREN_SGPIO_FCB_4_EN_N", |
| "PWRGD_NW_BLADE4_PWROK_N","PWREN_SGPIO_FCB_3_EN_N", |
| /*G0 - G7*/ |
| "PWRGD_NW_BLADE5_PWROK_N","PWREN_SGPIO_FCB_5_EN_N", |
| "PWRGD_NW_BLADE6_PWROK_N","PWREN_SGPIO_FCB_6_EN_N", |
| "PWRGD_FCB_1","FM_BMC_RST_RTCRST_R", |
| "PWRGD_FCB_2","", |
| "PWRGD_FCB_3","FM_MDIO_SW_SEL", |
| "PWRGD_FCB_4","FM_P24V_SMPWR_EN", |
| "PWRGD_FCB_6","", |
| "PWRGD_FCB_5","", |
| /*H0 - H7*/ |
| "LEAK_DETECT_MTIA_BLADE1_N","", |
| "LEAK_DETECT_MTIA_BLADE2_N","", |
| "LEAK_DETECT_MTIA_BLADE3_N","", |
| "LEAK_DETECT_MTIA_BLADE4_N","", |
| "LEAK_DETECT_MTIA_BLADE5_N","", |
| "LEAK_DETECT_MTIA_BLADE6_N","", |
| "LEAK_DETECT_MTIA_BLADE7_N","ERR_INJECT_CMM_PWR_FAIL_N", |
| "LEAK_DETECT_MTIA_BLADE8_N","", |
| /*I0 - I7*/ |
| "LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_5_N", |
| "LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_6_N", |
| "LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_4_N", |
| "LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_3_N", |
| "LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_2_N", |
| "LEAK_DETECT_MTIA_BLADE14_N","RST_I2CRST_FCB_1_N", |
| "LEAK_DETECT_MTIA_BLADE15_N","BMC_READY", |
| "LEAK_DETECT_MTIA_BLADE16_N","FM_88E6393X_BIN_UPDATE_EN_N", |
| /*J0 - J7*/ |
| "LEAK_DETECT_NW_BLADE1_N","WATER_VALVE_CLOSED_N", |
| "LEAK_DETECT_NW_BLADE2_N","", |
| "LEAK_DETECT_NW_BLADE3_N","", |
| "LEAK_DETECT_NW_BLADE4_N","", |
| "LEAK_DETECT_NW_BLADE5_N","", |
| "LEAK_DETECT_NW_BLADE6_N","", |
| "PWRGD_MTIA_BLADE1_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE2_HSC_PWROK_N","", |
| /*K0 - K7*/ |
| "PWRGD_MTIA_BLADE3_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE4_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE5_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE6_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE7_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE8_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE9_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE10_HSC_PWROK_N","", |
| /*L0 - L7*/ |
| "PWRGD_MTIA_BLADE11_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE12_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE13_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE14_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE15_HSC_PWROK_N","", |
| "PWRGD_MTIA_BLADE16_HSC_PWROK_N","", |
| "PWRGD_NW_BLADE1_HSC_PWROK_N","", |
| "PWRGD_NW_BLADE2_HSC_PWROK_N","", |
| /*M0 - M7*/ |
| "PWRGD_NW_BLADE3_HSC_PWROK_N","", |
| "PWRGD_NW_BLADE4_HSC_PWROK_N","", |
| "PWRGD_NW_BLADE5_HSC_PWROK_N","", |
| "PWRGD_NW_BLADE6_HSC_PWROK_N","", |
| "RPU_READY","", |
| "IT_GEAR_RPU_LINK_N","", |
| "IT_GEAR_LEAK","", |
| "WATER_VALVE_CLOSED_N","", |
| /*N0 - N7*/ |
| "VALVE_STATUS_0","", |
| "VALVE_STATUS_1","", |
| "PCA9555_IRQ1_N","", |
| "PCA9555_IRQ2_N","", |
| "CR_TOGGLE_BOOT_N","", |
| "IRQ_FCB_1_N","", |
| "IRQ_FCB_2_N","", |
| "CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","", |
| /*O0 - O7*/ |
| "CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","", |
| "BOT_BCB_CABLE_PRSNT_N","", |
| "TOP_BCB_CABLE_PRSNT_N","", |
| "IRQ_FCB_3_N","", |
| "IRQ_FCB_4_N","", |
| "CHASSIS_LEAK0_DETECT_N","", |
| "CHASSIS_LEAK1_DETECT_N","", |
| "PCA9555_IRQ3_N","", |
| /*P0 - P7*/ |
| "PCA9555_IRQ4_N","", |
| "PCA9555_IRQ5_N","", |
| "CMM_AC_PWR_BTN_N","", |
| "RPU_READY_SPARE","", |
| "IT_GEAR_LEAK_SPARE","", |
| "IT_GEAR_RPU_LINK_SPARE_N","", |
| "IRQ_FCB_6_N","", |
| "IRQ_FCB_5_N",""; |
| }; |
