| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2024 Linus Walleij <linus.walleij@linaro.org> |
| */ |
| |
| /dts-v1/; |
| |
| #include "bcm6846.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/leds/common.h> |
| |
| / { |
| model = "Genexis XG6846B Ethernet layer 2/3 router"; |
| compatible = "genexis,xg6846b", "brcm,bcm6846", "brcm,bcmbca"; |
| |
| aliases { |
| serial0 = &uart0; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| /* Micron D9PTK 256 MB RAM */ |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x10000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| secondary-boot@0 { |
| no-map; |
| reg = <0x00000000 0x00008000>; |
| }; |
| pmc3-firmware@8000 { |
| no-map; |
| reg = <0x00008000 0x00100000>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys-polled"; |
| poll-interval = <20000>; |
| |
| /* Called "canyon rescue button" in the vendor DTB */ |
| button-restart { |
| label = "Reset"; |
| linux,code = <KEY_RESTART>; |
| gpios = <&gpio0 41 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &gpio2 { |
| status = "okay"; |
| /* Totally 79 GPIOs are available */ |
| ngpios = <15>; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &leds { |
| status = "okay"; |
| brcm,serial-shift-bits = <16>; |
| |
| led@0 { |
| reg = <0>; |
| active-low; |
| function = "ext"; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| |
| led@1 { |
| reg = <1>; |
| active-low; |
| function = "ext"; |
| color = <LED_COLOR_ID_AMBER>; |
| }; |
| |
| led@3 { |
| reg = <3>; |
| active-low; |
| function = LED_FUNCTION_WAN; |
| color = <LED_COLOR_ID_AMBER>; |
| }; |
| |
| led@4 { |
| reg = <4>; |
| active-low; |
| function = LED_FUNCTION_WAN; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| |
| led@5 { |
| reg = <5>; |
| active-low; |
| function = LED_FUNCTION_POWER; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| |
| led@6 { |
| reg = <6>; |
| active-low; |
| function = LED_FUNCTION_POWER; |
| color = <LED_COLOR_ID_RED>; |
| }; |
| |
| led@15 { |
| reg = <15>; |
| active-low; |
| function = LED_FUNCTION_USB; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| |
| led@7 { |
| /* Activity 03 */ |
| reg = <7>; |
| active-low; |
| function = "lan1"; |
| color = <LED_COLOR_ID_AMBER>; |
| }; |
| |
| led@8 { |
| /* Activity 04 */ |
| reg = <8>; |
| active-low; |
| function = "lan1"; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| |
| led@9 { |
| /* Activity 03 */ |
| reg = <9>; |
| active-low; |
| function = "lan2"; |
| color = <LED_COLOR_ID_AMBER>; |
| }; |
| |
| led@10 { |
| /* Activity 04 */ |
| reg = <10>; |
| active-low; |
| function = "lan2"; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| |
| led@11 { |
| /* Activity 03 */ |
| reg = <11>; |
| active-low; |
| function = "lan3"; |
| color = <LED_COLOR_ID_AMBER>; |
| }; |
| |
| led@12 { |
| /* Activity 04 */ |
| reg = <12>; |
| active-low; |
| function = "lan3"; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| |
| led@13 { |
| /* Activity 03 */ |
| reg = <13>; |
| active-low; |
| function = "lan4"; |
| color = <LED_COLOR_ID_AMBER>; |
| }; |
| |
| led@14 { |
| /* Activity 04 */ |
| reg = <14>; |
| active-low; |
| function = "lan4"; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| }; |
| |
| &hsspi { |
| status = "okay"; |
| }; |
| |
| &nand_controller { |
| brcm,wp-not-connected; |
| status = "okay"; |
| }; |
| |
| &nandcs { |
| nand-on-flash-bbt; |
| brcm,nand-ecc-use-strap; |
| |
| /* Winbond W29N02GV, 256MB with 128KB erase blocks */ |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| loader@0 { |
| label = "loader"; |
| reg = <0x00000000 0x00400000>; |
| }; |
| image@400000 { |
| label = "image"; |
| reg = <0x00400000 0x0fb00000>; |
| }; |
| /* 0x00ff0000-0x00ffffff: bad block list */ |
| }; |
| }; |
| |
| &mdio { |
| status = "okay"; |
| |
| phy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| phy2: ethernet-phy@2 { |
| reg = <2>; |
| }; |
| phy3: ethernet-phy@3 { |
| reg = <3>; |
| }; |
| phy4: ethernet-phy@4 { |
| reg = <4>; |
| }; |
| phy21: ethernet-phy@21 { |
| reg = <21>; |
| }; |
| }; |