| // SPDX-License-Identifier: BSD-3-Clause-Clear | |
| /* Copyright (C) 2020 MediaTek Inc. */ | |
| #include <linux/relay.h> | |
| #include "mt7915.h" | |
| #include "eeprom.h" | |
| #include "mcu.h" | |
| #include "mac.h" | |
| #define FW_BIN_LOG_MAGIC 0x44e98caf | |
| /** global debugfs **/ | |
| struct hw_queue_map { | |
| const char *name; | |
| u8 index; | |
| u8 pid; | |
| u8 qid; | |
| }; | |
| static int | |
| mt7915_implicit_txbf_set(void *data, u64 val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| /* The existing connected stations shall reconnect to apply | |
| * new implicit txbf configuration. | |
| */ | |
| dev->ibf = !!val; | |
| return mt7915_mcu_set_txbf(dev, MT_BF_TYPE_UPDATE); | |
| } | |
| static int | |
| mt7915_implicit_txbf_get(void *data, u64 *val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| *val = dev->ibf; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_implicit_txbf, mt7915_implicit_txbf_get, | |
| mt7915_implicit_txbf_set, "%lld\n"); | |
| /* test knob of system error recovery */ | |
| static ssize_t | |
| mt7915_sys_recovery_set(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mt7915_phy *phy = file->private_data; | |
| struct mt7915_dev *dev = phy->dev; | |
| bool band = phy->mt76->band_idx; | |
| int ret = 0; | |
| u16 val; | |
| ret = kstrtou16_from_user(user_buf, count, 0, &val); | |
| if (ret) | |
| return ret; | |
| switch (val) { | |
| /* | |
| * 0: grab firmware current SER state. | |
| * 1: trigger & enable system error L1 recovery. | |
| * 2: trigger & enable system error L2 recovery. | |
| * 3: trigger & enable system error L3 rx abort. | |
| * 4: trigger & enable system error L3 tx abort | |
| * 5: trigger & enable system error L3 tx disable. | |
| * 6: trigger & enable system error L3 bf recovery. | |
| * 7: trigger & enable system error full recovery. | |
| * 8: trigger firmware crash. | |
| */ | |
| case SER_QUERY: | |
| ret = mt7915_mcu_set_ser(dev, 0, 0, band); | |
| break; | |
| case SER_SET_RECOVER_L1: | |
| case SER_SET_RECOVER_L2: | |
| case SER_SET_RECOVER_L3_RX_ABORT: | |
| case SER_SET_RECOVER_L3_TX_ABORT: | |
| case SER_SET_RECOVER_L3_TX_DISABLE: | |
| case SER_SET_RECOVER_L3_BF: | |
| ret = mt7915_mcu_set_ser(dev, SER_ENABLE, BIT(val), band); | |
| if (ret) | |
| return ret; | |
| ret = mt7915_mcu_set_ser(dev, SER_RECOVER, val, band); | |
| break; | |
| /* enable full chip reset */ | |
| case SER_SET_RECOVER_FULL: | |
| mt76_set(dev, MT_WFDMA0_MCU_HOST_INT_ENA, MT_MCU_CMD_WDT_MASK); | |
| ret = mt7915_mcu_set_ser(dev, 1, 3, band); | |
| if (ret) | |
| return ret; | |
| dev->recovery.state |= MT_MCU_CMD_WDT_MASK; | |
| mt7915_reset(dev); | |
| break; | |
| /* WARNING: trigger firmware crash */ | |
| case SER_SET_SYSTEM_ASSERT: | |
| mt76_wr(dev, MT_MCU_WM_CIRQ_EINT_MASK_CLR_ADDR, BIT(18)); | |
| mt76_wr(dev, MT_MCU_WM_CIRQ_EINT_SOFT_ADDR, BIT(18)); | |
| break; | |
| default: | |
| break; | |
| } | |
| return ret ? ret : count; | |
| } | |
| static ssize_t | |
| mt7915_sys_recovery_get(struct file *file, char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mt7915_phy *phy = file->private_data; | |
| struct mt7915_dev *dev = phy->dev; | |
| char *buff; | |
| int desc = 0; | |
| ssize_t ret; | |
| static const size_t bufsz = 1024; | |
| buff = kmalloc(bufsz, GFP_KERNEL); | |
| if (!buff) | |
| return -ENOMEM; | |
| /* HELP */ | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "Please echo the correct value ...\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "0: grab firmware transient SER state\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "1: trigger system error L1 recovery\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "2: trigger system error L2 recovery\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "3: trigger system error L3 rx abort\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "4: trigger system error L3 tx abort\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "5: trigger system error L3 tx disable\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "6: trigger system error L3 bf recovery\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "7: trigger system error full recovery\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "8: trigger firmware crash\n"); | |
| /* SER statistics */ | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "\nlet's dump firmware SER statistics...\n"); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_STATUS = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_SER_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_PLE_ERR = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_PLE_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_PLE_ERR_1 = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_PLE1_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_PLE_ERR_AMSDU = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_PLE_AMSDU_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_PSE_ERR = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_PSE_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_PSE_ERR_1 = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_PSE1_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_LMAC_WISR6_B0 = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_LAMC_WISR6_BN0_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_LMAC_WISR6_B1 = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_LAMC_WISR6_BN1_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_LMAC_WISR7_B0 = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_LAMC_WISR7_BN0_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "::E R , SER_LMAC_WISR7_B1 = 0x%08x\n", | |
| mt76_rr(dev, MT_SWDEF_LAMC_WISR7_BN1_STATS)); | |
| desc += scnprintf(buff + desc, bufsz - desc, | |
| "\nSYS_RESET_COUNT: WM %d, WA %d\n", | |
| dev->recovery.wm_reset_count, | |
| dev->recovery.wa_reset_count); | |
| ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); | |
| kfree(buff); | |
| return ret; | |
| } | |
| static const struct file_operations mt7915_sys_recovery_ops = { | |
| .write = mt7915_sys_recovery_set, | |
| .read = mt7915_sys_recovery_get, | |
| .open = simple_open, | |
| .llseek = default_llseek, | |
| }; | |
| static int | |
| mt7915_radar_trigger(void *data, u64 val) | |
| { | |
| #define RADAR_MAIN_CHAIN 1 | |
| #define RADAR_BACKGROUND 2 | |
| struct mt7915_phy *phy = data; | |
| struct mt7915_dev *dev = phy->dev; | |
| int rdd_idx; | |
| if (!val || val > RADAR_BACKGROUND) | |
| return -EINVAL; | |
| if (val == RADAR_BACKGROUND && !dev->rdd2_phy) { | |
| dev_err(dev->mt76.dev, "Background radar is not enabled\n"); | |
| return -EINVAL; | |
| } | |
| rdd_idx = mt7915_get_rdd_idx(phy, val == RADAR_BACKGROUND); | |
| if (rdd_idx < 0) { | |
| dev_err(dev->mt76.dev, "No RDD found\n"); | |
| return -EINVAL; | |
| } | |
| return mt76_connac_mcu_rdd_cmd(&dev->mt76, RDD_RADAR_EMULATE, | |
| rdd_idx, 0, 0); | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_radar_trigger, NULL, | |
| mt7915_radar_trigger, "%lld\n"); | |
| static int | |
| mt7915_muru_debug_set(void *data, u64 val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| dev->muru_debug = val; | |
| mt7915_mcu_muru_debug_set(dev, dev->muru_debug); | |
| return 0; | |
| } | |
| static int | |
| mt7915_muru_debug_get(void *data, u64 *val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| *val = dev->muru_debug; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_muru_debug, mt7915_muru_debug_get, | |
| mt7915_muru_debug_set, "%lld\n"); | |
| static int mt7915_muru_stats_show(struct seq_file *file, void *data) | |
| { | |
| struct mt7915_phy *phy = file->private; | |
| struct mt7915_dev *dev = phy->dev; | |
| static const char * const dl_non_he_type[] = { | |
| "CCK", "OFDM", "HT MIX", "HT GF", | |
| "VHT SU", "VHT 2MU", "VHT 3MU", "VHT 4MU" | |
| }; | |
| static const char * const dl_he_type[] = { | |
| "HE SU", "HE EXT", "HE 2MU", "HE 3MU", "HE 4MU", | |
| "HE 2RU", "HE 3RU", "HE 4RU", "HE 5-8RU", "HE 9-16RU", | |
| "HE >16RU" | |
| }; | |
| static const char * const ul_he_type[] = { | |
| "HE 2MU", "HE 3MU", "HE 4MU", "HE SU", "HE 2RU", | |
| "HE 3RU", "HE 4RU", "HE 5-8RU", "HE 9-16RU", "HE >16RU" | |
| }; | |
| int ret, i; | |
| u64 total_ppdu_cnt, sub_total_cnt; | |
| if (!dev->muru_debug) { | |
| seq_puts(file, "Please enable muru_debug first.\n"); | |
| return 0; | |
| } | |
| mutex_lock(&dev->mt76.mutex); | |
| ret = mt7915_mcu_muru_debug_get(phy); | |
| if (ret) | |
| goto exit; | |
| /* Non-HE Downlink*/ | |
| seq_puts(file, "[Non-HE]\nDownlink\nData Type: "); | |
| for (i = 0; i < 5; i++) | |
| seq_printf(file, "%8s | ", dl_non_he_type[i]); | |
| seq_puts(file, "\nTotal Count:"); | |
| seq_printf(file, "%8u | %8u | %8u | %8u | %8u | ", | |
| phy->mib.dl_cck_cnt, | |
| phy->mib.dl_ofdm_cnt, | |
| phy->mib.dl_htmix_cnt, | |
| phy->mib.dl_htgf_cnt, | |
| phy->mib.dl_vht_su_cnt); | |
| seq_puts(file, "\nDownlink MU-MIMO\nData Type: "); | |
| for (i = 5; i < 8; i++) | |
| seq_printf(file, "%8s | ", dl_non_he_type[i]); | |
| seq_puts(file, "\nTotal Count:"); | |
| seq_printf(file, "%8u | %8u | %8u | ", | |
| phy->mib.dl_vht_2mu_cnt, | |
| phy->mib.dl_vht_3mu_cnt, | |
| phy->mib.dl_vht_4mu_cnt); | |
| sub_total_cnt = (u64)phy->mib.dl_vht_2mu_cnt + | |
| phy->mib.dl_vht_3mu_cnt + | |
| phy->mib.dl_vht_4mu_cnt; | |
| seq_printf(file, "\nTotal non-HE MU-MIMO DL PPDU count: %lld", | |
| sub_total_cnt); | |
| total_ppdu_cnt = sub_total_cnt + | |
| phy->mib.dl_cck_cnt + | |
| phy->mib.dl_ofdm_cnt + | |
| phy->mib.dl_htmix_cnt + | |
| phy->mib.dl_htgf_cnt + | |
| phy->mib.dl_vht_su_cnt; | |
| seq_printf(file, "\nAll non-HE DL PPDU count: %lld", total_ppdu_cnt); | |
| /* HE Downlink */ | |
| seq_puts(file, "\n\n[HE]\nDownlink\nData Type: "); | |
| for (i = 0; i < 2; i++) | |
| seq_printf(file, "%8s | ", dl_he_type[i]); | |
| seq_puts(file, "\nTotal Count:"); | |
| seq_printf(file, "%8u | %8u | ", | |
| phy->mib.dl_he_su_cnt, phy->mib.dl_he_ext_su_cnt); | |
| seq_puts(file, "\nDownlink MU-MIMO\nData Type: "); | |
| for (i = 2; i < 5; i++) | |
| seq_printf(file, "%8s | ", dl_he_type[i]); | |
| seq_puts(file, "\nTotal Count:"); | |
| seq_printf(file, "%8u | %8u | %8u | ", | |
| phy->mib.dl_he_2mu_cnt, phy->mib.dl_he_3mu_cnt, | |
| phy->mib.dl_he_4mu_cnt); | |
| seq_puts(file, "\nDownlink OFDMA\nData Type: "); | |
| for (i = 5; i < 11; i++) | |
| seq_printf(file, "%8s | ", dl_he_type[i]); | |
| seq_puts(file, "\nTotal Count:"); | |
| seq_printf(file, "%8u | %8u | %8u | %8u | %9u | %8u | ", | |
| phy->mib.dl_he_2ru_cnt, | |
| phy->mib.dl_he_3ru_cnt, | |
| phy->mib.dl_he_4ru_cnt, | |
| phy->mib.dl_he_5to8ru_cnt, | |
| phy->mib.dl_he_9to16ru_cnt, | |
| phy->mib.dl_he_gtr16ru_cnt); | |
| sub_total_cnt = (u64)phy->mib.dl_he_2mu_cnt + | |
| phy->mib.dl_he_3mu_cnt + | |
| phy->mib.dl_he_4mu_cnt; | |
| total_ppdu_cnt = sub_total_cnt; | |
| seq_printf(file, "\nTotal HE MU-MIMO DL PPDU count: %lld", | |
| sub_total_cnt); | |
| sub_total_cnt = (u64)phy->mib.dl_he_2ru_cnt + | |
| phy->mib.dl_he_3ru_cnt + | |
| phy->mib.dl_he_4ru_cnt + | |
| phy->mib.dl_he_5to8ru_cnt + | |
| phy->mib.dl_he_9to16ru_cnt + | |
| phy->mib.dl_he_gtr16ru_cnt; | |
| total_ppdu_cnt += sub_total_cnt; | |
| seq_printf(file, "\nTotal HE OFDMA DL PPDU count: %lld", | |
| sub_total_cnt); | |
| total_ppdu_cnt += (u64)phy->mib.dl_he_su_cnt + | |
| phy->mib.dl_he_ext_su_cnt; | |
| seq_printf(file, "\nAll HE DL PPDU count: %lld", total_ppdu_cnt); | |
| /* HE Uplink */ | |
| seq_puts(file, "\n\nUplink"); | |
| seq_puts(file, "\nTrigger-based Uplink MU-MIMO\nData Type: "); | |
| for (i = 0; i < 3; i++) | |
| seq_printf(file, "%8s | ", ul_he_type[i]); | |
| seq_puts(file, "\nTotal Count:"); | |
| seq_printf(file, "%8u | %8u | %8u | ", | |
| phy->mib.ul_hetrig_2mu_cnt, | |
| phy->mib.ul_hetrig_3mu_cnt, | |
| phy->mib.ul_hetrig_4mu_cnt); | |
| seq_puts(file, "\nTrigger-based Uplink OFDMA\nData Type: "); | |
| for (i = 3; i < 10; i++) | |
| seq_printf(file, "%8s | ", ul_he_type[i]); | |
| seq_puts(file, "\nTotal Count:"); | |
| seq_printf(file, "%8u | %8u | %8u | %8u | %8u | %9u | %7u | ", | |
| phy->mib.ul_hetrig_su_cnt, | |
| phy->mib.ul_hetrig_2ru_cnt, | |
| phy->mib.ul_hetrig_3ru_cnt, | |
| phy->mib.ul_hetrig_4ru_cnt, | |
| phy->mib.ul_hetrig_5to8ru_cnt, | |
| phy->mib.ul_hetrig_9to16ru_cnt, | |
| phy->mib.ul_hetrig_gtr16ru_cnt); | |
| sub_total_cnt = (u64)phy->mib.ul_hetrig_2mu_cnt + | |
| phy->mib.ul_hetrig_3mu_cnt + | |
| phy->mib.ul_hetrig_4mu_cnt; | |
| total_ppdu_cnt = sub_total_cnt; | |
| seq_printf(file, "\nTotal HE MU-MIMO UL TB PPDU count: %lld", | |
| sub_total_cnt); | |
| sub_total_cnt = (u64)phy->mib.ul_hetrig_2ru_cnt + | |
| phy->mib.ul_hetrig_3ru_cnt + | |
| phy->mib.ul_hetrig_4ru_cnt + | |
| phy->mib.ul_hetrig_5to8ru_cnt + | |
| phy->mib.ul_hetrig_9to16ru_cnt + | |
| phy->mib.ul_hetrig_gtr16ru_cnt; | |
| total_ppdu_cnt += sub_total_cnt; | |
| seq_printf(file, "\nTotal HE OFDMA UL TB PPDU count: %lld", | |
| sub_total_cnt); | |
| total_ppdu_cnt += phy->mib.ul_hetrig_su_cnt; | |
| seq_printf(file, "\nAll HE UL TB PPDU count: %lld\n", total_ppdu_cnt); | |
| exit: | |
| mutex_unlock(&dev->mt76.mutex); | |
| return ret; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(mt7915_muru_stats); | |
| static int | |
| mt7915_rdd_monitor(struct seq_file *s, void *data) | |
| { | |
| struct mt7915_dev *dev = dev_get_drvdata(s->private); | |
| struct cfg80211_chan_def *chandef = &dev->rdd2_chandef; | |
| const char *bw; | |
| int ret = 0; | |
| mutex_lock(&dev->mt76.mutex); | |
| if (!mt7915_eeprom_has_background_radar(dev)) { | |
| seq_puts(s, "no background radar capability\n"); | |
| goto out; | |
| } | |
| if (!cfg80211_chandef_valid(chandef)) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (!dev->rdd2_phy) { | |
| seq_puts(s, "not running\n"); | |
| goto out; | |
| } | |
| switch (chandef->width) { | |
| case NL80211_CHAN_WIDTH_40: | |
| bw = "40"; | |
| break; | |
| case NL80211_CHAN_WIDTH_80: | |
| bw = "80"; | |
| break; | |
| case NL80211_CHAN_WIDTH_160: | |
| bw = "160"; | |
| break; | |
| case NL80211_CHAN_WIDTH_80P80: | |
| bw = "80P80"; | |
| break; | |
| default: | |
| bw = "20"; | |
| break; | |
| } | |
| seq_printf(s, "channel %d (%d MHz) width %s MHz center1: %d MHz\n", | |
| chandef->chan->hw_value, chandef->chan->center_freq, | |
| bw, chandef->center_freq1); | |
| out: | |
| mutex_unlock(&dev->mt76.mutex); | |
| return ret; | |
| } | |
| static int | |
| mt7915_fw_debug_wm_set(void *data, u64 val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| enum { | |
| DEBUG_TXCMD = 62, | |
| DEBUG_CMD_RPT_TX, | |
| DEBUG_CMD_RPT_TRIG, | |
| DEBUG_SPL, | |
| DEBUG_RPT_RX, | |
| } debug; | |
| bool tx, rx, en; | |
| int ret; | |
| dev->fw.debug_wm = val ? MCU_FW_LOG_TO_HOST : 0; | |
| if (dev->fw.debug_bin) | |
| val = 16; | |
| else | |
| val = dev->fw.debug_wm; | |
| tx = dev->fw.debug_wm || (dev->fw.debug_bin & BIT(1)); | |
| rx = dev->fw.debug_wm || (dev->fw.debug_bin & BIT(2)); | |
| en = dev->fw.debug_wm || (dev->fw.debug_bin & BIT(0)); | |
| ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WM, val); | |
| if (ret) | |
| goto out; | |
| for (debug = DEBUG_TXCMD; debug <= DEBUG_RPT_RX; debug++) { | |
| if (debug == DEBUG_RPT_RX) | |
| val = en && rx; | |
| else | |
| val = en && tx; | |
| ret = mt7915_mcu_fw_dbg_ctrl(dev, debug, val); | |
| if (ret) | |
| goto out; | |
| } | |
| /* WM CPU info record control */ | |
| mt76_clear(dev, MT_CPU_UTIL_CTRL, BIT(0)); | |
| mt76_wr(dev, MT_DIC_CMD_REG_CMD, BIT(2) | BIT(13) | | |
| (dev->fw.debug_wm ? 0 : BIT(0))); | |
| mt76_wr(dev, MT_MCU_WM_CIRQ_IRQ_MASK_CLR_ADDR, BIT(5)); | |
| mt76_wr(dev, MT_MCU_WM_CIRQ_IRQ_SOFT_ADDR, BIT(5)); | |
| out: | |
| if (ret) | |
| dev->fw.debug_wm = 0; | |
| return ret; | |
| } | |
| static int | |
| mt7915_fw_debug_wm_get(void *data, u64 *val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| *val = dev->fw.debug_wm; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_fw_debug_wm, mt7915_fw_debug_wm_get, | |
| mt7915_fw_debug_wm_set, "%lld\n"); | |
| static int | |
| mt7915_fw_debug_wa_set(void *data, u64 val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| int ret; | |
| dev->fw.debug_wa = val ? MCU_FW_LOG_TO_HOST : 0; | |
| ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WA, dev->fw.debug_wa); | |
| if (ret) | |
| goto out; | |
| ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET), | |
| MCU_WA_PARAM_PDMA_RX, !!dev->fw.debug_wa, 0); | |
| out: | |
| if (ret) | |
| dev->fw.debug_wa = 0; | |
| return ret; | |
| } | |
| static int | |
| mt7915_fw_debug_wa_get(void *data, u64 *val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| *val = dev->fw.debug_wa; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_fw_debug_wa, mt7915_fw_debug_wa_get, | |
| mt7915_fw_debug_wa_set, "%lld\n"); | |
| static struct dentry * | |
| create_buf_file_cb(const char *filename, struct dentry *parent, umode_t mode, | |
| struct rchan_buf *buf, int *is_global) | |
| { | |
| struct dentry *f; | |
| f = debugfs_create_file("fwlog_data", mode, parent, buf, | |
| &relay_file_operations); | |
| if (IS_ERR(f)) | |
| return NULL; | |
| *is_global = 1; | |
| return f; | |
| } | |
| static int | |
| remove_buf_file_cb(struct dentry *f) | |
| { | |
| debugfs_remove(f); | |
| return 0; | |
| } | |
| static int | |
| mt7915_fw_debug_bin_set(void *data, u64 val) | |
| { | |
| static struct rchan_callbacks relay_cb = { | |
| .create_buf_file = create_buf_file_cb, | |
| .remove_buf_file = remove_buf_file_cb, | |
| }; | |
| struct mt7915_dev *dev = data; | |
| if (!dev->relay_fwlog) | |
| dev->relay_fwlog = relay_open("fwlog_data", dev->debugfs_dir, | |
| 1500, 512, &relay_cb, NULL); | |
| if (!dev->relay_fwlog) | |
| return -ENOMEM; | |
| dev->fw.debug_bin = val; | |
| relay_reset(dev->relay_fwlog); | |
| return mt7915_fw_debug_wm_set(dev, dev->fw.debug_wm); | |
| } | |
| static int | |
| mt7915_fw_debug_bin_get(void *data, u64 *val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| *val = dev->fw.debug_bin; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_fw_debug_bin, mt7915_fw_debug_bin_get, | |
| mt7915_fw_debug_bin_set, "%lld\n"); | |
| static int | |
| mt7915_fw_util_wm_show(struct seq_file *file, void *data) | |
| { | |
| struct mt7915_dev *dev = file->private; | |
| seq_printf(file, "Program counter: 0x%x\n", mt76_rr(dev, MT_WM_MCU_PC)); | |
| if (dev->fw.debug_wm) { | |
| seq_printf(file, "Busy: %u%% Peak busy: %u%%\n", | |
| mt76_rr(dev, MT_CPU_UTIL_BUSY_PCT), | |
| mt76_rr(dev, MT_CPU_UTIL_PEAK_BUSY_PCT)); | |
| seq_printf(file, "Idle count: %u Peak idle count: %u\n", | |
| mt76_rr(dev, MT_CPU_UTIL_IDLE_CNT), | |
| mt76_rr(dev, MT_CPU_UTIL_PEAK_IDLE_CNT)); | |
| } | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(mt7915_fw_util_wm); | |
| static int | |
| mt7915_fw_util_wa_show(struct seq_file *file, void *data) | |
| { | |
| struct mt7915_dev *dev = file->private; | |
| seq_printf(file, "Program counter: 0x%x\n", mt76_rr(dev, MT_WA_MCU_PC)); | |
| if (dev->fw.debug_wa) | |
| return mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(QUERY), | |
| MCU_WA_PARAM_CPU_UTIL, 0, 0); | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(mt7915_fw_util_wa); | |
| static void | |
| mt7915_ampdu_stat_read_phy(struct mt7915_phy *phy, | |
| struct seq_file *file) | |
| { | |
| struct mt7915_dev *dev = phy->dev; | |
| bool ext_phy = phy != &dev->phy; | |
| int bound[15], range[4], i; | |
| u8 band = phy->mt76->band_idx; | |
| /* Tx ampdu stat */ | |
| for (i = 0; i < ARRAY_SIZE(range); i++) | |
| range[i] = mt76_rr(dev, MT_MIB_ARNG(band, i)); | |
| for (i = 0; i < ARRAY_SIZE(bound); i++) | |
| bound[i] = MT_MIB_ARNCR_RANGE(range[i / 4], i % 4) + 1; | |
| seq_printf(file, "\nPhy %d, Phy band %d\n", ext_phy, band); | |
| seq_printf(file, "Length: %8d | ", bound[0]); | |
| for (i = 0; i < ARRAY_SIZE(bound) - 1; i++) | |
| seq_printf(file, "%3d -%3d | ", | |
| bound[i] + 1, bound[i + 1]); | |
| seq_puts(file, "\nCount: "); | |
| for (i = 0; i < ARRAY_SIZE(bound); i++) | |
| seq_printf(file, "%8d | ", phy->mt76->aggr_stats[i]); | |
| seq_puts(file, "\n"); | |
| seq_printf(file, "BA miss count: %d\n", phy->mib.ba_miss_cnt); | |
| } | |
| static void | |
| mt7915_txbf_stat_read_phy(struct mt7915_phy *phy, struct seq_file *s) | |
| { | |
| struct mt76_mib_stats *mib = &phy->mib; | |
| static const char * const bw[] = { | |
| "BW20", "BW40", "BW80", "BW160" | |
| }; | |
| /* Tx Beamformer monitor */ | |
| seq_puts(s, "\nTx Beamformer applied PPDU counts: "); | |
| seq_printf(s, "iBF: %d, eBF: %d\n", | |
| mib->tx_bf_ibf_ppdu_cnt, | |
| mib->tx_bf_ebf_ppdu_cnt); | |
| /* Tx Beamformer Rx feedback monitor */ | |
| seq_puts(s, "Tx Beamformer Rx feedback statistics: "); | |
| seq_printf(s, "All: %d, HE: %d, VHT: %d, HT: %d, ", | |
| mib->tx_bf_rx_fb_all_cnt, | |
| mib->tx_bf_rx_fb_he_cnt, | |
| mib->tx_bf_rx_fb_vht_cnt, | |
| mib->tx_bf_rx_fb_ht_cnt); | |
| seq_printf(s, "%s, NC: %d, NR: %d\n", | |
| bw[mib->tx_bf_rx_fb_bw], | |
| mib->tx_bf_rx_fb_nc_cnt, | |
| mib->tx_bf_rx_fb_nr_cnt); | |
| /* Tx Beamformee Rx NDPA & Tx feedback report */ | |
| seq_printf(s, "Tx Beamformee successful feedback frames: %d\n", | |
| mib->tx_bf_fb_cpl_cnt); | |
| seq_printf(s, "Tx Beamformee feedback triggered counts: %d\n", | |
| mib->tx_bf_fb_trig_cnt); | |
| /* Tx SU & MU counters */ | |
| seq_printf(s, "Tx multi-user Beamforming counts: %d\n", | |
| mib->tx_bf_cnt); | |
| seq_printf(s, "Tx multi-user MPDU counts: %d\n", mib->tx_mu_mpdu_cnt); | |
| seq_printf(s, "Tx multi-user successful MPDU counts: %d\n", | |
| mib->tx_mu_acked_mpdu_cnt); | |
| seq_printf(s, "Tx single-user successful MPDU counts: %d\n", | |
| mib->tx_su_acked_mpdu_cnt); | |
| seq_puts(s, "\n"); | |
| } | |
| static int | |
| mt7915_tx_stats_show(struct seq_file *file, void *data) | |
| { | |
| struct mt7915_phy *phy = file->private; | |
| struct mt7915_dev *dev = phy->dev; | |
| struct mt76_mib_stats *mib = &phy->mib; | |
| int i; | |
| mutex_lock(&dev->mt76.mutex); | |
| mt7915_ampdu_stat_read_phy(phy, file); | |
| mt7915_mac_update_stats(phy); | |
| mt7915_txbf_stat_read_phy(phy, file); | |
| /* Tx amsdu info */ | |
| seq_puts(file, "Tx MSDU statistics:\n"); | |
| for (i = 0; i < ARRAY_SIZE(mib->tx_amsdu); i++) { | |
| seq_printf(file, "AMSDU pack count of %d MSDU in TXD: %8d ", | |
| i + 1, mib->tx_amsdu[i]); | |
| if (mib->tx_amsdu_cnt) | |
| seq_printf(file, "(%3d%%)\n", | |
| mib->tx_amsdu[i] * 100 / mib->tx_amsdu_cnt); | |
| else | |
| seq_puts(file, "\n"); | |
| } | |
| mutex_unlock(&dev->mt76.mutex); | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(mt7915_tx_stats); | |
| static void | |
| mt7915_hw_queue_read(struct seq_file *s, u32 size, | |
| const struct hw_queue_map *map) | |
| { | |
| struct mt7915_phy *phy = s->private; | |
| struct mt7915_dev *dev = phy->dev; | |
| u32 i, val; | |
| val = mt76_rr(dev, MT_FL_Q_EMPTY); | |
| for (i = 0; i < size; i++) { | |
| u32 ctrl, head, tail, queued; | |
| if (val & BIT(map[i].index)) | |
| continue; | |
| ctrl = BIT(31) | (map[i].pid << 10) | ((u32)map[i].qid << 24); | |
| mt76_wr(dev, MT_FL_Q0_CTRL, ctrl); | |
| head = mt76_get_field(dev, MT_FL_Q2_CTRL, | |
| GENMASK(11, 0)); | |
| tail = mt76_get_field(dev, MT_FL_Q2_CTRL, | |
| GENMASK(27, 16)); | |
| queued = mt76_get_field(dev, MT_FL_Q3_CTRL, | |
| GENMASK(11, 0)); | |
| seq_printf(s, "\t%s: ", map[i].name); | |
| seq_printf(s, "queued:0x%03x head:0x%03x tail:0x%03x\n", | |
| queued, head, tail); | |
| } | |
| } | |
| static void | |
| mt7915_sta_hw_queue_read(void *data, struct ieee80211_sta *sta) | |
| { | |
| struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv; | |
| struct mt7915_dev *dev = msta->vif->phy->dev; | |
| struct seq_file *s = data; | |
| u8 ac; | |
| for (ac = 0; ac < 4; ac++) { | |
| u32 qlen, ctrl, val; | |
| u32 idx = msta->wcid.idx >> 5; | |
| u8 offs = msta->wcid.idx & GENMASK(4, 0); | |
| ctrl = BIT(31) | BIT(11) | (ac << 24); | |
| val = mt76_rr(dev, MT_PLE_AC_QEMPTY(ac, idx)); | |
| if (val & BIT(offs)) | |
| continue; | |
| mt76_wr(dev, MT_FL_Q0_CTRL, ctrl | msta->wcid.idx); | |
| qlen = mt76_get_field(dev, MT_FL_Q3_CTRL, | |
| GENMASK(11, 0)); | |
| seq_printf(s, "\tSTA %pM wcid %d: AC%d%d queued:%d\n", | |
| sta->addr, msta->wcid.idx, | |
| msta->vif->mt76.wmm_idx, ac, qlen); | |
| } | |
| } | |
| static int | |
| mt7915_hw_queues_show(struct seq_file *file, void *data) | |
| { | |
| struct mt7915_phy *phy = file->private; | |
| struct mt7915_dev *dev = phy->dev; | |
| static const struct hw_queue_map ple_queue_map[] = { | |
| { "CPU_Q0", 0, 1, MT_CTX0 }, | |
| { "CPU_Q1", 1, 1, MT_CTX0 + 1 }, | |
| { "CPU_Q2", 2, 1, MT_CTX0 + 2 }, | |
| { "CPU_Q3", 3, 1, MT_CTX0 + 3 }, | |
| { "ALTX_Q0", 8, 2, MT_LMAC_ALTX0 }, | |
| { "BMC_Q0", 9, 2, MT_LMAC_BMC0 }, | |
| { "BCN_Q0", 10, 2, MT_LMAC_BCN0 }, | |
| { "PSMP_Q0", 11, 2, MT_LMAC_PSMP0 }, | |
| { "ALTX_Q1", 12, 2, MT_LMAC_ALTX0 + 4 }, | |
| { "BMC_Q1", 13, 2, MT_LMAC_BMC0 + 4 }, | |
| { "BCN_Q1", 14, 2, MT_LMAC_BCN0 + 4 }, | |
| { "PSMP_Q1", 15, 2, MT_LMAC_PSMP0 + 4 }, | |
| }; | |
| static const struct hw_queue_map pse_queue_map[] = { | |
| { "CPU Q0", 0, 1, MT_CTX0 }, | |
| { "CPU Q1", 1, 1, MT_CTX0 + 1 }, | |
| { "CPU Q2", 2, 1, MT_CTX0 + 2 }, | |
| { "CPU Q3", 3, 1, MT_CTX0 + 3 }, | |
| { "HIF_Q0", 8, 0, MT_HIF0 }, | |
| { "HIF_Q1", 9, 0, MT_HIF0 + 1 }, | |
| { "HIF_Q2", 10, 0, MT_HIF0 + 2 }, | |
| { "HIF_Q3", 11, 0, MT_HIF0 + 3 }, | |
| { "HIF_Q4", 12, 0, MT_HIF0 + 4 }, | |
| { "HIF_Q5", 13, 0, MT_HIF0 + 5 }, | |
| { "LMAC_Q", 16, 2, 0 }, | |
| { "MDP_TXQ", 17, 2, 1 }, | |
| { "MDP_RXQ", 18, 2, 2 }, | |
| { "SEC_TXQ", 19, 2, 3 }, | |
| { "SEC_RXQ", 20, 2, 4 }, | |
| }; | |
| u32 val, head, tail; | |
| /* ple queue */ | |
| val = mt76_rr(dev, MT_PLE_FREEPG_CNT); | |
| head = mt76_get_field(dev, MT_PLE_FREEPG_HEAD_TAIL, GENMASK(11, 0)); | |
| tail = mt76_get_field(dev, MT_PLE_FREEPG_HEAD_TAIL, GENMASK(27, 16)); | |
| seq_puts(file, "PLE page info:\n"); | |
| seq_printf(file, | |
| "\tTotal free page: 0x%08x head: 0x%03x tail: 0x%03x\n", | |
| val, head, tail); | |
| val = mt76_rr(dev, MT_PLE_PG_HIF_GROUP); | |
| head = mt76_get_field(dev, MT_PLE_HIF_PG_INFO, GENMASK(11, 0)); | |
| tail = mt76_get_field(dev, MT_PLE_HIF_PG_INFO, GENMASK(27, 16)); | |
| seq_printf(file, "\tHIF free page: 0x%03x res: 0x%03x used: 0x%03x\n", | |
| val, head, tail); | |
| seq_puts(file, "PLE non-empty queue info:\n"); | |
| mt7915_hw_queue_read(file, ARRAY_SIZE(ple_queue_map), | |
| &ple_queue_map[0]); | |
| /* iterate per-sta ple queue */ | |
| ieee80211_iterate_stations_atomic(phy->mt76->hw, | |
| mt7915_sta_hw_queue_read, file); | |
| /* pse queue */ | |
| seq_puts(file, "PSE non-empty queue info:\n"); | |
| mt7915_hw_queue_read(file, ARRAY_SIZE(pse_queue_map), | |
| &pse_queue_map[0]); | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(mt7915_hw_queues); | |
| static int | |
| mt7915_xmit_queues_show(struct seq_file *file, void *data) | |
| { | |
| struct mt7915_phy *phy = file->private; | |
| struct mt7915_dev *dev = phy->dev; | |
| struct { | |
| struct mt76_queue *q; | |
| char *queue; | |
| } queue_map[] = { | |
| { phy->mt76->q_tx[MT_TXQ_BE], " MAIN" }, | |
| { dev->mt76.q_mcu[MT_MCUQ_WM], " MCUWM" }, | |
| { dev->mt76.q_mcu[MT_MCUQ_WA], " MCUWA" }, | |
| { dev->mt76.q_mcu[MT_MCUQ_FWDL], "MCUFWDL" }, | |
| }; | |
| int i; | |
| seq_puts(file, " queue | hw-queued | head | tail |\n"); | |
| for (i = 0; i < ARRAY_SIZE(queue_map); i++) { | |
| struct mt76_queue *q = queue_map[i].q; | |
| if (!q) | |
| continue; | |
| seq_printf(file, " %s | %9d | %9d | %9d |\n", | |
| queue_map[i].queue, q->queued, q->head, | |
| q->tail); | |
| } | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(mt7915_xmit_queues); | |
| #define mt7915_txpower_puts(rate) \ | |
| ({ \ | |
| len += scnprintf(buf + len, sz - len, "%-16s:", #rate " (TMAC)"); \ | |
| for (i = 0; i < mt7915_sku_group_len[SKU_##rate]; i++, offs++) \ | |
| len += scnprintf(buf + len, sz - len, " %6d", txpwr[offs]); \ | |
| len += scnprintf(buf + len, sz - len, "\n"); \ | |
| }) | |
| #define mt7915_txpower_sets(rate, pwr, flag) \ | |
| ({ \ | |
| offs += len; \ | |
| len = mt7915_sku_group_len[rate]; \ | |
| if (mode == flag) { \ | |
| for (i = 0; i < len; i++) \ | |
| req.txpower_sku[offs + i] = pwr; \ | |
| } \ | |
| }) | |
| static ssize_t | |
| mt7915_rate_txpower_get(struct file *file, char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct mt7915_phy *phy = file->private_data; | |
| struct mt7915_dev *dev = phy->dev; | |
| s8 txpwr[MT7915_SKU_RATE_NUM]; | |
| static const size_t sz = 2048; | |
| u8 band = phy->mt76->band_idx; | |
| int i, offs = 0, len = 0; | |
| ssize_t ret; | |
| char *buf; | |
| u32 reg; | |
| buf = kzalloc(sz, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| ret = mt7915_mcu_get_txpower_sku(phy, txpwr, sizeof(txpwr), TX_POWER_INFO_RATE); | |
| if (ret) | |
| goto out; | |
| /* Txpower propagation path: TMAC -> TXV -> BBP */ | |
| len += scnprintf(buf + len, sz - len, | |
| "\nPhy%d Tx power table (channel %d)\n", | |
| phy != &dev->phy, phy->mt76->chandef.chan->hw_value); | |
| len += scnprintf(buf + len, sz - len, "%-16s %6s %6s %6s %6s\n", | |
| " ", "1m", "2m", "5m", "11m"); | |
| mt7915_txpower_puts(CCK); | |
| len += scnprintf(buf + len, sz - len, | |
| "%-16s %6s %6s %6s %6s %6s %6s %6s %6s\n", | |
| " ", "6m", "9m", "12m", "18m", "24m", "36m", "48m", | |
| "54m"); | |
| mt7915_txpower_puts(OFDM); | |
| len += scnprintf(buf + len, sz - len, | |
| "%-16s %6s %6s %6s %6s %6s %6s %6s %6s\n", | |
| " ", "mcs0", "mcs1", "mcs2", "mcs3", "mcs4", | |
| "mcs5", "mcs6", "mcs7"); | |
| mt7915_txpower_puts(HT_BW20); | |
| len += scnprintf(buf + len, sz - len, | |
| "%-16s %6s %6s %6s %6s %6s %6s %6s %6s %6s\n", | |
| " ", "mcs0", "mcs1", "mcs2", "mcs3", "mcs4", "mcs5", | |
| "mcs6", "mcs7", "mcs32"); | |
| mt7915_txpower_puts(HT_BW40); | |
| len += scnprintf(buf + len, sz - len, | |
| "%-16s %6s %6s %6s %6s %6s %6s %6s %6s %6s %6s %6s %6s\n", | |
| " ", "mcs0", "mcs1", "mcs2", "mcs3", "mcs4", "mcs5", | |
| "mcs6", "mcs7", "mcs8", "mcs9", "mcs10", "mcs11"); | |
| mt7915_txpower_puts(VHT_BW20); | |
| mt7915_txpower_puts(VHT_BW40); | |
| mt7915_txpower_puts(VHT_BW80); | |
| mt7915_txpower_puts(VHT_BW160); | |
| mt7915_txpower_puts(HE_RU26); | |
| mt7915_txpower_puts(HE_RU52); | |
| mt7915_txpower_puts(HE_RU106); | |
| mt7915_txpower_puts(HE_RU242); | |
| mt7915_txpower_puts(HE_RU484); | |
| mt7915_txpower_puts(HE_RU996); | |
| mt7915_txpower_puts(HE_RU2x996); | |
| reg = is_mt7915(&dev->mt76) ? MT_WF_PHY_TPC_CTRL_STAT(band) : | |
| MT_WF_PHY_TPC_CTRL_STAT_MT7916(band); | |
| len += scnprintf(buf + len, sz - len, "\nTx power (bbp) : %6ld\n", | |
| mt76_get_field(dev, reg, MT_WF_PHY_TPC_POWER)); | |
| ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); | |
| out: | |
| kfree(buf); | |
| return ret; | |
| } | |
| static ssize_t | |
| mt7915_rate_txpower_set(struct file *file, const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| int i, ret, pwr, pwr160 = 0, pwr80 = 0, pwr40 = 0, pwr20 = 0; | |
| struct mt7915_phy *phy = file->private_data; | |
| struct mt7915_dev *dev = phy->dev; | |
| struct mt76_phy *mphy = phy->mt76; | |
| struct mt7915_mcu_txpower_sku req = { | |
| .format_id = TX_POWER_LIMIT_TABLE, | |
| .band_idx = phy->mt76->band_idx, | |
| }; | |
| char buf[100]; | |
| enum mac80211_rx_encoding mode; | |
| u32 offs = 0, len = 0; | |
| if (count >= sizeof(buf)) | |
| return -EINVAL; | |
| if (copy_from_user(buf, user_buf, count)) | |
| return -EFAULT; | |
| if (count && buf[count - 1] == '\n') | |
| buf[count - 1] = '\0'; | |
| else | |
| buf[count] = '\0'; | |
| if (sscanf(buf, "%u %u %u %u %u", | |
| &mode, &pwr160, &pwr80, &pwr40, &pwr20) != 5) { | |
| dev_warn(dev->mt76.dev, | |
| "per bandwidth power limit: Mode BW160 BW80 BW40 BW20"); | |
| return -EINVAL; | |
| } | |
| if (mode > RX_ENC_HE) | |
| return -EINVAL; | |
| if (pwr160) | |
| pwr160 = mt76_get_power_bound(mphy, pwr160); | |
| if (pwr80) | |
| pwr80 = mt76_get_power_bound(mphy, pwr80); | |
| if (pwr40) | |
| pwr40 = mt76_get_power_bound(mphy, pwr40); | |
| if (pwr20) | |
| pwr20 = mt76_get_power_bound(mphy, pwr20); | |
| if (pwr160 < 0 || pwr80 < 0 || pwr40 < 0 || pwr20 < 0) | |
| return -EINVAL; | |
| mutex_lock(&dev->mt76.mutex); | |
| ret = mt7915_mcu_get_txpower_sku(phy, req.txpower_sku, | |
| sizeof(req.txpower_sku), TX_POWER_INFO_RATE); | |
| if (ret) | |
| goto out; | |
| mt7915_txpower_sets(SKU_CCK, pwr20, RX_ENC_LEGACY); | |
| mt7915_txpower_sets(SKU_OFDM, pwr20, RX_ENC_LEGACY); | |
| if (mode == RX_ENC_LEGACY) | |
| goto skip; | |
| mt7915_txpower_sets(SKU_HT_BW20, pwr20, RX_ENC_HT); | |
| mt7915_txpower_sets(SKU_HT_BW40, pwr40, RX_ENC_HT); | |
| if (mode == RX_ENC_HT) | |
| goto skip; | |
| mt7915_txpower_sets(SKU_VHT_BW20, pwr20, RX_ENC_VHT); | |
| mt7915_txpower_sets(SKU_VHT_BW40, pwr40, RX_ENC_VHT); | |
| mt7915_txpower_sets(SKU_VHT_BW80, pwr80, RX_ENC_VHT); | |
| mt7915_txpower_sets(SKU_VHT_BW160, pwr160, RX_ENC_VHT); | |
| if (mode == RX_ENC_VHT) | |
| goto skip; | |
| mt7915_txpower_sets(SKU_HE_RU26, pwr20, RX_ENC_HE + 1); | |
| mt7915_txpower_sets(SKU_HE_RU52, pwr20, RX_ENC_HE + 1); | |
| mt7915_txpower_sets(SKU_HE_RU106, pwr20, RX_ENC_HE + 1); | |
| mt7915_txpower_sets(SKU_HE_RU242, pwr20, RX_ENC_HE); | |
| mt7915_txpower_sets(SKU_HE_RU484, pwr40, RX_ENC_HE); | |
| mt7915_txpower_sets(SKU_HE_RU996, pwr80, RX_ENC_HE); | |
| mt7915_txpower_sets(SKU_HE_RU2x996, pwr160, RX_ENC_HE); | |
| skip: | |
| ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(TX_POWER_FEATURE_CTRL), | |
| &req, sizeof(req), true); | |
| if (ret) | |
| goto out; | |
| pwr = max3(pwr80, pwr40, pwr20); | |
| mphy->txpower_cur = max3(mphy->txpower_cur, pwr160, pwr); | |
| out: | |
| mutex_unlock(&dev->mt76.mutex); | |
| return ret ? ret : count; | |
| } | |
| static const struct file_operations mt7915_txpower_fops = { | |
| .write = mt7915_rate_txpower_set, | |
| .read = mt7915_rate_txpower_get, | |
| .open = simple_open, | |
| .owner = THIS_MODULE, | |
| .llseek = default_llseek, | |
| }; | |
| static int | |
| mt7915_path_txpower_show(struct seq_file *file) | |
| { | |
| struct mt7915_phy *phy = file->private; | |
| s8 txpower[MT7915_SKU_PATH_NUM], *buf = txpower; | |
| int ret; | |
| #define PATH_POWER_SHOW(_name, _len, _skip) do { \ | |
| size_t __len = (_len); \ | |
| if (_skip) { \ | |
| buf -= 1; \ | |
| *buf = 0; \ | |
| } \ | |
| mt76_seq_puts_array(file, _name, buf, __len); \ | |
| buf += __len; \ | |
| } while (0) | |
| seq_printf(file, "\n%*c", 18, ' '); | |
| seq_puts(file, "1T1S/2T1S/3T1S/4T1S/2T2S/3T2S/4T2S/3T3S/4T3S/4T4S\n"); | |
| ret = mt7915_mcu_get_txpower_sku(phy, txpower, sizeof(txpower), | |
| TX_POWER_INFO_PATH); | |
| if (ret) | |
| return ret; | |
| PATH_POWER_SHOW("CCK", 4, 0); | |
| PATH_POWER_SHOW("OFDM", 4, 0); | |
| PATH_POWER_SHOW("BF-OFDM", 4, 1); | |
| PATH_POWER_SHOW("HT/VHT20", 10, 0); | |
| PATH_POWER_SHOW("BF-HT/VHT20", 10, 1); | |
| PATH_POWER_SHOW("HT/VHT40", 10, 0); | |
| PATH_POWER_SHOW("BF-HT/VHT40", 10, 1); | |
| PATH_POWER_SHOW("BW20/RU242", 10, 0); | |
| PATH_POWER_SHOW("BF-BW20/RU242", 10, 1); | |
| PATH_POWER_SHOW("BW40/RU484", 10, 0); | |
| PATH_POWER_SHOW("BF-BW40/RU484", 10, 1); | |
| PATH_POWER_SHOW("BW80/RU996", 10, 0); | |
| PATH_POWER_SHOW("BF-BW80/RU996", 10, 1); | |
| PATH_POWER_SHOW("BW160/RU2x996", 10, 0); | |
| PATH_POWER_SHOW("BF-BW160/RU2x996", 10, 1); | |
| PATH_POWER_SHOW("RU26", 10, 0); | |
| PATH_POWER_SHOW("BF-RU26", 10, 0); | |
| PATH_POWER_SHOW("RU52", 10, 0); | |
| PATH_POWER_SHOW("BF-RU52", 10, 0); | |
| PATH_POWER_SHOW("RU106", 10, 0); | |
| PATH_POWER_SHOW("BF-RU106", 10, 0); | |
| #undef PATH_POWER_SHOW | |
| return 0; | |
| } | |
| static int | |
| mt7915_txpower_path_show(struct seq_file *file, void *data) | |
| { | |
| struct mt7915_phy *phy = file->private; | |
| seq_printf(file, "\nBand %d\n", phy != &phy->dev->phy); | |
| return mt7915_path_txpower_show(file); | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(mt7915_txpower_path); | |
| static int | |
| mt7915_twt_stats(struct seq_file *s, void *data) | |
| { | |
| struct mt7915_dev *dev = dev_get_drvdata(s->private); | |
| struct mt7915_twt_flow *iter; | |
| rcu_read_lock(); | |
| seq_puts(s, " wcid | id | flags | exp | mantissa"); | |
| seq_puts(s, " | duration | tsf |\n"); | |
| list_for_each_entry_rcu(iter, &dev->twt_list, list) | |
| seq_printf(s, | |
| "%9d | %8d | %5c%c%c%c | %8d | %8d | %8d | %14lld |\n", | |
| iter->wcid, iter->id, | |
| iter->sched ? 's' : 'u', | |
| iter->protection ? 'p' : '-', | |
| iter->trigger ? 't' : '-', | |
| iter->flowtype ? '-' : 'a', | |
| iter->exp, iter->mantissa, | |
| iter->duration, iter->tsf); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| /* The index of RF registers use the generic regidx, combined with two parts: | |
| * WF selection [31:24] and offset [23:0]. | |
| */ | |
| static int | |
| mt7915_rf_regval_get(void *data, u64 *val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| u32 regval; | |
| int ret; | |
| ret = mt7915_mcu_rf_regval(dev, dev->mt76.debugfs_reg, ®val, false); | |
| if (ret) | |
| return ret; | |
| *val = regval; | |
| return 0; | |
| } | |
| static int | |
| mt7915_rf_regval_set(void *data, u64 val) | |
| { | |
| struct mt7915_dev *dev = data; | |
| u32 val32 = val; | |
| return mt7915_mcu_rf_regval(dev, dev->mt76.debugfs_reg, &val32, true); | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_rf_regval, mt7915_rf_regval_get, | |
| mt7915_rf_regval_set, "0x%08llx\n"); | |
| int mt7915_init_debugfs(struct mt7915_phy *phy) | |
| { | |
| struct mt7915_dev *dev = phy->dev; | |
| bool ext_phy = phy != &dev->phy; | |
| struct dentry *dir; | |
| dir = mt76_register_debugfs_fops(phy->mt76, NULL); | |
| debugfs_create_file("muru_debug", 0600, dir, dev, &fops_muru_debug); | |
| debugfs_create_file("muru_stats", 0400, dir, phy, | |
| &mt7915_muru_stats_fops); | |
| debugfs_create_file("hw-queues", 0400, dir, phy, | |
| &mt7915_hw_queues_fops); | |
| debugfs_create_file("xmit-queues", 0400, dir, phy, | |
| &mt7915_xmit_queues_fops); | |
| debugfs_create_file("tx_stats", 0400, dir, phy, &mt7915_tx_stats_fops); | |
| debugfs_create_file("sys_recovery", 0600, dir, phy, | |
| &mt7915_sys_recovery_ops); | |
| debugfs_create_file("fw_debug_wm", 0600, dir, dev, &fops_fw_debug_wm); | |
| debugfs_create_file("fw_debug_wa", 0600, dir, dev, &fops_fw_debug_wa); | |
| debugfs_create_file("fw_debug_bin", 0600, dir, dev, &fops_fw_debug_bin); | |
| debugfs_create_file("fw_util_wm", 0400, dir, dev, | |
| &mt7915_fw_util_wm_fops); | |
| debugfs_create_file("fw_util_wa", 0400, dir, dev, | |
| &mt7915_fw_util_wa_fops); | |
| debugfs_create_file("implicit_txbf", 0600, dir, dev, | |
| &fops_implicit_txbf); | |
| debugfs_create_file("txpower_sku", 0400, dir, phy, | |
| &mt7915_txpower_fops); | |
| debugfs_create_file("txpower_path", 0400, dir, phy, | |
| &mt7915_txpower_path_fops); | |
| debugfs_create_devm_seqfile(dev->mt76.dev, "twt_stats", dir, | |
| mt7915_twt_stats); | |
| debugfs_create_file("rf_regval", 0600, dir, dev, &fops_rf_regval); | |
| if (!dev->dbdc_support || phy->mt76->band_idx) { | |
| debugfs_create_u32("dfs_hw_pattern", 0400, dir, | |
| &dev->hw_pattern); | |
| debugfs_create_file("radar_trigger", 0200, dir, phy, | |
| &fops_radar_trigger); | |
| debugfs_create_devm_seqfile(dev->mt76.dev, "rdd_monitor", dir, | |
| mt7915_rdd_monitor); | |
| } | |
| if (!ext_phy) | |
| dev->debugfs_dir = dir; | |
| return 0; | |
| } | |
| static void | |
| mt7915_debugfs_write_fwlog(struct mt7915_dev *dev, const void *hdr, int hdrlen, | |
| const void *data, int len) | |
| { | |
| static DEFINE_SPINLOCK(lock); | |
| unsigned long flags; | |
| void *dest; | |
| spin_lock_irqsave(&lock, flags); | |
| dest = relay_reserve(dev->relay_fwlog, hdrlen + len + 4); | |
| if (dest) { | |
| *(u32 *)dest = hdrlen + len; | |
| dest += 4; | |
| if (hdrlen) { | |
| memcpy(dest, hdr, hdrlen); | |
| dest += hdrlen; | |
| } | |
| memcpy(dest, data, len); | |
| relay_flush(dev->relay_fwlog); | |
| } | |
| spin_unlock_irqrestore(&lock, flags); | |
| } | |
| void mt7915_debugfs_rx_fw_monitor(struct mt7915_dev *dev, const void *data, int len) | |
| { | |
| struct { | |
| __le32 magic; | |
| __le32 timestamp; | |
| __le16 msg_type; | |
| __le16 len; | |
| } hdr = { | |
| .magic = cpu_to_le32(FW_BIN_LOG_MAGIC), | |
| .msg_type = cpu_to_le16(PKT_TYPE_RX_FW_MONITOR), | |
| }; | |
| if (!dev->relay_fwlog) | |
| return; | |
| hdr.timestamp = cpu_to_le32(mt76_rr(dev, MT_LPON_FRCR(0))); | |
| hdr.len = *(__le16 *)data; | |
| mt7915_debugfs_write_fwlog(dev, &hdr, sizeof(hdr), data, len); | |
| } | |
| bool mt7915_debugfs_rx_log(struct mt7915_dev *dev, const void *data, int len) | |
| { | |
| if (get_unaligned_le32(data) != FW_BIN_LOG_MAGIC) | |
| return false; | |
| if (dev->relay_fwlog) | |
| mt7915_debugfs_write_fwlog(dev, NULL, 0, data, len); | |
| return true; | |
| } | |
| #ifdef CONFIG_MAC80211_DEBUGFS | |
| /** per-station debugfs **/ | |
| static ssize_t mt7915_sta_fixed_rate_set(struct file *file, | |
| const char __user *user_buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct ieee80211_sta *sta = file->private_data; | |
| struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv; | |
| struct mt7915_dev *dev = msta->vif->phy->dev; | |
| struct ieee80211_vif *vif; | |
| struct sta_phy phy = {}; | |
| char buf[100]; | |
| int ret; | |
| u32 field; | |
| u8 i, gi, he_ltf; | |
| if (count >= sizeof(buf)) | |
| return -EINVAL; | |
| if (copy_from_user(buf, user_buf, count)) | |
| return -EFAULT; | |
| if (count && buf[count - 1] == '\n') | |
| buf[count - 1] = '\0'; | |
| else | |
| buf[count] = '\0'; | |
| /* mode - cck: 0, ofdm: 1, ht: 2, gf: 3, vht: 4, he_su: 8, he_er: 9 | |
| * bw - bw20: 0, bw40: 1, bw80: 2, bw160: 3 | |
| * nss - vht: 1~4, he: 1~4, others: ignore | |
| * mcs - cck: 0~4, ofdm: 0~7, ht: 0~32, vht: 0~9, he_su: 0~11, he_er: 0~2 | |
| * gi - (ht/vht) lgi: 0, sgi: 1; (he) 0.8us: 0, 1.6us: 1, 3.2us: 2 | |
| * ldpc - off: 0, on: 1 | |
| * stbc - off: 0, on: 1 | |
| * he_ltf - 1xltf: 0, 2xltf: 1, 4xltf: 2 | |
| */ | |
| if (sscanf(buf, "%hhu %hhu %hhu %hhu %hhu %hhu %hhu %hhu", | |
| &phy.type, &phy.bw, &phy.nss, &phy.mcs, &gi, | |
| &phy.ldpc, &phy.stbc, &he_ltf) != 8) { | |
| dev_warn(dev->mt76.dev, | |
| "format: Mode BW NSS MCS (HE)GI LDPC STBC HE_LTF\n"); | |
| field = RATE_PARAM_AUTO; | |
| goto out; | |
| } | |
| phy.ldpc = (phy.bw || phy.ldpc) * GENMASK(2, 0); | |
| for (i = 0; i <= phy.bw; i++) { | |
| phy.sgi |= gi << (i << sta->deflink.he_cap.has_he); | |
| phy.he_ltf |= he_ltf << (i << sta->deflink.he_cap.has_he); | |
| } | |
| field = RATE_PARAM_FIXED; | |
| out: | |
| vif = container_of((void *)msta->vif, struct ieee80211_vif, drv_priv); | |
| ret = mt7915_mcu_set_fixed_rate_ctrl(dev, vif, sta, &phy, field); | |
| if (ret) | |
| return -EFAULT; | |
| return count; | |
| } | |
| static const struct file_operations fops_fixed_rate = { | |
| .write = mt7915_sta_fixed_rate_set, | |
| .open = simple_open, | |
| .owner = THIS_MODULE, | |
| .llseek = default_llseek, | |
| }; | |
| static int | |
| mt7915_queues_show(struct seq_file *s, void *data) | |
| { | |
| struct ieee80211_sta *sta = s->private; | |
| mt7915_sta_hw_queue_read(s, sta); | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(mt7915_queues); | |
| void mt7915_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, struct dentry *dir) | |
| { | |
| debugfs_create_file("fixed_rate", 0600, dir, sta, &fops_fixed_rate); | |
| debugfs_create_file("hw-queues", 0400, dir, sta, &mt7915_queues_fops); | |
| } | |
| #endif |