| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright (C) 2021 Alibaba Group Holding Limited. |
| * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org> |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/clock/thead,th1520-clk-ap.h> |
| |
| / { |
| compatible = "thead,th1520"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus: cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| timebase-frequency = <3000000>; |
| |
| c910_0: cpu@0 { |
| compatible = "thead,c910", "riscv"; |
| device_type = "cpu"; |
| riscv,isa = "rv64imafdc"; |
| riscv,isa-base = "rv64i"; |
| riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", |
| "zifencei", "zihpm"; |
| reg = <0>; |
| i-cache-block-size = <64>; |
| i-cache-size = <65536>; |
| i-cache-sets = <512>; |
| d-cache-block-size = <64>; |
| d-cache-size = <65536>; |
| d-cache-sets = <512>; |
| next-level-cache = <&l2_cache>; |
| mmu-type = "riscv,sv39"; |
| |
| cpu0_intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| c910_1: cpu@1 { |
| compatible = "thead,c910", "riscv"; |
| device_type = "cpu"; |
| riscv,isa = "rv64imafdc"; |
| riscv,isa-base = "rv64i"; |
| riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", |
| "zifencei", "zihpm"; |
| reg = <1>; |
| i-cache-block-size = <64>; |
| i-cache-size = <65536>; |
| i-cache-sets = <512>; |
| d-cache-block-size = <64>; |
| d-cache-size = <65536>; |
| d-cache-sets = <512>; |
| next-level-cache = <&l2_cache>; |
| mmu-type = "riscv,sv39"; |
| |
| cpu1_intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| c910_2: cpu@2 { |
| compatible = "thead,c910", "riscv"; |
| device_type = "cpu"; |
| riscv,isa = "rv64imafdc"; |
| riscv,isa-base = "rv64i"; |
| riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", |
| "zifencei", "zihpm"; |
| reg = <2>; |
| i-cache-block-size = <64>; |
| i-cache-size = <65536>; |
| i-cache-sets = <512>; |
| d-cache-block-size = <64>; |
| d-cache-size = <65536>; |
| d-cache-sets = <512>; |
| next-level-cache = <&l2_cache>; |
| mmu-type = "riscv,sv39"; |
| |
| cpu2_intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| c910_3: cpu@3 { |
| compatible = "thead,c910", "riscv"; |
| device_type = "cpu"; |
| riscv,isa = "rv64imafdc"; |
| riscv,isa-base = "rv64i"; |
| riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", |
| "zifencei", "zihpm"; |
| reg = <3>; |
| i-cache-block-size = <64>; |
| i-cache-size = <65536>; |
| i-cache-sets = <512>; |
| d-cache-block-size = <64>; |
| d-cache-size = <65536>; |
| d-cache-sets = <512>; |
| next-level-cache = <&l2_cache>; |
| mmu-type = "riscv,sv39"; |
| |
| cpu3_intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| l2_cache: l2-cache { |
| compatible = "cache"; |
| cache-block-size = <64>; |
| cache-level = <2>; |
| cache-size = <1048576>; |
| cache-sets = <1024>; |
| cache-unified; |
| }; |
| }; |
| |
| pmu { |
| compatible = "riscv,pmu"; |
| riscv,event-to-mhpmcounters = |
| <0x00003 0x00003 0x0007fff8>, |
| <0x00004 0x00004 0x0007fff8>, |
| <0x00005 0x00005 0x0007fff8>, |
| <0x00006 0x00006 0x0007fff8>, |
| <0x00007 0x00007 0x0007fff8>, |
| <0x00008 0x00008 0x0007fff8>, |
| <0x00009 0x00009 0x0007fff8>, |
| <0x0000a 0x0000a 0x0007fff8>, |
| <0x10000 0x10000 0x0007fff8>, |
| <0x10001 0x10001 0x0007fff8>, |
| <0x10002 0x10002 0x0007fff8>, |
| <0x10003 0x10003 0x0007fff8>, |
| <0x10010 0x10010 0x0007fff8>, |
| <0x10011 0x10011 0x0007fff8>, |
| <0x10012 0x10012 0x0007fff8>, |
| <0x10013 0x10013 0x0007fff8>; |
| riscv,event-to-mhpmevent = |
| <0x00003 0x00000000 0x00000001>, |
| <0x00004 0x00000000 0x00000002>, |
| <0x00006 0x00000000 0x00000006>, |
| <0x00005 0x00000000 0x00000007>, |
| <0x00007 0x00000000 0x00000008>, |
| <0x00008 0x00000000 0x00000009>, |
| <0x00009 0x00000000 0x0000000a>, |
| <0x0000a 0x00000000 0x0000000b>, |
| <0x10000 0x00000000 0x0000000c>, |
| <0x10001 0x00000000 0x0000000d>, |
| <0x10002 0x00000000 0x0000000e>, |
| <0x10003 0x00000000 0x0000000f>, |
| <0x10010 0x00000000 0x00000010>, |
| <0x10011 0x00000000 0x00000011>, |
| <0x10012 0x00000000 0x00000012>, |
| <0x10013 0x00000000 0x00000013>; |
| riscv,raw-event-to-mhpmcounters = |
| <0x00000000 0x00000001 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000002 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000003 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000004 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000005 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000006 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000007 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000008 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000009 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000000a 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000000b 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000000c 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000000d 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000000e 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000000f 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000010 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000011 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000012 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000013 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000014 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000015 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000016 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000017 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000018 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000019 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000001a 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000001b 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000001c 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000001d 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000001e 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000001f 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000020 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000021 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000022 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000023 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000024 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000025 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000026 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000027 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000028 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x00000029 0xffffffff 0xffffffff 0x0007fff8>, |
| <0x00000000 0x0000002a 0xffffffff 0xffffffff 0x0007fff8>; |
| }; |
| |
| osc: oscillator { |
| compatible = "fixed-clock"; |
| clock-output-names = "osc_24m"; |
| #clock-cells = <0>; |
| }; |
| |
| osc_32k: 32k-oscillator { |
| compatible = "fixed-clock"; |
| clock-output-names = "osc_32k"; |
| #clock-cells = <0>; |
| }; |
| |
| aonsys_clk: clock-73728000 { |
| compatible = "fixed-clock"; |
| clock-frequency = <73728000>; |
| clock-output-names = "aonsys_clk"; |
| #clock-cells = <0>; |
| }; |
| |
| stmmac_axi_config: stmmac-axi-config { |
| snps,wr_osr_lmt = <15>; |
| snps,rd_osr_lmt = <15>; |
| snps,blen = <0 0 64 32 0 0 0>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| interrupt-parent = <&plic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| dma-noncoherent; |
| ranges; |
| |
| plic: interrupt-controller@ffd8000000 { |
| compatible = "thead,th1520-plic", "thead,c900-plic"; |
| reg = <0xff 0xd8000000 0x0 0x01000000>; |
| interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>, |
| <&cpu1_intc 11>, <&cpu1_intc 9>, |
| <&cpu2_intc 11>, <&cpu2_intc 9>, |
| <&cpu3_intc 11>, <&cpu3_intc 9>; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| riscv,ndev = <240>; |
| }; |
| |
| clint: timer@ffdc000000 { |
| compatible = "thead,th1520-clint", "thead,c900-clint"; |
| reg = <0xff 0xdc000000 0x0 0x00010000>; |
| interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, |
| <&cpu1_intc 3>, <&cpu1_intc 7>, |
| <&cpu2_intc 3>, <&cpu2_intc 7>, |
| <&cpu3_intc 3>, <&cpu3_intc 7>; |
| }; |
| |
| spi0: spi@ffe700c000 { |
| compatible = "thead,th1520-spi", "snps,dw-apb-ssi"; |
| reg = <0xff 0xe700c000 0x0 0x1000>; |
| interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_SPI>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@ffe7014000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xff 0xe7014000 0x0 0x100>; |
| interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>; |
| clock-names = "baudclk", "apb_pclk"; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| gmac1: ethernet@ffe7060000 { |
| compatible = "thead,th1520-gmac", "snps,dwmac-3.70a"; |
| reg = <0xff 0xe7060000 0x0 0x2000>, <0xff 0xec004000 0x0 0x1000>; |
| reg-names = "dwmac", "apb"; |
| interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC1>; |
| clock-names = "stmmaceth", "pclk"; |
| snps,pbl = <32>; |
| snps,fixed-burst; |
| snps,multicast-filter-bins = <64>; |
| snps,perfect-filter-entries = <32>; |
| snps,axi-config = <&stmmac_axi_config>; |
| status = "disabled"; |
| |
| mdio1: mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| gmac0: ethernet@ffe7070000 { |
| compatible = "thead,th1520-gmac", "snps,dwmac-3.70a"; |
| reg = <0xff 0xe7070000 0x0 0x2000>, <0xff 0xec003000 0x0 0x1000>; |
| reg-names = "dwmac", "apb"; |
| interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC0>; |
| clock-names = "stmmaceth", "pclk"; |
| snps,pbl = <32>; |
| snps,fixed-burst; |
| snps,multicast-filter-bins = <64>; |
| snps,perfect-filter-entries = <32>; |
| snps,axi-config = <&stmmac_axi_config>; |
| status = "disabled"; |
| |
| mdio0: mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| emmc: mmc@ffe7080000 { |
| compatible = "thead,th1520-dwcmshc"; |
| reg = <0xff 0xe7080000 0x0 0x10000>; |
| interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_EMMC_SDIO>; |
| clock-names = "core"; |
| status = "disabled"; |
| }; |
| |
| sdio0: mmc@ffe7090000 { |
| compatible = "thead,th1520-dwcmshc"; |
| reg = <0xff 0xe7090000 0x0 0x10000>; |
| interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_EMMC_SDIO>; |
| clock-names = "core"; |
| status = "disabled"; |
| }; |
| |
| sdio1: mmc@ffe70a0000 { |
| compatible = "thead,th1520-dwcmshc"; |
| reg = <0xff 0xe70a0000 0x0 0x10000>; |
| interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_EMMC_SDIO>; |
| clock-names = "core"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@ffe7f00000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xff 0xe7f00000 0x0 0x100>; |
| interrupts = <37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>; |
| clock-names = "baudclk", "apb_pclk"; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@ffe7f04000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xff 0xe7f04000 0x0 0x100>; |
| interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>; |
| clock-names = "baudclk", "apb_pclk"; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| gpio@ffe7f34000 { |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xff 0xe7f34000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clk CLK_GPIO2>; |
| clock-names = "bus"; |
| |
| gpio2: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <32>; |
| gpio-ranges = <&padctrl0_apsys 0 0 32>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| gpio@ffe7f38000 { |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xff 0xe7f38000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clk CLK_GPIO3>; |
| clock-names = "bus"; |
| |
| gpio3: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <23>; |
| gpio-ranges = <&padctrl0_apsys 0 32 23>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| padctrl1_apsys: pinctrl@ffe7f3c000 { |
| compatible = "thead,th1520-pinctrl"; |
| reg = <0xff 0xe7f3c000 0x0 0x1000>; |
| clocks = <&clk CLK_PADCTRL1>; |
| thead,pad-group = <2>; |
| }; |
| |
| gpio@ffec005000 { |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xff 0xec005000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clk CLK_GPIO0>; |
| clock-names = "bus"; |
| |
| gpio0: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <32>; |
| gpio-ranges = <&padctrl1_apsys 0 0 32>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| gpio@ffec006000 { |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xff 0xec006000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clk CLK_GPIO1>; |
| clock-names = "bus"; |
| |
| gpio1: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <31>; |
| gpio-ranges = <&padctrl1_apsys 0 32 31>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <57 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| padctrl0_apsys: pinctrl@ffec007000 { |
| compatible = "thead,th1520-pinctrl"; |
| reg = <0xff 0xec007000 0x0 0x1000>; |
| clocks = <&clk CLK_PADCTRL0>; |
| thead,pad-group = <3>; |
| }; |
| |
| uart2: serial@ffec010000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xff 0xec010000 0x0 0x4000>; |
| interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>; |
| clock-names = "baudclk", "apb_pclk"; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| clk: clock-controller@ffef010000 { |
| compatible = "thead,th1520-clk-ap"; |
| reg = <0xff 0xef010000 0x0 0x1000>; |
| clocks = <&osc>; |
| #clock-cells = <1>; |
| }; |
| |
| dmac0: dma-controller@ffefc00000 { |
| compatible = "snps,axi-dma-1.01a"; |
| reg = <0xff 0xefc00000 0x0 0x1000>; |
| interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_PERI_APB_PCLK>, <&clk CLK_PERI_APB_PCLK>; |
| clock-names = "core-clk", "cfgr-clk"; |
| #dma-cells = <1>; |
| dma-channels = <4>; |
| snps,block-size = <65536 65536 65536 65536>; |
| snps,priority = <0 1 2 3>; |
| snps,dma-masters = <1>; |
| snps,data-width = <4>; |
| snps,axi-max-burst-len = <16>; |
| status = "disabled"; |
| }; |
| |
| timer0: timer@ffefc32000 { |
| compatible = "snps,dw-apb-timer"; |
| reg = <0xff 0xefc32000 0x0 0x14>; |
| clocks = <&clk CLK_PERI_APB_PCLK>; |
| clock-names = "timer"; |
| interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| timer1: timer@ffefc32014 { |
| compatible = "snps,dw-apb-timer"; |
| reg = <0xff 0xefc32014 0x0 0x14>; |
| clocks = <&clk CLK_PERI_APB_PCLK>; |
| clock-names = "timer"; |
| interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| timer2: timer@ffefc32028 { |
| compatible = "snps,dw-apb-timer"; |
| reg = <0xff 0xefc32028 0x0 0x14>; |
| clocks = <&clk CLK_PERI_APB_PCLK>; |
| clock-names = "timer"; |
| interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| timer3: timer@ffefc3203c { |
| compatible = "snps,dw-apb-timer"; |
| reg = <0xff 0xefc3203c 0x0 0x14>; |
| clocks = <&clk CLK_PERI_APB_PCLK>; |
| clock-names = "timer"; |
| interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@fff7f08000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xff 0xf7f08000 0x0 0x4000>; |
| interrupts = <40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>; |
| clock-names = "baudclk", "apb_pclk"; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@fff7f0c000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0xff 0xf7f0c000 0x0 0x4000>; |
| interrupts = <41 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>; |
| clock-names = "baudclk", "apb_pclk"; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| timer4: timer@ffffc33000 { |
| compatible = "snps,dw-apb-timer"; |
| reg = <0xff 0xffc33000 0x0 0x14>; |
| clocks = <&clk CLK_PERI_APB_PCLK>; |
| clock-names = "timer"; |
| interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| timer5: timer@ffffc33014 { |
| compatible = "snps,dw-apb-timer"; |
| reg = <0xff 0xffc33014 0x0 0x14>; |
| clocks = <&clk CLK_PERI_APB_PCLK>; |
| clock-names = "timer"; |
| interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| timer6: timer@ffffc33028 { |
| compatible = "snps,dw-apb-timer"; |
| reg = <0xff 0xffc33028 0x0 0x14>; |
| clocks = <&clk CLK_PERI_APB_PCLK>; |
| clock-names = "timer"; |
| interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| timer7: timer@ffffc3303c { |
| compatible = "snps,dw-apb-timer"; |
| reg = <0xff 0xffc3303c 0x0 0x14>; |
| clocks = <&clk CLK_PERI_APB_PCLK>; |
| clock-names = "timer"; |
| interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| mbox_910t: mailbox@ffffc38000 { |
| compatible = "thead,th1520-mbox"; |
| reg = <0xff 0xffc38000 0x0 0x6000>, |
| <0xff 0xffc40000 0x0 0x6000>, |
| <0xff 0xffc4c000 0x0 0x2000>, |
| <0xff 0xffc54000 0x0 0x2000>; |
| reg-names = "local", "remote-icu0", "remote-icu1", "remote-icu2"; |
| clocks = <&clk CLK_MBOX0>, <&clk CLK_MBOX1>, <&clk CLK_MBOX2>, |
| <&clk CLK_MBOX3>; |
| clock-names = "clk-local", "clk-remote-icu0", "clk-remote-icu1", |
| "clk-remote-icu2"; |
| interrupt-parent = <&plic>; |
| interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <1>; |
| }; |
| |
| gpio@fffff41000 { |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xff 0xfff41000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| aogpio: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <16>; |
| gpio-ranges = <&padctrl_aosys 0 9 16>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <76 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| padctrl_aosys: pinctrl@fffff4a000 { |
| compatible = "thead,th1520-pinctrl"; |
| reg = <0xff 0xfff4a000 0x0 0x2000>; |
| clocks = <&aonsys_clk>; |
| thead,pad-group = <1>; |
| }; |
| |
| gpio@fffff52000 { |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0xff 0xfff52000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpio4: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <23>; |
| gpio-ranges = <&padctrl_aosys 0 25 22>, <&padctrl_aosys 22 7 1>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| }; |
| }; |
