blob: e93850f6447ac3c639cba8318dbc5ac8ac5a38e5 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* KGDB NMI serial console
*
* Copyright 2010 Google, Inc.
* Arve Hjønnevåg <arve@android.com>
* Colin Cross <ccross@android.com>
* Copyright 2012 Linaro Ltd.
* Anton Vorontsov <anton.vorontsov@linaro.org>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/compiler.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/atomic.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/interrupt.h>
#include <linux/hrtimer.h>
#include <linux/tick.h>
#include <linux/kfifo.h>
#include <linux/kgdb.h>
#include <linux/kdb.h>
static int kgdb_nmi_knock = 1;
module_param_named(knock, kgdb_nmi_knock, int, 0600);
MODULE_PARM_DESC(knock, "if set to 1 (default), the special '$3#33' command " \
"must be used to enter the debugger; when set to 0, " \
"hitting return key is enough to enter the debugger; " \
"when set to -1, the debugger is entered immediately " \
"upon NMI");
static char *kgdb_nmi_magic = "$3#33";
module_param_named(magic, kgdb_nmi_magic, charp, 0600);
MODULE_PARM_DESC(magic, "magic sequence to enter NMI debugger (default $3#33)");
static atomic_t kgdb_nmi_num_readers = ATOMIC_INIT(0);
static int kgdb_nmi_console_setup(struct console *co, char *options)
{
arch_kgdb_ops.enable_nmi(1);
/* The NMI console uses the dbg_io_ops to issue console messages. To
* avoid duplicate messages during kdb sessions we must inform kdb's
* I/O utilities that messages sent to the console will automatically
* be displayed on the dbg_io.
*/
dbg_io_ops->cons = co;
return 0;
}
static void kgdb_nmi_console_write(struct console *co, const char *s, uint c)
{
int i;
for (i = 0; i < c; i++)
dbg_io_ops->write_char(s[i]);
}
static struct tty_driver *kgdb_nmi_tty_driver;
static struct tty_driver *kgdb_nmi_console_device(struct console *co, int *idx)
{
*idx = co->index;
return kgdb_nmi_tty_driver;
}
static struct console kgdb_nmi_console = {
.name = "ttyNMI",
.setup = kgdb_nmi_console_setup,
.write = kgdb_nmi_console_write,
.device = kgdb_nmi_console_device,
.flags = CON_PRINTBUFFER | CON_ANYTIME,
.index = -1,
};
/*
* This is usually the maximum rate on debug ports. We make fifo large enough
* to make copy-pasting to the terminal usable.
*/
#define KGDB_NMI_BAUD 115200
#define KGDB_NMI_FIFO_SIZE roundup_pow_of_two(KGDB_NMI_BAUD / 8 / HZ)
struct kgdb_nmi_tty_priv {
struct tty_port port;
struct timer_list timer;
STRUCT_KFIFO(char, KGDB_NMI_FIFO_SIZE) fifo;
};
static struct tty_port *kgdb_nmi_port;
static void kgdb_tty_recv(int ch)
{
struct kgdb_nmi_tty_priv *priv;
char c = ch;
if (!kgdb_nmi_port || ch < 0)
return;
/*
* Can't use port->tty->driver_data as tty might be not there. Timer
* will check for tty and will get the ref, but here we don't have to
* do that, and actually, we can't: we're in NMI context, no locks are
* possible.
*/
priv = container_of(kgdb_nmi_port, struct kgdb_nmi_tty_priv, port);
kfifo_in(&priv->fifo, &c, 1);
}
static int kgdb_nmi_poll_one_knock(void)
{
static int n;
int c;
const char *magic = kgdb_nmi_magic;
size_t m = strlen(magic);
bool printch = false;
c = dbg_io_ops->read_char();
if (c == NO_POLL_CHAR)
return c;
if (!kgdb_nmi_knock && (c == '\r' || c == '\n')) {
return 1;
} else if (c == magic[n]) {
n = (n + 1) % m;
if (!n)
return 1;
printch = true;
} else {
n = 0;
}
if (atomic_read(&kgdb_nmi_num_readers)) {
kgdb_tty_recv(c);
return 0;
}
if (printch) {
kdb_printf("%c", c);
return 0;
}
kdb_printf("\r%s %s to enter the debugger> %*s",
kgdb_nmi_knock ? "Type" : "Hit",
kgdb_nmi_knock ? magic : "<return>", (int)m, "");
while (m--)
kdb_printf("\b");
return 0;
}
/**
* kgdb_nmi_poll_knock - Check if it is time to enter the debugger
*
* "Serial ports are often noisy, especially when muxed over another port (we
* often use serial over the headset connector). Noise on the async command
* line just causes characters that are ignored, on a command line that blocked
* execution noise would be catastrophic." -- Colin Cross
*
* So, this function implements KGDB/KDB knocking on the serial line: we won't
* enter the debugger until we receive a known magic phrase (which is actually
* "$3#33", known as "escape to KDB" command. There is also a relaxed variant
* of knocking, i.e. just pressing the return key is enough to enter the
* debugger. And if knocking is disabled, the function always returns 1.
*/
bool kgdb_nmi_poll_knock(void)
{
if (kgdb_nmi_knock < 0)
return true;
while (1) {
int ret;
ret = kgdb_nmi_poll_one_knock();
if (ret == NO_POLL_CHAR)
return false;
else if (ret == 1)
break;
}
return true;
}
/*
* The tasklet is cheap, it does not cause wakeups when reschedules itself,
* instead it waits for the next tick.
*/
static void kgdb_nmi_tty_receiver(struct timer_list *t)
{
struct kgdb_nmi_tty_priv *priv = from_timer(priv, t, timer);
char ch;
priv->timer.expires = jiffies + (HZ/100);
add_timer(&priv->timer);
if (likely(!atomic_read(&kgdb_nmi_num_readers) ||
!kfifo_len(&priv->fifo)))
return;
while (kfifo_out(&priv->fifo, &ch, 1))
tty_insert_flip_char(&priv->port, ch, TTY_NORMAL);
tty_flip_buffer_push(&priv->port);
}
static int kgdb_nmi_tty_activate(struct tty_port *port, struct tty_struct *tty)
{
struct kgdb_nmi_tty_priv *priv =
container_of(port, struct kgdb_nmi_tty_priv, port);
kgdb_nmi_port = port;
priv->timer.expires = jiffies + (HZ/100);
add_timer(&priv->timer);
return 0;
}
static void kgdb_nmi_tty_shutdown(struct tty_port *port)
{
struct kgdb_nmi_tty_priv *priv =
container_of(port, struct kgdb_nmi_tty_priv, port);
del_timer(&priv->timer);
kgdb_nmi_port = NULL;
}
static const struct tty_port_operations kgdb_nmi_tty_port_ops = {
.activate = kgdb_nmi_tty_activate,
.shutdown = kgdb_nmi_tty_shutdown,
};
static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty)
{
struct kgdb_nmi_tty_priv *priv;
int ret;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
INIT_KFIFO(priv->fifo);
timer_setup(&priv->timer, kgdb_nmi_tty_receiver, 0);
tty_port_init(&priv->port);
priv->port.ops = &kgdb_nmi_tty_port_ops;
tty->driver_data = priv;
ret = tty_port_install(&priv->port, drv, tty);
if (ret) {
pr_err("%s: can't install tty port: %d\n", __func__, ret);
goto err;
}
return 0;
err:
tty_port_destroy(&priv->port);
kfree(priv);
return ret;
}
static void kgdb_nmi_tty_cleanup(struct tty_struct *tty)
{
struct kgdb_nmi_tty_priv *priv = tty->driver_data;
tty->driver_data = NULL;
tty_port_destroy(&priv->port);
kfree(priv);
}
static int kgdb_nmi_tty_open(struct tty_struct *tty, struct file *file)
{
struct kgdb_nmi_tty_priv *priv = tty->driver_data;
unsigned int mode = file->f_flags & O_ACCMODE;
int ret;
ret = tty_port_open(&priv->port, tty, file);
if (!ret && (mode == O_RDONLY || mode == O_RDWR))
atomic_inc(&kgdb_nmi_num_readers);
return ret;
}
static void kgdb_nmi_tty_close(struct tty_struct *tty, struct file *file)
{
struct kgdb_nmi_tty_priv *priv = tty->driver_data;
unsigned int mode = file->f_flags & O_ACCMODE;
if (mode == O_RDONLY || mode == O_RDWR)
atomic_dec(&kgdb_nmi_num_readers);
tty_port_close(&priv->port, tty, file);
}
static void kgdb_nmi_tty_hangup(struct tty_struct *tty)
{
struct kgdb_nmi_tty_priv *priv = tty->driver_data;
tty_port_hangup(&priv->port);
}
static unsigned int kgdb_nmi_tty_write_room(struct tty_struct *tty)
{
/* Actually, we can handle any amount as we use polled writes. */
return 2048;
}
static ssize_t kgdb_nmi_tty_write(struct tty_struct *tty, const u8 *buf,
size_t c)
{
int i;
for (i = 0; i < c; i++)
dbg_io_ops->write_char(buf[i]);
return c;
}
static const struct tty_operations kgdb_nmi_tty_ops = {
.open = kgdb_nmi_tty_open,
.close = kgdb_nmi_tty_close,
.install = kgdb_nmi_tty_install,
.cleanup = kgdb_nmi_tty_cleanup,
.hangup = kgdb_nmi_tty_hangup,
.write_room = kgdb_nmi_tty_write_room,
.write = kgdb_nmi_tty_write,
};
int kgdb_register_nmi_console(void)
{
int ret;
if (!arch_kgdb_ops.enable_nmi)
return 0;
kgdb_nmi_tty_driver = tty_alloc_driver(1, TTY_DRIVER_REAL_RAW);
if (IS_ERR(kgdb_nmi_tty_driver)) {
pr_err("%s: cannot allocate tty\n", __func__);
return PTR_ERR(kgdb_nmi_tty_driver);
}
kgdb_nmi_tty_driver->driver_name = "ttyNMI";
kgdb_nmi_tty_driver->name = "ttyNMI";
kgdb_nmi_tty_driver->num = 1;
kgdb_nmi_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
kgdb_nmi_tty_driver->subtype = SERIAL_TYPE_NORMAL;
kgdb_nmi_tty_driver->init_termios = tty_std_termios;
tty_termios_encode_baud_rate(&kgdb_nmi_tty_driver->init_termios,
KGDB_NMI_BAUD, KGDB_NMI_BAUD);
tty_set_operations(kgdb_nmi_tty_driver, &kgdb_nmi_tty_ops);
ret = tty_register_driver(kgdb_nmi_tty_driver);
if (ret) {
pr_err("%s: can't register tty driver: %d\n", __func__, ret);
goto err_drv_reg;
}
register_console(&kgdb_nmi_console);
return 0;
err_drv_reg:
tty_driver_kref_put(kgdb_nmi_tty_driver);
return ret;
}
EXPORT_SYMBOL_GPL(kgdb_register_nmi_console);
int kgdb_unregister_nmi_console(void)
{
int ret;
if (!arch_kgdb_ops.enable_nmi)
return 0;
arch_kgdb_ops.enable_nmi(0);
ret = unregister_console(&kgdb_nmi_console);
if (ret)
return ret;
tty_unregister_driver(kgdb_nmi_tty_driver);
tty_driver_kref_put(kgdb_nmi_tty_driver);
return 0;
}
EXPORT_SYMBOL_GPL(kgdb_unregister_nmi_console);