| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * f_eem.c -- USB CDC Ethernet (EEM) link function driver |
| * |
| * Copyright (C) 2003-2005,2008 David Brownell |
| * Copyright (C) 2008 Nokia Corporation |
| * Copyright (C) 2009 EF Johnson Technologies |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/etherdevice.h> |
| #include <linux/crc32.h> |
| #include <linux/slab.h> |
| |
| #include "u_ether.h" |
| #include "u_ether_configfs.h" |
| #include "u_eem.h" |
| |
| #define EEM_HLEN 2 |
| |
| /* |
| * This function is a "CDC Ethernet Emulation Model" (CDC EEM) |
| * Ethernet link. |
| */ |
| |
| struct f_eem { |
| struct gether port; |
| u8 ctrl_id; |
| }; |
| |
| struct in_context { |
| struct sk_buff *skb; |
| struct usb_ep *ep; |
| }; |
| |
| static inline struct f_eem *func_to_eem(struct usb_function *f) |
| { |
| return container_of(f, struct f_eem, port.func); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* interface descriptor: */ |
| |
| static struct usb_interface_descriptor eem_intf = { |
| .bLength = sizeof eem_intf, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| /* .bInterfaceNumber = DYNAMIC */ |
| .bNumEndpoints = 2, |
| .bInterfaceClass = USB_CLASS_COMM, |
| .bInterfaceSubClass = USB_CDC_SUBCLASS_EEM, |
| .bInterfaceProtocol = USB_CDC_PROTO_EEM, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| /* full speed support: */ |
| |
| static struct usb_endpoint_descriptor eem_fs_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor eem_fs_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_descriptor_header *eem_fs_function[] = { |
| /* CDC EEM control descriptors */ |
| (struct usb_descriptor_header *) &eem_intf, |
| (struct usb_descriptor_header *) &eem_fs_in_desc, |
| (struct usb_descriptor_header *) &eem_fs_out_desc, |
| NULL, |
| }; |
| |
| /* high speed support: */ |
| |
| static struct usb_endpoint_descriptor eem_hs_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor eem_hs_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_descriptor_header *eem_hs_function[] = { |
| /* CDC EEM control descriptors */ |
| (struct usb_descriptor_header *) &eem_intf, |
| (struct usb_descriptor_header *) &eem_hs_in_desc, |
| (struct usb_descriptor_header *) &eem_hs_out_desc, |
| NULL, |
| }; |
| |
| /* super speed support: */ |
| |
| static struct usb_endpoint_descriptor eem_ss_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_endpoint_descriptor eem_ss_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_ss_ep_comp_descriptor eem_ss_bulk_comp_desc = { |
| .bLength = sizeof eem_ss_bulk_comp_desc, |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| |
| /* the following 2 values can be tweaked if necessary */ |
| /* .bMaxBurst = 0, */ |
| /* .bmAttributes = 0, */ |
| }; |
| |
| static struct usb_descriptor_header *eem_ss_function[] = { |
| /* CDC EEM control descriptors */ |
| (struct usb_descriptor_header *) &eem_intf, |
| (struct usb_descriptor_header *) &eem_ss_in_desc, |
| (struct usb_descriptor_header *) &eem_ss_bulk_comp_desc, |
| (struct usb_descriptor_header *) &eem_ss_out_desc, |
| (struct usb_descriptor_header *) &eem_ss_bulk_comp_desc, |
| NULL, |
| }; |
| |
| /* string descriptors: */ |
| |
| static struct usb_string eem_string_defs[] = { |
| [0].s = "CDC Ethernet Emulation Model (EEM)", |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings eem_string_table = { |
| .language = 0x0409, /* en-us */ |
| .strings = eem_string_defs, |
| }; |
| |
| static struct usb_gadget_strings *eem_strings[] = { |
| &eem_string_table, |
| NULL, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) |
| { |
| struct usb_composite_dev *cdev = f->config->cdev; |
| u16 w_index = le16_to_cpu(ctrl->wIndex); |
| u16 w_value = le16_to_cpu(ctrl->wValue); |
| u16 w_length = le16_to_cpu(ctrl->wLength); |
| |
| DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| |
| /* device either stalls (value < 0) or reports success */ |
| return -EOPNOTSUPP; |
| } |
| |
| |
| static int eem_set_alt(struct usb_function *f, unsigned intf, unsigned alt) |
| { |
| struct f_eem *eem = func_to_eem(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| struct net_device *net; |
| |
| /* we know alt == 0, so this is an activation or a reset */ |
| if (alt != 0) |
| goto fail; |
| |
| if (intf == eem->ctrl_id) { |
| DBG(cdev, "reset eem\n"); |
| gether_disconnect(&eem->port); |
| |
| if (!eem->port.in_ep->desc || !eem->port.out_ep->desc) { |
| DBG(cdev, "init eem\n"); |
| if (config_ep_by_speed(cdev->gadget, f, |
| eem->port.in_ep) || |
| config_ep_by_speed(cdev->gadget, f, |
| eem->port.out_ep)) { |
| eem->port.in_ep->desc = NULL; |
| eem->port.out_ep->desc = NULL; |
| goto fail; |
| } |
| } |
| |
| /* zlps should not occur because zero-length EEM packets |
| * will be inserted in those cases where they would occur |
| */ |
| eem->port.is_zlp_ok = 1; |
| eem->port.cdc_filter = DEFAULT_FILTER; |
| DBG(cdev, "activate eem\n"); |
| net = gether_connect(&eem->port); |
| if (IS_ERR(net)) |
| return PTR_ERR(net); |
| } else |
| goto fail; |
| |
| return 0; |
| fail: |
| return -EINVAL; |
| } |
| |
| static void eem_disable(struct usb_function *f) |
| { |
| struct f_eem *eem = func_to_eem(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| DBG(cdev, "eem deactivated\n"); |
| |
| if (eem->port.in_ep->enabled) |
| gether_disconnect(&eem->port); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* EEM function driver setup/binding */ |
| |
| static int eem_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct usb_composite_dev *cdev = c->cdev; |
| struct f_eem *eem = func_to_eem(f); |
| struct usb_string *us; |
| int status; |
| struct usb_ep *ep; |
| |
| struct f_eem_opts *eem_opts; |
| |
| eem_opts = container_of(f->fi, struct f_eem_opts, func_inst); |
| /* |
| * in drivers/usb/gadget/configfs.c:configfs_composite_bind() |
| * configurations are bound in sequence with list_for_each_entry, |
| * in each configuration its functions are bound in sequence |
| * with list_for_each_entry, so we assume no race condition |
| * with regard to eem_opts->bound access |
| */ |
| if (!eem_opts->bound) { |
| mutex_lock(&eem_opts->lock); |
| gether_set_gadget(eem_opts->net, cdev->gadget); |
| status = gether_register_netdev(eem_opts->net); |
| mutex_unlock(&eem_opts->lock); |
| if (status) |
| return status; |
| eem_opts->bound = true; |
| } |
| |
| us = usb_gstrings_attach(cdev, eem_strings, |
| ARRAY_SIZE(eem_string_defs)); |
| if (IS_ERR(us)) |
| return PTR_ERR(us); |
| eem_intf.iInterface = us[0].id; |
| |
| /* allocate instance-specific interface IDs */ |
| status = usb_interface_id(c, f); |
| if (status < 0) |
| goto fail; |
| eem->ctrl_id = status; |
| eem_intf.bInterfaceNumber = status; |
| |
| status = -ENODEV; |
| |
| /* allocate instance-specific endpoints */ |
| ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_in_desc); |
| if (!ep) |
| goto fail; |
| eem->port.in_ep = ep; |
| |
| ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_out_desc); |
| if (!ep) |
| goto fail; |
| eem->port.out_ep = ep; |
| |
| /* support all relevant hardware speeds... we expect that when |
| * hardware is dual speed, all bulk-capable endpoints work at |
| * both speeds |
| */ |
| eem_hs_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress; |
| eem_hs_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress; |
| |
| eem_ss_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress; |
| eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress; |
| |
| status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function, |
| eem_ss_function, eem_ss_function); |
| if (status) |
| goto fail; |
| |
| DBG(cdev, "CDC Ethernet (EEM): IN/%s OUT/%s\n", |
| eem->port.in_ep->name, eem->port.out_ep->name); |
| return 0; |
| |
| fail: |
| ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); |
| |
| return status; |
| } |
| |
| static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct in_context *ctx = req->context; |
| |
| dev_kfree_skb_any(ctx->skb); |
| kfree(req->buf); |
| usb_ep_free_request(ctx->ep, req); |
| kfree(ctx); |
| } |
| |
| /* |
| * Add the EEM header and ethernet checksum. |
| * We currently do not attempt to put multiple ethernet frames |
| * into a single USB transfer |
| */ |
| static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb) |
| { |
| struct sk_buff *skb2 = NULL; |
| struct usb_ep *in = port->in_ep; |
| int headroom, tailroom, padlen = 0; |
| u16 len; |
| |
| if (!skb) |
| return NULL; |
| |
| len = skb->len; |
| headroom = skb_headroom(skb); |
| tailroom = skb_tailroom(skb); |
| |
| /* When (len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) is 0, |
| * stick two bytes of zero-length EEM packet on the end. |
| */ |
| if (((len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) == 0) |
| padlen += 2; |
| |
| if ((tailroom >= (ETH_FCS_LEN + padlen)) && |
| (headroom >= EEM_HLEN) && !skb_cloned(skb)) |
| goto done; |
| |
| skb2 = skb_copy_expand(skb, EEM_HLEN, ETH_FCS_LEN + padlen, GFP_ATOMIC); |
| dev_kfree_skb_any(skb); |
| skb = skb2; |
| if (!skb) |
| return skb; |
| |
| done: |
| /* use the "no CRC" option */ |
| put_unaligned_be32(0xdeadbeef, skb_put(skb, 4)); |
| |
| /* EEM packet header format: |
| * b0..13: length of ethernet frame |
| * b14: bmCRC (0 == sentinel CRC) |
| * b15: bmType (0 == data) |
| */ |
| len = skb->len; |
| put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2)); |
| |
| /* add a zero-length EEM packet, if needed */ |
| if (padlen) |
| put_unaligned_le16(0, skb_put(skb, 2)); |
| |
| return skb; |
| } |
| |
| /* |
| * Remove the EEM header. Note that there can be many EEM packets in a single |
| * USB transfer, so we need to break them out and handle them independently. |
| */ |
| static int eem_unwrap(struct gether *port, |
| struct sk_buff *skb, |
| struct sk_buff_head *list) |
| { |
| struct usb_composite_dev *cdev = port->func.config->cdev; |
| int status = 0; |
| |
| do { |
| struct sk_buff *skb2; |
| u16 header; |
| u16 len = 0; |
| |
| if (skb->len < EEM_HLEN) { |
| status = -EINVAL; |
| DBG(cdev, "invalid EEM header\n"); |
| goto error; |
| } |
| |
| /* remove the EEM header */ |
| header = get_unaligned_le16(skb->data); |
| skb_pull(skb, EEM_HLEN); |
| |
| /* EEM packet header format: |
| * b0..14: EEM type dependent (data or command) |
| * b15: bmType (0 == data, 1 == command) |
| */ |
| if (header & BIT(15)) { |
| struct usb_request *req; |
| struct in_context *ctx; |
| struct usb_ep *ep; |
| u16 bmEEMCmd; |
| |
| /* EEM command packet format: |
| * b0..10: bmEEMCmdParam |
| * b11..13: bmEEMCmd |
| * b14: reserved (must be zero) |
| * b15: bmType (1 == command) |
| */ |
| if (header & BIT(14)) |
| continue; |
| |
| bmEEMCmd = (header >> 11) & 0x7; |
| switch (bmEEMCmd) { |
| case 0: /* echo */ |
| len = header & 0x7FF; |
| if (skb->len < len) { |
| status = -EOVERFLOW; |
| goto error; |
| } |
| |
| skb2 = skb_clone(skb, GFP_ATOMIC); |
| if (unlikely(!skb2)) { |
| DBG(cdev, "EEM echo response error\n"); |
| goto next; |
| } |
| skb_trim(skb2, len); |
| put_unaligned_le16(BIT(15) | BIT(11) | len, |
| skb_push(skb2, 2)); |
| |
| ep = port->in_ep; |
| req = usb_ep_alloc_request(ep, GFP_ATOMIC); |
| if (!req) { |
| dev_kfree_skb_any(skb2); |
| goto next; |
| } |
| |
| req->buf = kmalloc(skb2->len, GFP_KERNEL); |
| if (!req->buf) { |
| usb_ep_free_request(ep, req); |
| dev_kfree_skb_any(skb2); |
| goto next; |
| } |
| |
| ctx = kmalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) { |
| kfree(req->buf); |
| usb_ep_free_request(ep, req); |
| dev_kfree_skb_any(skb2); |
| goto next; |
| } |
| ctx->skb = skb2; |
| ctx->ep = ep; |
| |
| skb_copy_bits(skb2, 0, req->buf, skb2->len); |
| req->length = skb2->len; |
| req->complete = eem_cmd_complete; |
| req->zero = 1; |
| req->context = ctx; |
| if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC)) |
| DBG(cdev, "echo response queue fail\n"); |
| break; |
| |
| case 1: /* echo response */ |
| case 2: /* suspend hint */ |
| case 3: /* response hint */ |
| case 4: /* response complete hint */ |
| case 5: /* tickle */ |
| default: /* reserved */ |
| continue; |
| } |
| } else { |
| u32 crc, crc2; |
| struct sk_buff *skb3; |
| |
| /* check for zero-length EEM packet */ |
| if (header == 0) |
| continue; |
| |
| /* EEM data packet format: |
| * b0..13: length of ethernet frame |
| * b14: bmCRC (0 == sentinel, 1 == calculated) |
| * b15: bmType (0 == data) |
| */ |
| len = header & 0x3FFF; |
| if ((skb->len < len) |
| || (len < (ETH_HLEN + ETH_FCS_LEN))) { |
| status = -EINVAL; |
| goto error; |
| } |
| |
| /* validate CRC */ |
| if (header & BIT(14)) { |
| crc = get_unaligned_le32(skb->data + len |
| - ETH_FCS_LEN); |
| crc2 = ~crc32_le(~0, |
| skb->data, len - ETH_FCS_LEN); |
| } else { |
| crc = get_unaligned_be32(skb->data + len |
| - ETH_FCS_LEN); |
| crc2 = 0xdeadbeef; |
| } |
| if (crc != crc2) { |
| DBG(cdev, "invalid EEM CRC\n"); |
| goto next; |
| } |
| |
| skb2 = skb_clone(skb, GFP_ATOMIC); |
| if (unlikely(!skb2)) { |
| DBG(cdev, "unable to unframe EEM packet\n"); |
| goto next; |
| } |
| skb_trim(skb2, len - ETH_FCS_LEN); |
| |
| skb3 = skb_copy_expand(skb2, |
| NET_IP_ALIGN, |
| 0, |
| GFP_ATOMIC); |
| if (unlikely(!skb3)) { |
| dev_kfree_skb_any(skb2); |
| goto next; |
| } |
| dev_kfree_skb_any(skb2); |
| skb_queue_tail(list, skb3); |
| } |
| next: |
| skb_pull(skb, len); |
| } while (skb->len); |
| |
| error: |
| dev_kfree_skb_any(skb); |
| return status; |
| } |
| |
| static inline struct f_eem_opts *to_f_eem_opts(struct config_item *item) |
| { |
| return container_of(to_config_group(item), struct f_eem_opts, |
| func_inst.group); |
| } |
| |
| /* f_eem_item_ops */ |
| USB_ETHERNET_CONFIGFS_ITEM(eem); |
| |
| /* f_eem_opts_dev_addr */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(eem); |
| |
| /* f_eem_opts_host_addr */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(eem); |
| |
| /* f_eem_opts_qmult */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(eem); |
| |
| /* f_eem_opts_ifname */ |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(eem); |
| |
| static struct configfs_attribute *eem_attrs[] = { |
| &eem_opts_attr_dev_addr, |
| &eem_opts_attr_host_addr, |
| &eem_opts_attr_qmult, |
| &eem_opts_attr_ifname, |
| NULL, |
| }; |
| |
| static const struct config_item_type eem_func_type = { |
| .ct_item_ops = &eem_item_ops, |
| .ct_attrs = eem_attrs, |
| .ct_owner = THIS_MODULE, |
| }; |
| |
| static void eem_free_inst(struct usb_function_instance *f) |
| { |
| struct f_eem_opts *opts; |
| |
| opts = container_of(f, struct f_eem_opts, func_inst); |
| if (opts->bound) |
| gether_cleanup(netdev_priv(opts->net)); |
| else |
| free_netdev(opts->net); |
| kfree(opts); |
| } |
| |
| static struct usb_function_instance *eem_alloc_inst(void) |
| { |
| struct f_eem_opts *opts; |
| |
| opts = kzalloc(sizeof(*opts), GFP_KERNEL); |
| if (!opts) |
| return ERR_PTR(-ENOMEM); |
| mutex_init(&opts->lock); |
| opts->func_inst.free_func_inst = eem_free_inst; |
| opts->net = gether_setup_default(); |
| if (IS_ERR(opts->net)) { |
| struct net_device *net = opts->net; |
| kfree(opts); |
| return ERR_CAST(net); |
| } |
| |
| config_group_init_type_name(&opts->func_inst.group, "", &eem_func_type); |
| |
| return &opts->func_inst; |
| } |
| |
| static void eem_free(struct usb_function *f) |
| { |
| struct f_eem *eem; |
| struct f_eem_opts *opts; |
| |
| eem = func_to_eem(f); |
| opts = container_of(f->fi, struct f_eem_opts, func_inst); |
| kfree(eem); |
| mutex_lock(&opts->lock); |
| opts->refcnt--; |
| mutex_unlock(&opts->lock); |
| } |
| |
| static void eem_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| DBG(c->cdev, "eem unbind\n"); |
| |
| usb_free_all_descriptors(f); |
| } |
| |
| static struct usb_function *eem_alloc(struct usb_function_instance *fi) |
| { |
| struct f_eem *eem; |
| struct f_eem_opts *opts; |
| |
| /* allocate and initialize one new instance */ |
| eem = kzalloc(sizeof(*eem), GFP_KERNEL); |
| if (!eem) |
| return ERR_PTR(-ENOMEM); |
| |
| opts = container_of(fi, struct f_eem_opts, func_inst); |
| mutex_lock(&opts->lock); |
| opts->refcnt++; |
| |
| eem->port.ioport = netdev_priv(opts->net); |
| mutex_unlock(&opts->lock); |
| eem->port.cdc_filter = DEFAULT_FILTER; |
| |
| eem->port.func.name = "cdc_eem"; |
| /* descriptors are per-instance copies */ |
| eem->port.func.bind = eem_bind; |
| eem->port.func.unbind = eem_unbind; |
| eem->port.func.set_alt = eem_set_alt; |
| eem->port.func.setup = eem_setup; |
| eem->port.func.disable = eem_disable; |
| eem->port.func.free_func = eem_free; |
| eem->port.wrap = eem_wrap; |
| eem->port.unwrap = eem_unwrap; |
| eem->port.header_len = EEM_HLEN; |
| |
| return &eem->port.func; |
| } |
| |
| DECLARE_USB_FUNCTION_INIT(eem, eem_alloc_inst, eem_alloc); |
| MODULE_DESCRIPTION("USB CDC Ethernet (EEM) link function driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("David Brownell"); |