| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ltc2485.c - Driver for Linear Technology LTC2485 ADC |
| * |
| * Copyright (C) 2016 Alison Schofield <amsfield22@gmail.com> |
| * |
| * Datasheet: http://cds.linear.com/docs/en/datasheet/2485fd.pdf |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| |
| /* Power-on configuration: rejects both 50/60Hz, operates at 1x speed */ |
| #define LTC2485_CONFIG_DEFAULT 0 |
| |
| struct ltc2485_data { |
| struct i2c_client *client; |
| ktime_t time_prev; /* last conversion */ |
| }; |
| |
| static void ltc2485_wait_conv(struct ltc2485_data *data) |
| { |
| const unsigned int conv_time = 147; /* conversion time ms */ |
| unsigned int time_elapsed; |
| |
| /* delay if conversion time not passed since last read or write */ |
| time_elapsed = ktime_ms_delta(ktime_get(), data->time_prev); |
| |
| if (time_elapsed < conv_time) |
| msleep(conv_time - time_elapsed); |
| } |
| |
| static int ltc2485_read(struct ltc2485_data *data, int *val) |
| { |
| struct i2c_client *client = data->client; |
| __be32 buf = 0; |
| int ret; |
| |
| ltc2485_wait_conv(data); |
| |
| ret = i2c_master_recv(client, (char *)&buf, 4); |
| if (ret < 0) { |
| dev_err(&client->dev, "i2c_master_recv failed\n"); |
| return ret; |
| } |
| data->time_prev = ktime_get(); |
| *val = sign_extend32(be32_to_cpu(buf) >> 6, 24); |
| |
| return ret; |
| } |
| |
| static int ltc2485_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct ltc2485_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| if (mask == IIO_CHAN_INFO_RAW) { |
| ret = ltc2485_read(data, val); |
| if (ret < 0) |
| return ret; |
| |
| return IIO_VAL_INT; |
| |
| } else if (mask == IIO_CHAN_INFO_SCALE) { |
| *val = 5000; /* on board vref millivolts */ |
| *val2 = 25; /* 25 (24 + sign) data bits */ |
| return IIO_VAL_FRACTIONAL_LOG2; |
| |
| } else { |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_chan_spec ltc2485_channel[] = { |
| { |
| .type = IIO_VOLTAGE, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
| }, |
| }; |
| |
| static const struct iio_info ltc2485_info = { |
| .read_raw = ltc2485_read_raw, |
| }; |
| |
| static int ltc2485_probe(struct i2c_client *client) |
| { |
| const struct i2c_device_id *id = i2c_client_get_device_id(client); |
| struct iio_dev *indio_dev; |
| struct ltc2485_data *data; |
| int ret; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | |
| I2C_FUNC_SMBUS_WRITE_BYTE)) |
| return -EOPNOTSUPP; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| data->client = client; |
| |
| indio_dev->name = id->name; |
| indio_dev->info = <c2485_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = ltc2485_channel; |
| indio_dev->num_channels = ARRAY_SIZE(ltc2485_channel); |
| |
| ret = i2c_smbus_write_byte(data->client, LTC2485_CONFIG_DEFAULT); |
| if (ret < 0) |
| return ret; |
| |
| data->time_prev = ktime_get(); |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static const struct i2c_device_id ltc2485_id[] = { |
| { "ltc2485" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ltc2485_id); |
| |
| static struct i2c_driver ltc2485_driver = { |
| .driver = { |
| .name = "ltc2485", |
| }, |
| .probe = ltc2485_probe, |
| .id_table = ltc2485_id, |
| }; |
| module_i2c_driver(ltc2485_driver); |
| |
| MODULE_AUTHOR("Alison Schofield <amsfield22@gmail.com>"); |
| MODULE_DESCRIPTION("Linear Technology LTC2485 ADC driver"); |
| MODULE_LICENSE("GPL v2"); |