| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Renesas RZ/G2L USBPHY control driver |
| * |
| * Copyright (C) 2021 Renesas Electronics Corporation |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/reset.h> |
| #include <linux/reset-controller.h> |
| |
| #define RESET 0x000 |
| #define VBENCTL 0x03c |
| |
| #define RESET_SEL_PLLRESET BIT(12) |
| #define RESET_PLLRESET BIT(8) |
| |
| #define RESET_SEL_P2RESET BIT(5) |
| #define RESET_SEL_P1RESET BIT(4) |
| #define RESET_PHYRST_2 BIT(1) |
| #define RESET_PHYRST_1 BIT(0) |
| |
| #define PHY_RESET_PORT2 (RESET_SEL_P2RESET | RESET_PHYRST_2) |
| #define PHY_RESET_PORT1 (RESET_SEL_P1RESET | RESET_PHYRST_1) |
| |
| #define NUM_PORTS 2 |
| |
| struct rzg2l_usbphy_ctrl_priv { |
| struct reset_controller_dev rcdev; |
| struct reset_control *rstc; |
| void __iomem *base; |
| struct platform_device *vdev; |
| |
| spinlock_t lock; |
| }; |
| |
| #define rcdev_to_priv(x) container_of(x, struct rzg2l_usbphy_ctrl_priv, rcdev) |
| |
| static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); |
| u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2; |
| void __iomem *base = priv->base; |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| val = readl(base + RESET); |
| val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; |
| if (port_mask == (val & port_mask)) |
| val |= RESET_PLLRESET; |
| writel(val, base + RESET); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return 0; |
| } |
| |
| static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); |
| void __iomem *base = priv->base; |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| val = readl(base + RESET); |
| |
| val |= RESET_SEL_PLLRESET; |
| val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1)); |
| writel(val, base + RESET); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return 0; |
| } |
| |
| static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); |
| u32 port_mask; |
| |
| port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; |
| |
| return !!(readl(priv->base + RESET) & port_mask); |
| } |
| |
| static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = { |
| { .compatible = "renesas,rzg2l-usbphy-ctrl" }, |
| { /* Sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table); |
| |
| static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = { |
| .assert = rzg2l_usbphy_ctrl_assert, |
| .deassert = rzg2l_usbphy_ctrl_deassert, |
| .status = rzg2l_usbphy_ctrl_status, |
| }; |
| |
| static const struct regmap_config rzg2l_usb_regconf = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 1, |
| }; |
| |
| static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct rzg2l_usbphy_ctrl_priv *priv; |
| struct platform_device *vdev; |
| struct regmap *regmap; |
| unsigned long flags; |
| int error; |
| u32 val; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| regmap = devm_regmap_init_mmio(dev, priv->base + VBENCTL, &rzg2l_usb_regconf); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); |
| if (IS_ERR(priv->rstc)) |
| return dev_err_probe(dev, PTR_ERR(priv->rstc), |
| "failed to get reset\n"); |
| |
| error = reset_control_deassert(priv->rstc); |
| if (error) |
| return error; |
| |
| spin_lock_init(&priv->lock); |
| dev_set_drvdata(dev, priv); |
| |
| pm_runtime_enable(&pdev->dev); |
| error = pm_runtime_resume_and_get(&pdev->dev); |
| if (error < 0) { |
| dev_err_probe(&pdev->dev, error, "pm_runtime_resume_and_get failed"); |
| goto err_pm_disable_reset_deassert; |
| } |
| |
| /* put pll and phy into reset state */ |
| spin_lock_irqsave(&priv->lock, flags); |
| val = readl(priv->base + RESET); |
| val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 | PHY_RESET_PORT1; |
| writel(val, priv->base + RESET); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops; |
| priv->rcdev.of_reset_n_cells = 1; |
| priv->rcdev.nr_resets = NUM_PORTS; |
| priv->rcdev.of_node = dev->of_node; |
| priv->rcdev.dev = dev; |
| |
| error = devm_reset_controller_register(dev, &priv->rcdev); |
| if (error) |
| goto err_pm_runtime_put; |
| |
| vdev = platform_device_alloc("rzg2l-usb-vbus-regulator", pdev->id); |
| if (!vdev) { |
| error = -ENOMEM; |
| goto err_pm_runtime_put; |
| } |
| vdev->dev.parent = dev; |
| priv->vdev = vdev; |
| |
| error = platform_device_add(vdev); |
| if (error) |
| goto err_device_put; |
| |
| return 0; |
| |
| err_device_put: |
| platform_device_put(vdev); |
| err_pm_runtime_put: |
| pm_runtime_put(&pdev->dev); |
| err_pm_disable_reset_deassert: |
| pm_runtime_disable(&pdev->dev); |
| reset_control_assert(priv->rstc); |
| return error; |
| } |
| |
| static void rzg2l_usbphy_ctrl_remove(struct platform_device *pdev) |
| { |
| struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev); |
| |
| platform_device_unregister(priv->vdev); |
| pm_runtime_put(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| reset_control_assert(priv->rstc); |
| } |
| |
| static struct platform_driver rzg2l_usbphy_ctrl_driver = { |
| .driver = { |
| .name = "rzg2l_usbphy_ctrl", |
| .of_match_table = rzg2l_usbphy_ctrl_match_table, |
| }, |
| .probe = rzg2l_usbphy_ctrl_probe, |
| .remove_new = rzg2l_usbphy_ctrl_remove, |
| }; |
| module_platform_driver(rzg2l_usbphy_ctrl_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control"); |
| MODULE_AUTHOR("biju.das.jz@bp.renesas.com>"); |