| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * f_sourcesink.c - USB peripheral source/sink configuration driver |
| * |
| * Copyright (C) 2003-2008 David Brownell |
| * Copyright (C) 2008 by Nokia Corporation |
| */ |
| |
| /* #define VERBOSE_DEBUG */ |
| |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/usb/composite.h> |
| #include <linux/usb/func_utils.h> |
| #include <linux/err.h> |
| |
| #include "g_zero.h" |
| |
| /* |
| * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral |
| * controller drivers. |
| * |
| * This just sinks bulk packets OUT to the peripheral and sources them IN |
| * to the host, optionally with specific data patterns for integrity tests. |
| * As such it supports basic functionality and load tests. |
| * |
| * In terms of control messaging, this supports all the standard requests |
| * plus two that support control-OUT tests. If the optional "autoresume" |
| * mode is enabled, it provides good functional coverage for the "USBCV" |
| * test harness from USB-IF. |
| */ |
| struct f_sourcesink { |
| struct usb_function function; |
| |
| struct usb_ep *in_ep; |
| struct usb_ep *out_ep; |
| struct usb_ep *iso_in_ep; |
| struct usb_ep *iso_out_ep; |
| int cur_alt; |
| |
| unsigned pattern; |
| unsigned isoc_interval; |
| unsigned isoc_maxpacket; |
| unsigned isoc_mult; |
| unsigned isoc_maxburst; |
| unsigned buflen; |
| unsigned bulk_qlen; |
| unsigned iso_qlen; |
| }; |
| |
| static inline struct f_sourcesink *func_to_ss(struct usb_function *f) |
| { |
| return container_of(f, struct f_sourcesink, function); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct usb_interface_descriptor source_sink_intf_alt0 = { |
| .bLength = USB_DT_INTERFACE_SIZE, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| .bAlternateSetting = 0, |
| .bNumEndpoints = 2, |
| .bInterfaceClass = USB_CLASS_VENDOR_SPEC, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| static struct usb_interface_descriptor source_sink_intf_alt1 = { |
| .bLength = USB_DT_INTERFACE_SIZE, |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| .bAlternateSetting = 1, |
| .bNumEndpoints = 4, |
| .bInterfaceClass = USB_CLASS_VENDOR_SPEC, |
| /* .iInterface = DYNAMIC */ |
| }; |
| |
| /* full speed support: */ |
| |
| static struct usb_endpoint_descriptor fs_source_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor fs_sink_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor fs_iso_source_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_ISOC, |
| .wMaxPacketSize = cpu_to_le16(1023), |
| .bInterval = 4, |
| }; |
| |
| static struct usb_endpoint_descriptor fs_iso_sink_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_ISOC, |
| .wMaxPacketSize = cpu_to_le16(1023), |
| .bInterval = 4, |
| }; |
| |
| static struct usb_descriptor_header *fs_source_sink_descs[] = { |
| (struct usb_descriptor_header *) &source_sink_intf_alt0, |
| (struct usb_descriptor_header *) &fs_sink_desc, |
| (struct usb_descriptor_header *) &fs_source_desc, |
| (struct usb_descriptor_header *) &source_sink_intf_alt1, |
| #define FS_ALT_IFC_1_OFFSET 3 |
| (struct usb_descriptor_header *) &fs_sink_desc, |
| (struct usb_descriptor_header *) &fs_source_desc, |
| (struct usb_descriptor_header *) &fs_iso_sink_desc, |
| (struct usb_descriptor_header *) &fs_iso_source_desc, |
| NULL, |
| }; |
| |
| /* high speed support: */ |
| |
| static struct usb_endpoint_descriptor hs_source_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor hs_sink_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor hs_iso_source_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_ISOC, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| .bInterval = 4, |
| }; |
| |
| static struct usb_endpoint_descriptor hs_iso_sink_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_ISOC, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| .bInterval = 4, |
| }; |
| |
| static struct usb_descriptor_header *hs_source_sink_descs[] = { |
| (struct usb_descriptor_header *) &source_sink_intf_alt0, |
| (struct usb_descriptor_header *) &hs_source_desc, |
| (struct usb_descriptor_header *) &hs_sink_desc, |
| (struct usb_descriptor_header *) &source_sink_intf_alt1, |
| #define HS_ALT_IFC_1_OFFSET 3 |
| (struct usb_descriptor_header *) &hs_source_desc, |
| (struct usb_descriptor_header *) &hs_sink_desc, |
| (struct usb_descriptor_header *) &hs_iso_source_desc, |
| (struct usb_descriptor_header *) &hs_iso_sink_desc, |
| NULL, |
| }; |
| |
| /* super speed support: */ |
| |
| static struct usb_endpoint_descriptor ss_source_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_ss_ep_comp_descriptor ss_source_comp_desc = { |
| .bLength = USB_DT_SS_EP_COMP_SIZE, |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| |
| .bMaxBurst = 0, |
| .bmAttributes = 0, |
| .wBytesPerInterval = 0, |
| }; |
| |
| static struct usb_endpoint_descriptor ss_sink_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = { |
| .bLength = USB_DT_SS_EP_COMP_SIZE, |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| |
| .bMaxBurst = 0, |
| .bmAttributes = 0, |
| .wBytesPerInterval = 0, |
| }; |
| |
| static struct usb_endpoint_descriptor ss_iso_source_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_ISOC, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| .bInterval = 4, |
| }; |
| |
| static struct usb_ss_ep_comp_descriptor ss_iso_source_comp_desc = { |
| .bLength = USB_DT_SS_EP_COMP_SIZE, |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| |
| .bMaxBurst = 0, |
| .bmAttributes = 0, |
| .wBytesPerInterval = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_endpoint_descriptor ss_iso_sink_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bmAttributes = USB_ENDPOINT_XFER_ISOC, |
| .wMaxPacketSize = cpu_to_le16(1024), |
| .bInterval = 4, |
| }; |
| |
| static struct usb_ss_ep_comp_descriptor ss_iso_sink_comp_desc = { |
| .bLength = USB_DT_SS_EP_COMP_SIZE, |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, |
| |
| .bMaxBurst = 0, |
| .bmAttributes = 0, |
| .wBytesPerInterval = cpu_to_le16(1024), |
| }; |
| |
| static struct usb_descriptor_header *ss_source_sink_descs[] = { |
| (struct usb_descriptor_header *) &source_sink_intf_alt0, |
| (struct usb_descriptor_header *) &ss_source_desc, |
| (struct usb_descriptor_header *) &ss_source_comp_desc, |
| (struct usb_descriptor_header *) &ss_sink_desc, |
| (struct usb_descriptor_header *) &ss_sink_comp_desc, |
| (struct usb_descriptor_header *) &source_sink_intf_alt1, |
| #define SS_ALT_IFC_1_OFFSET 5 |
| (struct usb_descriptor_header *) &ss_source_desc, |
| (struct usb_descriptor_header *) &ss_source_comp_desc, |
| (struct usb_descriptor_header *) &ss_sink_desc, |
| (struct usb_descriptor_header *) &ss_sink_comp_desc, |
| (struct usb_descriptor_header *) &ss_iso_source_desc, |
| (struct usb_descriptor_header *) &ss_iso_source_comp_desc, |
| (struct usb_descriptor_header *) &ss_iso_sink_desc, |
| (struct usb_descriptor_header *) &ss_iso_sink_comp_desc, |
| NULL, |
| }; |
| |
| /* function-specific strings: */ |
| |
| static struct usb_string strings_sourcesink[] = { |
| [0].s = "source and sink data", |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings stringtab_sourcesink = { |
| .language = 0x0409, /* en-us */ |
| .strings = strings_sourcesink, |
| }; |
| |
| static struct usb_gadget_strings *sourcesink_strings[] = { |
| &stringtab_sourcesink, |
| NULL, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline struct usb_request *ss_alloc_ep_req(struct usb_ep *ep, int len) |
| { |
| return alloc_ep_req(ep, len); |
| } |
| |
| static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep) |
| { |
| int value; |
| |
| value = usb_ep_disable(ep); |
| if (value < 0) |
| DBG(cdev, "disable %s --> %d\n", ep->name, value); |
| } |
| |
| void disable_endpoints(struct usb_composite_dev *cdev, |
| struct usb_ep *in, struct usb_ep *out, |
| struct usb_ep *iso_in, struct usb_ep *iso_out) |
| { |
| disable_ep(cdev, in); |
| disable_ep(cdev, out); |
| if (iso_in) |
| disable_ep(cdev, iso_in); |
| if (iso_out) |
| disable_ep(cdev, iso_out); |
| } |
| |
| static int |
| sourcesink_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct usb_composite_dev *cdev = c->cdev; |
| struct f_sourcesink *ss = func_to_ss(f); |
| int id; |
| int ret; |
| |
| /* allocate interface ID(s) */ |
| id = usb_interface_id(c, f); |
| if (id < 0) |
| return id; |
| source_sink_intf_alt0.bInterfaceNumber = id; |
| source_sink_intf_alt1.bInterfaceNumber = id; |
| |
| /* allocate bulk endpoints */ |
| ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc); |
| if (!ss->in_ep) { |
| autoconf_fail: |
| ERROR(cdev, "%s: can't autoconfigure on %s\n", |
| f->name, cdev->gadget->name); |
| return -ENODEV; |
| } |
| |
| ss->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_sink_desc); |
| if (!ss->out_ep) |
| goto autoconf_fail; |
| |
| /* sanity check the isoc module parameters */ |
| if (ss->isoc_interval < 1) |
| ss->isoc_interval = 1; |
| if (ss->isoc_interval > 16) |
| ss->isoc_interval = 16; |
| if (ss->isoc_mult > 2) |
| ss->isoc_mult = 2; |
| if (ss->isoc_maxburst > 15) |
| ss->isoc_maxburst = 15; |
| |
| /* fill in the FS isoc descriptors from the module parameters */ |
| fs_iso_source_desc.wMaxPacketSize = ss->isoc_maxpacket > 1023 ? |
| 1023 : ss->isoc_maxpacket; |
| fs_iso_source_desc.bInterval = ss->isoc_interval; |
| fs_iso_sink_desc.wMaxPacketSize = ss->isoc_maxpacket > 1023 ? |
| 1023 : ss->isoc_maxpacket; |
| fs_iso_sink_desc.bInterval = ss->isoc_interval; |
| |
| /* allocate iso endpoints */ |
| ss->iso_in_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_source_desc); |
| if (!ss->iso_in_ep) |
| goto no_iso; |
| |
| ss->iso_out_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_sink_desc); |
| if (!ss->iso_out_ep) { |
| usb_ep_autoconfig_release(ss->iso_in_ep); |
| ss->iso_in_ep = NULL; |
| no_iso: |
| /* |
| * We still want to work even if the UDC doesn't have isoc |
| * endpoints, so null out the alt interface that contains |
| * them and continue. |
| */ |
| fs_source_sink_descs[FS_ALT_IFC_1_OFFSET] = NULL; |
| hs_source_sink_descs[HS_ALT_IFC_1_OFFSET] = NULL; |
| ss_source_sink_descs[SS_ALT_IFC_1_OFFSET] = NULL; |
| } |
| |
| if (ss->isoc_maxpacket > 1024) |
| ss->isoc_maxpacket = 1024; |
| |
| /* support high speed hardware */ |
| hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; |
| hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; |
| |
| /* |
| * Fill in the HS isoc descriptors from the module parameters. |
| * We assume that the user knows what they are doing and won't |
| * give parameters that their UDC doesn't support. |
| */ |
| hs_iso_source_desc.wMaxPacketSize = ss->isoc_maxpacket; |
| hs_iso_source_desc.wMaxPacketSize |= ss->isoc_mult << 11; |
| hs_iso_source_desc.bInterval = ss->isoc_interval; |
| hs_iso_source_desc.bEndpointAddress = |
| fs_iso_source_desc.bEndpointAddress; |
| |
| hs_iso_sink_desc.wMaxPacketSize = ss->isoc_maxpacket; |
| hs_iso_sink_desc.wMaxPacketSize |= ss->isoc_mult << 11; |
| hs_iso_sink_desc.bInterval = ss->isoc_interval; |
| hs_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress; |
| |
| /* support super speed hardware */ |
| ss_source_desc.bEndpointAddress = |
| fs_source_desc.bEndpointAddress; |
| ss_sink_desc.bEndpointAddress = |
| fs_sink_desc.bEndpointAddress; |
| |
| /* |
| * Fill in the SS isoc descriptors from the module parameters. |
| * We assume that the user knows what they are doing and won't |
| * give parameters that their UDC doesn't support. |
| */ |
| ss_iso_source_desc.wMaxPacketSize = ss->isoc_maxpacket; |
| ss_iso_source_desc.bInterval = ss->isoc_interval; |
| ss_iso_source_comp_desc.bmAttributes = ss->isoc_mult; |
| ss_iso_source_comp_desc.bMaxBurst = ss->isoc_maxburst; |
| ss_iso_source_comp_desc.wBytesPerInterval = ss->isoc_maxpacket * |
| (ss->isoc_mult + 1) * (ss->isoc_maxburst + 1); |
| ss_iso_source_desc.bEndpointAddress = |
| fs_iso_source_desc.bEndpointAddress; |
| |
| ss_iso_sink_desc.wMaxPacketSize = ss->isoc_maxpacket; |
| ss_iso_sink_desc.bInterval = ss->isoc_interval; |
| ss_iso_sink_comp_desc.bmAttributes = ss->isoc_mult; |
| ss_iso_sink_comp_desc.bMaxBurst = ss->isoc_maxburst; |
| ss_iso_sink_comp_desc.wBytesPerInterval = ss->isoc_maxpacket * |
| (ss->isoc_mult + 1) * (ss->isoc_maxburst + 1); |
| ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress; |
| |
| ret = usb_assign_descriptors(f, fs_source_sink_descs, |
| hs_source_sink_descs, ss_source_sink_descs, |
| ss_source_sink_descs); |
| if (ret) |
| return ret; |
| |
| DBG(cdev, "%s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n", |
| f->name, ss->in_ep->name, ss->out_ep->name, |
| ss->iso_in_ep ? ss->iso_in_ep->name : "<none>", |
| ss->iso_out_ep ? ss->iso_out_ep->name : "<none>"); |
| return 0; |
| } |
| |
| static void |
| sourcesink_free_func(struct usb_function *f) |
| { |
| struct f_ss_opts *opts; |
| |
| opts = container_of(f->fi, struct f_ss_opts, func_inst); |
| |
| mutex_lock(&opts->lock); |
| opts->refcnt--; |
| mutex_unlock(&opts->lock); |
| |
| usb_free_all_descriptors(f); |
| kfree(func_to_ss(f)); |
| } |
| |
| /* optionally require specific source/sink data patterns */ |
| static int check_read_data(struct f_sourcesink *ss, struct usb_request *req) |
| { |
| unsigned i; |
| u8 *buf = req->buf; |
| struct usb_composite_dev *cdev = ss->function.config->cdev; |
| int max_packet_size = le16_to_cpu(ss->out_ep->desc->wMaxPacketSize); |
| |
| if (ss->pattern == 2) |
| return 0; |
| |
| for (i = 0; i < req->actual; i++, buf++) { |
| switch (ss->pattern) { |
| |
| /* all-zeroes has no synchronization issues */ |
| case 0: |
| if (*buf == 0) |
| continue; |
| break; |
| |
| /* "mod63" stays in sync with short-terminated transfers, |
| * OR otherwise when host and gadget agree on how large |
| * each usb transfer request should be. Resync is done |
| * with set_interface or set_config. (We *WANT* it to |
| * get quickly out of sync if controllers or their drivers |
| * stutter for any reason, including buffer duplication...) |
| */ |
| case 1: |
| if (*buf == (u8)((i % max_packet_size) % 63)) |
| continue; |
| break; |
| } |
| ERROR(cdev, "bad OUT byte, buf[%d] = %d\n", i, *buf); |
| usb_ep_set_halt(ss->out_ep); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void reinit_write_data(struct usb_ep *ep, struct usb_request *req) |
| { |
| unsigned i; |
| u8 *buf = req->buf; |
| int max_packet_size = le16_to_cpu(ep->desc->wMaxPacketSize); |
| struct f_sourcesink *ss = ep->driver_data; |
| |
| switch (ss->pattern) { |
| case 0: |
| memset(req->buf, 0, req->length); |
| break; |
| case 1: |
| for (i = 0; i < req->length; i++) |
| *buf++ = (u8) ((i % max_packet_size) % 63); |
| break; |
| case 2: |
| break; |
| } |
| } |
| |
| static void source_sink_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct usb_composite_dev *cdev; |
| struct f_sourcesink *ss = ep->driver_data; |
| int status = req->status; |
| |
| /* driver_data will be null if ep has been disabled */ |
| if (!ss) |
| return; |
| |
| cdev = ss->function.config->cdev; |
| |
| switch (status) { |
| |
| case 0: /* normal completion? */ |
| if (ep == ss->out_ep) { |
| check_read_data(ss, req); |
| if (ss->pattern != 2) |
| memset(req->buf, 0x55, req->length); |
| } |
| break; |
| |
| /* this endpoint is normally active while we're configured */ |
| case -ECONNABORTED: /* hardware forced ep reset */ |
| case -ECONNRESET: /* request dequeued */ |
| case -ESHUTDOWN: /* disconnect from host */ |
| VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status, |
| req->actual, req->length); |
| if (ep == ss->out_ep) |
| check_read_data(ss, req); |
| free_ep_req(ep, req); |
| return; |
| |
| case -EOVERFLOW: /* buffer overrun on read means that |
| * we didn't provide a big enough |
| * buffer. |
| */ |
| default: |
| #if 1 |
| DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name, |
| status, req->actual, req->length); |
| break; |
| #endif |
| case -EREMOTEIO: /* short read */ |
| break; |
| } |
| |
| status = usb_ep_queue(ep, req, GFP_ATOMIC); |
| if (status) { |
| ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n", |
| ep->name, req->length, status); |
| usb_ep_set_halt(ep); |
| /* FIXME recover later ... somehow */ |
| } |
| } |
| |
| static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in, |
| bool is_iso, int speed) |
| { |
| struct usb_ep *ep; |
| struct usb_request *req; |
| int i, size, qlen, status = 0; |
| |
| if (is_iso) { |
| switch (speed) { |
| case USB_SPEED_SUPER_PLUS: |
| case USB_SPEED_SUPER: |
| size = ss->isoc_maxpacket * |
| (ss->isoc_mult + 1) * |
| (ss->isoc_maxburst + 1); |
| break; |
| case USB_SPEED_HIGH: |
| size = ss->isoc_maxpacket * (ss->isoc_mult + 1); |
| break; |
| default: |
| size = ss->isoc_maxpacket > 1023 ? |
| 1023 : ss->isoc_maxpacket; |
| break; |
| } |
| ep = is_in ? ss->iso_in_ep : ss->iso_out_ep; |
| qlen = ss->iso_qlen; |
| } else { |
| ep = is_in ? ss->in_ep : ss->out_ep; |
| qlen = ss->bulk_qlen; |
| size = ss->buflen; |
| } |
| |
| for (i = 0; i < qlen; i++) { |
| req = ss_alloc_ep_req(ep, size); |
| if (!req) |
| return -ENOMEM; |
| |
| req->complete = source_sink_complete; |
| if (is_in) |
| reinit_write_data(ep, req); |
| else if (ss->pattern != 2) |
| memset(req->buf, 0x55, req->length); |
| |
| status = usb_ep_queue(ep, req, GFP_ATOMIC); |
| if (status) { |
| struct usb_composite_dev *cdev; |
| |
| cdev = ss->function.config->cdev; |
| ERROR(cdev, "start %s%s %s --> %d\n", |
| is_iso ? "ISO-" : "", is_in ? "IN" : "OUT", |
| ep->name, status); |
| free_ep_req(ep, req); |
| return status; |
| } |
| } |
| |
| return status; |
| } |
| |
| static void disable_source_sink(struct f_sourcesink *ss) |
| { |
| struct usb_composite_dev *cdev; |
| |
| cdev = ss->function.config->cdev; |
| disable_endpoints(cdev, ss->in_ep, ss->out_ep, ss->iso_in_ep, |
| ss->iso_out_ep); |
| VDBG(cdev, "%s disabled\n", ss->function.name); |
| } |
| |
| static int |
| enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss, |
| int alt) |
| { |
| int result = 0; |
| int speed = cdev->gadget->speed; |
| struct usb_ep *ep; |
| |
| /* one bulk endpoint writes (sources) zeroes IN (to the host) */ |
| ep = ss->in_ep; |
| result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); |
| if (result) |
| return result; |
| result = usb_ep_enable(ep); |
| if (result < 0) |
| return result; |
| ep->driver_data = ss; |
| |
| result = source_sink_start_ep(ss, true, false, speed); |
| if (result < 0) { |
| fail: |
| ep = ss->in_ep; |
| usb_ep_disable(ep); |
| return result; |
| } |
| |
| /* one bulk endpoint reads (sinks) anything OUT (from the host) */ |
| ep = ss->out_ep; |
| result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); |
| if (result) |
| goto fail; |
| result = usb_ep_enable(ep); |
| if (result < 0) |
| goto fail; |
| ep->driver_data = ss; |
| |
| result = source_sink_start_ep(ss, false, false, speed); |
| if (result < 0) { |
| fail2: |
| ep = ss->out_ep; |
| usb_ep_disable(ep); |
| goto fail; |
| } |
| |
| if (alt == 0) |
| goto out; |
| |
| /* one iso endpoint writes (sources) zeroes IN (to the host) */ |
| ep = ss->iso_in_ep; |
| if (ep) { |
| result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); |
| if (result) |
| goto fail2; |
| result = usb_ep_enable(ep); |
| if (result < 0) |
| goto fail2; |
| ep->driver_data = ss; |
| |
| result = source_sink_start_ep(ss, true, true, speed); |
| if (result < 0) { |
| fail3: |
| ep = ss->iso_in_ep; |
| if (ep) |
| usb_ep_disable(ep); |
| goto fail2; |
| } |
| } |
| |
| /* one iso endpoint reads (sinks) anything OUT (from the host) */ |
| ep = ss->iso_out_ep; |
| if (ep) { |
| result = config_ep_by_speed(cdev->gadget, &(ss->function), ep); |
| if (result) |
| goto fail3; |
| result = usb_ep_enable(ep); |
| if (result < 0) |
| goto fail3; |
| ep->driver_data = ss; |
| |
| result = source_sink_start_ep(ss, false, true, speed); |
| if (result < 0) { |
| usb_ep_disable(ep); |
| goto fail3; |
| } |
| } |
| out: |
| ss->cur_alt = alt; |
| |
| DBG(cdev, "%s enabled, alt intf %d\n", ss->function.name, alt); |
| return result; |
| } |
| |
| static int sourcesink_set_alt(struct usb_function *f, |
| unsigned intf, unsigned alt) |
| { |
| struct f_sourcesink *ss = func_to_ss(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| |
| disable_source_sink(ss); |
| return enable_source_sink(cdev, ss, alt); |
| } |
| |
| static int sourcesink_get_alt(struct usb_function *f, unsigned intf) |
| { |
| struct f_sourcesink *ss = func_to_ss(f); |
| |
| return ss->cur_alt; |
| } |
| |
| static void sourcesink_disable(struct usb_function *f) |
| { |
| struct f_sourcesink *ss = func_to_ss(f); |
| |
| disable_source_sink(ss); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int sourcesink_setup(struct usb_function *f, |
| const struct usb_ctrlrequest *ctrl) |
| { |
| struct usb_configuration *c = f->config; |
| struct usb_request *req = c->cdev->req; |
| int value = -EOPNOTSUPP; |
| u16 w_index = le16_to_cpu(ctrl->wIndex); |
| u16 w_value = le16_to_cpu(ctrl->wValue); |
| u16 w_length = le16_to_cpu(ctrl->wLength); |
| |
| req->length = USB_COMP_EP0_BUFSIZ; |
| |
| /* composite driver infrastructure handles everything except |
| * the two control test requests. |
| */ |
| switch (ctrl->bRequest) { |
| |
| /* |
| * These are the same vendor-specific requests supported by |
| * Intel's USB 2.0 compliance test devices. We exceed that |
| * device spec by allowing multiple-packet requests. |
| * |
| * NOTE: the Control-OUT data stays in req->buf ... better |
| * would be copying it into a scratch buffer, so that other |
| * requests may safely intervene. |
| */ |
| case 0x5b: /* control WRITE test -- fill the buffer */ |
| if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) |
| goto unknown; |
| if (w_value || w_index) |
| break; |
| /* just read that many bytes into the buffer */ |
| if (w_length > req->length) |
| break; |
| value = w_length; |
| break; |
| case 0x5c: /* control READ test -- return the buffer */ |
| if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) |
| goto unknown; |
| if (w_value || w_index) |
| break; |
| /* expect those bytes are still in the buffer; send back */ |
| if (w_length > req->length) |
| break; |
| value = w_length; |
| break; |
| |
| default: |
| unknown: |
| VDBG(c->cdev, |
| "unknown control req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| } |
| |
| /* respond with data transfer or status phase? */ |
| if (value >= 0) { |
| VDBG(c->cdev, "source/sink req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| req->zero = 0; |
| req->length = value; |
| value = usb_ep_queue(c->cdev->gadget->ep0, req, GFP_ATOMIC); |
| if (value < 0) |
| ERROR(c->cdev, "source/sink response, err %d\n", |
| value); |
| } |
| |
| /* device either stalls (value < 0) or reports success */ |
| return value; |
| } |
| |
| static struct usb_function *source_sink_alloc_func( |
| struct usb_function_instance *fi) |
| { |
| struct f_sourcesink *ss; |
| struct f_ss_opts *ss_opts; |
| |
| ss = kzalloc(sizeof(*ss), GFP_KERNEL); |
| if (!ss) |
| return ERR_PTR(-ENOMEM); |
| |
| ss_opts = container_of(fi, struct f_ss_opts, func_inst); |
| |
| mutex_lock(&ss_opts->lock); |
| ss_opts->refcnt++; |
| mutex_unlock(&ss_opts->lock); |
| |
| ss->pattern = ss_opts->pattern; |
| ss->isoc_interval = ss_opts->isoc_interval; |
| ss->isoc_maxpacket = ss_opts->isoc_maxpacket; |
| ss->isoc_mult = ss_opts->isoc_mult; |
| ss->isoc_maxburst = ss_opts->isoc_maxburst; |
| ss->buflen = ss_opts->bulk_buflen; |
| ss->bulk_qlen = ss_opts->bulk_qlen; |
| ss->iso_qlen = ss_opts->iso_qlen; |
| |
| ss->function.name = "source/sink"; |
| ss->function.bind = sourcesink_bind; |
| ss->function.set_alt = sourcesink_set_alt; |
| ss->function.get_alt = sourcesink_get_alt; |
| ss->function.disable = sourcesink_disable; |
| ss->function.setup = sourcesink_setup; |
| ss->function.strings = sourcesink_strings; |
| |
| ss->function.free_func = sourcesink_free_func; |
| |
| return &ss->function; |
| } |
| |
| static inline struct f_ss_opts *to_f_ss_opts(struct config_item *item) |
| { |
| return container_of(to_config_group(item), struct f_ss_opts, |
| func_inst.group); |
| } |
| |
| static void ss_attr_release(struct config_item *item) |
| { |
| struct f_ss_opts *ss_opts = to_f_ss_opts(item); |
| |
| usb_put_function_instance(&ss_opts->func_inst); |
| } |
| |
| static struct configfs_item_operations ss_item_ops = { |
| .release = ss_attr_release, |
| }; |
| |
| static ssize_t f_ss_opts_pattern_show(struct config_item *item, char *page) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%u\n", opts->pattern); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_ss_opts_pattern_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int ret; |
| u8 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou8(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| if (num != 0 && num != 1 && num != 2) { |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| opts->pattern = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_ss_opts_, pattern); |
| |
| static ssize_t f_ss_opts_isoc_interval_show(struct config_item *item, char *page) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%u\n", opts->isoc_interval); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_ss_opts_isoc_interval_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int ret; |
| u8 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou8(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| if (num > 16) { |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| opts->isoc_interval = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_ss_opts_, isoc_interval); |
| |
| static ssize_t f_ss_opts_isoc_maxpacket_show(struct config_item *item, char *page) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%u\n", opts->isoc_maxpacket); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_ss_opts_isoc_maxpacket_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int ret; |
| u16 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou16(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| if (num > 1024) { |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| opts->isoc_maxpacket = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_ss_opts_, isoc_maxpacket); |
| |
| static ssize_t f_ss_opts_isoc_mult_show(struct config_item *item, char *page) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%u\n", opts->isoc_mult); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_ss_opts_isoc_mult_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int ret; |
| u8 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou8(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| if (num > 2) { |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| opts->isoc_mult = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_ss_opts_, isoc_mult); |
| |
| static ssize_t f_ss_opts_isoc_maxburst_show(struct config_item *item, char *page) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%u\n", opts->isoc_maxburst); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_ss_opts_isoc_maxburst_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int ret; |
| u8 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou8(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| if (num > 15) { |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| opts->isoc_maxburst = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_ss_opts_, isoc_maxburst); |
| |
| static ssize_t f_ss_opts_bulk_buflen_show(struct config_item *item, char *page) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%u\n", opts->bulk_buflen); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_ss_opts_bulk_buflen_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int ret; |
| u32 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou32(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| opts->bulk_buflen = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_ss_opts_, bulk_buflen); |
| |
| static ssize_t f_ss_opts_bulk_qlen_show(struct config_item *item, char *page) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%u\n", opts->bulk_qlen); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_ss_opts_bulk_qlen_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int ret; |
| u32 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou32(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| opts->bulk_qlen = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_ss_opts_, bulk_qlen); |
| |
| static ssize_t f_ss_opts_iso_qlen_show(struct config_item *item, char *page) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%u\n", opts->iso_qlen); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t f_ss_opts_iso_qlen_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct f_ss_opts *opts = to_f_ss_opts(item); |
| int ret; |
| u32 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| |
| ret = kstrtou32(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| opts->iso_qlen = num; |
| ret = len; |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(f_ss_opts_, iso_qlen); |
| |
| static struct configfs_attribute *ss_attrs[] = { |
| &f_ss_opts_attr_pattern, |
| &f_ss_opts_attr_isoc_interval, |
| &f_ss_opts_attr_isoc_maxpacket, |
| &f_ss_opts_attr_isoc_mult, |
| &f_ss_opts_attr_isoc_maxburst, |
| &f_ss_opts_attr_bulk_buflen, |
| &f_ss_opts_attr_bulk_qlen, |
| &f_ss_opts_attr_iso_qlen, |
| NULL, |
| }; |
| |
| static const struct config_item_type ss_func_type = { |
| .ct_item_ops = &ss_item_ops, |
| .ct_attrs = ss_attrs, |
| .ct_owner = THIS_MODULE, |
| }; |
| |
| static void source_sink_free_instance(struct usb_function_instance *fi) |
| { |
| struct f_ss_opts *ss_opts; |
| |
| ss_opts = container_of(fi, struct f_ss_opts, func_inst); |
| kfree(ss_opts); |
| } |
| |
| static struct usb_function_instance *source_sink_alloc_inst(void) |
| { |
| struct f_ss_opts *ss_opts; |
| |
| ss_opts = kzalloc(sizeof(*ss_opts), GFP_KERNEL); |
| if (!ss_opts) |
| return ERR_PTR(-ENOMEM); |
| mutex_init(&ss_opts->lock); |
| ss_opts->func_inst.free_func_inst = source_sink_free_instance; |
| ss_opts->isoc_interval = GZERO_ISOC_INTERVAL; |
| ss_opts->isoc_maxpacket = GZERO_ISOC_MAXPACKET; |
| ss_opts->bulk_buflen = GZERO_BULK_BUFLEN; |
| ss_opts->bulk_qlen = GZERO_SS_BULK_QLEN; |
| ss_opts->iso_qlen = GZERO_SS_ISO_QLEN; |
| |
| config_group_init_type_name(&ss_opts->func_inst.group, "", |
| &ss_func_type); |
| |
| return &ss_opts->func_inst; |
| } |
| DECLARE_USB_FUNCTION(SourceSink, source_sink_alloc_inst, |
| source_sink_alloc_func); |
| |
| static int __init sslb_modinit(void) |
| { |
| int ret; |
| |
| ret = usb_function_register(&SourceSinkusb_func); |
| if (ret) |
| return ret; |
| ret = lb_modinit(); |
| if (ret) |
| usb_function_unregister(&SourceSinkusb_func); |
| return ret; |
| } |
| static void __exit sslb_modexit(void) |
| { |
| usb_function_unregister(&SourceSinkusb_func); |
| lb_modexit(); |
| } |
| module_init(sslb_modinit); |
| module_exit(sslb_modexit); |
| |
| MODULE_DESCRIPTION("USB peripheral source/sink configuration driver"); |
| MODULE_LICENSE("GPL"); |