| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * Copyright (C) Protonic Holland |
| * Author: David Jander <david@protonic.nl> |
| */ |
| /dts-v1/; |
| |
| #include "stm32mp151a-prtt1l.dtsi" |
| |
| / { |
| model = "Protonic PRTT1S"; |
| compatible = "prt,prtt1s", "st,stm32mp151"; |
| }; |
| |
| ðernet0 { |
| phy-handle = <&phy0>; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c1_pins_a>; |
| pinctrl-1 = <&i2c1_sleep_pins_a>; |
| clock-frequency = <100000>; |
| /delete-property/dmas; |
| /delete-property/dma-names; |
| status = "okay"; |
| |
| humidity-sensor@40 { |
| compatible = "ti,hdc1080"; |
| reg = <0x40>; |
| }; |
| |
| co2-sensor@62 { |
| compatible = "sensirion,scd41"; |
| reg = <0x62>; |
| }; |
| }; |
| |
| &{i2c1_pins_a/pins} { |
| pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ |
| <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ |
| }; |
| |
| &{i2c1_sleep_pins_a/pins} { |
| pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ |
| <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ |
| }; |
| |
| &mdio0 { |
| /* TI DP83TD510E */ |
| phy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-id2000.0181"; |
| reg = <0>; |
| interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <10>; |
| reset-deassert-us = <35>; |
| }; |
| }; |
