blob: 1e745a8d439c89a7f5139f263d38bdf97dc5d43c [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
if GREYBUS
config GREYBUS_AUDIO
tristate "Greybus Audio Class driver"
depends on SOUND && SND_SOC
help
Select this option if you have a device that follows the
Greybus Audio Class specification.
To compile this code as a module, chose M here: the module
will be called gb-audio.ko
config GREYBUS_AUDIO_APB_CODEC
tristate "Greybus APBridge Audio codec driver"
depends on SND_SOC && GREYBUS_AUDIO
help
Select this option if you have a Toshiba APB device that has I2S
ports and acts as a Greybus "Dummy codec". This device is a
bridge from an APB-I2S port to a Unipro network.
To compile this code as a module, chose M here: the module
will be called gb-audio-codec.ko
config GREYBUS_BOOTROM
tristate "Greybus Bootrom Class driver"
help
Select this option if you have a device that follows the
Greybus Bootrom Class specification.
To compile this code as a module, chose M here: the module
will be called gb-bootrom.ko
config GREYBUS_CAMERA
tristate "Greybus Camera Class driver"
depends on MEDIA_SUPPORT && LEDS_CLASS_FLASH && BROKEN
help
Select this option if you have a device that follows the
Greybus Camera Class specification.
To compile this code as a module, chose M here: the module
will be called gb-camera.ko
config GREYBUS_FIRMWARE
tristate "Greybus Firmware Download Class driver"
depends on SPI
help
Select this option if you have a device that follows the
Greybus Firmware Download Class specification.
To compile this code as a module, chose M here: the module
will be called gb-firmware.ko
config GREYBUS_HID
tristate "Greybus HID Class driver"
depends on HID && INPUT
help
Select this option if you have a device that follows the
Greybus HID Class specification.
To compile this code as a module, chose M here: the module
will be called gb-hid.ko
config GREYBUS_LIGHT
tristate "Greybus LED Class driver"
depends on LEDS_CLASS_FLASH
help
Select this option if you have a device that follows the
Greybus LED Class specification.
To compile this code as a module, chose M here: the module
will be called gb-light.ko
config GREYBUS_LOG
tristate "Greybus Debug Log Class driver"
help
Select this option if you have a device that follows the
Greybus Debug Log Class specification.
To compile this code as a module, chose M here: the module
will be called gb-log.ko
config GREYBUS_LOOPBACK
tristate "Greybus Loopback Class driver"
help
Select this option if you have a device that follows the
Greybus Debug Log Class specification.
To compile this code as a module, chose M here: the module
will be called gb-log.ko
config GREYBUS_POWER
tristate "Greybus Powersupply Class driver"
depends on POWER_SUPPLY
help
Select this option if you have a device that follows the
Greybus Powersupply Class specification.
To compile this code as a module, chose M here: the module
will be called gb-power-supply.ko
config GREYBUS_RAW
tristate "Greybus Raw Class driver"
help
Select this option if you have a device that follows the
Greybus Raw Class specification.
To compile this code as a module, chose M here: the module
will be called gb-raw.ko
config GREYBUS_VIBRATOR
tristate "Greybus Vibrator Motor Class driver"
help
Select this option if you have a device that follows the
Greybus Vibrator Motor Class specification.
To compile this code as a module, chose M here: the module
will be called gb-vibrator.ko
menuconfig GREYBUS_BRIDGED_PHY
tristate "Greybus Bridged PHY Class drivers"
help
Select this option to pick from a variety of Greybus Bridged
PHY class drivers. These drivers emulate a number of
different "traditional" busses by tunneling them over Greybus.
Examples of this include serial, SPI, USB, and others.
To compile this code as a module, chose M here: the module
will be called gb-phy.ko
if GREYBUS_BRIDGED_PHY
config GREYBUS_GPIO
tristate "Greybus GPIO Bridged PHY driver"
depends on GPIOLIB
select GPIOLIB_IRQCHIP
help
Select this option if you have a device that follows the
Greybus GPIO Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-gpio.ko
config GREYBUS_I2C
tristate "Greybus I2C Bridged PHY driver"
depends on I2C
help
Select this option if you have a device that follows the
Greybus I2C Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-i2c.ko
config GREYBUS_PWM
tristate "Greybus PWM Bridged PHY driver"
depends on PWM
help
Select this option if you have a device that follows the
Greybus PWM Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-pwm.ko
config GREYBUS_SDIO
tristate "Greybus SDIO Bridged PHY driver"
depends on MMC
help
Select this option if you have a device that follows the
Greybus SDIO Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-sdio.ko
config GREYBUS_SPI
tristate "Greybus SPI Bridged PHY driver"
depends on SPI
help
Select this option if you have a device that follows the
Greybus SPI Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-spi.ko
config GREYBUS_UART
tristate "Greybus UART Bridged PHY driver"
depends on TTY
help
Select this option if you have a device that follows the
Greybus UART Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-uart.ko
config GREYBUS_USB
tristate "Greybus USB Host Bridged PHY driver"
depends on USB
help
Select this option if you have a device that follows the
Greybus USB Host Bridged PHY Class specification.
To compile this code as a module, chose M here: the module
will be called gb-usb.ko
endif # GREYBUS_BRIDGED_PHY
config GREYBUS_ARCHE
tristate "Greybus Arche Platform driver"
depends on USB_HSIC_USB3613 || COMPILE_TEST
help
Select this option if you have an Arche device.
To compile this code as a module, chose M here: the module
will be called gb-arche.ko
endif # GREYBUS