| /* | |
| * Copyright 2019 Advanced Micro Devices, Inc. | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be included in | |
| * all copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR | |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, | |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
| * OTHER DEALINGS IN THE SOFTWARE. | |
| */ | |
| #define SWSMU_CODE_LAYER_L1 | |
| #include <linux/firmware.h> | |
| #include <linux/pci.h> | |
| #include <linux/power_supply.h> | |
| #include <linux/reboot.h> | |
| #include "amdgpu.h" | |
| #include "amdgpu_reset.h" | |
| #include "amdgpu_smu.h" | |
| #include "smu_internal.h" | |
| #include "atom.h" | |
| #include "arcturus_ppt.h" | |
| #include "navi10_ppt.h" | |
| #include "sienna_cichlid_ppt.h" | |
| #include "renoir_ppt.h" | |
| #include "vangogh_ppt.h" | |
| #include "aldebaran_ppt.h" | |
| #include "yellow_carp_ppt.h" | |
| #include "cyan_skillfish_ppt.h" | |
| #include "smu_v13_0_0_ppt.h" | |
| #include "smu_v13_0_4_ppt.h" | |
| #include "smu_v13_0_5_ppt.h" | |
| #include "smu_v13_0_6_ppt.h" | |
| #include "smu_v13_0_7_ppt.h" | |
| #include "smu_v14_0_0_ppt.h" | |
| #include "smu_v14_0_2_ppt.h" | |
| #include "smu_v15_0_0_ppt.h" | |
| #include "smu_v15_0_8_ppt.h" | |
| #include "amd_pcie.h" | |
| /* | |
| * DO NOT use these for err/warn/info/debug messages. | |
| * Use dev_err, dev_warn, dev_info and dev_dbg instead. | |
| * They are more MGPU friendly. | |
| */ | |
| #undef pr_err | |
| #undef pr_warn | |
| #undef pr_info | |
| #undef pr_debug | |
| static const struct amd_pm_funcs swsmu_pm_funcs; | |
| static int smu_force_smuclk_levels(struct smu_context *smu, | |
| enum smu_clk_type clk_type, | |
| uint32_t mask); | |
| static int smu_handle_task(struct smu_context *smu, | |
| enum amd_dpm_forced_level level, | |
| enum amd_pp_task task_id); | |
| static int smu_reset(struct smu_context *smu); | |
| static int smu_set_ac_dc(struct smu_context *smu); | |
| static int smu_set_fan_speed_pwm(void *handle, u32 speed); | |
| static int smu_set_fan_control_mode(void *handle, u32 value); | |
| static int smu_set_ppt_limit(void *handle, uint32_t limit_type, uint32_t limit); | |
| static int smu_set_fan_speed_rpm(void *handle, uint32_t speed); | |
| static int smu_set_gfx_cgpg(struct smu_context *smu, bool enabled); | |
| static int smu_set_mp1_state(void *handle, enum pp_mp1_state mp1_state); | |
| static void smu_power_profile_mode_get(struct smu_context *smu, | |
| enum PP_SMC_POWER_PROFILE profile_mode); | |
| static void smu_power_profile_mode_put(struct smu_context *smu, | |
| enum PP_SMC_POWER_PROFILE profile_mode); | |
| static enum smu_clk_type smu_convert_to_smuclk(enum pp_clock_type type); | |
| static int smu_od_edit_dpm_table(void *handle, | |
| enum PP_OD_DPM_TABLE_COMMAND type, | |
| long *input, uint32_t size); | |
| static int smu_sys_get_pp_feature_mask(void *handle, | |
| char *buf) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| return smu_get_pp_feature_mask(smu, buf); | |
| } | |
| static int smu_sys_set_pp_feature_mask(void *handle, | |
| uint64_t new_mask) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| return smu_set_pp_feature_mask(smu, new_mask); | |
| } | |
| int smu_set_residency_gfxoff(struct smu_context *smu, bool value) | |
| { | |
| if (!smu->ppt_funcs->set_gfx_off_residency) | |
| return -EINVAL; | |
| return smu_set_gfx_off_residency(smu, value); | |
| } | |
| int smu_get_residency_gfxoff(struct smu_context *smu, u32 *value) | |
| { | |
| if (!smu->ppt_funcs->get_gfx_off_residency) | |
| return -EINVAL; | |
| return smu_get_gfx_off_residency(smu, value); | |
| } | |
| int smu_get_entrycount_gfxoff(struct smu_context *smu, u64 *value) | |
| { | |
| if (!smu->ppt_funcs->get_gfx_off_entrycount) | |
| return -EINVAL; | |
| return smu_get_gfx_off_entrycount(smu, value); | |
| } | |
| int smu_get_status_gfxoff(struct smu_context *smu, uint32_t *value) | |
| { | |
| if (!smu->ppt_funcs->get_gfx_off_status) | |
| return -EINVAL; | |
| *value = smu_get_gfx_off_status(smu); | |
| return 0; | |
| } | |
| int smu_set_soft_freq_range(struct smu_context *smu, | |
| enum pp_clock_type type, | |
| uint32_t min, | |
| uint32_t max) | |
| { | |
| enum smu_clk_type clk_type; | |
| int ret = 0; | |
| clk_type = smu_convert_to_smuclk(type); | |
| if (clk_type == SMU_CLK_COUNT) | |
| return -EINVAL; | |
| if (smu->ppt_funcs->set_soft_freq_limited_range) | |
| ret = smu->ppt_funcs->set_soft_freq_limited_range(smu, | |
| clk_type, | |
| min, | |
| max, | |
| false); | |
| return ret; | |
| } | |
| int smu_get_dpm_freq_range(struct smu_context *smu, | |
| enum smu_clk_type clk_type, | |
| uint32_t *min, | |
| uint32_t *max) | |
| { | |
| int ret = -ENOTSUPP; | |
| if (!min && !max) | |
| return -EINVAL; | |
| if (smu->ppt_funcs->get_dpm_ultimate_freq) | |
| ret = smu->ppt_funcs->get_dpm_ultimate_freq(smu, | |
| clk_type, | |
| min, | |
| max); | |
| return ret; | |
| } | |
| int smu_set_gfx_power_up_by_imu(struct smu_context *smu) | |
| { | |
| int ret = 0; | |
| struct amdgpu_device *adev = smu->adev; | |
| if (smu->ppt_funcs->set_gfx_power_up_by_imu) { | |
| ret = smu->ppt_funcs->set_gfx_power_up_by_imu(smu); | |
| if (ret) | |
| dev_err(adev->dev, "Failed to enable gfx imu!\n"); | |
| } | |
| return ret; | |
| } | |
| static u32 smu_get_mclk(void *handle, bool low) | |
| { | |
| struct smu_context *smu = handle; | |
| uint32_t clk_freq; | |
| int ret = 0; | |
| ret = smu_get_dpm_freq_range(smu, SMU_UCLK, | |
| low ? &clk_freq : NULL, | |
| !low ? &clk_freq : NULL); | |
| if (ret) | |
| return 0; | |
| return clk_freq * 100; | |
| } | |
| static u32 smu_get_sclk(void *handle, bool low) | |
| { | |
| struct smu_context *smu = handle; | |
| uint32_t clk_freq; | |
| int ret = 0; | |
| ret = smu_get_dpm_freq_range(smu, SMU_GFXCLK, | |
| low ? &clk_freq : NULL, | |
| !low ? &clk_freq : NULL); | |
| if (ret) | |
| return 0; | |
| return clk_freq * 100; | |
| } | |
| static int smu_set_gfx_imu_enable(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP) | |
| return 0; | |
| if (amdgpu_in_reset(smu->adev) || adev->in_s0ix) | |
| return 0; | |
| return smu_set_gfx_power_up_by_imu(smu); | |
| } | |
| static bool is_vcn_enabled(struct amdgpu_device *adev) | |
| { | |
| int i; | |
| for (i = 0; i < adev->num_ip_blocks; i++) { | |
| if ((adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_VCN || | |
| adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_JPEG) && | |
| !adev->ip_blocks[i].status.valid) | |
| return false; | |
| } | |
| return true; | |
| } | |
| static int smu_dpm_set_vcn_enable(struct smu_context *smu, | |
| bool enable, | |
| int inst) | |
| { | |
| struct smu_power_context *smu_power = &smu->smu_power; | |
| struct smu_power_gate *power_gate = &smu_power->power_gate; | |
| int ret = 0; | |
| /* | |
| * don't poweron vcn/jpeg when they are skipped. | |
| */ | |
| if (!is_vcn_enabled(smu->adev)) | |
| return 0; | |
| if (!smu->ppt_funcs->dpm_set_vcn_enable) | |
| return 0; | |
| if (atomic_read(&power_gate->vcn_gated[inst]) ^ enable) | |
| return 0; | |
| ret = smu->ppt_funcs->dpm_set_vcn_enable(smu, enable, inst); | |
| if (!ret) | |
| atomic_set(&power_gate->vcn_gated[inst], !enable); | |
| return ret; | |
| } | |
| static int smu_dpm_set_jpeg_enable(struct smu_context *smu, | |
| bool enable) | |
| { | |
| struct smu_power_context *smu_power = &smu->smu_power; | |
| struct smu_power_gate *power_gate = &smu_power->power_gate; | |
| int ret = 0; | |
| if (!is_vcn_enabled(smu->adev)) | |
| return 0; | |
| if (!smu->ppt_funcs->dpm_set_jpeg_enable) | |
| return 0; | |
| if (atomic_read(&power_gate->jpeg_gated) ^ enable) | |
| return 0; | |
| ret = smu->ppt_funcs->dpm_set_jpeg_enable(smu, enable); | |
| if (!ret) | |
| atomic_set(&power_gate->jpeg_gated, !enable); | |
| return ret; | |
| } | |
| static int smu_dpm_set_vpe_enable(struct smu_context *smu, | |
| bool enable) | |
| { | |
| struct smu_power_context *smu_power = &smu->smu_power; | |
| struct smu_power_gate *power_gate = &smu_power->power_gate; | |
| int ret = 0; | |
| if (!smu->ppt_funcs->dpm_set_vpe_enable) | |
| return 0; | |
| if (atomic_read(&power_gate->vpe_gated) ^ enable) | |
| return 0; | |
| ret = smu->ppt_funcs->dpm_set_vpe_enable(smu, enable); | |
| if (!ret) | |
| atomic_set(&power_gate->vpe_gated, !enable); | |
| return ret; | |
| } | |
| static int smu_dpm_set_isp_enable(struct smu_context *smu, | |
| bool enable) | |
| { | |
| struct smu_power_context *smu_power = &smu->smu_power; | |
| struct smu_power_gate *power_gate = &smu_power->power_gate; | |
| int ret; | |
| if (!smu->ppt_funcs->dpm_set_isp_enable) | |
| return 0; | |
| if (atomic_read(&power_gate->isp_gated) ^ enable) | |
| return 0; | |
| ret = smu->ppt_funcs->dpm_set_isp_enable(smu, enable); | |
| if (!ret) | |
| atomic_set(&power_gate->isp_gated, !enable); | |
| return ret; | |
| } | |
| static int smu_dpm_set_umsch_mm_enable(struct smu_context *smu, | |
| bool enable) | |
| { | |
| struct smu_power_context *smu_power = &smu->smu_power; | |
| struct smu_power_gate *power_gate = &smu_power->power_gate; | |
| int ret = 0; | |
| if (!smu->adev->enable_umsch_mm) | |
| return 0; | |
| if (!smu->ppt_funcs->dpm_set_umsch_mm_enable) | |
| return 0; | |
| if (atomic_read(&power_gate->umsch_mm_gated) ^ enable) | |
| return 0; | |
| ret = smu->ppt_funcs->dpm_set_umsch_mm_enable(smu, enable); | |
| if (!ret) | |
| atomic_set(&power_gate->umsch_mm_gated, !enable); | |
| return ret; | |
| } | |
| static int smu_set_mall_enable(struct smu_context *smu) | |
| { | |
| int ret = 0; | |
| if (!smu->ppt_funcs->set_mall_enable) | |
| return 0; | |
| ret = smu->ppt_funcs->set_mall_enable(smu); | |
| return ret; | |
| } | |
| /** | |
| * smu_dpm_set_power_gate - power gate/ungate the specific IP block | |
| * | |
| * @handle: smu_context pointer | |
| * @block_type: the IP block to power gate/ungate | |
| * @gate: to power gate if true, ungate otherwise | |
| * @inst: the instance of the IP block to power gate/ungate | |
| * | |
| * This API uses no smu->mutex lock protection due to: | |
| * 1. It is either called by other IP block(gfx/sdma/vcn/uvd/vce). | |
| * This is guarded to be race condition free by the caller. | |
| * 2. Or get called on user setting request of power_dpm_force_performance_level. | |
| * Under this case, the smu->mutex lock protection is already enforced on | |
| * the parent API smu_force_performance_level of the call path. | |
| */ | |
| static int smu_dpm_set_power_gate(void *handle, | |
| uint32_t block_type, | |
| bool gate, | |
| int inst) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) { | |
| dev_WARN(smu->adev->dev, | |
| "SMU uninitialized but power %s requested for %u!\n", | |
| gate ? "gate" : "ungate", block_type); | |
| return -EOPNOTSUPP; | |
| } | |
| switch (block_type) { | |
| /* | |
| * Some legacy code of amdgpu_vcn.c and vcn_v2*.c still uses | |
| * AMD_IP_BLOCK_TYPE_UVD for VCN. So, here both of them are kept. | |
| */ | |
| case AMD_IP_BLOCK_TYPE_UVD: | |
| case AMD_IP_BLOCK_TYPE_VCN: | |
| ret = smu_dpm_set_vcn_enable(smu, !gate, inst); | |
| if (ret) | |
| dev_err(smu->adev->dev, "Failed to power %s VCN instance %d!\n", | |
| gate ? "gate" : "ungate", inst); | |
| break; | |
| case AMD_IP_BLOCK_TYPE_GFX: | |
| ret = smu_gfx_off_control(smu, gate); | |
| if (ret) | |
| dev_err(smu->adev->dev, "Failed to %s gfxoff!\n", | |
| gate ? "enable" : "disable"); | |
| break; | |
| case AMD_IP_BLOCK_TYPE_SDMA: | |
| ret = smu_powergate_sdma(smu, gate); | |
| if (ret) | |
| dev_err(smu->adev->dev, "Failed to power %s SDMA!\n", | |
| gate ? "gate" : "ungate"); | |
| break; | |
| case AMD_IP_BLOCK_TYPE_JPEG: | |
| ret = smu_dpm_set_jpeg_enable(smu, !gate); | |
| if (ret) | |
| dev_err(smu->adev->dev, "Failed to power %s JPEG!\n", | |
| gate ? "gate" : "ungate"); | |
| break; | |
| case AMD_IP_BLOCK_TYPE_VPE: | |
| ret = smu_dpm_set_vpe_enable(smu, !gate); | |
| if (ret) | |
| dev_err(smu->adev->dev, "Failed to power %s VPE!\n", | |
| gate ? "gate" : "ungate"); | |
| break; | |
| case AMD_IP_BLOCK_TYPE_ISP: | |
| ret = smu_dpm_set_isp_enable(smu, !gate); | |
| if (ret) | |
| dev_err(smu->adev->dev, "Failed to power %s ISP!\n", | |
| gate ? "gate" : "ungate"); | |
| break; | |
| default: | |
| dev_err(smu->adev->dev, "Unsupported block type!\n"); | |
| return -EINVAL; | |
| } | |
| return ret; | |
| } | |
| /** | |
| * smu_set_user_clk_dependencies - set user profile clock dependencies | |
| * | |
| * @smu: smu_context pointer | |
| * @clk: enum smu_clk_type type | |
| * | |
| * Enable/Disable the clock dependency for the @clk type. | |
| */ | |
| static void smu_set_user_clk_dependencies(struct smu_context *smu, enum smu_clk_type clk) | |
| { | |
| if (smu->adev->in_suspend) | |
| return; | |
| if (clk == SMU_MCLK) { | |
| smu->user_dpm_profile.clk_dependency = 0; | |
| smu->user_dpm_profile.clk_dependency = BIT(SMU_FCLK) | BIT(SMU_SOCCLK); | |
| } else if (clk == SMU_FCLK) { | |
| /* MCLK takes precedence over FCLK */ | |
| if (smu->user_dpm_profile.clk_dependency == (BIT(SMU_FCLK) | BIT(SMU_SOCCLK))) | |
| return; | |
| smu->user_dpm_profile.clk_dependency = 0; | |
| smu->user_dpm_profile.clk_dependency = BIT(SMU_MCLK) | BIT(SMU_SOCCLK); | |
| } else if (clk == SMU_SOCCLK) { | |
| /* MCLK takes precedence over SOCCLK */ | |
| if (smu->user_dpm_profile.clk_dependency == (BIT(SMU_FCLK) | BIT(SMU_SOCCLK))) | |
| return; | |
| smu->user_dpm_profile.clk_dependency = 0; | |
| smu->user_dpm_profile.clk_dependency = BIT(SMU_MCLK) | BIT(SMU_FCLK); | |
| } else | |
| /* Add clk dependencies here, if any */ | |
| return; | |
| } | |
| static void smu_restore_ppt_limits(struct smu_context *smu, | |
| bool restore_defaults) | |
| { | |
| enum smu_power_src_type power_source; | |
| struct smu_ppt_limit_range *range; | |
| uint32_t restore_mask; | |
| uint32_t limit; | |
| int i, ret; | |
| power_source = smu->adev->pm.ac_power ? | |
| SMU_POWER_SOURCE_AC : SMU_POWER_SOURCE_DC; | |
| restore_mask = smu->user_dpm_profile.ppt_limit_user_mask[power_source] & | |
| smu->ppt_limits.supported_mask; | |
| if (!restore_mask && !restore_defaults) | |
| return; | |
| smu->user_dpm_profile.flags |= SMU_DPM_USER_PROFILE_RESTORE; | |
| for (i = SMU_PPT_LIMIT_PPT0; i < SMU_LIMIT_TYPE_COUNT; i++) { | |
| if (!(smu->ppt_limits.supported_mask & BIT(i))) | |
| continue; | |
| if (restore_mask & BIT(i)) { | |
| limit = smu->user_dpm_profile.ppt_limits[power_source][i]; | |
| } else if (restore_defaults) { | |
| range = &smu->ppt_limits.range[power_source][i]; | |
| limit = range->default_value; | |
| } else { | |
| continue; | |
| } | |
| ret = smu_set_ppt_limit(smu, i, limit); | |
| if (ret) | |
| dev_err(smu->adev->dev, | |
| "Failed to restore PPT%d limit: %d\n", i, ret); | |
| } | |
| smu->user_dpm_profile.flags &= ~SMU_DPM_USER_PROFILE_RESTORE; | |
| } | |
| /** | |
| * smu_restore_dpm_user_profile - reinstate user dpm profile | |
| * | |
| * @smu: smu_context pointer | |
| * | |
| * Restore saved user clock frequencies and fan settings. | |
| */ | |
| static void smu_restore_dpm_user_profile(struct smu_context *smu) | |
| { | |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); | |
| int ret = 0; | |
| if (!smu->adev->in_suspend) | |
| return; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return; | |
| /* Enable restore flag */ | |
| smu->user_dpm_profile.flags |= SMU_DPM_USER_PROFILE_RESTORE; | |
| /* set the user dpm clock configurations */ | |
| if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) { | |
| enum smu_clk_type clk_type; | |
| for (clk_type = 0; clk_type < SMU_CLK_COUNT; clk_type++) { | |
| /* | |
| * Iterate over smu clk type and force the saved user clk | |
| * configs, skip if clock dependency is enabled | |
| */ | |
| if (!(smu->user_dpm_profile.clk_dependency & BIT(clk_type)) && | |
| smu->user_dpm_profile.clk_mask[clk_type]) { | |
| ret = smu_force_smuclk_levels(smu, clk_type, | |
| smu->user_dpm_profile.clk_mask[clk_type]); | |
| if (ret) | |
| dev_err(smu->adev->dev, | |
| "Failed to set clock type = %d\n", clk_type); | |
| } | |
| } | |
| } | |
| /* set the user dpm fan configurations */ | |
| if (smu->user_dpm_profile.fan_mode == AMD_FAN_CTRL_MANUAL || | |
| smu->user_dpm_profile.fan_mode == AMD_FAN_CTRL_NONE) { | |
| ret = smu_set_fan_control_mode(smu, smu->user_dpm_profile.fan_mode); | |
| if (ret != -EOPNOTSUPP) { | |
| smu->user_dpm_profile.fan_speed_pwm = 0; | |
| smu->user_dpm_profile.fan_speed_rpm = 0; | |
| smu->user_dpm_profile.fan_mode = AMD_FAN_CTRL_AUTO; | |
| dev_err(smu->adev->dev, "Failed to set manual fan control mode\n"); | |
| } | |
| if (smu->user_dpm_profile.fan_speed_pwm) { | |
| ret = smu_set_fan_speed_pwm(smu, smu->user_dpm_profile.fan_speed_pwm); | |
| if (ret != -EOPNOTSUPP) | |
| dev_err(smu->adev->dev, "Failed to set manual fan speed in pwm\n"); | |
| } | |
| if (smu->user_dpm_profile.fan_speed_rpm) { | |
| ret = smu_set_fan_speed_rpm(smu, smu->user_dpm_profile.fan_speed_rpm); | |
| if (ret != -EOPNOTSUPP) | |
| dev_err(smu->adev->dev, "Failed to set manual fan speed in rpm\n"); | |
| } | |
| } | |
| /* Restore user customized OD settings */ | |
| if (smu->user_dpm_profile.user_od) { | |
| if (smu->ppt_funcs->restore_user_od_settings) { | |
| ret = smu->ppt_funcs->restore_user_od_settings(smu); | |
| if (ret) | |
| dev_err(smu->adev->dev, "Failed to upload customized OD settings\n"); | |
| } | |
| } | |
| /* Disable restore flag */ | |
| smu->user_dpm_profile.flags &= ~SMU_DPM_USER_PROFILE_RESTORE; | |
| } | |
| static int smu_get_power_num_states(void *handle, | |
| struct pp_states_info *state_info) | |
| { | |
| if (!state_info) | |
| return -EINVAL; | |
| /* not support power state */ | |
| memset(state_info, 0, sizeof(struct pp_states_info)); | |
| state_info->nums = 1; | |
| state_info->states[0] = POWER_STATE_TYPE_DEFAULT; | |
| return 0; | |
| } | |
| void amdgpu_smu_early_init(struct amdgpu_device *adev) | |
| { | |
| /* vega20 is 11.0.2, but it's supported via the powerplay code */ | |
| adev->is_sw_smu = adev->asic_type != CHIP_VEGA20 && | |
| (amdgpu_ip_version(adev, MP1_HWIP, 0) >= | |
| IP_VERSION(11, 0, 0) && | |
| amdgpu_device_ip_is_valid(adev, AMD_IP_BLOCK_TYPE_SMC)); | |
| } | |
| bool is_support_cclk_dpm(struct amdgpu_device *adev) | |
| { | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| if (!smu_feature_is_enabled(smu, SMU_FEATURE_CCLK_DPM_BIT)) | |
| return false; | |
| return true; | |
| } | |
| int amdgpu_smu_ras_send_msg(struct amdgpu_device *adev, enum smu_message_type msg, | |
| const uint32_t *params, size_t num_params, | |
| uint32_t *read_args, size_t num_read_args) | |
| { | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| int ret = -EOPNOTSUPP; | |
| if (!smu) | |
| return ret; | |
| if (smu->ppt_funcs && smu->ppt_funcs->ras_send_msg) { | |
| if (num_params && !params) | |
| return -EINVAL; | |
| if (num_read_args && !read_args) | |
| return -EINVAL; | |
| if (num_params > SMU_MSG_MAX_ARGS || num_read_args > SMU_MSG_MAX_ARGS) | |
| return -EINVAL; | |
| ret = smu->ppt_funcs->ras_send_msg(smu, msg, | |
| params, num_params, read_args, num_read_args); | |
| } | |
| return ret; | |
| } | |
| int amdgpu_smu_ras_feature_is_enabled(struct amdgpu_device *adev, | |
| enum smu_feature_mask mask) | |
| { | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| int ret = 0; | |
| if (smu->ppt_funcs && smu->ppt_funcs->feature_is_enabled) | |
| ret = smu->ppt_funcs->feature_is_enabled(smu, mask); | |
| return ret; | |
| } | |
| static int smu_sys_get_pp_table(void *handle, | |
| char **table) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu_table->power_play_table && !smu_table->hardcode_pptable) | |
| return -EOPNOTSUPP; | |
| if (smu_table->hardcode_pptable) | |
| *table = smu_table->hardcode_pptable; | |
| else | |
| *table = smu_table->power_play_table; | |
| return smu_table->power_play_table_size; | |
| } | |
| static int smu_sys_set_pp_table(void *handle, | |
| const char *buf, | |
| size_t size) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| ATOM_COMMON_TABLE_HEADER *header; | |
| void *hardcode_pptable; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!buf || size < sizeof(*header)) | |
| return -EINVAL; | |
| header = (ATOM_COMMON_TABLE_HEADER *)buf; | |
| if (header->usStructureSize != size) { | |
| dev_err(smu->adev->dev, "pp table size not matched !\n"); | |
| return -EIO; | |
| } | |
| hardcode_pptable = kmemdup(buf, size, GFP_KERNEL); | |
| if (!hardcode_pptable) | |
| return -ENOMEM; | |
| kfree(smu_table->hardcode_pptable); | |
| smu_table->hardcode_pptable = hardcode_pptable; | |
| smu_table->power_play_table = smu_table->hardcode_pptable; | |
| smu_table->power_play_table_size = size; | |
| memset(&smu->ppt_limits, 0, sizeof(smu->ppt_limits)); | |
| /* | |
| * Special hw_fini action(for Navi1x, the DPMs disablement will be | |
| * skipped) may be needed for custom pptable uploading. | |
| */ | |
| smu->uploading_custom_pp_table = true; | |
| ret = smu_reset(smu); | |
| if (ret) | |
| dev_info(smu->adev->dev, "smu reset failed, ret = %d\n", ret); | |
| smu->uploading_custom_pp_table = false; | |
| return ret; | |
| } | |
| static int smu_init_driver_allowed_feature_mask(struct smu_context *smu) | |
| { | |
| /* | |
| * With SCPM enabled, the allowed featuremasks setting(via | |
| * PPSMC_MSG_SetAllowedFeaturesMaskLow/High) is not permitted. | |
| * That means there is no way to let PMFW knows the settings below. | |
| * Thus, we just assume all the features are allowed under | |
| * such scenario. | |
| */ | |
| if (smu->adev->scpm_enabled) { | |
| smu_feature_list_set_all(smu, SMU_FEATURE_LIST_ALLOWED); | |
| return 0; | |
| } | |
| smu_feature_list_clear_all(smu, SMU_FEATURE_LIST_ALLOWED); | |
| return smu_init_allowed_features(smu); | |
| } | |
| static int smu_set_funcs(struct amdgpu_device *adev) | |
| { | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| if (adev->pm.pp_feature & PP_OVERDRIVE_MASK) | |
| smu->od_enabled = true; | |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { | |
| case IP_VERSION(11, 0, 0): | |
| case IP_VERSION(11, 0, 5): | |
| case IP_VERSION(11, 0, 9): | |
| navi10_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(11, 0, 7): | |
| case IP_VERSION(11, 0, 11): | |
| case IP_VERSION(11, 0, 12): | |
| case IP_VERSION(11, 0, 13): | |
| sienna_cichlid_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(12, 0, 0): | |
| case IP_VERSION(12, 0, 1): | |
| renoir_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(11, 5, 0): | |
| case IP_VERSION(11, 5, 2): | |
| vangogh_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(13, 0, 1): | |
| case IP_VERSION(13, 0, 3): | |
| case IP_VERSION(13, 0, 8): | |
| yellow_carp_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(13, 0, 4): | |
| case IP_VERSION(13, 0, 11): | |
| smu_v13_0_4_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(13, 0, 5): | |
| smu_v13_0_5_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(11, 0, 8): | |
| cyan_skillfish_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(11, 0, 2): | |
| adev->pm.pp_feature &= ~PP_GFXOFF_MASK; | |
| arcturus_set_ppt_funcs(smu); | |
| /* OD is not supported on Arcturus */ | |
| smu->od_enabled = false; | |
| break; | |
| case IP_VERSION(13, 0, 2): | |
| aldebaran_set_ppt_funcs(smu); | |
| /* Enable pp_od_clk_voltage node */ | |
| smu->od_enabled = true; | |
| break; | |
| case IP_VERSION(13, 0, 0): | |
| case IP_VERSION(13, 0, 10): | |
| smu_v13_0_0_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(13, 0, 6): | |
| case IP_VERSION(13, 0, 14): | |
| case IP_VERSION(13, 0, 12): | |
| smu_v13_0_6_set_ppt_funcs(smu); | |
| /* Enable pp_od_clk_voltage node */ | |
| smu->od_enabled = true; | |
| break; | |
| case IP_VERSION(13, 0, 7): | |
| smu_v13_0_7_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(14, 0, 0): | |
| case IP_VERSION(14, 0, 1): | |
| case IP_VERSION(14, 0, 4): | |
| case IP_VERSION(14, 0, 5): | |
| smu_v14_0_0_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(14, 0, 2): | |
| case IP_VERSION(14, 0, 3): | |
| smu_v14_0_2_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(15, 0, 0): | |
| case IP_VERSION(15, 0, 5): | |
| case IP_VERSION(15, 0, 9): | |
| smu_v15_0_0_set_ppt_funcs(smu); | |
| break; | |
| case IP_VERSION(15, 0, 8): | |
| smu_v15_0_8_set_ppt_funcs(smu); | |
| smu->od_enabled = true; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int smu_early_init(struct amdgpu_ip_block *ip_block) | |
| { | |
| struct amdgpu_device *adev = ip_block->adev; | |
| struct smu_context *smu; | |
| int r; | |
| smu = kzalloc_obj(struct smu_context); | |
| if (!smu) | |
| return -ENOMEM; | |
| smu->adev = adev; | |
| smu->pm_enabled = !!amdgpu_dpm; | |
| smu->is_apu = false; | |
| smu->smu_baco.state = SMU_BACO_STATE_EXIT; | |
| smu->smu_baco.platform_support = false; | |
| smu->smu_baco.maco_support = false; | |
| smu->user_dpm_profile.fan_mode = -1; | |
| smu->power_profile_mode = PP_SMC_POWER_PROFILE_UNKNOWN; | |
| adev->powerplay.pp_handle = smu; | |
| adev->powerplay.pp_funcs = &swsmu_pm_funcs; | |
| r = smu_set_funcs(adev); | |
| if (r) | |
| return r; | |
| return smu_init_microcode(smu); | |
| } | |
| static int smu_set_default_dpm_table(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| struct smu_power_context *smu_power = &smu->smu_power; | |
| struct smu_power_gate *power_gate = &smu_power->power_gate; | |
| int vcn_gate[AMDGPU_MAX_VCN_INSTANCES], jpeg_gate, i; | |
| int ret = 0; | |
| if (!smu->ppt_funcs->set_default_dpm_table) | |
| return 0; | |
| if (adev->pg_flags & AMD_PG_SUPPORT_VCN) { | |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) | |
| vcn_gate[i] = atomic_read(&power_gate->vcn_gated[i]); | |
| } | |
| if (adev->pg_flags & AMD_PG_SUPPORT_JPEG) | |
| jpeg_gate = atomic_read(&power_gate->jpeg_gated); | |
| if (adev->pg_flags & AMD_PG_SUPPORT_VCN) { | |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) { | |
| ret = smu_dpm_set_vcn_enable(smu, true, i); | |
| if (ret) | |
| return ret; | |
| } | |
| } | |
| if (adev->pg_flags & AMD_PG_SUPPORT_JPEG) { | |
| ret = smu_dpm_set_jpeg_enable(smu, true); | |
| if (ret) | |
| goto err_out; | |
| } | |
| ret = smu->ppt_funcs->set_default_dpm_table(smu); | |
| if (ret) | |
| dev_err(smu->adev->dev, | |
| "Failed to setup default dpm clock tables!\n"); | |
| if (adev->pg_flags & AMD_PG_SUPPORT_JPEG) | |
| smu_dpm_set_jpeg_enable(smu, !jpeg_gate); | |
| err_out: | |
| if (adev->pg_flags & AMD_PG_SUPPORT_VCN) { | |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) | |
| smu_dpm_set_vcn_enable(smu, !vcn_gate[i], i); | |
| } | |
| return ret; | |
| } | |
| static int smu_apply_default_config_table_settings(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| int ret = 0; | |
| ret = smu_get_default_config_table_settings(smu, | |
| &adev->pm.config_table); | |
| if (ret) | |
| return ret; | |
| return smu_set_config_table(smu, &adev->pm.config_table); | |
| } | |
| static int smu_late_init(struct amdgpu_ip_block *ip_block) | |
| { | |
| struct amdgpu_device *adev = ip_block->adev; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| int ret = 0; | |
| smu_set_fine_grain_gfx_freq_parameters(smu); | |
| if (!smu->pm_enabled) | |
| return 0; | |
| ret = smu_post_init(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to post smu init!\n"); | |
| return ret; | |
| } | |
| /* | |
| * Explicitly notify PMFW the power mode the system in. Since | |
| * the PMFW may boot the ASIC with a different mode. | |
| * For those supporting ACDC switch via gpio, PMFW will | |
| * handle the switch automatically. Driver involvement | |
| * is unnecessary. | |
| */ | |
| adev->pm.ac_power = power_supply_is_system_supplied() > 0; | |
| smu_set_ac_dc(smu); | |
| if ((amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(13, 0, 1)) || | |
| (amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(13, 0, 3))) | |
| return 0; | |
| if (!amdgpu_sriov_vf(adev) || smu->od_enabled) { | |
| ret = smu_set_default_od_settings(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to setup default OD settings!\n"); | |
| return ret; | |
| } | |
| } | |
| ret = smu_populate_umd_state_clk(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to populate UMD state clocks!\n"); | |
| return ret; | |
| } | |
| if (!amdgpu_sriov_vf(adev)) | |
| smu_get_unique_id(smu); | |
| smu_get_fan_parameters(smu); | |
| smu_handle_task(smu, | |
| smu->smu_dpm.dpm_level, | |
| AMD_PP_TASK_COMPLETE_INIT); | |
| ret = smu_apply_default_config_table_settings(smu); | |
| if (ret && (ret != -EOPNOTSUPP)) { | |
| dev_err(adev->dev, "Failed to apply default DriverSmuConfig settings!\n"); | |
| return ret; | |
| } | |
| if (adev->in_suspend || amdgpu_reset_in_recovery(adev)) | |
| smu_restore_ppt_limits(smu, false); | |
| smu_restore_dpm_user_profile(smu); | |
| return 0; | |
| } | |
| static int smu_init_fb_allocations(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_table *tables = smu_table->tables; | |
| struct smu_table *driver_table = &(smu_table->driver_table); | |
| uint32_t max_table_size = 0; | |
| int ret, i; | |
| /* VRAM allocation for tool table */ | |
| if (tables[SMU_TABLE_PMSTATUSLOG].size) { | |
| ret = amdgpu_bo_create_kernel(adev, | |
| tables[SMU_TABLE_PMSTATUSLOG].size, | |
| tables[SMU_TABLE_PMSTATUSLOG].align, | |
| tables[SMU_TABLE_PMSTATUSLOG].domain, | |
| &tables[SMU_TABLE_PMSTATUSLOG].bo, | |
| &tables[SMU_TABLE_PMSTATUSLOG].mc_address, | |
| &tables[SMU_TABLE_PMSTATUSLOG].cpu_addr); | |
| if (ret) { | |
| dev_err(adev->dev, "VRAM allocation for tool table failed!\n"); | |
| return ret; | |
| } | |
| } | |
| driver_table->domain = AMDGPU_GEM_DOMAIN_VRAM | AMDGPU_GEM_DOMAIN_GTT; | |
| /* VRAM allocation for driver table */ | |
| for (i = 0; i < SMU_TABLE_COUNT; i++) { | |
| if (tables[i].size == 0) | |
| continue; | |
| /* If one of the tables has VRAM domain restriction, keep it in | |
| * VRAM | |
| */ | |
| if ((tables[i].domain & | |
| (AMDGPU_GEM_DOMAIN_VRAM | AMDGPU_GEM_DOMAIN_GTT)) == | |
| AMDGPU_GEM_DOMAIN_VRAM) | |
| driver_table->domain = AMDGPU_GEM_DOMAIN_VRAM; | |
| if (i == SMU_TABLE_PMSTATUSLOG) | |
| continue; | |
| if (max_table_size < tables[i].size) | |
| max_table_size = tables[i].size; | |
| } | |
| driver_table->size = max_table_size; | |
| driver_table->align = PAGE_SIZE; | |
| ret = amdgpu_bo_create_kernel(adev, | |
| driver_table->size, | |
| driver_table->align, | |
| driver_table->domain, | |
| &driver_table->bo, | |
| &driver_table->mc_address, | |
| &driver_table->cpu_addr); | |
| if (ret) { | |
| dev_err(adev->dev, "VRAM allocation for driver table failed!\n"); | |
| if (tables[SMU_TABLE_PMSTATUSLOG].mc_address) | |
| amdgpu_bo_free_kernel(&tables[SMU_TABLE_PMSTATUSLOG].bo, | |
| &tables[SMU_TABLE_PMSTATUSLOG].mc_address, | |
| &tables[SMU_TABLE_PMSTATUSLOG].cpu_addr); | |
| } | |
| return ret; | |
| } | |
| static int smu_fini_fb_allocations(struct smu_context *smu) | |
| { | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_table *tables = smu_table->tables; | |
| struct smu_table *driver_table = &(smu_table->driver_table); | |
| if (tables[SMU_TABLE_PMSTATUSLOG].mc_address) | |
| amdgpu_bo_free_kernel(&tables[SMU_TABLE_PMSTATUSLOG].bo, | |
| &tables[SMU_TABLE_PMSTATUSLOG].mc_address, | |
| &tables[SMU_TABLE_PMSTATUSLOG].cpu_addr); | |
| amdgpu_bo_free_kernel(&driver_table->bo, | |
| &driver_table->mc_address, | |
| &driver_table->cpu_addr); | |
| return 0; | |
| } | |
| static void smu_update_gpu_addresses(struct smu_context *smu) | |
| { | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_table *pm_status_table = smu_table->tables + SMU_TABLE_PMSTATUSLOG; | |
| struct smu_table *driver_table = &(smu_table->driver_table); | |
| struct smu_table *dummy_read_1_table = &smu_table->dummy_read_1_table; | |
| if (pm_status_table->bo) | |
| pm_status_table->mc_address = amdgpu_bo_fb_aper_addr(pm_status_table->bo); | |
| if (driver_table->bo) | |
| driver_table->mc_address = amdgpu_bo_fb_aper_addr(driver_table->bo); | |
| if (dummy_read_1_table->bo) | |
| dummy_read_1_table->mc_address = amdgpu_bo_fb_aper_addr(dummy_read_1_table->bo); | |
| } | |
| /** | |
| * smu_alloc_memory_pool - allocate memory pool in the system memory | |
| * | |
| * @smu: amdgpu_device pointer | |
| * | |
| * This memory pool will be used for SMC use and msg SetSystemVirtualDramAddr | |
| * and DramLogSetDramAddr can notify it changed. | |
| * | |
| * Returns 0 on success, error on failure. | |
| */ | |
| static int smu_alloc_memory_pool(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_table *memory_pool = &smu_table->memory_pool; | |
| uint64_t pool_size = smu->pool_size; | |
| int ret = 0; | |
| if (pool_size == SMU_MEMORY_POOL_SIZE_ZERO) | |
| return ret; | |
| memory_pool->size = pool_size; | |
| memory_pool->align = PAGE_SIZE; | |
| memory_pool->domain = | |
| (adev->pm.smu_debug_mask & SMU_DEBUG_POOL_USE_VRAM) ? | |
| AMDGPU_GEM_DOMAIN_VRAM : | |
| AMDGPU_GEM_DOMAIN_GTT; | |
| switch (pool_size) { | |
| case SMU_MEMORY_POOL_SIZE_256_MB: | |
| case SMU_MEMORY_POOL_SIZE_512_MB: | |
| case SMU_MEMORY_POOL_SIZE_1_GB: | |
| case SMU_MEMORY_POOL_SIZE_2_GB: | |
| ret = amdgpu_bo_create_kernel(adev, | |
| memory_pool->size, | |
| memory_pool->align, | |
| memory_pool->domain, | |
| &memory_pool->bo, | |
| &memory_pool->mc_address, | |
| &memory_pool->cpu_addr); | |
| if (ret) | |
| dev_err(adev->dev, "VRAM allocation for dramlog failed!\n"); | |
| break; | |
| default: | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int smu_free_memory_pool(struct smu_context *smu) | |
| { | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_table *memory_pool = &smu_table->memory_pool; | |
| if (memory_pool->size == SMU_MEMORY_POOL_SIZE_ZERO) | |
| return 0; | |
| amdgpu_bo_free_kernel(&memory_pool->bo, | |
| &memory_pool->mc_address, | |
| &memory_pool->cpu_addr); | |
| memset(memory_pool, 0, sizeof(struct smu_table)); | |
| return 0; | |
| } | |
| static int smu_alloc_dummy_read_table(struct smu_context *smu) | |
| { | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_table *dummy_read_1_table = | |
| &smu_table->dummy_read_1_table; | |
| struct amdgpu_device *adev = smu->adev; | |
| int ret = 0; | |
| if (!dummy_read_1_table->size) | |
| return 0; | |
| ret = amdgpu_bo_create_kernel(adev, | |
| dummy_read_1_table->size, | |
| dummy_read_1_table->align, | |
| dummy_read_1_table->domain, | |
| &dummy_read_1_table->bo, | |
| &dummy_read_1_table->mc_address, | |
| &dummy_read_1_table->cpu_addr); | |
| if (ret) | |
| dev_err(adev->dev, "VRAM allocation for dummy read table failed!\n"); | |
| return ret; | |
| } | |
| static void smu_free_dummy_read_table(struct smu_context *smu) | |
| { | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_table *dummy_read_1_table = | |
| &smu_table->dummy_read_1_table; | |
| amdgpu_bo_free_kernel(&dummy_read_1_table->bo, | |
| &dummy_read_1_table->mc_address, | |
| &dummy_read_1_table->cpu_addr); | |
| memset(dummy_read_1_table, 0, sizeof(struct smu_table)); | |
| } | |
| static int smu_smc_table_sw_init(struct smu_context *smu) | |
| { | |
| int ret; | |
| /** | |
| * Create smu_table structure, and init smc tables such as | |
| * TABLE_PPTABLE, TABLE_WATERMARKS, TABLE_SMU_METRICS, and etc. | |
| */ | |
| ret = smu_init_smc_tables(smu); | |
| if (ret) { | |
| dev_err(smu->adev->dev, "Failed to init smc tables!\n"); | |
| return ret; | |
| } | |
| /** | |
| * Create smu_power_context structure, and allocate smu_dpm_context and | |
| * context size to fill the smu_power_context data. | |
| */ | |
| ret = smu_init_power(smu); | |
| if (ret) { | |
| dev_err(smu->adev->dev, "Failed to init smu_init_power!\n"); | |
| return ret; | |
| } | |
| /* | |
| * allocate vram bos to store smc table contents. | |
| */ | |
| ret = smu_init_fb_allocations(smu); | |
| if (ret) | |
| return ret; | |
| ret = smu_alloc_memory_pool(smu); | |
| if (ret) | |
| return ret; | |
| ret = smu_alloc_dummy_read_table(smu); | |
| if (ret) | |
| return ret; | |
| ret = smu_i2c_init(smu); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static int smu_smc_table_sw_fini(struct smu_context *smu) | |
| { | |
| int ret; | |
| smu_i2c_fini(smu); | |
| smu_free_dummy_read_table(smu); | |
| ret = smu_free_memory_pool(smu); | |
| if (ret) | |
| return ret; | |
| ret = smu_fini_fb_allocations(smu); | |
| if (ret) | |
| return ret; | |
| ret = smu_fini_power(smu); | |
| if (ret) { | |
| dev_err(smu->adev->dev, "Failed to init smu_fini_power!\n"); | |
| return ret; | |
| } | |
| ret = smu_fini_smc_tables(smu); | |
| if (ret) { | |
| dev_err(smu->adev->dev, "Failed to smu_fini_smc_tables!\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void smu_throttling_logging_work_fn(struct work_struct *work) | |
| { | |
| struct smu_context *smu = container_of(work, struct smu_context, | |
| throttling_logging_work); | |
| smu_log_thermal_throttling(smu); | |
| } | |
| static void smu_interrupt_work_fn(struct work_struct *work) | |
| { | |
| struct smu_context *smu = container_of(work, struct smu_context, | |
| interrupt_work); | |
| if (smu->ppt_funcs && smu->ppt_funcs->interrupt_work) | |
| smu->ppt_funcs->interrupt_work(smu); | |
| } | |
| static void smu_swctf_delayed_work_handler(struct work_struct *work) | |
| { | |
| struct smu_context *smu = | |
| container_of(work, struct smu_context, swctf_delayed_work.work); | |
| struct smu_temperature_range *range = | |
| &smu->thermal_range; | |
| struct amdgpu_device *adev = smu->adev; | |
| uint32_t hotspot_tmp, size; | |
| /* | |
| * If the hotspot temperature is confirmed as below SW CTF setting point | |
| * after the delay enforced, nothing will be done. | |
| * Otherwise, a graceful shutdown will be performed to prevent further damage. | |
| */ | |
| if (range->software_shutdown_temp && | |
| smu->ppt_funcs->read_sensor && | |
| !smu->ppt_funcs->read_sensor(smu, | |
| AMDGPU_PP_SENSOR_HOTSPOT_TEMP, | |
| &hotspot_tmp, | |
| &size) && | |
| hotspot_tmp / 1000 < range->software_shutdown_temp) | |
| return; | |
| dev_emerg(adev->dev, "ERROR: GPU over temperature range(SW CTF) detected!\n"); | |
| dev_emerg(adev->dev, "ERROR: System is going to shutdown due to GPU SW CTF!\n"); | |
| orderly_poweroff(true); | |
| } | |
| static void smu_init_xgmi_plpd_mode(struct smu_context *smu) | |
| { | |
| struct smu_dpm_context *dpm_ctxt = &(smu->smu_dpm); | |
| struct smu_dpm_policy_ctxt *policy_ctxt; | |
| struct smu_dpm_policy *policy; | |
| policy = smu_get_pm_policy(smu, PP_PM_POLICY_XGMI_PLPD); | |
| if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(11, 0, 2)) { | |
| if (policy) | |
| policy->current_level = XGMI_PLPD_DEFAULT; | |
| return; | |
| } | |
| /* PMFW put PLPD into default policy after enabling the feature */ | |
| if (smu_feature_is_enabled(smu, | |
| SMU_FEATURE_XGMI_PER_LINK_PWR_DWN_BIT)) { | |
| if (policy) | |
| policy->current_level = XGMI_PLPD_DEFAULT; | |
| } else { | |
| policy_ctxt = dpm_ctxt->dpm_policies; | |
| if (policy_ctxt) | |
| policy_ctxt->policy_mask &= | |
| ~BIT(PP_PM_POLICY_XGMI_PLPD); | |
| } | |
| } | |
| static void smu_init_power_profile(struct smu_context *smu) | |
| { | |
| if (smu->power_profile_mode == PP_SMC_POWER_PROFILE_UNKNOWN) | |
| smu->power_profile_mode = | |
| PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; | |
| smu_power_profile_mode_get(smu, smu->power_profile_mode); | |
| } | |
| void smu_feature_cap_set(struct smu_context *smu, enum smu_feature_cap_id fea_id) | |
| { | |
| struct smu_feature_cap *fea_cap = &smu->fea_cap; | |
| if (fea_id >= SMU_FEATURE_CAP_ID__COUNT) | |
| return; | |
| set_bit(fea_id, fea_cap->cap_map); | |
| } | |
| bool smu_feature_cap_test(struct smu_context *smu, enum smu_feature_cap_id fea_id) | |
| { | |
| struct smu_feature_cap *fea_cap = &smu->fea_cap; | |
| if (fea_id >= SMU_FEATURE_CAP_ID__COUNT) | |
| return false; | |
| return test_bit(fea_id, fea_cap->cap_map); | |
| } | |
| static void smu_feature_cap_init(struct smu_context *smu) | |
| { | |
| struct smu_feature_cap *fea_cap = &smu->fea_cap; | |
| bitmap_zero(fea_cap->cap_map, SMU_FEATURE_CAP_ID__COUNT); | |
| } | |
| static int smu_set_power_dep(struct smu_context *smu, bool enable) | |
| { | |
| if (!smu->ppt_funcs->set_power_dep) | |
| return 0; | |
| return smu->ppt_funcs->set_power_dep(smu, enable); | |
| } | |
| static int smu_sw_init(struct amdgpu_ip_block *ip_block) | |
| { | |
| struct amdgpu_device *adev = ip_block->adev; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| int i, ret; | |
| smu->pool_size = adev->pm.smu_prv_buffer_size; | |
| smu_feature_init(smu, SMU_FEATURE_NUM_DEFAULT); | |
| INIT_WORK(&smu->throttling_logging_work, smu_throttling_logging_work_fn); | |
| INIT_WORK(&smu->interrupt_work, smu_interrupt_work_fn); | |
| atomic64_set(&smu->throttle_int_counter, 0); | |
| smu->watermarks_bitmap = 0; | |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) | |
| atomic_set(&smu->smu_power.power_gate.vcn_gated[i], 1); | |
| atomic_set(&smu->smu_power.power_gate.jpeg_gated, 1); | |
| atomic_set(&smu->smu_power.power_gate.vpe_gated, 1); | |
| atomic_set(&smu->smu_power.power_gate.isp_gated, 1); | |
| atomic_set(&smu->smu_power.power_gate.umsch_mm_gated, 1); | |
| smu_init_power_profile(smu); | |
| smu->display_config = &adev->pm.pm_display_cfg; | |
| smu->smu_dpm.dpm_level = AMD_DPM_FORCED_LEVEL_AUTO; | |
| smu->smu_dpm.requested_dpm_level = AMD_DPM_FORCED_LEVEL_AUTO; | |
| INIT_DELAYED_WORK(&smu->swctf_delayed_work, | |
| smu_swctf_delayed_work_handler); | |
| smu_feature_cap_init(smu); | |
| ret = smu_smc_table_sw_init(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to sw init smc table!\n"); | |
| return ret; | |
| } | |
| /* get boot_values from vbios to set revision, gfxclk, and etc. */ | |
| ret = smu_get_vbios_bootup_values(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to get VBIOS boot clock values!\n"); | |
| return ret; | |
| } | |
| ret = smu_init_pptable_microcode(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to setup pptable firmware!\n"); | |
| return ret; | |
| } | |
| ret = smu_register_irq_handler(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to register smc irq handler!\n"); | |
| return ret; | |
| } | |
| /* If there is no way to query fan control mode, fan control is not supported */ | |
| if (!smu->ppt_funcs->get_fan_control_mode) | |
| smu->adev->pm.no_fan = true; | |
| smu_set_power_dep(smu, true); | |
| return 0; | |
| } | |
| static int smu_sw_fini(struct amdgpu_ip_block *ip_block) | |
| { | |
| struct amdgpu_device *adev = ip_block->adev; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| int ret; | |
| ret = smu_smc_table_sw_fini(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to sw fini smc table!\n"); | |
| return ret; | |
| } | |
| if (smu->custom_profile_params) { | |
| kfree(smu->custom_profile_params); | |
| smu->custom_profile_params = NULL; | |
| } | |
| smu_fini_microcode(smu); | |
| smu_set_power_dep(smu, false); | |
| return 0; | |
| } | |
| static int smu_get_thermal_temperature_range(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| struct smu_temperature_range *range = | |
| &smu->thermal_range; | |
| int ret = 0; | |
| if (!smu->ppt_funcs->get_thermal_temperature_range) | |
| return 0; | |
| ret = smu->ppt_funcs->get_thermal_temperature_range(smu, range); | |
| if (ret) | |
| return ret; | |
| adev->pm.dpm.thermal.min_temp = range->min; | |
| adev->pm.dpm.thermal.max_temp = range->max; | |
| adev->pm.dpm.thermal.max_edge_emergency_temp = range->edge_emergency_max; | |
| adev->pm.dpm.thermal.min_hotspot_temp = range->hotspot_min; | |
| adev->pm.dpm.thermal.max_hotspot_crit_temp = range->hotspot_crit_max; | |
| adev->pm.dpm.thermal.max_hotspot_emergency_temp = range->hotspot_emergency_max; | |
| adev->pm.dpm.thermal.min_mem_temp = range->mem_min; | |
| adev->pm.dpm.thermal.max_mem_crit_temp = range->mem_crit_max; | |
| adev->pm.dpm.thermal.max_mem_emergency_temp = range->mem_emergency_max; | |
| return ret; | |
| } | |
| /** | |
| * smu_wbrf_handle_exclusion_ranges - consume the wbrf exclusion ranges | |
| * | |
| * @smu: smu_context pointer | |
| * | |
| * Retrieve the wbrf exclusion ranges and send them to PMFW for proper handling. | |
| * Returns 0 on success, error on failure. | |
| */ | |
| static int smu_wbrf_handle_exclusion_ranges(struct smu_context *smu) | |
| { | |
| struct wbrf_ranges_in_out wbrf_exclusion = {0}; | |
| struct freq_band_range *wifi_bands = wbrf_exclusion.band_list; | |
| struct amdgpu_device *adev = smu->adev; | |
| uint32_t num_of_wbrf_ranges = MAX_NUM_OF_WBRF_RANGES; | |
| uint64_t start, end; | |
| int ret, i, j; | |
| ret = amd_wbrf_retrieve_freq_band(adev->dev, &wbrf_exclusion); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to retrieve exclusion ranges!\n"); | |
| return ret; | |
| } | |
| /* | |
| * The exclusion ranges array we got might be filled with holes and duplicate | |
| * entries. For example: | |
| * {(2400, 2500), (0, 0), (6882, 6962), (2400, 2500), (0, 0), (6117, 6189), (0, 0)...} | |
| * We need to do some sortups to eliminate those holes and duplicate entries. | |
| * Expected output: {(2400, 2500), (6117, 6189), (6882, 6962), (0, 0)...} | |
| */ | |
| for (i = 0; i < num_of_wbrf_ranges; i++) { | |
| start = wifi_bands[i].start; | |
| end = wifi_bands[i].end; | |
| /* get the last valid entry to fill the intermediate hole */ | |
| if (!start && !end) { | |
| for (j = num_of_wbrf_ranges - 1; j > i; j--) | |
| if (wifi_bands[j].start && wifi_bands[j].end) | |
| break; | |
| /* no valid entry left */ | |
| if (j <= i) | |
| break; | |
| start = wifi_bands[i].start = wifi_bands[j].start; | |
| end = wifi_bands[i].end = wifi_bands[j].end; | |
| wifi_bands[j].start = 0; | |
| wifi_bands[j].end = 0; | |
| num_of_wbrf_ranges = j; | |
| } | |
| /* eliminate duplicate entries */ | |
| for (j = i + 1; j < num_of_wbrf_ranges; j++) { | |
| if ((wifi_bands[j].start == start) && (wifi_bands[j].end == end)) { | |
| wifi_bands[j].start = 0; | |
| wifi_bands[j].end = 0; | |
| } | |
| } | |
| } | |
| /* Send the sorted wifi_bands to PMFW */ | |
| ret = smu_set_wbrf_exclusion_ranges(smu, wifi_bands); | |
| /* Try to set the wifi_bands again */ | |
| if (unlikely(ret == -EBUSY)) { | |
| mdelay(5); | |
| ret = smu_set_wbrf_exclusion_ranges(smu, wifi_bands); | |
| } | |
| return ret; | |
| } | |
| /** | |
| * smu_wbrf_event_handler - handle notify events | |
| * | |
| * @nb: notifier block | |
| * @action: event type | |
| * @_arg: event data | |
| * | |
| * Calls relevant amdgpu function in response to wbrf event | |
| * notification from kernel. | |
| */ | |
| static int smu_wbrf_event_handler(struct notifier_block *nb, | |
| unsigned long action, void *_arg) | |
| { | |
| struct smu_context *smu = container_of(nb, struct smu_context, wbrf_notifier); | |
| switch (action) { | |
| case WBRF_CHANGED: | |
| schedule_delayed_work(&smu->wbrf_delayed_work, | |
| msecs_to_jiffies(SMU_WBRF_EVENT_HANDLING_PACE)); | |
| break; | |
| default: | |
| return NOTIFY_DONE; | |
| } | |
| return NOTIFY_OK; | |
| } | |
| /** | |
| * smu_wbrf_delayed_work_handler - callback on delayed work timer expired | |
| * | |
| * @work: struct work_struct pointer | |
| * | |
| * Flood is over and driver will consume the latest exclusion ranges. | |
| */ | |
| static void smu_wbrf_delayed_work_handler(struct work_struct *work) | |
| { | |
| struct smu_context *smu = container_of(work, struct smu_context, wbrf_delayed_work.work); | |
| smu_wbrf_handle_exclusion_ranges(smu); | |
| } | |
| /** | |
| * smu_wbrf_support_check - check wbrf support | |
| * | |
| * @smu: smu_context pointer | |
| * | |
| * Verifies the ACPI interface whether wbrf is supported. | |
| */ | |
| static void smu_wbrf_support_check(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| smu->wbrf_supported = smu_is_asic_wbrf_supported(smu) && amdgpu_wbrf && | |
| acpi_amd_wbrf_supported_consumer(adev->dev); | |
| if (smu->wbrf_supported) | |
| dev_info(adev->dev, "RF interference mitigation is supported\n"); | |
| } | |
| /** | |
| * smu_wbrf_init - init driver wbrf support | |
| * | |
| * @smu: smu_context pointer | |
| * | |
| * Verifies the AMD ACPI interfaces and registers with the wbrf | |
| * notifier chain if wbrf feature is supported. | |
| * Returns 0 on success, error on failure. | |
| */ | |
| static int smu_wbrf_init(struct smu_context *smu) | |
| { | |
| int ret; | |
| if (!smu->wbrf_supported) | |
| return 0; | |
| INIT_DELAYED_WORK(&smu->wbrf_delayed_work, smu_wbrf_delayed_work_handler); | |
| smu->wbrf_notifier.notifier_call = smu_wbrf_event_handler; | |
| ret = amd_wbrf_register_notifier(&smu->wbrf_notifier); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Some wifiband exclusion ranges may be already there | |
| * before our driver loaded. To make sure our driver | |
| * is awared of those exclusion ranges. | |
| */ | |
| schedule_delayed_work(&smu->wbrf_delayed_work, | |
| msecs_to_jiffies(SMU_WBRF_EVENT_HANDLING_PACE)); | |
| return 0; | |
| } | |
| /** | |
| * smu_wbrf_fini - tear down driver wbrf support | |
| * | |
| * @smu: smu_context pointer | |
| * | |
| * Unregisters with the wbrf notifier chain. | |
| */ | |
| static void smu_wbrf_fini(struct smu_context *smu) | |
| { | |
| if (!smu->wbrf_supported) | |
| return; | |
| amd_wbrf_unregister_notifier(&smu->wbrf_notifier); | |
| cancel_delayed_work_sync(&smu->wbrf_delayed_work); | |
| } | |
| static int smu_smc_hw_setup(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| uint8_t pcie_gen = 0, pcie_width = 0; | |
| struct smu_feature_bits features_supported; | |
| int ret = 0; | |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { | |
| case IP_VERSION(11, 0, 7): | |
| case IP_VERSION(11, 0, 11): | |
| case IP_VERSION(11, 5, 0): | |
| case IP_VERSION(11, 5, 2): | |
| case IP_VERSION(11, 0, 12): | |
| if (adev->in_suspend && smu_is_dpm_running(smu)) { | |
| dev_info(adev->dev, "dpm has been enabled\n"); | |
| ret = smu_system_features_control(smu, true); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed system features control!\n"); | |
| return ret; | |
| } | |
| return smu_enable_thermal_alert(smu); | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| ret = smu_init_display_count(smu, 0); | |
| if (ret) { | |
| dev_info(adev->dev, "Failed to pre-set display count as 0!\n"); | |
| return ret; | |
| } | |
| ret = smu_set_driver_table_location(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to SetDriverDramAddr!\n"); | |
| return ret; | |
| } | |
| /* | |
| * Set PMSTATUSLOG table bo address with SetToolsDramAddr MSG for tools. | |
| */ | |
| ret = smu_set_tool_table_location(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to SetToolsDramAddr!\n"); | |
| return ret; | |
| } | |
| /* | |
| * Use msg SetSystemVirtualDramAddr and DramLogSetDramAddr can notify | |
| * pool location. | |
| */ | |
| ret = smu_notify_memory_pool_location(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to SetDramLogDramAddr!\n"); | |
| return ret; | |
| } | |
| /* | |
| * It is assumed the pptable used before runpm is same as | |
| * the one used afterwards. Thus, we can reuse the stored | |
| * copy and do not need to resetup the pptable again. | |
| */ | |
| if (!adev->in_runpm) { | |
| ret = smu_setup_pptable(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to setup pptable!\n"); | |
| return ret; | |
| } | |
| } | |
| /* smu_dump_pptable(smu); */ | |
| /* | |
| * With SCPM enabled, PSP is responsible for the PPTable transferring | |
| * (to SMU). Driver involvement is not needed and permitted. | |
| */ | |
| if (!adev->scpm_enabled) { | |
| /* | |
| * Copy pptable bo in the vram to smc with SMU MSGs such as | |
| * SetDriverDramAddr and TransferTableDram2Smu. | |
| */ | |
| ret = smu_write_pptable(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to transfer pptable to SMC!\n"); | |
| return ret; | |
| } | |
| } | |
| /* issue Run*Btc msg */ | |
| ret = smu_run_btc(smu); | |
| if (ret) | |
| return ret; | |
| /* Enable UclkShadow on wbrf supported */ | |
| if (smu->wbrf_supported) { | |
| ret = smu_enable_uclk_shadow(smu, true); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to enable UclkShadow feature to support wbrf!\n"); | |
| return ret; | |
| } | |
| } | |
| /* | |
| * With SCPM enabled, these actions(and relevant messages) are | |
| * not needed and permitted. | |
| */ | |
| if (!adev->scpm_enabled) { | |
| ret = smu_feature_set_allowed_mask(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to set driver allowed features mask!\n"); | |
| return ret; | |
| } | |
| } | |
| if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN5) | |
| pcie_gen = 4; | |
| else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4) | |
| pcie_gen = 3; | |
| else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3) | |
| pcie_gen = 2; | |
| else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2) | |
| pcie_gen = 1; | |
| else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1) | |
| pcie_gen = 0; | |
| /* Bit 31:16: LCLK DPM level. 0 is DPM0, and 1 is DPM1 | |
| * Bit 15:8: PCIE GEN, 0 to 3 corresponds to GEN1 to GEN4 | |
| * Bit 7:0: PCIE lane width, 1 to 7 corresponds is x1 to x32 | |
| */ | |
| if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X32) | |
| pcie_width = 7; | |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X16) | |
| pcie_width = 6; | |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X12) | |
| pcie_width = 5; | |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X8) | |
| pcie_width = 4; | |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X4) | |
| pcie_width = 3; | |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X2) | |
| pcie_width = 2; | |
| else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X1) | |
| pcie_width = 1; | |
| ret = smu_update_pcie_parameters(smu, pcie_gen, pcie_width); | |
| if (ret) { | |
| dev_err(adev->dev, "Attempt to override pcie params failed!\n"); | |
| return ret; | |
| } | |
| ret = smu_system_features_control(smu, true); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to enable requested dpm features!\n"); | |
| return ret; | |
| } | |
| smu_init_xgmi_plpd_mode(smu); | |
| ret = smu_feature_get_enabled_mask(smu, &features_supported); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to retrieve supported dpm features!\n"); | |
| return ret; | |
| } | |
| smu_feature_list_set_bits(smu, SMU_FEATURE_LIST_SUPPORTED, | |
| features_supported.bits); | |
| if (!smu_is_dpm_running(smu)) | |
| dev_info(adev->dev, "dpm has been disabled\n"); | |
| /* | |
| * Set initialized values (get from vbios) to dpm tables context such as | |
| * gfxclk, memclk, dcefclk, and etc. And enable the DPM feature for each | |
| * type of clks. | |
| */ | |
| ret = smu_set_default_dpm_table(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to setup default dpm clock tables!\n"); | |
| return ret; | |
| } | |
| ret = smu_get_thermal_temperature_range(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to get thermal temperature ranges!\n"); | |
| return ret; | |
| } | |
| ret = smu_enable_thermal_alert(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to enable thermal alert!\n"); | |
| return ret; | |
| } | |
| ret = smu_notify_display_change(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to notify display change!\n"); | |
| return ret; | |
| } | |
| /* | |
| * Set min deep sleep dce fclk with bootup value from vbios via | |
| * SetMinDeepSleepDcefclk MSG. | |
| */ | |
| ret = smu_set_min_dcef_deep_sleep(smu, | |
| smu->smu_table.boot_values.dcefclk / 100); | |
| if (ret) { | |
| dev_err(adev->dev, "Error setting min deepsleep dcefclk\n"); | |
| return ret; | |
| } | |
| /* Init wbrf support. Properly setup the notifier */ | |
| ret = smu_wbrf_init(smu); | |
| if (ret) | |
| dev_err(adev->dev, "Error during wbrf init call\n"); | |
| return ret; | |
| } | |
| static int smu_start_smc_engine(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| int ret = 0; | |
| if (amdgpu_virt_xgmi_migrate_enabled(adev)) | |
| smu_update_gpu_addresses(smu); | |
| smu->smc_fw_state = SMU_FW_INIT; | |
| if (adev->firmware.load_type != AMDGPU_FW_LOAD_PSP) { | |
| if (amdgpu_ip_version(adev, MP1_HWIP, 0) < IP_VERSION(11, 0, 0)) { | |
| if (smu->ppt_funcs->load_microcode) { | |
| ret = smu->ppt_funcs->load_microcode(smu); | |
| if (ret) | |
| return ret; | |
| } | |
| } | |
| } | |
| if (smu->ppt_funcs->check_fw_status) { | |
| ret = smu->ppt_funcs->check_fw_status(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "SMC is not ready\n"); | |
| return ret; | |
| } | |
| } | |
| /* | |
| * Send msg GetDriverIfVersion to check if the return value is equal | |
| * with DRIVER_IF_VERSION of smc header. | |
| */ | |
| ret = smu_check_fw_version(smu); | |
| if (ret) | |
| return ret; | |
| return ret; | |
| } | |
| static int smu_hw_init(struct amdgpu_ip_block *ip_block) | |
| { | |
| int i, ret; | |
| struct amdgpu_device *adev = ip_block->adev; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| if (amdgpu_sriov_multi_vf_mode(adev)) { | |
| smu->pm_enabled = false; | |
| return 0; | |
| } | |
| ret = smu_start_smc_engine(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "SMC engine is not correctly up!\n"); | |
| return ret; | |
| } | |
| /* | |
| * Check whether wbrf is supported. This needs to be done | |
| * before SMU setup starts since part of SMU configuration | |
| * relies on this. | |
| */ | |
| smu_wbrf_support_check(smu); | |
| if (smu->is_apu) { | |
| ret = smu_set_gfx_imu_enable(smu); | |
| if (ret) | |
| return ret; | |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) | |
| smu_dpm_set_vcn_enable(smu, true, i); | |
| smu_dpm_set_jpeg_enable(smu, true); | |
| smu_dpm_set_umsch_mm_enable(smu, true); | |
| smu_set_mall_enable(smu); | |
| smu_set_gfx_cgpg(smu, true); | |
| } | |
| if (!smu->pm_enabled) | |
| return 0; | |
| ret = smu_init_driver_allowed_feature_mask(smu); | |
| if (ret) | |
| return ret; | |
| ret = smu_smc_hw_setup(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to setup smc hw!\n"); | |
| return ret; | |
| } | |
| /* | |
| * Move maximum sustainable clock retrieving here considering | |
| * 1. It is not needed on resume(from S3). | |
| * 2. DAL settings come between .hw_init and .late_init of SMU. | |
| * And DAL needs to know the maximum sustainable clocks. Thus | |
| * it cannot be put in .late_init(). | |
| */ | |
| ret = smu_init_max_sustainable_clocks(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to init max sustainable clocks!\n"); | |
| return ret; | |
| } | |
| adev->pm.dpm_enabled = true; | |
| dev_info(adev->dev, "SMU is initialized successfully!\n"); | |
| return 0; | |
| } | |
| static int smu_disable_dpms(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| int ret = 0; | |
| bool use_baco = !smu->is_apu && | |
| ((amdgpu_in_reset(adev) && | |
| (amdgpu_asic_reset_method(adev) == AMD_RESET_METHOD_BACO)) || | |
| ((adev->in_runpm || adev->in_s4) && amdgpu_asic_supports_baco(adev))); | |
| /* | |
| * For SMU 13.0.0 and 13.0.7, PMFW will handle the DPM features(disablement or others) | |
| * properly on suspend/reset/unload. Driver involvement may cause some unexpected issues. | |
| */ | |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { | |
| case IP_VERSION(13, 0, 0): | |
| case IP_VERSION(13, 0, 7): | |
| case IP_VERSION(13, 0, 10): | |
| case IP_VERSION(14, 0, 2): | |
| case IP_VERSION(14, 0, 3): | |
| return 0; | |
| default: | |
| break; | |
| } | |
| /* | |
| * For custom pptable uploading, skip the DPM features | |
| * disable process on Navi1x ASICs. | |
| * - As the gfx related features are under control of | |
| * RLC on those ASICs. RLC reinitialization will be | |
| * needed to reenable them. That will cost much more | |
| * efforts. | |
| * | |
| * - SMU firmware can handle the DPM reenablement | |
| * properly. | |
| */ | |
| if (smu->uploading_custom_pp_table) { | |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { | |
| case IP_VERSION(11, 0, 0): | |
| case IP_VERSION(11, 0, 5): | |
| case IP_VERSION(11, 0, 9): | |
| case IP_VERSION(11, 0, 7): | |
| case IP_VERSION(11, 0, 11): | |
| case IP_VERSION(11, 5, 0): | |
| case IP_VERSION(11, 5, 2): | |
| case IP_VERSION(11, 0, 12): | |
| case IP_VERSION(11, 0, 13): | |
| return 0; | |
| default: | |
| break; | |
| } | |
| } | |
| /* | |
| * For Sienna_Cichlid, PMFW will handle the features disablement properly | |
| * on BACO in. Driver involvement is unnecessary. | |
| */ | |
| if (use_baco) { | |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { | |
| case IP_VERSION(11, 0, 7): | |
| case IP_VERSION(11, 0, 0): | |
| case IP_VERSION(11, 0, 5): | |
| case IP_VERSION(11, 0, 9): | |
| case IP_VERSION(13, 0, 7): | |
| return 0; | |
| default: | |
| break; | |
| } | |
| } | |
| /* | |
| * For GFX11 and subsequent APUs, PMFW will handle the features disablement properly | |
| * for gpu reset and S0i3 cases. Driver involvement is unnecessary. | |
| */ | |
| if (IP_VERSION_MAJ(amdgpu_ip_version(adev, GC_HWIP, 0)) >= 11 && | |
| smu->is_apu && (amdgpu_in_reset(adev) || adev->in_s0ix)) | |
| return 0; | |
| /* vangogh s0ix */ | |
| if ((amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 5, 0) || | |
| amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 5, 2)) && | |
| adev->in_s0ix) | |
| return 0; | |
| /* | |
| * For gpu reset, runpm and hibernation through BACO, | |
| * BACO feature has to be kept enabled. | |
| */ | |
| if (use_baco && smu_feature_is_enabled(smu, SMU_FEATURE_BACO_BIT)) { | |
| ret = smu_disable_all_features_with_exception(smu, | |
| SMU_FEATURE_BACO_BIT); | |
| if (ret) | |
| dev_err(adev->dev, "Failed to disable smu features except BACO.\n"); | |
| } else { | |
| /* DisableAllSmuFeatures message is not permitted with SCPM enabled */ | |
| if (!adev->scpm_enabled) { | |
| ret = smu_system_features_control(smu, false); | |
| if (ret) | |
| dev_err(adev->dev, "Failed to disable smu features.\n"); | |
| } | |
| } | |
| /* Notify SMU RLC is going to be off, stop RLC and SMU interaction. | |
| * otherwise SMU will hang while interacting with RLC if RLC is halted | |
| * this is a WA for Vangogh asic which fix the SMU hang issue. | |
| */ | |
| ret = smu_notify_rlc_state(smu, false); | |
| if (ret) { | |
| dev_err(adev->dev, "Fail to notify rlc status!\n"); | |
| return ret; | |
| } | |
| if (amdgpu_ip_version(adev, GC_HWIP, 0) >= IP_VERSION(9, 4, 2) && | |
| !((adev->flags & AMD_IS_APU) && adev->gfx.imu.funcs) && | |
| !amdgpu_sriov_vf(adev) && adev->gfx.rlc.funcs->stop) | |
| adev->gfx.rlc.funcs->stop(adev); | |
| return ret; | |
| } | |
| static int smu_smc_hw_cleanup(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| int ret = 0; | |
| smu_wbrf_fini(smu); | |
| cancel_work_sync(&smu->throttling_logging_work); | |
| cancel_work_sync(&smu->interrupt_work); | |
| ret = smu_disable_thermal_alert(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Fail to disable thermal alert!\n"); | |
| return ret; | |
| } | |
| cancel_delayed_work_sync(&smu->swctf_delayed_work); | |
| ret = smu_disable_dpms(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Fail to disable dpm features!\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int smu_reset_mp1_state(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| int ret = 0; | |
| if ((!adev->in_runpm) && (!adev->in_suspend) && | |
| (!amdgpu_in_reset(adev)) && !smu->is_apu && | |
| amdgpu_ip_version(adev, MP1_HWIP, 0) >= IP_VERSION(13, 0, 0)) | |
| ret = smu_set_mp1_state(smu, PP_MP1_STATE_UNLOAD); | |
| return ret; | |
| } | |
| static int smu_hw_fini(struct amdgpu_ip_block *ip_block) | |
| { | |
| struct amdgpu_device *adev = ip_block->adev; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| int i, ret; | |
| if (amdgpu_sriov_multi_vf_mode(adev)) | |
| return 0; | |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) { | |
| smu_dpm_set_vcn_enable(smu, false, i); | |
| adev->vcn.inst[i].cur_state = AMD_PG_STATE_GATE; | |
| } | |
| smu_dpm_set_jpeg_enable(smu, false); | |
| adev->jpeg.cur_state = AMD_PG_STATE_GATE; | |
| smu_dpm_set_umsch_mm_enable(smu, false); | |
| if (!smu->pm_enabled) | |
| return 0; | |
| adev->pm.dpm_enabled = false; | |
| ret = smu_smc_hw_cleanup(smu); | |
| if (ret) | |
| return ret; | |
| ret = smu_reset_mp1_state(smu); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static void smu_late_fini(struct amdgpu_ip_block *ip_block) | |
| { | |
| struct amdgpu_device *adev = ip_block->adev; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| kfree(smu); | |
| } | |
| static int smu_reset(struct smu_context *smu) | |
| { | |
| struct amdgpu_device *adev = smu->adev; | |
| struct amdgpu_ip_block *ip_block; | |
| int ret; | |
| ip_block = amdgpu_device_ip_get_ip_block(adev, AMD_IP_BLOCK_TYPE_SMC); | |
| if (!ip_block) | |
| return -EINVAL; | |
| ret = smu_hw_fini(ip_block); | |
| if (ret) | |
| return ret; | |
| ret = smu_hw_init(ip_block); | |
| if (ret) | |
| return ret; | |
| ret = smu_late_init(ip_block); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static int smu_suspend(struct amdgpu_ip_block *ip_block) | |
| { | |
| struct amdgpu_device *adev = ip_block->adev; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| int ret; | |
| uint64_t count; | |
| if (amdgpu_sriov_multi_vf_mode(adev)) | |
| return 0; | |
| if (!smu->pm_enabled) | |
| return 0; | |
| adev->pm.dpm_enabled = false; | |
| ret = smu_smc_hw_cleanup(smu); | |
| if (ret) | |
| return ret; | |
| smu->watermarks_bitmap &= ~(WATERMARKS_LOADED); | |
| smu_set_gfx_cgpg(smu, false); | |
| /* | |
| * pwfw resets entrycount when device is suspended, so we save the | |
| * last value to be used when we resume to keep it consistent | |
| */ | |
| ret = smu_get_entrycount_gfxoff(smu, &count); | |
| if (!ret) | |
| adev->gfx.gfx_off_entrycount = count; | |
| /* clear this on suspend so it will get reprogrammed on resume */ | |
| smu->workload_mask = 0; | |
| return 0; | |
| } | |
| static int smu_resume(struct amdgpu_ip_block *ip_block) | |
| { | |
| int ret; | |
| struct amdgpu_device *adev = ip_block->adev; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| if (amdgpu_sriov_multi_vf_mode(adev)) | |
| return 0; | |
| if (!smu->pm_enabled) | |
| return 0; | |
| dev_info(adev->dev, "SMU is resuming...\n"); | |
| ret = smu_start_smc_engine(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "SMC engine is not correctly up!\n"); | |
| return ret; | |
| } | |
| ret = smu_smc_hw_setup(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Failed to setup smc hw!\n"); | |
| return ret; | |
| } | |
| ret = smu_set_gfx_imu_enable(smu); | |
| if (ret) | |
| return ret; | |
| smu_set_gfx_cgpg(smu, true); | |
| smu->disable_uclk_switch = 0; | |
| adev->pm.dpm_enabled = true; | |
| dev_info(adev->dev, "SMU is resumed successfully!\n"); | |
| return 0; | |
| } | |
| static int smu_display_configuration_change(void *handle, | |
| const struct amd_pp_display_configuration *display_config) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!display_config) | |
| return -EINVAL; | |
| smu_set_min_dcef_deep_sleep(smu, | |
| display_config->min_dcef_deep_sleep_set_clk / 100); | |
| return 0; | |
| } | |
| static int smu_set_clockgating_state(struct amdgpu_ip_block *ip_block, | |
| enum amd_clockgating_state state) | |
| { | |
| return 0; | |
| } | |
| static int smu_set_powergating_state(struct amdgpu_ip_block *ip_block, | |
| enum amd_powergating_state state) | |
| { | |
| return 0; | |
| } | |
| static void smu_enter_umd_pstate(struct smu_context *smu) | |
| { | |
| smu_gpo_control(smu, false); | |
| smu_gfx_ulv_control(smu, false); | |
| smu_deep_sleep_control(smu, false); | |
| } | |
| static int smu_enable_umd_pstate(void *handle, | |
| enum amd_dpm_forced_level *level) | |
| { | |
| uint32_t profile_mode_mask = AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD | | |
| AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK | | |
| AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK | | |
| AMD_DPM_FORCED_LEVEL_PROFILE_PEAK; | |
| struct smu_context *smu = (struct smu_context*)(handle); | |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); | |
| if (!smu->is_apu && !smu_dpm_ctx->dpm_context) | |
| return -EINVAL; | |
| if (!(smu_dpm_ctx->dpm_level & profile_mode_mask)) { | |
| /* enter umd pstate, save current level, disable gfx cg*/ | |
| if (*level & profile_mode_mask) { | |
| smu_dpm_ctx->saved_dpm_level = smu_dpm_ctx->dpm_level; | |
| smu_enter_umd_pstate(smu); | |
| amdgpu_asic_update_umd_stable_pstate(smu->adev, true); | |
| } | |
| } else { | |
| /* exit umd pstate, restore level, enable gfx cg*/ | |
| if (!(*level & profile_mode_mask)) { | |
| if (*level == AMD_DPM_FORCED_LEVEL_PROFILE_EXIT) | |
| *level = smu_dpm_ctx->saved_dpm_level; | |
| amdgpu_asic_update_umd_stable_pstate(smu->adev, false); | |
| smu_deep_sleep_control(smu, true); | |
| smu_gfx_ulv_control(smu, true); | |
| smu_gpo_control(smu, true); | |
| } | |
| } | |
| return 0; | |
| } | |
| static int smu_bump_power_profile_mode(struct smu_context *smu, | |
| long *custom_params, | |
| u32 custom_params_max_idx) | |
| { | |
| u32 workload_mask = 0; | |
| int i, ret = 0; | |
| for (i = 0; i < PP_SMC_POWER_PROFILE_COUNT; i++) { | |
| if (smu->workload_refcount[i]) | |
| workload_mask |= 1 << i; | |
| } | |
| if (smu->workload_mask == workload_mask) | |
| return 0; | |
| if (smu->ppt_funcs->set_power_profile_mode) | |
| ret = smu->ppt_funcs->set_power_profile_mode(smu, workload_mask, | |
| custom_params, | |
| custom_params_max_idx); | |
| if (!ret) | |
| smu->workload_mask = workload_mask; | |
| return ret; | |
| } | |
| static void smu_power_profile_mode_get(struct smu_context *smu, | |
| enum PP_SMC_POWER_PROFILE profile_mode) | |
| { | |
| smu->workload_refcount[profile_mode]++; | |
| } | |
| static void smu_power_profile_mode_put(struct smu_context *smu, | |
| enum PP_SMC_POWER_PROFILE profile_mode) | |
| { | |
| if (smu->workload_refcount[profile_mode]) | |
| smu->workload_refcount[profile_mode]--; | |
| } | |
| static int smu_adjust_power_state_dynamic(struct smu_context *smu, | |
| enum amd_dpm_forced_level level, | |
| bool skip_display_settings, | |
| bool force_performance_level) | |
| { | |
| int ret = 0; | |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); | |
| if (!skip_display_settings) { | |
| ret = smu_display_config_changed(smu); | |
| if (ret) { | |
| dev_err(smu->adev->dev, "Failed to change display config!"); | |
| return ret; | |
| } | |
| } | |
| ret = smu_apply_clocks_adjust_rules(smu); | |
| if (ret) { | |
| dev_err(smu->adev->dev, "Failed to apply clocks adjust rules!"); | |
| return ret; | |
| } | |
| if (!skip_display_settings) { | |
| ret = smu_notify_smc_display_config(smu); | |
| if (ret) { | |
| dev_err(smu->adev->dev, "Failed to notify smc display config!"); | |
| return ret; | |
| } | |
| } | |
| if (force_performance_level || smu_dpm_ctx->dpm_level != level) { | |
| ret = smu_asic_set_performance_level(smu, level); | |
| if (ret) { | |
| if (ret == -EOPNOTSUPP) | |
| dev_info(smu->adev->dev, "set performance level %d not supported", | |
| level); | |
| else | |
| dev_err(smu->adev->dev, "Failed to set performance level %d", | |
| level); | |
| return ret; | |
| } | |
| /* update the saved copy */ | |
| smu_dpm_ctx->dpm_level = level; | |
| } | |
| if (smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL && | |
| smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM) | |
| smu_bump_power_profile_mode(smu, NULL, 0); | |
| return ret; | |
| } | |
| static int | |
| smu_reapply_power_state_dynamic(struct smu_context *smu, | |
| enum amd_dpm_forced_level level) | |
| { | |
| struct smu_dpm_context *smu_dpm_ctx = &smu->smu_dpm; | |
| int ret; | |
| ret = smu_apply_clocks_adjust_rules(smu); | |
| if (ret) { | |
| dev_err(smu->adev->dev, "Failed to apply clocks adjust rules!"); | |
| return ret; | |
| } | |
| ret = smu_asic_set_performance_level(smu, level); | |
| if (ret) { | |
| if (ret == -EOPNOTSUPP) | |
| dev_info(smu->adev->dev, "set performance level %d not supported", | |
| level); | |
| else | |
| dev_err(smu->adev->dev, "Failed to set performance level %d", | |
| level); | |
| return ret; | |
| } | |
| smu_dpm_ctx->dpm_level = level; | |
| if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL || | |
| smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM) | |
| return 0; | |
| return smu_bump_power_profile_mode(smu, NULL, 0); | |
| } | |
| static int smu_handle_task(struct smu_context *smu, | |
| enum amd_dpm_forced_level level, | |
| enum amd_pp_task task_id) | |
| { | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| switch (task_id) { | |
| case AMD_PP_TASK_DISPLAY_CONFIG_CHANGE: | |
| ret = smu_pre_display_config_changed(smu); | |
| if (ret) | |
| return ret; | |
| ret = smu_adjust_power_state_dynamic(smu, level, false, false); | |
| break; | |
| case AMD_PP_TASK_COMPLETE_INIT: | |
| ret = smu_adjust_power_state_dynamic(smu, level, true, false); | |
| break; | |
| case AMD_PP_TASK_READJUST_POWER_STATE: | |
| ret = smu_adjust_power_state_dynamic(smu, level, true, false); | |
| break; | |
| default: | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int smu_handle_dpm_task(void *handle, | |
| enum amd_pp_task task_id, | |
| enum amd_pm_state_type *user_state) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; | |
| return smu_handle_task(smu, smu_dpm->dpm_level, task_id); | |
| } | |
| static int smu_switch_power_profile(void *handle, | |
| enum PP_SMC_POWER_PROFILE type, | |
| bool enable) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); | |
| int ret; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!(type < PP_SMC_POWER_PROFILE_CUSTOM)) | |
| return -EINVAL; | |
| if (smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL && | |
| smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM) { | |
| if (enable) | |
| smu_power_profile_mode_get(smu, type); | |
| else | |
| smu_power_profile_mode_put(smu, type); | |
| /* don't switch the active workload when paused */ | |
| if (smu->pause_workload) | |
| ret = 0; | |
| else | |
| ret = smu_bump_power_profile_mode(smu, NULL, 0); | |
| if (ret) { | |
| if (enable) | |
| smu_power_profile_mode_put(smu, type); | |
| else | |
| smu_power_profile_mode_get(smu, type); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int smu_pause_power_profile(void *handle, | |
| bool pause) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); | |
| u32 workload_mask = 1 << PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; | |
| int ret; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL && | |
| smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM) { | |
| smu->pause_workload = pause; | |
| /* force to bootup default profile */ | |
| if (smu->pause_workload && smu->ppt_funcs->set_power_profile_mode) | |
| ret = smu->ppt_funcs->set_power_profile_mode(smu, | |
| workload_mask, | |
| NULL, | |
| 0); | |
| else | |
| ret = smu_bump_power_profile_mode(smu, NULL, 0); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static enum amd_dpm_forced_level smu_get_performance_level(void *handle) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->is_apu && !smu_dpm_ctx->dpm_context) | |
| return -EINVAL; | |
| return smu_dpm_ctx->dpm_level; | |
| } | |
| static int smu_force_performance_level(void *handle, | |
| enum amd_dpm_forced_level level) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->is_apu && !smu_dpm_ctx->dpm_context) | |
| return -EINVAL; | |
| ret = smu_enable_umd_pstate(smu, &level); | |
| if (ret) | |
| return ret; | |
| ret = smu_handle_task(smu, level, | |
| AMD_PP_TASK_READJUST_POWER_STATE); | |
| /* reset user dpm clock state */ | |
| if (!ret && smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL) { | |
| memset(smu->user_dpm_profile.clk_mask, 0, sizeof(smu->user_dpm_profile.clk_mask)); | |
| smu->user_dpm_profile.clk_dependency = 0; | |
| } | |
| return ret; | |
| } | |
| static int | |
| smu_reapply_performance_level(void *handle, | |
| enum amd_dpm_forced_level level) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_dpm_context *smu_dpm_ctx = &smu->smu_dpm; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->is_apu && !smu_dpm_ctx->dpm_context) | |
| return -EINVAL; | |
| switch (level) { | |
| case AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD: | |
| case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK: | |
| case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK: | |
| case AMD_DPM_FORCED_LEVEL_PROFILE_PEAK: | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (smu_dpm_ctx->dpm_level != level) | |
| return -EINVAL; | |
| smu_enter_umd_pstate(smu); | |
| return smu_reapply_power_state_dynamic(smu, level); | |
| } | |
| static int smu_set_display_count(void *handle, uint32_t count) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| return smu_init_display_count(smu, count); | |
| } | |
| static int smu_force_smuclk_levels(struct smu_context *smu, | |
| enum smu_clk_type clk_type, | |
| uint32_t mask) | |
| { | |
| struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm); | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL) { | |
| dev_dbg(smu->adev->dev, "force clock level is for dpm manual mode only.\n"); | |
| return -EINVAL; | |
| } | |
| if (smu->ppt_funcs && smu->ppt_funcs->force_clk_levels) { | |
| ret = smu->ppt_funcs->force_clk_levels(smu, clk_type, mask); | |
| if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) { | |
| smu->user_dpm_profile.clk_mask[clk_type] = mask; | |
| smu_set_user_clk_dependencies(smu, clk_type); | |
| } | |
| } | |
| return ret; | |
| } | |
| static int smu_force_ppclk_levels(void *handle, | |
| enum pp_clock_type type, | |
| uint32_t mask) | |
| { | |
| struct smu_context *smu = handle; | |
| enum smu_clk_type clk_type; | |
| switch (type) { | |
| case PP_SCLK: | |
| clk_type = SMU_SCLK; break; | |
| case PP_MCLK: | |
| clk_type = SMU_MCLK; break; | |
| case PP_PCIE: | |
| clk_type = SMU_PCIE; break; | |
| case PP_SOCCLK: | |
| clk_type = SMU_SOCCLK; break; | |
| case PP_FCLK: | |
| clk_type = SMU_FCLK; break; | |
| case PP_DCEFCLK: | |
| clk_type = SMU_DCEFCLK; break; | |
| case PP_VCLK: | |
| clk_type = SMU_VCLK; break; | |
| case PP_VCLK1: | |
| clk_type = SMU_VCLK1; break; | |
| case PP_DCLK: | |
| clk_type = SMU_DCLK; break; | |
| case PP_DCLK1: | |
| clk_type = SMU_DCLK1; break; | |
| case OD_SCLK: | |
| clk_type = SMU_OD_SCLK; break; | |
| case OD_MCLK: | |
| clk_type = SMU_OD_MCLK; break; | |
| case OD_VDDC_CURVE: | |
| clk_type = SMU_OD_VDDC_CURVE; break; | |
| case OD_RANGE: | |
| clk_type = SMU_OD_RANGE; break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return smu_force_smuclk_levels(smu, clk_type, mask); | |
| } | |
| /* | |
| * On system suspending or resetting, the dpm_enabled | |
| * flag will be cleared. So that those SMU services which | |
| * are not supported will be gated. | |
| * However, the mp1 state setting should still be granted | |
| * even if the dpm_enabled cleared. | |
| */ | |
| static int smu_set_mp1_state(void *handle, | |
| enum pp_mp1_state mp1_state) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs && | |
| smu->ppt_funcs->set_mp1_state) | |
| ret = smu->ppt_funcs->set_mp1_state(smu, mp1_state); | |
| return ret; | |
| } | |
| static int smu_set_df_cstate(void *handle, | |
| enum pp_df_cstate state) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs || !smu->ppt_funcs->set_df_cstate) | |
| return 0; | |
| ret = smu->ppt_funcs->set_df_cstate(smu, state); | |
| if (ret) | |
| dev_err(smu->adev->dev, "[SetDfCstate] failed!\n"); | |
| return ret; | |
| } | |
| int smu_write_watermarks_table(struct smu_context *smu) | |
| { | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| return smu_set_watermarks_table(smu, NULL); | |
| } | |
| static int smu_set_watermarks_for_clock_ranges(void *handle, | |
| struct pp_smu_wm_range_sets *clock_ranges) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->disable_watermark) | |
| return 0; | |
| return smu_set_watermarks_table(smu, clock_ranges); | |
| } | |
| static int smu_set_ac_dc(struct smu_context *smu) | |
| { | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| /* controlled by firmware */ | |
| if (!smu->dc_controlled_by_gpio) { | |
| ret = smu_set_power_source(smu, | |
| smu->adev->pm.ac_power ? | |
| SMU_POWER_SOURCE_AC : | |
| SMU_POWER_SOURCE_DC); | |
| if (ret) { | |
| dev_err(smu->adev->dev, "Failed to switch to %s mode!\n", | |
| smu->adev->pm.ac_power ? "AC" : "DC"); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void smu_notify_ac_dc(void *handle) | |
| { | |
| struct smu_context *smu = handle; | |
| if (smu_set_ac_dc(smu)) | |
| return; | |
| smu_restore_ppt_limits(smu, true); | |
| } | |
| const struct amd_ip_funcs smu_ip_funcs = { | |
| .name = "smu", | |
| .early_init = smu_early_init, | |
| .late_init = smu_late_init, | |
| .sw_init = smu_sw_init, | |
| .sw_fini = smu_sw_fini, | |
| .hw_init = smu_hw_init, | |
| .hw_fini = smu_hw_fini, | |
| .late_fini = smu_late_fini, | |
| .suspend = smu_suspend, | |
| .resume = smu_resume, | |
| .wait_for_idle = NULL, | |
| .soft_reset = NULL, | |
| .set_clockgating_state = smu_set_clockgating_state, | |
| .set_powergating_state = smu_set_powergating_state, | |
| }; | |
| const struct amdgpu_ip_block_version smu_v11_0_ip_block = { | |
| .type = AMD_IP_BLOCK_TYPE_SMC, | |
| .major = 11, | |
| .minor = 0, | |
| .rev = 0, | |
| .funcs = &smu_ip_funcs, | |
| }; | |
| const struct amdgpu_ip_block_version smu_v12_0_ip_block = { | |
| .type = AMD_IP_BLOCK_TYPE_SMC, | |
| .major = 12, | |
| .minor = 0, | |
| .rev = 0, | |
| .funcs = &smu_ip_funcs, | |
| }; | |
| const struct amdgpu_ip_block_version smu_v13_0_ip_block = { | |
| .type = AMD_IP_BLOCK_TYPE_SMC, | |
| .major = 13, | |
| .minor = 0, | |
| .rev = 0, | |
| .funcs = &smu_ip_funcs, | |
| }; | |
| const struct amdgpu_ip_block_version smu_v14_0_ip_block = { | |
| .type = AMD_IP_BLOCK_TYPE_SMC, | |
| .major = 14, | |
| .minor = 0, | |
| .rev = 0, | |
| .funcs = &smu_ip_funcs, | |
| }; | |
| const struct amdgpu_ip_block_version smu_v15_0_ip_block = { | |
| .type = AMD_IP_BLOCK_TYPE_SMC, | |
| .major = 15, | |
| .minor = 0, | |
| .rev = 0, | |
| .funcs = &smu_ip_funcs, | |
| }; | |
| static int smu_load_microcode(void *handle) | |
| { | |
| struct smu_context *smu = handle; | |
| struct amdgpu_device *adev = smu->adev; | |
| int ret = 0; | |
| if (!smu->pm_enabled) | |
| return -EOPNOTSUPP; | |
| /* This should be used for non PSP loading */ | |
| if (adev->firmware.load_type == AMDGPU_FW_LOAD_PSP) | |
| return 0; | |
| if (smu->ppt_funcs->load_microcode) { | |
| ret = smu->ppt_funcs->load_microcode(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "Load microcode failed\n"); | |
| return ret; | |
| } | |
| } | |
| if (smu->ppt_funcs->check_fw_status) { | |
| ret = smu->ppt_funcs->check_fw_status(smu); | |
| if (ret) { | |
| dev_err(adev->dev, "SMC is not ready\n"); | |
| return ret; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int smu_set_gfx_cgpg(struct smu_context *smu, bool enabled) | |
| { | |
| int ret = 0; | |
| if (smu->ppt_funcs->set_gfx_cgpg) | |
| ret = smu->ppt_funcs->set_gfx_cgpg(smu, enabled); | |
| return ret; | |
| } | |
| static int smu_set_fan_speed_rpm(void *handle, uint32_t speed) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs->set_fan_speed_rpm) | |
| return -EOPNOTSUPP; | |
| if (speed == U32_MAX) | |
| return -EINVAL; | |
| ret = smu->ppt_funcs->set_fan_speed_rpm(smu, speed); | |
| if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) { | |
| smu->user_dpm_profile.flags |= SMU_CUSTOM_FAN_SPEED_RPM; | |
| smu->user_dpm_profile.fan_speed_rpm = speed; | |
| /* Override custom PWM setting as they cannot co-exist */ | |
| smu->user_dpm_profile.flags &= ~SMU_CUSTOM_FAN_SPEED_PWM; | |
| smu->user_dpm_profile.fan_speed_pwm = 0; | |
| } | |
| return ret; | |
| } | |
| /** | |
| * smu_get_ppt_limit - Request one of the SMU PPT limits | |
| * | |
| * @handle: pointer to smu context | |
| * @limit: requested limit is written back to this variable | |
| * @pp_limit_level: &pp_power_limit_level which limit of the power to return | |
| * @pp_power_type: &pp_power_type type of power | |
| * Return: 0 on success, <0 on error | |
| * | |
| */ | |
| int smu_get_ppt_limit(void *handle, | |
| uint32_t *limit, | |
| enum pp_power_limit_level pp_limit_level, | |
| enum pp_power_type pp_power_type) | |
| { | |
| struct smu_context *smu = handle; | |
| enum smu_power_src_type power_source; | |
| enum smu_ppt_limit_level limit_level; | |
| uint32_t limit_type; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!limit) | |
| return -EINVAL; | |
| power_source = smu->adev->pm.ac_power ? | |
| SMU_POWER_SOURCE_AC : SMU_POWER_SOURCE_DC; | |
| switch (pp_power_type) { | |
| case PP_PWR_TYPE_SUSTAINED: | |
| limit_type = SMU_SLOW_PPT_LIMIT; | |
| break; | |
| case PP_PWR_TYPE_FAST: | |
| limit_type = SMU_FAST_PPT_LIMIT; | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| switch (pp_limit_level) { | |
| case PP_PWR_LIMIT_CURRENT: | |
| limit_level = SMU_PPT_LIMIT_CURRENT; | |
| break; | |
| case PP_PWR_LIMIT_DEFAULT: | |
| limit_level = SMU_PPT_LIMIT_DEFAULT; | |
| break; | |
| case PP_PWR_LIMIT_MAX: | |
| limit_level = SMU_PPT_LIMIT_MAX; | |
| break; | |
| case PP_PWR_LIMIT_MIN: | |
| limit_level = SMU_PPT_LIMIT_MIN; | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| if (!(smu->ppt_limits.supported_mask & BIT(limit_type))) | |
| return -EOPNOTSUPP; | |
| switch (limit_level) { | |
| case SMU_PPT_LIMIT_CURRENT: | |
| ret = smu_get_asic_ppt_limit(smu, limit_type, limit); | |
| break; | |
| case SMU_PPT_LIMIT_DEFAULT: | |
| *limit = smu->ppt_limits.range[power_source][limit_type].default_value; | |
| break; | |
| case SMU_PPT_LIMIT_MAX: | |
| *limit = smu->od_enabled ? | |
| smu->ppt_limits.range[power_source][limit_type].od_max : | |
| smu->ppt_limits.range[power_source][limit_type].max; | |
| break; | |
| case SMU_PPT_LIMIT_MIN: | |
| *limit = smu->od_enabled ? | |
| smu->ppt_limits.range[power_source][limit_type].od_min : | |
| smu->ppt_limits.range[power_source][limit_type].min; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return ret; | |
| } | |
| static int smu_set_ppt_limit(void *handle, uint32_t limit_type, uint32_t limit) | |
| { | |
| struct smu_context *smu = handle; | |
| enum smu_power_src_type power_source; | |
| struct smu_ppt_limit_range *range; | |
| uint32_t min_limit, max_limit; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (limit_type >= SMU_LIMIT_TYPE_COUNT) | |
| return -EINVAL; | |
| power_source = smu->adev->pm.ac_power ? | |
| SMU_POWER_SOURCE_AC : SMU_POWER_SOURCE_DC; | |
| range = &smu->ppt_limits.range[power_source][limit_type]; | |
| min_limit = smu->od_enabled ? range->od_min : range->min; | |
| max_limit = smu->od_enabled ? range->od_max : range->max; | |
| if (!(smu->ppt_limits.supported_mask & BIT(limit_type))) | |
| return -EOPNOTSUPP; | |
| if (limit_type == SMU_DEFAULT_PPT_LIMIT && !limit) { | |
| ret = smu_get_asic_ppt_limit(smu, limit_type, &limit); | |
| if (ret) | |
| return ret; | |
| } | |
| if (limit > max_limit || limit < min_limit) { | |
| dev_err(smu->adev->dev, | |
| "New PPT limit (%d) is out of range [%d,%d]\n", | |
| limit, min_limit, max_limit); | |
| return -EINVAL; | |
| } | |
| if (!smu->ppt_funcs->set_ppt_limit) | |
| return -EOPNOTSUPP; | |
| ret = smu->ppt_funcs->set_ppt_limit(smu, limit_type, limit); | |
| if (ret) | |
| return ret; | |
| if (!(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) { | |
| smu->user_dpm_profile.ppt_limits[power_source][limit_type] = limit; | |
| smu->user_dpm_profile.ppt_limit_user_mask[power_source] |= | |
| BIT(limit_type); | |
| } | |
| return 0; | |
| } | |
| static enum smu_clk_type smu_convert_to_smuclk(enum pp_clock_type type) | |
| { | |
| enum smu_clk_type clk_type; | |
| switch (type) { | |
| case PP_SCLK: | |
| clk_type = SMU_SCLK; break; | |
| case PP_MCLK: | |
| clk_type = SMU_MCLK; break; | |
| case PP_PCIE: | |
| clk_type = SMU_PCIE; break; | |
| case PP_SOCCLK: | |
| clk_type = SMU_SOCCLK; break; | |
| case PP_FCLK: | |
| clk_type = SMU_FCLK; break; | |
| case PP_DCEFCLK: | |
| clk_type = SMU_DCEFCLK; break; | |
| case PP_VCLK: | |
| clk_type = SMU_VCLK; break; | |
| case PP_VCLK1: | |
| clk_type = SMU_VCLK1; break; | |
| case PP_DCLK: | |
| clk_type = SMU_DCLK; break; | |
| case PP_DCLK1: | |
| clk_type = SMU_DCLK1; break; | |
| case PP_ISPICLK: | |
| clk_type = SMU_ISPICLK; | |
| break; | |
| case PP_ISPXCLK: | |
| clk_type = SMU_ISPXCLK; | |
| break; | |
| case OD_SCLK: | |
| clk_type = SMU_OD_SCLK; break; | |
| case OD_MCLK: | |
| clk_type = SMU_OD_MCLK; break; | |
| case OD_FCLK: | |
| clk_type = SMU_OD_FCLK; break; | |
| case OD_VDDC_CURVE: | |
| clk_type = SMU_OD_VDDC_CURVE; break; | |
| case OD_RANGE: | |
| clk_type = SMU_OD_RANGE; break; | |
| case OD_VDDGFX_OFFSET: | |
| clk_type = SMU_OD_VDDGFX_OFFSET; break; | |
| case OD_CCLK: | |
| clk_type = SMU_OD_CCLK; break; | |
| case OD_FAN_CURVE: | |
| clk_type = SMU_OD_FAN_CURVE; break; | |
| case OD_ACOUSTIC_LIMIT: | |
| clk_type = SMU_OD_ACOUSTIC_LIMIT; break; | |
| case OD_ACOUSTIC_TARGET: | |
| clk_type = SMU_OD_ACOUSTIC_TARGET; break; | |
| case OD_FAN_TARGET_TEMPERATURE: | |
| clk_type = SMU_OD_FAN_TARGET_TEMPERATURE; break; | |
| case OD_FAN_MINIMUM_PWM: | |
| clk_type = SMU_OD_FAN_MINIMUM_PWM; break; | |
| case OD_FAN_ZERO_RPM_ENABLE: | |
| clk_type = SMU_OD_FAN_ZERO_RPM_ENABLE; break; | |
| case OD_FAN_ZERO_RPM_STOP_TEMP: | |
| clk_type = SMU_OD_FAN_ZERO_RPM_STOP_TEMP; break; | |
| default: | |
| clk_type = SMU_CLK_COUNT; break; | |
| } | |
| return clk_type; | |
| } | |
| static int smu_emit_ppclk_levels(void *handle, enum pp_clock_type type, char *buf, int *offset) | |
| { | |
| struct smu_context *smu = handle; | |
| enum smu_clk_type clk_type; | |
| clk_type = smu_convert_to_smuclk(type); | |
| if (clk_type == SMU_CLK_COUNT) | |
| return -EINVAL; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs->emit_clk_levels) | |
| return -ENOENT; | |
| return smu->ppt_funcs->emit_clk_levels(smu, clk_type, buf, offset); | |
| } | |
| static int smu_od_edit_dpm_table(void *handle, | |
| enum PP_OD_DPM_TABLE_COMMAND type, | |
| long *input, uint32_t size) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->od_edit_dpm_table) { | |
| ret = smu->ppt_funcs->od_edit_dpm_table(smu, type, input, size); | |
| } | |
| return ret; | |
| } | |
| static int smu_read_sensor(void *handle, | |
| int sensor, | |
| void *data, | |
| int *size_arg) | |
| { | |
| struct smu_context *smu = handle; | |
| struct amdgpu_device *adev = smu->adev; | |
| struct smu_umd_pstate_table *pstate_table = | |
| &smu->pstate_table; | |
| int i, ret = 0; | |
| uint32_t *size, size_val; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!data || !size_arg) | |
| return -EINVAL; | |
| size_val = *size_arg; | |
| size = &size_val; | |
| if (smu->ppt_funcs->read_sensor) | |
| if (!smu->ppt_funcs->read_sensor(smu, sensor, data, size)) | |
| goto unlock; | |
| switch (sensor) { | |
| case AMDGPU_PP_SENSOR_STABLE_PSTATE_SCLK: | |
| *((uint32_t *)data) = pstate_table->gfxclk_pstate.standard * 100; | |
| *size = 4; | |
| break; | |
| case AMDGPU_PP_SENSOR_STABLE_PSTATE_MCLK: | |
| *((uint32_t *)data) = pstate_table->uclk_pstate.standard * 100; | |
| *size = 4; | |
| break; | |
| case AMDGPU_PP_SENSOR_PEAK_PSTATE_SCLK: | |
| *((uint32_t *)data) = pstate_table->gfxclk_pstate.peak * 100; | |
| *size = 4; | |
| break; | |
| case AMDGPU_PP_SENSOR_PEAK_PSTATE_MCLK: | |
| *((uint32_t *)data) = pstate_table->uclk_pstate.peak * 100; | |
| *size = 4; | |
| break; | |
| case AMDGPU_PP_SENSOR_ENABLED_SMC_FEATURES_MASK: { | |
| struct smu_feature_bits feature_mask; | |
| uint32_t features[2]; | |
| /* TBD: need to handle for > 64 bits */ | |
| ret = smu_feature_get_enabled_mask(smu, &feature_mask); | |
| if (!ret) { | |
| smu_feature_bits_to_arr32(&feature_mask, features, 64); | |
| *(uint64_t *)data = *(uint64_t *)features; | |
| } | |
| *size = 8; | |
| break; | |
| } | |
| case AMDGPU_PP_SENSOR_UVD_POWER: | |
| *(uint32_t *)data = smu_feature_is_enabled(smu, SMU_FEATURE_DPM_UVD_BIT) ? 1 : 0; | |
| *size = 4; | |
| break; | |
| case AMDGPU_PP_SENSOR_VCE_POWER: | |
| *(uint32_t *)data = smu_feature_is_enabled(smu, SMU_FEATURE_DPM_VCE_BIT) ? 1 : 0; | |
| *size = 4; | |
| break; | |
| case AMDGPU_PP_SENSOR_VCN_POWER_STATE: | |
| *(uint32_t *)data = 0; | |
| for (i = 0; i < adev->vcn.num_vcn_inst; i++) { | |
| if (!atomic_read(&smu->smu_power.power_gate.vcn_gated[i])) { | |
| *(uint32_t *)data = 1; | |
| break; | |
| } | |
| } | |
| *size = 4; | |
| break; | |
| case AMDGPU_PP_SENSOR_MIN_FAN_RPM: | |
| *(uint32_t *)data = 0; | |
| *size = 4; | |
| break; | |
| default: | |
| *size = 0; | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| unlock: | |
| // assign uint32_t to int | |
| *size_arg = size_val; | |
| return ret; | |
| } | |
| static int smu_get_apu_thermal_limit(void *handle, uint32_t *limit) | |
| { | |
| int ret = -EOPNOTSUPP; | |
| struct smu_context *smu = handle; | |
| if (smu->ppt_funcs && smu->ppt_funcs->get_apu_thermal_limit) | |
| ret = smu->ppt_funcs->get_apu_thermal_limit(smu, limit); | |
| return ret; | |
| } | |
| static int smu_set_apu_thermal_limit(void *handle, uint32_t limit) | |
| { | |
| int ret = -EOPNOTSUPP; | |
| struct smu_context *smu = handle; | |
| if (smu->ppt_funcs && smu->ppt_funcs->set_apu_thermal_limit) | |
| ret = smu->ppt_funcs->set_apu_thermal_limit(smu, limit); | |
| return ret; | |
| } | |
| static int smu_get_power_profile_mode(void *handle, char *buf) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled || | |
| !smu->ppt_funcs->get_power_profile_mode) | |
| return -EOPNOTSUPP; | |
| if (!buf) | |
| return -EINVAL; | |
| return smu->ppt_funcs->get_power_profile_mode(smu, buf); | |
| } | |
| static int smu_set_power_profile_mode(void *handle, | |
| long *param, | |
| uint32_t param_size) | |
| { | |
| struct smu_context *smu = handle; | |
| bool custom = false; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled || | |
| !smu->ppt_funcs->set_power_profile_mode) | |
| return -EOPNOTSUPP; | |
| if (param[param_size] == PP_SMC_POWER_PROFILE_CUSTOM) { | |
| custom = true; | |
| /* clear frontend mask so custom changes propogate */ | |
| smu->workload_mask = 0; | |
| } | |
| if ((param[param_size] != smu->power_profile_mode) || custom) { | |
| /* clear the old user preference */ | |
| smu_power_profile_mode_put(smu, smu->power_profile_mode); | |
| /* set the new user preference */ | |
| smu_power_profile_mode_get(smu, param[param_size]); | |
| ret = smu_bump_power_profile_mode(smu, | |
| custom ? param : NULL, | |
| custom ? param_size : 0); | |
| if (ret) | |
| smu_power_profile_mode_put(smu, param[param_size]); | |
| else | |
| /* store the user's preference */ | |
| smu->power_profile_mode = param[param_size]; | |
| } | |
| return ret; | |
| } | |
| static int smu_get_fan_control_mode(void *handle, u32 *fan_mode) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs->get_fan_control_mode) | |
| return -EOPNOTSUPP; | |
| if (!fan_mode) | |
| return -EINVAL; | |
| *fan_mode = smu->ppt_funcs->get_fan_control_mode(smu); | |
| return 0; | |
| } | |
| static int smu_set_fan_control_mode(void *handle, u32 value) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs->set_fan_control_mode) | |
| return -EOPNOTSUPP; | |
| if (value == U32_MAX) | |
| return -EINVAL; | |
| ret = smu->ppt_funcs->set_fan_control_mode(smu, value); | |
| if (ret) | |
| goto out; | |
| if (!(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) { | |
| smu->user_dpm_profile.fan_mode = value; | |
| /* reset user dpm fan speed */ | |
| if (value != AMD_FAN_CTRL_MANUAL) { | |
| smu->user_dpm_profile.fan_speed_pwm = 0; | |
| smu->user_dpm_profile.fan_speed_rpm = 0; | |
| smu->user_dpm_profile.flags &= ~(SMU_CUSTOM_FAN_SPEED_RPM | SMU_CUSTOM_FAN_SPEED_PWM); | |
| } | |
| } | |
| out: | |
| return ret; | |
| } | |
| static int smu_get_fan_speed_pwm(void *handle, u32 *speed) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs->get_fan_speed_pwm) | |
| return -EOPNOTSUPP; | |
| if (!speed) | |
| return -EINVAL; | |
| ret = smu->ppt_funcs->get_fan_speed_pwm(smu, speed); | |
| return ret; | |
| } | |
| static int smu_set_fan_speed_pwm(void *handle, u32 speed) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs->set_fan_speed_pwm) | |
| return -EOPNOTSUPP; | |
| if (speed == U32_MAX) | |
| return -EINVAL; | |
| ret = smu->ppt_funcs->set_fan_speed_pwm(smu, speed); | |
| if (!ret && !(smu->user_dpm_profile.flags & SMU_DPM_USER_PROFILE_RESTORE)) { | |
| smu->user_dpm_profile.flags |= SMU_CUSTOM_FAN_SPEED_PWM; | |
| smu->user_dpm_profile.fan_speed_pwm = speed; | |
| /* Override custom RPM setting as they cannot co-exist */ | |
| smu->user_dpm_profile.flags &= ~SMU_CUSTOM_FAN_SPEED_RPM; | |
| smu->user_dpm_profile.fan_speed_rpm = 0; | |
| } | |
| return ret; | |
| } | |
| static int smu_get_fan_speed_rpm(void *handle, uint32_t *speed) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs->get_fan_speed_rpm) | |
| return -EOPNOTSUPP; | |
| if (!speed) | |
| return -EINVAL; | |
| ret = smu->ppt_funcs->get_fan_speed_rpm(smu, speed); | |
| return ret; | |
| } | |
| static int smu_set_deep_sleep_dcefclk(void *handle, uint32_t clk) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| return smu_set_min_dcef_deep_sleep(smu, clk); | |
| } | |
| static int smu_get_clock_by_type_with_latency(void *handle, | |
| enum amd_pp_clock_type type, | |
| struct pp_clock_levels_with_latency *clocks) | |
| { | |
| struct smu_context *smu = handle; | |
| enum smu_clk_type clk_type; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->get_clock_by_type_with_latency) { | |
| switch (type) { | |
| case amd_pp_sys_clock: | |
| clk_type = SMU_GFXCLK; | |
| break; | |
| case amd_pp_mem_clock: | |
| clk_type = SMU_MCLK; | |
| break; | |
| case amd_pp_dcef_clock: | |
| clk_type = SMU_DCEFCLK; | |
| break; | |
| case amd_pp_disp_clock: | |
| clk_type = SMU_DISPCLK; | |
| break; | |
| default: | |
| dev_err(smu->adev->dev, "Invalid clock type!\n"); | |
| return -EINVAL; | |
| } | |
| ret = smu->ppt_funcs->get_clock_by_type_with_latency(smu, clk_type, clocks); | |
| } | |
| return ret; | |
| } | |
| static int smu_display_clock_voltage_request(void *handle, | |
| struct pp_display_clock_request *clock_req) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->display_clock_voltage_request) | |
| ret = smu->ppt_funcs->display_clock_voltage_request(smu, clock_req); | |
| return ret; | |
| } | |
| static int smu_display_disable_memory_clock_switch(void *handle, | |
| bool disable_memory_clock_switch) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = -EINVAL; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->display_disable_memory_clock_switch) | |
| ret = smu->ppt_funcs->display_disable_memory_clock_switch(smu, disable_memory_clock_switch); | |
| return ret; | |
| } | |
| static int smu_set_xgmi_pstate(void *handle, | |
| uint32_t pstate) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->set_xgmi_pstate) | |
| ret = smu->ppt_funcs->set_xgmi_pstate(smu, pstate); | |
| if (ret) | |
| dev_err(smu->adev->dev, "Failed to set XGMI pstate!\n"); | |
| return ret; | |
| } | |
| static int smu_get_baco_capability(void *handle) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled) | |
| return false; | |
| if (!smu->ppt_funcs || !smu->ppt_funcs->get_bamaco_support) | |
| return false; | |
| return smu->ppt_funcs->get_bamaco_support(smu); | |
| } | |
| static int smu_baco_set_state(void *handle, int state) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled) | |
| return -EOPNOTSUPP; | |
| if (state == 0) { | |
| if (smu->ppt_funcs->baco_exit) | |
| ret = smu->ppt_funcs->baco_exit(smu); | |
| } else if (state == 1) { | |
| if (smu->ppt_funcs->baco_enter) | |
| ret = smu->ppt_funcs->baco_enter(smu); | |
| } else { | |
| return -EINVAL; | |
| } | |
| if (ret) | |
| dev_err(smu->adev->dev, "Failed to %s BACO state!\n", | |
| (state)?"enter":"exit"); | |
| return ret; | |
| } | |
| bool smu_mode1_reset_is_support(struct smu_context *smu) | |
| { | |
| bool ret = false; | |
| if (!smu->pm_enabled) | |
| return false; | |
| if (smu->ppt_funcs && smu->ppt_funcs->mode1_reset_is_support) | |
| ret = smu->ppt_funcs->mode1_reset_is_support(smu); | |
| return ret; | |
| } | |
| bool smu_link_reset_is_support(struct smu_context *smu) | |
| { | |
| if (!smu->pm_enabled) | |
| return false; | |
| return smu_feature_cap_test(smu, SMU_FEATURE_CAP_ID__LINK_RESET); | |
| } | |
| int smu_mode1_reset(struct smu_context *smu) | |
| { | |
| int ret = 0; | |
| if (!smu->pm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->mode1_reset) | |
| ret = smu->ppt_funcs->mode1_reset(smu); | |
| return ret; | |
| } | |
| static int smu_mode2_reset(void *handle) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->mode2_reset) | |
| ret = smu->ppt_funcs->mode2_reset(smu); | |
| if (ret) | |
| dev_err(smu->adev->dev, "Mode2 reset failed!\n"); | |
| return ret; | |
| } | |
| int smu_link_reset(struct smu_context *smu) | |
| { | |
| int ret = 0; | |
| if (!smu->pm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->link_reset) | |
| ret = smu->ppt_funcs->link_reset(smu); | |
| return ret; | |
| } | |
| static int smu_enable_gfx_features(void *handle) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->enable_gfx_features) | |
| ret = smu->ppt_funcs->enable_gfx_features(smu); | |
| if (ret) | |
| dev_err(smu->adev->dev, "enable gfx features failed!\n"); | |
| return ret; | |
| } | |
| static int smu_get_max_sustainable_clocks_by_dc(void *handle, | |
| struct pp_smu_nv_clock_table *max_clocks) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->get_max_sustainable_clocks_by_dc) | |
| ret = smu->ppt_funcs->get_max_sustainable_clocks_by_dc(smu, max_clocks); | |
| return ret; | |
| } | |
| static int smu_get_uclk_dpm_states(void *handle, | |
| unsigned int *clock_values_in_khz, | |
| unsigned int *num_states) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->get_uclk_dpm_states) | |
| ret = smu->ppt_funcs->get_uclk_dpm_states(smu, clock_values_in_khz, num_states); | |
| return ret; | |
| } | |
| static enum amd_pm_state_type smu_get_current_power_state(void *handle) | |
| { | |
| struct smu_context *smu = handle; | |
| enum amd_pm_state_type pm_state = POWER_STATE_TYPE_DEFAULT; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->get_current_power_state) | |
| pm_state = smu->ppt_funcs->get_current_power_state(smu); | |
| return pm_state; | |
| } | |
| static int smu_get_dpm_clock_table(void *handle, | |
| struct dpm_clocks *clock_table) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->get_dpm_clock_table) | |
| ret = smu->ppt_funcs->get_dpm_clock_table(smu, clock_table); | |
| return ret; | |
| } | |
| static ssize_t smu_sys_get_gpu_metrics(void *handle, void **table) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_driver_table *driver_tables = smu_table->driver_tables; | |
| struct smu_driver_table *gpu_metrics_table; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs->get_gpu_metrics) | |
| return -EOPNOTSUPP; | |
| gpu_metrics_table = &driver_tables[SMU_DRIVER_TABLE_GPU_METRICS]; | |
| /* If cached table is valid, return it */ | |
| if (smu_driver_table_is_valid(gpu_metrics_table)) { | |
| *table = gpu_metrics_table->cache.buffer; | |
| return gpu_metrics_table->cache.size; | |
| } | |
| return smu->ppt_funcs->get_gpu_metrics(smu, table); | |
| } | |
| static ssize_t smu_sys_get_pm_metrics(void *handle, void *pm_metrics, | |
| size_t size) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs->get_pm_metrics) | |
| return -EOPNOTSUPP; | |
| return smu->ppt_funcs->get_pm_metrics(smu, pm_metrics, size); | |
| } | |
| static int smu_enable_mgpu_fan_boost(void *handle) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (smu->ppt_funcs->enable_mgpu_fan_boost) | |
| ret = smu->ppt_funcs->enable_mgpu_fan_boost(smu); | |
| return ret; | |
| } | |
| static int smu_gfx_state_change_set(void *handle, | |
| uint32_t state) | |
| { | |
| struct smu_context *smu = handle; | |
| int ret = 0; | |
| if (smu->ppt_funcs->gfx_state_change_set) | |
| ret = smu->ppt_funcs->gfx_state_change_set(smu, state); | |
| return ret; | |
| } | |
| int smu_handle_passthrough_sbr(struct smu_context *smu, bool enable) | |
| { | |
| int ret = 0; | |
| if (smu->ppt_funcs->smu_handle_passthrough_sbr) | |
| ret = smu->ppt_funcs->smu_handle_passthrough_sbr(smu, enable); | |
| return ret; | |
| } | |
| int smu_get_ecc_info(struct smu_context *smu, void *umc_ecc) | |
| { | |
| int ret = -EOPNOTSUPP; | |
| if (smu->ppt_funcs && | |
| smu->ppt_funcs->get_ecc_info) | |
| ret = smu->ppt_funcs->get_ecc_info(smu, umc_ecc); | |
| return ret; | |
| } | |
| static int smu_get_prv_buffer_details(void *handle, void **addr, size_t *size) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_table *memory_pool = &smu_table->memory_pool; | |
| if (!addr || !size) | |
| return -EINVAL; | |
| *addr = NULL; | |
| *size = 0; | |
| if (memory_pool->bo) { | |
| *addr = memory_pool->cpu_addr; | |
| *size = memory_pool->size; | |
| } | |
| return 0; | |
| } | |
| static void smu_print_dpm_policy(struct smu_dpm_policy *policy, char *sysbuf, | |
| size_t *size) | |
| { | |
| size_t offset = *size; | |
| int level; | |
| for_each_set_bit(level, &policy->level_mask, PP_POLICY_MAX_LEVELS) { | |
| if (level == policy->current_level) | |
| offset += sysfs_emit_at(sysbuf, offset, | |
| "%d : %s*\n", level, | |
| policy->desc->get_desc(policy, level)); | |
| else | |
| offset += sysfs_emit_at(sysbuf, offset, | |
| "%d : %s\n", level, | |
| policy->desc->get_desc(policy, level)); | |
| } | |
| *size = offset; | |
| } | |
| ssize_t smu_get_pm_policy_info(struct smu_context *smu, | |
| enum pp_pm_policy p_type, char *sysbuf) | |
| { | |
| struct smu_dpm_context *dpm_ctxt = &smu->smu_dpm; | |
| struct smu_dpm_policy_ctxt *policy_ctxt; | |
| struct smu_dpm_policy *dpm_policy; | |
| size_t offset = 0; | |
| policy_ctxt = dpm_ctxt->dpm_policies; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled || !policy_ctxt || | |
| !policy_ctxt->policy_mask) | |
| return -EOPNOTSUPP; | |
| if (p_type == PP_PM_POLICY_NONE) | |
| return -EINVAL; | |
| dpm_policy = smu_get_pm_policy(smu, p_type); | |
| if (!dpm_policy || !dpm_policy->level_mask || !dpm_policy->desc) | |
| return -ENOENT; | |
| if (!sysbuf) | |
| return -EINVAL; | |
| smu_print_dpm_policy(dpm_policy, sysbuf, &offset); | |
| return offset; | |
| } | |
| struct smu_dpm_policy *smu_get_pm_policy(struct smu_context *smu, | |
| enum pp_pm_policy p_type) | |
| { | |
| struct smu_dpm_context *dpm_ctxt = &smu->smu_dpm; | |
| struct smu_dpm_policy_ctxt *policy_ctxt; | |
| int i; | |
| policy_ctxt = dpm_ctxt->dpm_policies; | |
| if (!policy_ctxt) | |
| return NULL; | |
| for (i = 0; i < hweight32(policy_ctxt->policy_mask); ++i) { | |
| if (policy_ctxt->policies[i].policy_type == p_type) | |
| return &policy_ctxt->policies[i]; | |
| } | |
| return NULL; | |
| } | |
| int smu_set_pm_policy(struct smu_context *smu, enum pp_pm_policy p_type, | |
| int level) | |
| { | |
| struct smu_dpm_context *dpm_ctxt = &smu->smu_dpm; | |
| struct smu_dpm_policy *dpm_policy = NULL; | |
| struct smu_dpm_policy_ctxt *policy_ctxt; | |
| int ret = -EOPNOTSUPP; | |
| policy_ctxt = dpm_ctxt->dpm_policies; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled || !policy_ctxt || | |
| !policy_ctxt->policy_mask) | |
| return ret; | |
| if (level < 0 || level >= PP_POLICY_MAX_LEVELS) | |
| return -EINVAL; | |
| dpm_policy = smu_get_pm_policy(smu, p_type); | |
| if (!dpm_policy || !dpm_policy->level_mask || !dpm_policy->set_policy) | |
| return ret; | |
| if (dpm_policy->current_level == level) | |
| return 0; | |
| ret = dpm_policy->set_policy(smu, level); | |
| if (!ret) | |
| dpm_policy->current_level = level; | |
| return ret; | |
| } | |
| static ssize_t smu_sys_get_temp_metrics(void *handle, enum smu_temp_metric_type type, void *table) | |
| { | |
| struct smu_context *smu = handle; | |
| struct smu_table_context *smu_table = &smu->smu_table; | |
| struct smu_driver_table *driver_tables = smu_table->driver_tables; | |
| enum smu_driver_table_id table_id; | |
| struct smu_driver_table *temp_table; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->smu_temp.temp_funcs || !smu->smu_temp.temp_funcs->get_temp_metrics) | |
| return -EOPNOTSUPP; | |
| table_id = smu_metrics_get_temp_table_id(type); | |
| if (table_id == SMU_DRIVER_TABLE_COUNT) | |
| return -EINVAL; | |
| temp_table = &driver_tables[table_id]; | |
| /* If the request is to get size alone, return the cached table size */ | |
| if (!table && temp_table->cache.size) | |
| return temp_table->cache.size; | |
| if (smu_driver_table_is_valid(temp_table)) { | |
| memcpy(table, temp_table->cache.buffer, temp_table->cache.size); | |
| return temp_table->cache.size; | |
| } | |
| return smu->smu_temp.temp_funcs->get_temp_metrics(smu, type, table); | |
| } | |
| static bool smu_temp_metrics_is_supported(void *handle, enum smu_temp_metric_type type) | |
| { | |
| struct smu_context *smu = handle; | |
| bool ret = false; | |
| if (!smu->pm_enabled) | |
| return false; | |
| if (smu->smu_temp.temp_funcs && smu->smu_temp.temp_funcs->temp_metrics_is_supported) | |
| ret = smu->smu_temp.temp_funcs->temp_metrics_is_supported(smu, type); | |
| return ret; | |
| } | |
| static u64 smu_get_npm_cap(void *handle) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->ppt_funcs || !smu->ppt_funcs->get_npm_cap) | |
| return 0; | |
| return smu->ppt_funcs->get_npm_cap(smu); | |
| } | |
| static int smu_set_npm_limit(void *handle, uint32_t limit) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->ppt_funcs || !smu->ppt_funcs->set_npm_limit) | |
| return -EOPNOTSUPP; | |
| return smu->ppt_funcs->set_npm_limit(smu, limit); | |
| } | |
| static ssize_t smu_sys_get_xcp_metrics(void *handle, int xcp_id, void *table) | |
| { | |
| struct smu_context *smu = handle; | |
| if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled) | |
| return -EOPNOTSUPP; | |
| if (!smu->adev->xcp_mgr || !smu->ppt_funcs->get_xcp_metrics) | |
| return -EOPNOTSUPP; | |
| return smu->ppt_funcs->get_xcp_metrics(smu, xcp_id, table); | |
| } | |
| static const struct amd_pm_funcs swsmu_pm_funcs = { | |
| /* export for sysfs */ | |
| .set_fan_control_mode = smu_set_fan_control_mode, | |
| .get_fan_control_mode = smu_get_fan_control_mode, | |
| .set_fan_speed_pwm = smu_set_fan_speed_pwm, | |
| .get_fan_speed_pwm = smu_get_fan_speed_pwm, | |
| .force_clock_level = smu_force_ppclk_levels, | |
| .emit_clock_levels = smu_emit_ppclk_levels, | |
| .force_performance_level = smu_force_performance_level, | |
| .reapply_performance_level = smu_reapply_performance_level, | |
| .read_sensor = smu_read_sensor, | |
| .get_apu_thermal_limit = smu_get_apu_thermal_limit, | |
| .set_apu_thermal_limit = smu_set_apu_thermal_limit, | |
| .get_performance_level = smu_get_performance_level, | |
| .get_current_power_state = smu_get_current_power_state, | |
| .get_fan_speed_rpm = smu_get_fan_speed_rpm, | |
| .set_fan_speed_rpm = smu_set_fan_speed_rpm, | |
| .get_pp_num_states = smu_get_power_num_states, | |
| .get_pp_table = smu_sys_get_pp_table, | |
| .set_pp_table = smu_sys_set_pp_table, | |
| .switch_power_profile = smu_switch_power_profile, | |
| .pause_power_profile = smu_pause_power_profile, | |
| .notify_ac_dc = smu_notify_ac_dc, | |
| /* export to amdgpu */ | |
| .dispatch_tasks = smu_handle_dpm_task, | |
| .load_firmware = smu_load_microcode, | |
| .set_powergating_by_smu = smu_dpm_set_power_gate, | |
| .set_power_limit = smu_set_ppt_limit, | |
| .get_power_limit = smu_get_ppt_limit, | |
| .get_power_profile_mode = smu_get_power_profile_mode, | |
| .set_power_profile_mode = smu_set_power_profile_mode, | |
| .odn_edit_dpm_table = smu_od_edit_dpm_table, | |
| .set_mp1_state = smu_set_mp1_state, | |
| .gfx_state_change_set = smu_gfx_state_change_set, | |
| /* export to DC */ | |
| .get_sclk = smu_get_sclk, | |
| .get_mclk = smu_get_mclk, | |
| .display_configuration_change = smu_display_configuration_change, | |
| .get_clock_by_type_with_latency = smu_get_clock_by_type_with_latency, | |
| .display_clock_voltage_request = smu_display_clock_voltage_request, | |
| .enable_mgpu_fan_boost = smu_enable_mgpu_fan_boost, | |
| .set_active_display_count = smu_set_display_count, | |
| .set_min_deep_sleep_dcefclk = smu_set_deep_sleep_dcefclk, | |
| .get_asic_baco_capability = smu_get_baco_capability, | |
| .set_asic_baco_state = smu_baco_set_state, | |
| .get_ppfeature_status = smu_sys_get_pp_feature_mask, | |
| .set_ppfeature_status = smu_sys_set_pp_feature_mask, | |
| .asic_reset_mode_2 = smu_mode2_reset, | |
| .asic_reset_enable_gfx_features = smu_enable_gfx_features, | |
| .set_df_cstate = smu_set_df_cstate, | |
| .set_xgmi_pstate = smu_set_xgmi_pstate, | |
| .get_gpu_metrics = smu_sys_get_gpu_metrics, | |
| .get_pm_metrics = smu_sys_get_pm_metrics, | |
| .set_watermarks_for_clock_ranges = smu_set_watermarks_for_clock_ranges, | |
| .display_disable_memory_clock_switch = smu_display_disable_memory_clock_switch, | |
| .get_max_sustainable_clocks_by_dc = smu_get_max_sustainable_clocks_by_dc, | |
| .get_uclk_dpm_states = smu_get_uclk_dpm_states, | |
| .get_dpm_clock_table = smu_get_dpm_clock_table, | |
| .get_smu_prv_buf_details = smu_get_prv_buffer_details, | |
| .get_xcp_metrics = smu_sys_get_xcp_metrics, | |
| .get_temp_metrics = smu_sys_get_temp_metrics, | |
| .temp_metrics_is_supported = smu_temp_metrics_is_supported, | |
| .set_npm_limit = smu_set_npm_limit, | |
| .get_npm_cap = smu_get_npm_cap, | |
| }; | |
| int smu_wait_for_event(struct smu_context *smu, enum smu_event_type event, | |
| uint64_t event_arg) | |
| { | |
| int ret = -EINVAL; | |
| if (smu->ppt_funcs->wait_for_event) | |
| ret = smu->ppt_funcs->wait_for_event(smu, event, event_arg); | |
| return ret; | |
| } | |
| int smu_stb_collect_info(struct smu_context *smu, void *buf, uint32_t size) | |
| { | |
| if (!smu->ppt_funcs->stb_collect_info || !smu->stb_context.enabled) | |
| return -EOPNOTSUPP; | |
| /* Confirm the buffer allocated is of correct size */ | |
| if (size != smu->stb_context.stb_buf_size) | |
| return -EINVAL; | |
| /* | |
| * No need to lock smu mutex as we access STB directly through MMIO | |
| * and not going through SMU messaging route (for now at least). | |
| * For registers access rely on implementation internal locking. | |
| */ | |
| return smu->ppt_funcs->stb_collect_info(smu, buf, size); | |
| } | |
| #if defined(CONFIG_DEBUG_FS) | |
| static int smu_stb_debugfs_open(struct inode *inode, struct file *filp) | |
| { | |
| struct amdgpu_device *adev = filp->f_inode->i_private; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| unsigned char *buf; | |
| int r; | |
| buf = kvmalloc_array(smu->stb_context.stb_buf_size, sizeof(*buf), GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| r = smu_stb_collect_info(smu, buf, smu->stb_context.stb_buf_size); | |
| if (r) | |
| goto out; | |
| filp->private_data = buf; | |
| return 0; | |
| out: | |
| kvfree(buf); | |
| return r; | |
| } | |
| static ssize_t smu_stb_debugfs_read(struct file *filp, char __user *buf, size_t size, | |
| loff_t *pos) | |
| { | |
| struct amdgpu_device *adev = filp->f_inode->i_private; | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| if (!filp->private_data) | |
| return -EINVAL; | |
| return simple_read_from_buffer(buf, | |
| size, | |
| pos, filp->private_data, | |
| smu->stb_context.stb_buf_size); | |
| } | |
| static int smu_stb_debugfs_release(struct inode *inode, struct file *filp) | |
| { | |
| kvfree(filp->private_data); | |
| filp->private_data = NULL; | |
| return 0; | |
| } | |
| /* | |
| * We have to define not only read method but also | |
| * open and release because .read takes up to PAGE_SIZE | |
| * data each time so and so is invoked multiple times. | |
| * We allocate the STB buffer in .open and release it | |
| * in .release | |
| */ | |
| static const struct file_operations smu_stb_debugfs_fops = { | |
| .owner = THIS_MODULE, | |
| .open = smu_stb_debugfs_open, | |
| .read = smu_stb_debugfs_read, | |
| .release = smu_stb_debugfs_release, | |
| .llseek = default_llseek, | |
| }; | |
| #endif | |
| void amdgpu_smu_stb_debug_fs_init(struct amdgpu_device *adev) | |
| { | |
| #if defined(CONFIG_DEBUG_FS) | |
| struct smu_context *smu = adev->powerplay.pp_handle; | |
| if (!smu || (!smu->stb_context.stb_buf_size)) | |
| return; | |
| debugfs_create_file_size("amdgpu_smu_stb_dump", | |
| S_IRUSR, | |
| adev_to_drm(adev)->primary->debugfs_root, | |
| adev, | |
| &smu_stb_debugfs_fops, | |
| smu->stb_context.stb_buf_size); | |
| #endif | |
| } | |
| int smu_send_hbm_bad_pages_num(struct smu_context *smu, uint32_t size) | |
| { | |
| int ret = 0; | |
| if (smu->ppt_funcs && smu->ppt_funcs->send_hbm_bad_pages_num) | |
| ret = smu->ppt_funcs->send_hbm_bad_pages_num(smu, size); | |
| return ret; | |
| } | |
| int smu_send_hbm_bad_channel_flag(struct smu_context *smu, uint32_t size) | |
| { | |
| int ret = 0; | |
| if (smu->ppt_funcs && smu->ppt_funcs->send_hbm_bad_channel_flag) | |
| ret = smu->ppt_funcs->send_hbm_bad_channel_flag(smu, size); | |
| return ret; | |
| } | |
| int smu_send_rma_reason(struct smu_context *smu) | |
| { | |
| int ret = 0; | |
| if (smu->ppt_funcs && smu->ppt_funcs->send_rma_reason) | |
| ret = smu->ppt_funcs->send_rma_reason(smu); | |
| return ret; | |
| } | |
| /** | |
| * smu_reset_sdma_is_supported - Check if SDMA reset is supported by SMU | |
| * @smu: smu_context pointer | |
| * | |
| * This function checks if the SMU supports resetting the SDMA engine. | |
| * It returns true if supported, false otherwise. | |
| */ | |
| bool smu_reset_sdma_is_supported(struct smu_context *smu) | |
| { | |
| return smu_feature_cap_test(smu, SMU_FEATURE_CAP_ID__SDMA_RESET); | |
| } | |
| int smu_reset_sdma(struct smu_context *smu, uint32_t inst_mask) | |
| { | |
| int ret = 0; | |
| if (smu->ppt_funcs && smu->ppt_funcs->reset_sdma) | |
| ret = smu->ppt_funcs->reset_sdma(smu, inst_mask); | |
| return ret; | |
| } | |
| bool smu_reset_vcn_is_supported(struct smu_context *smu) | |
| { | |
| return smu_feature_cap_test(smu, SMU_FEATURE_CAP_ID__VCN_RESET); | |
| } | |
| int smu_reset_vcn(struct smu_context *smu, uint32_t inst_mask) | |
| { | |
| if (smu->ppt_funcs && smu->ppt_funcs->dpm_reset_vcn) | |
| smu->ppt_funcs->dpm_reset_vcn(smu, inst_mask); | |
| return 0; | |
| } |