| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Multiplexer subsystem |
| * |
| * Copyright (C) 2017 Axentia Technologies AB |
| * |
| * Author: Peter Rosin <peda@axentia.se> |
| */ |
| |
| #define pr_fmt(fmt) "mux-core: " fmt |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/export.h> |
| #include <linux/idr.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/mux/consumer.h> |
| #include <linux/mux/driver.h> |
| #include <linux/of.h> |
| #include <linux/slab.h> |
| |
| /* |
| * The idle-as-is "state" is not an actual state that may be selected, it |
| * only implies that the state should not be changed. So, use that state |
| * as indication that the cached state of the multiplexer is unknown. |
| */ |
| #define MUX_CACHE_UNKNOWN MUX_IDLE_AS_IS |
| |
| /** |
| * struct mux_state - Represents a mux controller state specific to a given |
| * consumer. |
| * @mux: Pointer to a mux controller. |
| * @state: State of the mux to be selected. |
| * |
| * This structure is specific to the consumer that acquires it and has |
| * information specific to that consumer. |
| */ |
| struct mux_state { |
| struct mux_control *mux; |
| unsigned int state; |
| }; |
| |
| static struct class mux_class = { |
| .name = "mux", |
| }; |
| |
| static DEFINE_IDA(mux_ida); |
| |
| static int __init mux_init(void) |
| { |
| ida_init(&mux_ida); |
| return class_register(&mux_class); |
| } |
| |
| static void __exit mux_exit(void) |
| { |
| class_unregister(&mux_class); |
| ida_destroy(&mux_ida); |
| } |
| |
| static void mux_chip_release(struct device *dev) |
| { |
| struct mux_chip *mux_chip = to_mux_chip(dev); |
| |
| ida_free(&mux_ida, mux_chip->id); |
| kfree(mux_chip); |
| } |
| |
| static const struct device_type mux_type = { |
| .name = "mux-chip", |
| .release = mux_chip_release, |
| }; |
| |
| /** |
| * mux_chip_alloc() - Allocate a mux-chip. |
| * @dev: The parent device implementing the mux interface. |
| * @controllers: The number of mux controllers to allocate for this chip. |
| * @sizeof_priv: Size of extra memory area for private use by the caller. |
| * |
| * After allocating the mux-chip with the desired number of mux controllers |
| * but before registering the chip, the mux driver is required to configure |
| * the number of valid mux states in the mux_chip->mux[N].states members and |
| * the desired idle state in the returned mux_chip->mux[N].idle_state members. |
| * The default idle state is MUX_IDLE_AS_IS. The mux driver also needs to |
| * provide a pointer to the operations struct in the mux_chip->ops member |
| * before registering the mux-chip with mux_chip_register. |
| * |
| * Return: A pointer to the new mux-chip, or an ERR_PTR with a negative errno. |
| */ |
| struct mux_chip *mux_chip_alloc(struct device *dev, |
| unsigned int controllers, size_t sizeof_priv) |
| { |
| struct mux_chip *mux_chip; |
| int i; |
| |
| if (WARN_ON(!dev || !controllers)) |
| return ERR_PTR(-EINVAL); |
| |
| mux_chip = kzalloc(sizeof(*mux_chip) + |
| controllers * sizeof(*mux_chip->mux) + |
| sizeof_priv, GFP_KERNEL); |
| if (!mux_chip) |
| return ERR_PTR(-ENOMEM); |
| |
| mux_chip->mux = (struct mux_control *)(mux_chip + 1); |
| mux_chip->dev.class = &mux_class; |
| mux_chip->dev.type = &mux_type; |
| mux_chip->dev.parent = dev; |
| mux_chip->dev.of_node = dev->of_node; |
| dev_set_drvdata(&mux_chip->dev, mux_chip); |
| |
| mux_chip->id = ida_alloc(&mux_ida, GFP_KERNEL); |
| if (mux_chip->id < 0) { |
| int err = mux_chip->id; |
| |
| pr_err("muxchipX failed to get a device id\n"); |
| kfree(mux_chip); |
| return ERR_PTR(err); |
| } |
| dev_set_name(&mux_chip->dev, "muxchip%d", mux_chip->id); |
| |
| mux_chip->controllers = controllers; |
| for (i = 0; i < controllers; ++i) { |
| struct mux_control *mux = &mux_chip->mux[i]; |
| |
| mux->chip = mux_chip; |
| sema_init(&mux->lock, 1); |
| mux->cached_state = MUX_CACHE_UNKNOWN; |
| mux->idle_state = MUX_IDLE_AS_IS; |
| mux->last_change = ktime_get(); |
| } |
| |
| device_initialize(&mux_chip->dev); |
| |
| return mux_chip; |
| } |
| EXPORT_SYMBOL_GPL(mux_chip_alloc); |
| |
| static int mux_control_set(struct mux_control *mux, int state) |
| { |
| int ret = mux->chip->ops->set(mux, state); |
| |
| mux->cached_state = ret < 0 ? MUX_CACHE_UNKNOWN : state; |
| if (ret >= 0) |
| mux->last_change = ktime_get(); |
| |
| return ret; |
| } |
| |
| /** |
| * mux_chip_register() - Register a mux-chip, thus readying the controllers |
| * for use. |
| * @mux_chip: The mux-chip to register. |
| * |
| * Do not retry registration of the same mux-chip on failure. You should |
| * instead put it away with mux_chip_free() and allocate a new one, if you |
| * for some reason would like to retry registration. |
| * |
| * Return: Zero on success or a negative errno on error. |
| */ |
| int mux_chip_register(struct mux_chip *mux_chip) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < mux_chip->controllers; ++i) { |
| struct mux_control *mux = &mux_chip->mux[i]; |
| |
| if (mux->idle_state == mux->cached_state) |
| continue; |
| |
| ret = mux_control_set(mux, mux->idle_state); |
| if (ret < 0) { |
| dev_err(&mux_chip->dev, "unable to set idle state\n"); |
| return ret; |
| } |
| } |
| |
| ret = device_add(&mux_chip->dev); |
| if (ret < 0) |
| dev_err(&mux_chip->dev, |
| "device_add failed in %s: %d\n", __func__, ret); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(mux_chip_register); |
| |
| /** |
| * mux_chip_unregister() - Take the mux-chip off-line. |
| * @mux_chip: The mux-chip to unregister. |
| * |
| * mux_chip_unregister() reverses the effects of mux_chip_register(). |
| * But not completely, you should not try to call mux_chip_register() |
| * on a mux-chip that has been registered before. |
| */ |
| void mux_chip_unregister(struct mux_chip *mux_chip) |
| { |
| device_del(&mux_chip->dev); |
| } |
| EXPORT_SYMBOL_GPL(mux_chip_unregister); |
| |
| /** |
| * mux_chip_free() - Free the mux-chip for good. |
| * @mux_chip: The mux-chip to free. |
| * |
| * mux_chip_free() reverses the effects of mux_chip_alloc(). |
| */ |
| void mux_chip_free(struct mux_chip *mux_chip) |
| { |
| if (!mux_chip) |
| return; |
| |
| put_device(&mux_chip->dev); |
| } |
| EXPORT_SYMBOL_GPL(mux_chip_free); |
| |
| static void devm_mux_chip_release(struct device *dev, void *res) |
| { |
| struct mux_chip *mux_chip = *(struct mux_chip **)res; |
| |
| mux_chip_free(mux_chip); |
| } |
| |
| /** |
| * devm_mux_chip_alloc() - Resource-managed version of mux_chip_alloc(). |
| * @dev: The parent device implementing the mux interface. |
| * @controllers: The number of mux controllers to allocate for this chip. |
| * @sizeof_priv: Size of extra memory area for private use by the caller. |
| * |
| * See mux_chip_alloc() for more details. |
| * |
| * Return: A pointer to the new mux-chip, or an ERR_PTR with a negative errno. |
| */ |
| struct mux_chip *devm_mux_chip_alloc(struct device *dev, |
| unsigned int controllers, |
| size_t sizeof_priv) |
| { |
| struct mux_chip **ptr, *mux_chip; |
| |
| ptr = devres_alloc(devm_mux_chip_release, sizeof(*ptr), GFP_KERNEL); |
| if (!ptr) |
| return ERR_PTR(-ENOMEM); |
| |
| mux_chip = mux_chip_alloc(dev, controllers, sizeof_priv); |
| if (IS_ERR(mux_chip)) { |
| devres_free(ptr); |
| return mux_chip; |
| } |
| |
| *ptr = mux_chip; |
| devres_add(dev, ptr); |
| |
| return mux_chip; |
| } |
| EXPORT_SYMBOL_GPL(devm_mux_chip_alloc); |
| |
| static void devm_mux_chip_reg_release(struct device *dev, void *res) |
| { |
| struct mux_chip *mux_chip = *(struct mux_chip **)res; |
| |
| mux_chip_unregister(mux_chip); |
| } |
| |
| /** |
| * devm_mux_chip_register() - Resource-managed version mux_chip_register(). |
| * @dev: The parent device implementing the mux interface. |
| * @mux_chip: The mux-chip to register. |
| * |
| * See mux_chip_register() for more details. |
| * |
| * Return: Zero on success or a negative errno on error. |
| */ |
| int devm_mux_chip_register(struct device *dev, |
| struct mux_chip *mux_chip) |
| { |
| struct mux_chip **ptr; |
| int res; |
| |
| ptr = devres_alloc(devm_mux_chip_reg_release, sizeof(*ptr), GFP_KERNEL); |
| if (!ptr) |
| return -ENOMEM; |
| |
| res = mux_chip_register(mux_chip); |
| if (res) { |
| devres_free(ptr); |
| return res; |
| } |
| |
| *ptr = mux_chip; |
| devres_add(dev, ptr); |
| |
| return res; |
| } |
| EXPORT_SYMBOL_GPL(devm_mux_chip_register); |
| |
| /** |
| * mux_control_states() - Query the number of multiplexer states. |
| * @mux: The mux-control to query. |
| * |
| * Return: The number of multiplexer states. |
| */ |
| unsigned int mux_control_states(struct mux_control *mux) |
| { |
| return mux->states; |
| } |
| EXPORT_SYMBOL_GPL(mux_control_states); |
| |
| /* |
| * The mux->lock must be down when calling this function. |
| */ |
| static int __mux_control_select(struct mux_control *mux, int state) |
| { |
| int ret; |
| |
| if (WARN_ON(state < 0 || state >= mux->states)) |
| return -EINVAL; |
| |
| if (mux->cached_state == state) |
| return 0; |
| |
| ret = mux_control_set(mux, state); |
| if (ret >= 0) |
| return 0; |
| |
| /* The mux update failed, try to revert if appropriate... */ |
| if (mux->idle_state != MUX_IDLE_AS_IS) |
| mux_control_set(mux, mux->idle_state); |
| |
| return ret; |
| } |
| |
| static void mux_control_delay(struct mux_control *mux, unsigned int delay_us) |
| { |
| ktime_t delayend; |
| s64 remaining; |
| |
| if (!delay_us) |
| return; |
| |
| delayend = ktime_add_us(mux->last_change, delay_us); |
| remaining = ktime_us_delta(delayend, ktime_get()); |
| if (remaining > 0) |
| fsleep(remaining); |
| } |
| |
| /** |
| * mux_control_select_delay() - Select the given multiplexer state. |
| * @mux: The mux-control to request a change of state from. |
| * @state: The new requested state. |
| * @delay_us: The time to delay (in microseconds) if the mux state is changed. |
| * |
| * On successfully selecting the mux-control state, it will be locked until |
| * there is a call to mux_control_deselect(). If the mux-control is already |
| * selected when mux_control_select() is called, the caller will be blocked |
| * until mux_control_deselect() or mux_state_deselect() is called (by someone |
| * else). |
| * |
| * Therefore, make sure to call mux_control_deselect() when the operation is |
| * complete and the mux-control is free for others to use, but do not call |
| * mux_control_deselect() if mux_control_select() fails. |
| * |
| * Return: 0 when the mux-control state has the requested state or a negative |
| * errno on error. |
| */ |
| int mux_control_select_delay(struct mux_control *mux, unsigned int state, |
| unsigned int delay_us) |
| { |
| int ret; |
| |
| ret = down_killable(&mux->lock); |
| if (ret < 0) |
| return ret; |
| |
| ret = __mux_control_select(mux, state); |
| if (ret >= 0) |
| mux_control_delay(mux, delay_us); |
| |
| if (ret < 0) |
| up(&mux->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(mux_control_select_delay); |
| |
| /** |
| * mux_state_select_delay() - Select the given multiplexer state. |
| * @mstate: The mux-state to select. |
| * @delay_us: The time to delay (in microseconds) if the mux state is changed. |
| * |
| * On successfully selecting the mux-state, its mux-control will be locked |
| * until there is a call to mux_state_deselect(). If the mux-control is already |
| * selected when mux_state_select() is called, the caller will be blocked |
| * until mux_state_deselect() or mux_control_deselect() is called (by someone |
| * else). |
| * |
| * Therefore, make sure to call mux_state_deselect() when the operation is |
| * complete and the mux-control is free for others to use, but do not call |
| * mux_state_deselect() if mux_state_select() fails. |
| * |
| * Return: 0 when the mux-state has been selected or a negative |
| * errno on error. |
| */ |
| int mux_state_select_delay(struct mux_state *mstate, unsigned int delay_us) |
| { |
| return mux_control_select_delay(mstate->mux, mstate->state, delay_us); |
| } |
| EXPORT_SYMBOL_GPL(mux_state_select_delay); |
| |
| /** |
| * mux_control_try_select_delay() - Try to select the given multiplexer state. |
| * @mux: The mux-control to request a change of state from. |
| * @state: The new requested state. |
| * @delay_us: The time to delay (in microseconds) if the mux state is changed. |
| * |
| * On successfully selecting the mux-control state, it will be locked until |
| * mux_control_deselect() is called. |
| * |
| * Therefore, make sure to call mux_control_deselect() when the operation is |
| * complete and the mux-control is free for others to use, but do not call |
| * mux_control_deselect() if mux_control_try_select() fails. |
| * |
| * Return: 0 when the mux-control state has the requested state or a negative |
| * errno on error. Specifically -EBUSY if the mux-control is contended. |
| */ |
| int mux_control_try_select_delay(struct mux_control *mux, unsigned int state, |
| unsigned int delay_us) |
| { |
| int ret; |
| |
| if (down_trylock(&mux->lock)) |
| return -EBUSY; |
| |
| ret = __mux_control_select(mux, state); |
| if (ret >= 0) |
| mux_control_delay(mux, delay_us); |
| |
| if (ret < 0) |
| up(&mux->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(mux_control_try_select_delay); |
| |
| /** |
| * mux_state_try_select_delay() - Try to select the given multiplexer state. |
| * @mstate: The mux-state to select. |
| * @delay_us: The time to delay (in microseconds) if the mux state is changed. |
| * |
| * On successfully selecting the mux-state, its mux-control will be locked |
| * until mux_state_deselect() is called. |
| * |
| * Therefore, make sure to call mux_state_deselect() when the operation is |
| * complete and the mux-control is free for others to use, but do not call |
| * mux_state_deselect() if mux_state_try_select() fails. |
| * |
| * Return: 0 when the mux-state has been selected or a negative errno on |
| * error. Specifically -EBUSY if the mux-control is contended. |
| */ |
| int mux_state_try_select_delay(struct mux_state *mstate, unsigned int delay_us) |
| { |
| return mux_control_try_select_delay(mstate->mux, mstate->state, delay_us); |
| } |
| EXPORT_SYMBOL_GPL(mux_state_try_select_delay); |
| |
| /** |
| * mux_control_deselect() - Deselect the previously selected multiplexer state. |
| * @mux: The mux-control to deselect. |
| * |
| * It is required that a single call is made to mux_control_deselect() for |
| * each and every successful call made to either of mux_control_select() or |
| * mux_control_try_select(). |
| * |
| * Return: 0 on success and a negative errno on error. An error can only |
| * occur if the mux has an idle state. Note that even if an error occurs, the |
| * mux-control is unlocked and is thus free for the next access. |
| */ |
| int mux_control_deselect(struct mux_control *mux) |
| { |
| int ret = 0; |
| |
| if (mux->idle_state != MUX_IDLE_AS_IS && |
| mux->idle_state != mux->cached_state) |
| ret = mux_control_set(mux, mux->idle_state); |
| |
| up(&mux->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(mux_control_deselect); |
| |
| /** |
| * mux_state_deselect() - Deselect the previously selected multiplexer state. |
| * @mstate: The mux-state to deselect. |
| * |
| * It is required that a single call is made to mux_state_deselect() for |
| * each and every successful call made to either of mux_state_select() or |
| * mux_state_try_select(). |
| * |
| * Return: 0 on success and a negative errno on error. An error can only |
| * occur if the mux has an idle state. Note that even if an error occurs, the |
| * mux-control is unlocked and is thus free for the next access. |
| */ |
| int mux_state_deselect(struct mux_state *mstate) |
| { |
| return mux_control_deselect(mstate->mux); |
| } |
| EXPORT_SYMBOL_GPL(mux_state_deselect); |
| |
| /* Note this function returns a reference to the mux_chip dev. */ |
| static struct mux_chip *of_find_mux_chip_by_node(struct device_node *np) |
| { |
| struct device *dev; |
| |
| dev = class_find_device_by_of_node(&mux_class, np); |
| |
| return dev ? to_mux_chip(dev) : NULL; |
| } |
| |
| /* |
| * mux_get() - Get the mux-control for a device. |
| * @dev: The device that needs a mux-control. |
| * @mux_name: The name identifying the mux-control. |
| * @state: Pointer to where the requested state is returned, or NULL when |
| * the required multiplexer states are handled by other means. |
| * |
| * Return: A pointer to the mux-control, or an ERR_PTR with a negative errno. |
| */ |
| static struct mux_control *mux_get(struct device *dev, const char *mux_name, |
| unsigned int *state) |
| { |
| struct device_node *np = dev->of_node; |
| struct of_phandle_args args; |
| struct mux_chip *mux_chip; |
| unsigned int controller; |
| int index = 0; |
| int ret; |
| |
| if (mux_name) { |
| if (state) |
| index = of_property_match_string(np, "mux-state-names", |
| mux_name); |
| else |
| index = of_property_match_string(np, "mux-control-names", |
| mux_name); |
| if (index < 0) { |
| dev_err(dev, "mux controller '%s' not found\n", |
| mux_name); |
| return ERR_PTR(index); |
| } |
| } |
| |
| if (state) |
| ret = of_parse_phandle_with_args(np, |
| "mux-states", "#mux-state-cells", |
| index, &args); |
| else |
| ret = of_parse_phandle_with_args(np, |
| "mux-controls", "#mux-control-cells", |
| index, &args); |
| if (ret) { |
| dev_err(dev, "%pOF: failed to get mux-%s %s(%i)\n", |
| np, state ? "state" : "control", mux_name ?: "", index); |
| return ERR_PTR(ret); |
| } |
| |
| mux_chip = of_find_mux_chip_by_node(args.np); |
| of_node_put(args.np); |
| if (!mux_chip) |
| return ERR_PTR(-EPROBE_DEFER); |
| |
| controller = 0; |
| if (state) { |
| if (args.args_count > 2 || args.args_count == 0 || |
| (args.args_count < 2 && mux_chip->controllers > 1)) { |
| dev_err(dev, "%pOF: wrong #mux-state-cells for %pOF\n", |
| np, args.np); |
| put_device(&mux_chip->dev); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (args.args_count == 2) { |
| controller = args.args[0]; |
| *state = args.args[1]; |
| } else { |
| *state = args.args[0]; |
| } |
| |
| } else { |
| if (args.args_count > 1 || |
| (!args.args_count && mux_chip->controllers > 1)) { |
| dev_err(dev, "%pOF: wrong #mux-control-cells for %pOF\n", |
| np, args.np); |
| put_device(&mux_chip->dev); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (args.args_count) |
| controller = args.args[0]; |
| } |
| |
| if (controller >= mux_chip->controllers) { |
| dev_err(dev, "%pOF: bad mux controller %u specified in %pOF\n", |
| np, controller, args.np); |
| put_device(&mux_chip->dev); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| return &mux_chip->mux[controller]; |
| } |
| |
| /** |
| * mux_control_get() - Get the mux-control for a device. |
| * @dev: The device that needs a mux-control. |
| * @mux_name: The name identifying the mux-control. |
| * |
| * Return: A pointer to the mux-control, or an ERR_PTR with a negative errno. |
| */ |
| struct mux_control *mux_control_get(struct device *dev, const char *mux_name) |
| { |
| return mux_get(dev, mux_name, NULL); |
| } |
| EXPORT_SYMBOL_GPL(mux_control_get); |
| |
| /** |
| * mux_control_put() - Put away the mux-control for good. |
| * @mux: The mux-control to put away. |
| * |
| * mux_control_put() reverses the effects of mux_control_get(). |
| */ |
| void mux_control_put(struct mux_control *mux) |
| { |
| put_device(&mux->chip->dev); |
| } |
| EXPORT_SYMBOL_GPL(mux_control_put); |
| |
| static void devm_mux_control_release(struct device *dev, void *res) |
| { |
| struct mux_control *mux = *(struct mux_control **)res; |
| |
| mux_control_put(mux); |
| } |
| |
| /** |
| * devm_mux_control_get() - Get the mux-control for a device, with resource |
| * management. |
| * @dev: The device that needs a mux-control. |
| * @mux_name: The name identifying the mux-control. |
| * |
| * Return: Pointer to the mux-control, or an ERR_PTR with a negative errno. |
| */ |
| struct mux_control *devm_mux_control_get(struct device *dev, |
| const char *mux_name) |
| { |
| struct mux_control **ptr, *mux; |
| |
| ptr = devres_alloc(devm_mux_control_release, sizeof(*ptr), GFP_KERNEL); |
| if (!ptr) |
| return ERR_PTR(-ENOMEM); |
| |
| mux = mux_control_get(dev, mux_name); |
| if (IS_ERR(mux)) { |
| devres_free(ptr); |
| return mux; |
| } |
| |
| *ptr = mux; |
| devres_add(dev, ptr); |
| |
| return mux; |
| } |
| EXPORT_SYMBOL_GPL(devm_mux_control_get); |
| |
| /* |
| * mux_state_get() - Get the mux-state for a device. |
| * @dev: The device that needs a mux-state. |
| * @mux_name: The name identifying the mux-state. |
| * |
| * Return: A pointer to the mux-state, or an ERR_PTR with a negative errno. |
| */ |
| static struct mux_state *mux_state_get(struct device *dev, const char *mux_name) |
| { |
| struct mux_state *mstate; |
| |
| mstate = kzalloc(sizeof(*mstate), GFP_KERNEL); |
| if (!mstate) |
| return ERR_PTR(-ENOMEM); |
| |
| mstate->mux = mux_get(dev, mux_name, &mstate->state); |
| if (IS_ERR(mstate->mux)) { |
| int err = PTR_ERR(mstate->mux); |
| |
| kfree(mstate); |
| return ERR_PTR(err); |
| } |
| |
| return mstate; |
| } |
| |
| /* |
| * mux_state_put() - Put away the mux-state for good. |
| * @mstate: The mux-state to put away. |
| * |
| * mux_state_put() reverses the effects of mux_state_get(). |
| */ |
| static void mux_state_put(struct mux_state *mstate) |
| { |
| mux_control_put(mstate->mux); |
| kfree(mstate); |
| } |
| |
| static void devm_mux_state_release(struct device *dev, void *res) |
| { |
| struct mux_state *mstate = *(struct mux_state **)res; |
| |
| mux_state_put(mstate); |
| } |
| |
| /** |
| * devm_mux_state_get() - Get the mux-state for a device, with resource |
| * management. |
| * @dev: The device that needs a mux-control. |
| * @mux_name: The name identifying the mux-control. |
| * |
| * Return: Pointer to the mux-state, or an ERR_PTR with a negative errno. |
| */ |
| struct mux_state *devm_mux_state_get(struct device *dev, |
| const char *mux_name) |
| { |
| struct mux_state **ptr, *mstate; |
| |
| ptr = devres_alloc(devm_mux_state_release, sizeof(*ptr), GFP_KERNEL); |
| if (!ptr) |
| return ERR_PTR(-ENOMEM); |
| |
| mstate = mux_state_get(dev, mux_name); |
| if (IS_ERR(mstate)) { |
| devres_free(ptr); |
| return mstate; |
| } |
| |
| *ptr = mstate; |
| devres_add(dev, ptr); |
| |
| return mstate; |
| } |
| EXPORT_SYMBOL_GPL(devm_mux_state_get); |
| |
| /* |
| * Using subsys_initcall instead of module_init here to try to ensure - for |
| * the non-modular case - that the subsystem is initialized when mux consumers |
| * and mux controllers start to use it. |
| * For the modular case, the ordering is ensured with module dependencies. |
| */ |
| subsys_initcall(mux_init); |
| module_exit(mux_exit); |
| |
| MODULE_DESCRIPTION("Multiplexer subsystem"); |
| MODULE_AUTHOR("Peter Rosin <peda@axentia.se>"); |
| MODULE_LICENSE("GPL v2"); |