| // SPDX-License-Identifier: GPL-2.0 OR MIT |
| /* |
| * Copyright (C) 2022 Sophgo Technology Inc. All rights reserved. |
| */ |
| |
| #include "sg2042.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "Milk-V Pioneer"; |
| compatible = "milkv,pioneer", "sophgo,sg2042"; |
| |
| chosen { |
| stdout-path = "serial0"; |
| }; |
| |
| gpio-power { |
| compatible = "gpio-keys"; |
| |
| key-power { |
| label = "Power Key"; |
| linux,code = <KEY_POWER>; |
| gpios = <&port0a 22 GPIO_ACTIVE_HIGH>; |
| linux,input-type = <EV_KEY>; |
| debounce-interval = <100>; |
| }; |
| }; |
| }; |
| |
| &cgi_main { |
| clock-frequency = <25000000>; |
| }; |
| |
| &cgi_dpll0 { |
| clock-frequency = <25000000>; |
| }; |
| |
| &cgi_dpll1 { |
| clock-frequency = <25000000>; |
| }; |
| |
| &emmc { |
| bus-width = <4>; |
| no-sdio; |
| no-sd; |
| non-removable; |
| wp-inverted; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| |
| mcu: syscon@17 { |
| compatible = "sophgo,sg2042-hwmon-mcu"; |
| reg = <0x17>; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| |
| &sd { |
| bus-width = <4>; |
| no-sdio; |
| no-mmc; |
| wp-inverted; |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| / { |
| thermal-zones { |
| soc-thermal { |
| polling-delay-passive = <1000>; |
| polling-delay = <1000>; |
| thermal-sensors = <&mcu 0>; |
| |
| trips { |
| soc_active1: soc-active1 { |
| temperature = <30000>; |
| hysteresis = <8000>; |
| type = "active"; |
| }; |
| |
| soc_active2: soc-active2 { |
| temperature = <58000>; |
| hysteresis = <12000>; |
| type = "active"; |
| }; |
| |
| soc_active3: soc-active3 { |
| temperature = <70000>; |
| hysteresis = <10000>; |
| type = "active"; |
| }; |
| |
| soc_hot: soc-hot { |
| temperature = <80000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| board-thermal { |
| polling-delay-passive = <1000>; |
| polling-delay = <1000>; |
| thermal-sensors = <&mcu 1>; |
| |
| trips { |
| board_active: board-active { |
| temperature = <75000>; |
| hysteresis = <8000>; |
| type = "active"; |
| }; |
| }; |
| }; |
| }; |
| }; |