| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2011-2013 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/bits.h> |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <soc/imx/revision.h> |
| #include <dt-bindings/clock/imx6qdl-clock.h> |
| |
| #include "clk.h" |
| |
| static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; |
| static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; |
| static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; |
| static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; |
| static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; |
| static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; |
| static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; |
| static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; |
| static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; |
| static const char *gpu_axi_sels[] = { "axi", "ahb", }; |
| static const char *pre_axi_sels[] = { "axi", "ahb", }; |
| static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; |
| static const char *gpu2d_core_sels_2[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m",}; |
| static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; |
| static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; |
| static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; |
| static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; |
| static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; |
| static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; |
| static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; |
| static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; |
| static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; |
| static const char *ipu1_di0_sels_2[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0_podf", "ldb_di1_podf", }; |
| static const char *ipu1_di1_sels_2[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0_podf", "ldb_di1_podf", }; |
| static const char *ipu2_di0_sels_2[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0_podf", "ldb_di1_podf", }; |
| static const char *ipu2_di1_sels_2[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0_podf", "ldb_di1_podf", }; |
| static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", }; |
| static const char *pcie_axi_sels[] = { "axi", "ahb", }; |
| static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", }; |
| static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; |
| static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; |
| static const char *enfc_sels_2[] = {"pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", }; |
| static const char *eim_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; |
| static const char *eim_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; |
| static const char *vdo_axi_sels[] = { "axi", "ahb", }; |
| static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; |
| static const char *uart_sels[] = { "pll3_80m", "osc", }; |
| static const char *ipg_per_sels[] = { "ipg", "osc", }; |
| static const char *ecspi_sels[] = { "pll3_60m", "osc", }; |
| static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", }; |
| static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", |
| "video_27m", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", |
| "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", }; |
| static const char *cko2_sels[] = { |
| "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1", |
| "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi", |
| "usdhc3", "dummy", "arm", "ipu1", |
| "ipu2", "vdo_axi", "osc", "gpu2d_core", |
| "gpu3d_core", "usdhc2", "ssi1", "ssi2", |
| "ssi3", "gpu3d_shader", "vpu_axi", "can_root", |
| "ldb_di0", "ldb_di1", "esai_extal", "eim_slow", |
| "uart_serial", "spdif", "asrc", "hsi_tx", |
| }; |
| static const char *cko_sels[] = { "cko1", "cko2", }; |
| static const char *lvds_sels[] = { |
| "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", |
| "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref", |
| "pcie_ref_125m", "sata_ref_100m", "usbphy1", "usbphy2", |
| "dummy", "dummy", "dummy", "dummy", "osc", |
| }; |
| static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", }; |
| static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; |
| static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; |
| static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; |
| static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; |
| static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; |
| static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; |
| static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; |
| |
| static struct clk_hw **hws; |
| static struct clk_hw_onecell_data *clk_hw_data; |
| |
| static struct clk_div_table clk_enet_ref_table[] = { |
| { .val = 0, .div = 20, }, |
| { .val = 1, .div = 10, }, |
| { .val = 2, .div = 5, }, |
| { .val = 3, .div = 4, }, |
| { /* sentinel */ } |
| }; |
| |
| static struct clk_div_table post_div_table[] = { |
| { .val = 2, .div = 1, }, |
| { .val = 1, .div = 2, }, |
| { .val = 0, .div = 4, }, |
| { /* sentinel */ } |
| }; |
| |
| static struct clk_div_table video_div_table[] = { |
| { .val = 0, .div = 1, }, |
| { .val = 1, .div = 2, }, |
| { .val = 2, .div = 1, }, |
| { .val = 3, .div = 4, }, |
| { /* sentinel */ } |
| }; |
| |
| static unsigned int share_count_esai; |
| static unsigned int share_count_asrc; |
| static unsigned int share_count_ssi1; |
| static unsigned int share_count_ssi2; |
| static unsigned int share_count_ssi3; |
| static unsigned int share_count_mipi_core_cfg; |
| static unsigned int share_count_spdif; |
| static unsigned int share_count_prg0; |
| static unsigned int share_count_prg1; |
| |
| static inline int clk_on_imx6q(void) |
| { |
| return of_machine_is_compatible("fsl,imx6q"); |
| } |
| |
| static inline int clk_on_imx6qp(void) |
| { |
| return of_machine_is_compatible("fsl,imx6qp"); |
| } |
| |
| static inline int clk_on_imx6dl(void) |
| { |
| return of_machine_is_compatible("fsl,imx6dl"); |
| } |
| |
| static int ldb_di_sel_by_clock_id(int clock_id) |
| { |
| switch (clock_id) { |
| case IMX6QDL_CLK_PLL5_VIDEO_DIV: |
| if (clk_on_imx6q() && |
| imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) |
| return -ENOENT; |
| return 0; |
| case IMX6QDL_CLK_PLL2_PFD0_352M: |
| return 1; |
| case IMX6QDL_CLK_PLL2_PFD2_396M: |
| return 2; |
| case IMX6QDL_CLK_MMDC_CH1_AXI: |
| return 3; |
| case IMX6QDL_CLK_PLL3_USB_OTG: |
| return 4; |
| default: |
| return -ENOENT; |
| } |
| } |
| |
| static void of_assigned_ldb_sels(struct device_node *node, |
| unsigned int *ldb_di0_sel, |
| unsigned int *ldb_di1_sel) |
| { |
| struct of_phandle_args clkspec; |
| int index, rc, num_parents; |
| int parent, child, sel; |
| |
| num_parents = of_count_phandle_with_args(node, "assigned-clock-parents", |
| "#clock-cells"); |
| for (index = 0; index < num_parents; index++) { |
| rc = of_parse_phandle_with_args(node, "assigned-clock-parents", |
| "#clock-cells", index, &clkspec); |
| if (rc < 0) { |
| /* skip empty (null) phandles */ |
| if (rc == -ENOENT) |
| continue; |
| else |
| return; |
| } |
| if (clkspec.np != node || clkspec.args[0] >= IMX6QDL_CLK_END) { |
| pr_err("ccm: parent clock %d not in ccm\n", index); |
| return; |
| } |
| parent = clkspec.args[0]; |
| |
| rc = of_parse_phandle_with_args(node, "assigned-clocks", |
| "#clock-cells", index, &clkspec); |
| if (rc < 0) |
| return; |
| if (clkspec.np != node || clkspec.args[0] >= IMX6QDL_CLK_END) { |
| pr_err("ccm: child clock %d not in ccm\n", index); |
| return; |
| } |
| child = clkspec.args[0]; |
| |
| if (child != IMX6QDL_CLK_LDB_DI0_SEL && |
| child != IMX6QDL_CLK_LDB_DI1_SEL) |
| continue; |
| |
| sel = ldb_di_sel_by_clock_id(parent); |
| if (sel < 0) { |
| pr_err("ccm: invalid ldb_di%d parent clock: %d\n", |
| child == IMX6QDL_CLK_LDB_DI1_SEL, parent); |
| continue; |
| } |
| |
| if (child == IMX6QDL_CLK_LDB_DI0_SEL) |
| *ldb_di0_sel = sel; |
| if (child == IMX6QDL_CLK_LDB_DI1_SEL) |
| *ldb_di1_sel = sel; |
| } |
| } |
| |
| static bool pll6_bypassed(struct device_node *node) |
| { |
| int index, ret, num_clocks; |
| struct of_phandle_args clkspec; |
| |
| num_clocks = of_count_phandle_with_args(node, "assigned-clocks", |
| "#clock-cells"); |
| if (num_clocks < 0) |
| return false; |
| |
| for (index = 0; index < num_clocks; index++) { |
| ret = of_parse_phandle_with_args(node, "assigned-clocks", |
| "#clock-cells", index, |
| &clkspec); |
| if (ret < 0) |
| return false; |
| |
| if (clkspec.np == node && |
| clkspec.args[0] == IMX6QDL_PLL6_BYPASS) |
| break; |
| } |
| |
| /* PLL6 bypass is not part of the assigned clock list */ |
| if (index == num_clocks) |
| return false; |
| |
| ret = of_parse_phandle_with_args(node, "assigned-clock-parents", |
| "#clock-cells", index, &clkspec); |
| |
| if (clkspec.args[0] != IMX6QDL_CLK_PLL6) |
| return true; |
| |
| return false; |
| } |
| |
| #define CCM_CCSR 0x0c |
| #define CCM_CS2CDR 0x2c |
| |
| #define CCSR_PLL3_SW_CLK_SEL BIT(0) |
| |
| #define CS2CDR_LDB_DI0_CLK_SEL_SHIFT 9 |
| #define CS2CDR_LDB_DI1_CLK_SEL_SHIFT 12 |
| |
| /* |
| * The only way to disable the MMDC_CH1 clock is to move it to pll3_sw_clk |
| * via periph2_clk2_sel and then to disable pll3_sw_clk by selecting the |
| * bypass clock source, since there is no CG bit for mmdc_ch1. |
| */ |
| static void mmdc_ch1_disable(void __iomem *ccm_base) |
| { |
| unsigned int reg; |
| |
| clk_set_parent(hws[IMX6QDL_CLK_PERIPH2_CLK2_SEL]->clk, |
| hws[IMX6QDL_CLK_PLL3_USB_OTG]->clk); |
| |
| /* Disable pll3_sw_clk by selecting the bypass clock source */ |
| reg = readl_relaxed(ccm_base + CCM_CCSR); |
| reg |= CCSR_PLL3_SW_CLK_SEL; |
| writel_relaxed(reg, ccm_base + CCM_CCSR); |
| } |
| |
| static void mmdc_ch1_reenable(void __iomem *ccm_base) |
| { |
| unsigned int reg; |
| |
| /* Enable pll3_sw_clk by disabling the bypass */ |
| reg = readl_relaxed(ccm_base + CCM_CCSR); |
| reg &= ~CCSR_PLL3_SW_CLK_SEL; |
| writel_relaxed(reg, ccm_base + CCM_CCSR); |
| } |
| |
| /* |
| * We have to follow a strict procedure when changing the LDB clock source, |
| * otherwise we risk introducing a glitch that can lock up the LDB divider. |
| * Things to keep in mind: |
| * |
| * 1. The current and new parent clock inputs to the mux must be disabled. |
| * 2. The default clock input for ldb_di0/1_clk_sel is mmdc_ch1_axi, which |
| * has no CG bit. |
| * 3. pll2_pfd2_396m can not be gated if it is used as memory clock. |
| * 4. In the RTL implementation of the LDB_DI_CLK_SEL muxes the top four |
| * options are in one mux and the PLL3 option along with three unused |
| * inputs is in a second mux. There is a third mux with two inputs used |
| * to decide between the first and second 4-port mux: |
| * |
| * pll5_video_div 0 --|\ |
| * pll2_pfd0_352m 1 --| |_ |
| * pll2_pfd2_396m 2 --| | `-|\ |
| * mmdc_ch1_axi 3 --|/ | | |
| * | |-- |
| * pll3_usb_otg 4 --|\ | | |
| * 5 --| |_,-|/ |
| * 6 --| | |
| * 7 --|/ |
| * |
| * The ldb_di0/1_clk_sel[1:0] bits control both 4-port muxes at the same time. |
| * The ldb_di0/1_clk_sel[2] bit controls the 2-port mux. The code below |
| * switches the parent to the bottom mux first and then manipulates the top |
| * mux to ensure that no glitch will enter the divider. |
| */ |
| static void init_ldb_clks(struct device_node *np, void __iomem *ccm_base) |
| { |
| unsigned int reg; |
| unsigned int sel[2][4]; |
| int i; |
| |
| reg = readl_relaxed(ccm_base + CCM_CS2CDR); |
| sel[0][0] = (reg >> CS2CDR_LDB_DI0_CLK_SEL_SHIFT) & 7; |
| sel[1][0] = (reg >> CS2CDR_LDB_DI1_CLK_SEL_SHIFT) & 7; |
| |
| sel[0][3] = sel[0][2] = sel[0][1] = sel[0][0]; |
| sel[1][3] = sel[1][2] = sel[1][1] = sel[1][0]; |
| |
| of_assigned_ldb_sels(np, &sel[0][3], &sel[1][3]); |
| |
| for (i = 0; i < 2; i++) { |
| /* Warn if a glitch might have been introduced already */ |
| if (sel[i][0] != 3) { |
| pr_warn("ccm: ldb_di%d_sel already changed from reset value: %d\n", |
| i, sel[i][0]); |
| } |
| |
| if (sel[i][0] == sel[i][3]) |
| continue; |
| |
| /* Only switch to or from pll2_pfd2_396m if it is disabled */ |
| if ((sel[i][0] == 2 || sel[i][3] == 2) && |
| (clk_get_parent(hws[IMX6QDL_CLK_PERIPH_PRE]->clk) == |
| hws[IMX6QDL_CLK_PLL2_PFD2_396M]->clk)) { |
| pr_err("ccm: ldb_di%d_sel: couldn't disable pll2_pfd2_396m\n", |
| i); |
| sel[i][3] = sel[i][2] = sel[i][1] = sel[i][0]; |
| continue; |
| } |
| |
| /* First switch to the bottom mux */ |
| sel[i][1] = sel[i][0] | 4; |
| |
| /* Then configure the top mux before switching back to it */ |
| sel[i][2] = sel[i][3] | 4; |
| |
| pr_debug("ccm: switching ldb_di%d_sel: %d->%d->%d->%d\n", i, |
| sel[i][0], sel[i][1], sel[i][2], sel[i][3]); |
| } |
| |
| if (sel[0][0] == sel[0][3] && sel[1][0] == sel[1][3]) |
| return; |
| |
| mmdc_ch1_disable(ccm_base); |
| |
| for (i = 1; i < 4; i++) { |
| reg = readl_relaxed(ccm_base + CCM_CS2CDR); |
| reg &= ~((7 << CS2CDR_LDB_DI0_CLK_SEL_SHIFT) | |
| (7 << CS2CDR_LDB_DI1_CLK_SEL_SHIFT)); |
| reg |= ((sel[0][i] << CS2CDR_LDB_DI0_CLK_SEL_SHIFT) | |
| (sel[1][i] << CS2CDR_LDB_DI1_CLK_SEL_SHIFT)); |
| writel_relaxed(reg, ccm_base + CCM_CS2CDR); |
| } |
| |
| mmdc_ch1_reenable(ccm_base); |
| } |
| |
| #define CCM_ANALOG_PLL_VIDEO 0xa0 |
| #define CCM_ANALOG_PFD_480 0xf0 |
| #define CCM_ANALOG_PFD_528 0x100 |
| |
| #define PLL_ENABLE BIT(13) |
| |
| #define PFD0_CLKGATE BIT(7) |
| #define PFD1_CLKGATE BIT(15) |
| #define PFD2_CLKGATE BIT(23) |
| #define PFD3_CLKGATE BIT(31) |
| |
| static void disable_anatop_clocks(void __iomem *anatop_base) |
| { |
| unsigned int reg; |
| |
| /* Make sure PLL2 PFDs 0-2 are gated */ |
| reg = readl_relaxed(anatop_base + CCM_ANALOG_PFD_528); |
| /* Cannot gate PFD2 if pll2_pfd2_396m is the parent of MMDC clock */ |
| if (clk_get_parent(hws[IMX6QDL_CLK_PERIPH_PRE]->clk) == |
| hws[IMX6QDL_CLK_PLL2_PFD2_396M]->clk) |
| reg |= PFD0_CLKGATE | PFD1_CLKGATE; |
| else |
| reg |= PFD0_CLKGATE | PFD1_CLKGATE | PFD2_CLKGATE; |
| writel_relaxed(reg, anatop_base + CCM_ANALOG_PFD_528); |
| |
| /* Make sure PLL3 PFDs 0-3 are gated */ |
| reg = readl_relaxed(anatop_base + CCM_ANALOG_PFD_480); |
| reg |= PFD0_CLKGATE | PFD1_CLKGATE | PFD2_CLKGATE | PFD3_CLKGATE; |
| writel_relaxed(reg, anatop_base + CCM_ANALOG_PFD_480); |
| |
| /* Make sure PLL5 is disabled */ |
| reg = readl_relaxed(anatop_base + CCM_ANALOG_PLL_VIDEO); |
| reg &= ~PLL_ENABLE; |
| writel_relaxed(reg, anatop_base + CCM_ANALOG_PLL_VIDEO); |
| } |
| |
| static struct clk_hw * __init imx6q_obtain_fixed_clk_hw(struct device_node *np, |
| const char *name, |
| unsigned long rate) |
| { |
| struct clk *clk = of_clk_get_by_name(np, name); |
| struct clk_hw *hw; |
| |
| if (IS_ERR(clk)) |
| hw = imx_obtain_fixed_clock_hw(name, rate); |
| else |
| hw = __clk_get_hw(clk); |
| |
| return hw; |
| } |
| |
| static void __init imx6q_clocks_init(struct device_node *ccm_node) |
| { |
| struct device_node *np; |
| void __iomem *anatop_base, *base; |
| int ret; |
| |
| clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, |
| IMX6QDL_CLK_END), GFP_KERNEL); |
| if (WARN_ON(!clk_hw_data)) |
| return; |
| |
| clk_hw_data->num = IMX6QDL_CLK_END; |
| hws = clk_hw_data->hws; |
| |
| hws[IMX6QDL_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0); |
| |
| hws[IMX6QDL_CLK_CKIL] = imx6q_obtain_fixed_clk_hw(ccm_node, "ckil", 0); |
| hws[IMX6QDL_CLK_CKIH] = imx6q_obtain_fixed_clk_hw(ccm_node, "ckih1", 0); |
| hws[IMX6QDL_CLK_OSC] = imx6q_obtain_fixed_clk_hw(ccm_node, "osc", 0); |
| |
| /* Clock source from external clock via CLK1/2 PADs */ |
| hws[IMX6QDL_CLK_ANACLK1] = imx6q_obtain_fixed_clk_hw(ccm_node, "anaclk1", 0); |
| hws[IMX6QDL_CLK_ANACLK2] = imx6q_obtain_fixed_clk_hw(ccm_node, "anaclk2", 0); |
| |
| np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); |
| anatop_base = base = of_iomap(np, 0); |
| WARN_ON(!base); |
| of_node_put(np); |
| |
| /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */ |
| if (clk_on_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) { |
| post_div_table[1].div = 1; |
| post_div_table[2].div = 1; |
| video_div_table[1].div = 1; |
| video_div_table[3].div = 1; |
| } |
| |
| hws[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_hw_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); |
| hws[IMX6QDL_PLL2_BYPASS_SRC] = imx_clk_hw_mux("pll2_bypass_src", base + 0x30, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); |
| hws[IMX6QDL_PLL3_BYPASS_SRC] = imx_clk_hw_mux("pll3_bypass_src", base + 0x10, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); |
| hws[IMX6QDL_PLL4_BYPASS_SRC] = imx_clk_hw_mux("pll4_bypass_src", base + 0x70, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); |
| hws[IMX6QDL_PLL5_BYPASS_SRC] = imx_clk_hw_mux("pll5_bypass_src", base + 0xa0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); |
| hws[IMX6QDL_PLL6_BYPASS_SRC] = imx_clk_hw_mux("pll6_bypass_src", base + 0xe0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); |
| hws[IMX6QDL_PLL7_BYPASS_SRC] = imx_clk_hw_mux("pll7_bypass_src", base + 0x20, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); |
| |
| /* type name parent_name base div_mask */ |
| hws[IMX6QDL_CLK_PLL1] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1", "osc", base + 0x00, 0x7f); |
| hws[IMX6QDL_CLK_PLL2] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2", "osc", base + 0x30, 0x1); |
| hws[IMX6QDL_CLK_PLL3] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3", "osc", base + 0x10, 0x3); |
| hws[IMX6QDL_CLK_PLL4] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll4", "osc", base + 0x70, 0x7f); |
| hws[IMX6QDL_CLK_PLL5] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5", "osc", base + 0xa0, 0x7f); |
| hws[IMX6QDL_CLK_PLL6] = imx_clk_hw_pllv3(IMX_PLLV3_ENET, "pll6", "osc", base + 0xe0, 0x3); |
| hws[IMX6QDL_CLK_PLL7] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll7", "osc", base + 0x20, 0x3); |
| |
| hws[IMX6QDL_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_PLL4_BYPASS] = imx_clk_hw_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_PLL6_BYPASS] = imx_clk_hw_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_PLL7_BYPASS] = imx_clk_hw_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); |
| |
| /* Do not bypass PLLs initially */ |
| clk_set_parent(hws[IMX6QDL_PLL1_BYPASS]->clk, hws[IMX6QDL_CLK_PLL1]->clk); |
| clk_set_parent(hws[IMX6QDL_PLL2_BYPASS]->clk, hws[IMX6QDL_CLK_PLL2]->clk); |
| clk_set_parent(hws[IMX6QDL_PLL3_BYPASS]->clk, hws[IMX6QDL_CLK_PLL3]->clk); |
| clk_set_parent(hws[IMX6QDL_PLL4_BYPASS]->clk, hws[IMX6QDL_CLK_PLL4]->clk); |
| clk_set_parent(hws[IMX6QDL_PLL5_BYPASS]->clk, hws[IMX6QDL_CLK_PLL5]->clk); |
| clk_set_parent(hws[IMX6QDL_PLL6_BYPASS]->clk, hws[IMX6QDL_CLK_PLL6]->clk); |
| clk_set_parent(hws[IMX6QDL_PLL7_BYPASS]->clk, hws[IMX6QDL_CLK_PLL7]->clk); |
| |
| hws[IMX6QDL_CLK_PLL1_SYS] = imx_clk_hw_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); |
| hws[IMX6QDL_CLK_PLL2_BUS] = imx_clk_hw_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); |
| hws[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_hw_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); |
| hws[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_hw_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); |
| hws[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_hw_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); |
| hws[IMX6QDL_CLK_PLL6_ENET] = imx_clk_hw_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); |
| hws[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_hw_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); |
| |
| /* |
| * Bit 20 is the reserved and read-only bit, we do this only for: |
| * - Do nothing for usbphy clk_enable/disable |
| * - Keep refcount when do usbphy clk_enable/disable, in that case, |
| * the clk framework may need to enable/disable usbphy's parent |
| */ |
| hws[IMX6QDL_CLK_USBPHY1] = imx_clk_hw_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); |
| hws[IMX6QDL_CLK_USBPHY2] = imx_clk_hw_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); |
| |
| /* |
| * usbphy*_gate needs to be on after system boots up, and software |
| * never needs to control it anymore. |
| */ |
| hws[IMX6QDL_CLK_USBPHY1_GATE] = imx_clk_hw_gate("usbphy1_gate", "dummy", base + 0x10, 6); |
| hws[IMX6QDL_CLK_USBPHY2_GATE] = imx_clk_hw_gate("usbphy2_gate", "dummy", base + 0x20, 6); |
| |
| /* |
| * The ENET PLL is special in that is has multiple outputs with |
| * different post-dividers that are all affected by the single bypass |
| * bit, so a single mux bit affects 3 independent branches of the clock |
| * tree. There is no good way to model this in the clock framework and |
| * dynamically changing the bypass bit, will yield unexpected results. |
| * So we treat any configuration that bypasses the ENET PLL as |
| * essentially static with the divider ratios reflecting the bypass |
| * status. |
| * |
| */ |
| if (!pll6_bypassed(ccm_node)) { |
| hws[IMX6QDL_CLK_SATA_REF] = imx_clk_hw_fixed_factor("sata_ref", "pll6_enet", 1, 5); |
| hws[IMX6QDL_CLK_PCIE_REF] = imx_clk_hw_fixed_factor("pcie_ref", "pll6_enet", 1, 4); |
| hws[IMX6QDL_CLK_ENET_REF] = clk_hw_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, |
| base + 0xe0, 0, 2, 0, clk_enet_ref_table, |
| &imx_ccm_lock); |
| } else { |
| hws[IMX6QDL_CLK_SATA_REF] = imx_clk_hw_fixed_factor("sata_ref", "pll6_enet", 1, 1); |
| hws[IMX6QDL_CLK_PCIE_REF] = imx_clk_hw_fixed_factor("pcie_ref", "pll6_enet", 1, 1); |
| hws[IMX6QDL_CLK_ENET_REF] = imx_clk_hw_fixed_factor("enet_ref", "pll6_enet", 1, 1); |
| } |
| |
| hws[IMX6QDL_CLK_SATA_REF_100M] = imx_clk_hw_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20); |
| hws[IMX6QDL_CLK_PCIE_REF_125M] = imx_clk_hw_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); |
| |
| hws[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_hw_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); |
| hws[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_hw_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); |
| |
| /* |
| * lvds1_gate and lvds2_gate are pseudo-gates. Both can be |
| * independently configured as clock inputs or outputs. We treat |
| * the "output_enable" bit as a gate, even though it's really just |
| * enabling clock output. Initially the gate bits are cleared, as |
| * otherwise the exclusive configuration gets locked in the setup done |
| * by software running before the clock driver, with no way to change |
| * it. |
| */ |
| writel(readl(base + 0x160) & ~0x3c00, base + 0x160); |
| hws[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_hw_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12)); |
| hws[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_hw_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13)); |
| |
| hws[IMX6QDL_CLK_LVDS1_IN] = imx_clk_hw_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); |
| hws[IMX6QDL_CLK_LVDS2_IN] = imx_clk_hw_gate_exclusive("lvds2_in", "anaclk2", base + 0x160, 13, BIT(11)); |
| |
| /* name parent_name reg idx */ |
| hws[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); |
| hws[IMX6QDL_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); |
| hws[IMX6QDL_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); |
| hws[IMX6QDL_CLK_PLL3_PFD0_720M] = imx_clk_hw_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); |
| hws[IMX6QDL_CLK_PLL3_PFD1_540M] = imx_clk_hw_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); |
| hws[IMX6QDL_CLK_PLL3_PFD2_508M] = imx_clk_hw_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); |
| hws[IMX6QDL_CLK_PLL3_PFD3_454M] = imx_clk_hw_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); |
| |
| /* name parent_name mult div */ |
| hws[IMX6QDL_CLK_PLL2_198M] = imx_clk_hw_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); |
| hws[IMX6QDL_CLK_PLL3_120M] = imx_clk_hw_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); |
| hws[IMX6QDL_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); |
| hws[IMX6QDL_CLK_PLL3_60M] = imx_clk_hw_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); |
| hws[IMX6QDL_CLK_TWD] = imx_clk_hw_fixed_factor("twd", "arm", 1, 2); |
| hws[IMX6QDL_CLK_GPT_3M] = imx_clk_hw_fixed_factor("gpt_3m", "osc", 1, 8); |
| hws[IMX6QDL_CLK_VIDEO_27M] = imx_clk_hw_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20); |
| if (clk_on_imx6dl() || clk_on_imx6qp()) { |
| hws[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_hw_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); |
| hws[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_hw_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); |
| } |
| |
| hws[IMX6QDL_CLK_PLL4_POST_DIV] = clk_hw_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); |
| if (clk_on_imx6q() || clk_on_imx6qp()) |
| hws[IMX6QDL_CLK_PLL4_AUDIO_DIV] = imx_clk_hw_fixed_factor("pll4_audio_div", "pll4_post_div", 1, 1); |
| else |
| hws[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_hw_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); |
| hws[IMX6QDL_CLK_PLL5_POST_DIV] = clk_hw_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); |
| hws[IMX6QDL_CLK_PLL5_VIDEO_DIV] = clk_hw_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); |
| |
| np = ccm_node; |
| base = of_iomap(np, 0); |
| WARN_ON(!base); |
| |
| /* name reg shift width parent_names num_parents */ |
| hws[IMX6QDL_CLK_STEP] = imx_clk_hw_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); |
| hws[IMX6QDL_CLK_PLL1_SW] = imx_clk_hw_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); |
| hws[IMX6QDL_CLK_PERIPH_PRE] = imx_clk_hw_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); |
| hws[IMX6QDL_CLK_PERIPH2_PRE] = imx_clk_hw_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); |
| hws[IMX6QDL_CLK_PERIPH_CLK2_SEL] = imx_clk_hw_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); |
| hws[IMX6QDL_CLK_PERIPH2_CLK2_SEL] = imx_clk_hw_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); |
| hws[IMX6QDL_CLK_AXI_SEL] = imx_clk_hw_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); |
| hws[IMX6QDL_CLK_ESAI_SEL] = imx_clk_hw_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); |
| hws[IMX6QDL_CLK_ASRC_SEL] = imx_clk_hw_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); |
| hws[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_hw_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); |
| if (clk_on_imx6q()) { |
| hws[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_hw_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); |
| hws[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_hw_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); |
| } |
| if (clk_on_imx6qp()) { |
| hws[IMX6QDL_CLK_CAN_SEL] = imx_clk_hw_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels)); |
| hws[IMX6QDL_CLK_ECSPI_SEL] = imx_clk_hw_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); |
| hws[IMX6QDL_CLK_IPG_PER_SEL] = imx_clk_hw_mux("ipg_per_sel", base + 0x1c, 6, 1, ipg_per_sels, ARRAY_SIZE(ipg_per_sels)); |
| hws[IMX6QDL_CLK_UART_SEL] = imx_clk_hw_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); |
| hws[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_hw_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels_2, ARRAY_SIZE(gpu2d_core_sels_2)); |
| } else if (clk_on_imx6dl()) { |
| hws[IMX6QDL_CLK_MLB_SEL] = imx_clk_hw_mux("mlb_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels)); |
| } else { |
| hws[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_hw_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels)); |
| } |
| hws[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_hw_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels)); |
| if (clk_on_imx6dl()) |
| hws[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_hw_mux("gpu2d_core_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); |
| else |
| hws[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_hw_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); |
| hws[IMX6QDL_CLK_IPU1_SEL] = imx_clk_hw_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); |
| hws[IMX6QDL_CLK_IPU2_SEL] = imx_clk_hw_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); |
| |
| disable_anatop_clocks(anatop_base); |
| |
| imx_mmdc_mask_handshake(base, 1); |
| |
| if (clk_on_imx6qp()) { |
| hws[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_hw_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_hw_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); |
| } else { |
| /* |
| * The LDB_DI0/1_SEL muxes are registered read-only due to a hardware |
| * bug. Set the muxes to the requested values before registering the |
| * ldb_di_sel clocks. |
| */ |
| init_ldb_clks(np, base); |
| |
| hws[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_hw_mux_ldb("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); |
| hws[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_hw_mux_ldb("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); |
| } |
| |
| hws[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_hw_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_hw_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_hw_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_IPU2_DI1_PRE_SEL] = imx_clk_hw_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_HSI_TX_SEL] = imx_clk_hw_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels)); |
| hws[IMX6QDL_CLK_PCIE_AXI_SEL] = imx_clk_hw_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); |
| |
| if (clk_on_imx6qp()) { |
| hws[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_hw_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels_2, ARRAY_SIZE(ipu1_di0_sels_2), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_hw_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels_2, ARRAY_SIZE(ipu1_di1_sels_2), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_hw_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels_2, ARRAY_SIZE(ipu2_di0_sels_2), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_hw_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels_2, ARRAY_SIZE(ipu2_di1_sels_2), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_SSI1_SEL] = imx_clk_hw_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); |
| hws[IMX6QDL_CLK_SSI2_SEL] = imx_clk_hw_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); |
| hws[IMX6QDL_CLK_SSI3_SEL] = imx_clk_hw_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); |
| hws[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); |
| hws[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); |
| hws[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_hw_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); |
| hws[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_hw_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); |
| hws[IMX6QDL_CLK_ENFC_SEL] = imx_clk_hw_mux("enfc_sel", base + 0x2c, 15, 3, enfc_sels_2, ARRAY_SIZE(enfc_sels_2)); |
| hws[IMX6QDL_CLK_EIM_SEL] = imx_clk_hw_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels)); |
| hws[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_hw_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels)); |
| hws[IMX6QDL_CLK_PRE_AXI] = imx_clk_hw_mux("pre_axi", base + 0x18, 1, 1, pre_axi_sels, ARRAY_SIZE(pre_axi_sels)); |
| } else { |
| hws[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_hw_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_hw_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_hw_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_hw_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT); |
| hws[IMX6QDL_CLK_SSI1_SEL] = imx_clk_hw_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_SSI2_SEL] = imx_clk_hw_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_SSI3_SEL] = imx_clk_hw_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_hw_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_hw_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_hw_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_hw_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_ENFC_SEL] = imx_clk_hw_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); |
| hws[IMX6QDL_CLK_EIM_SEL] = imx_clk_hw_fixup_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels), imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_hw_fixup_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels), imx_cscmr1_fixup); |
| } |
| |
| hws[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_hw_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels)); |
| hws[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_hw_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels)); |
| hws[IMX6QDL_CLK_CKO1_SEL] = imx_clk_hw_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); |
| hws[IMX6QDL_CLK_CKO2_SEL] = imx_clk_hw_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels)); |
| hws[IMX6QDL_CLK_CKO] = imx_clk_hw_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels)); |
| |
| /* name reg shift width busy: reg, shift parent_names num_parents */ |
| hws[IMX6QDL_CLK_PERIPH] = imx_clk_hw_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); |
| hws[IMX6QDL_CLK_PERIPH2] = imx_clk_hw_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); |
| |
| /* name parent_name reg shift width */ |
| hws[IMX6QDL_CLK_PERIPH_CLK2] = imx_clk_hw_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); |
| hws[IMX6QDL_CLK_PERIPH2_CLK2] = imx_clk_hw_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); |
| hws[IMX6QDL_CLK_IPG] = imx_clk_hw_divider("ipg", "ahb", base + 0x14, 8, 2); |
| hws[IMX6QDL_CLK_ESAI_PRED] = imx_clk_hw_divider("esai_pred", "esai_sel", base + 0x28, 9, 3); |
| hws[IMX6QDL_CLK_ESAI_PODF] = imx_clk_hw_divider("esai_podf", "esai_pred", base + 0x28, 25, 3); |
| hws[IMX6QDL_CLK_ASRC_PRED] = imx_clk_hw_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3); |
| hws[IMX6QDL_CLK_ASRC_PODF] = imx_clk_hw_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3); |
| hws[IMX6QDL_CLK_SPDIF_PRED] = imx_clk_hw_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); |
| hws[IMX6QDL_CLK_SPDIF_PODF] = imx_clk_hw_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); |
| |
| if (clk_on_imx6qp()) { |
| hws[IMX6QDL_CLK_IPG_PER] = imx_clk_hw_divider("ipg_per", "ipg_per_sel", base + 0x1c, 0, 6); |
| hws[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_hw_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6); |
| hws[IMX6QDL_CLK_CAN_ROOT] = imx_clk_hw_divider("can_root", "can_sel", base + 0x20, 2, 6); |
| hws[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_hw_divider("uart_serial_podf", "uart_sel", base + 0x24, 0, 6); |
| hws[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_hw_fixed_factor("ldb_di0_div_3_5", "ldb_di0", 2, 7); |
| hws[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_hw_fixed_factor("ldb_di1_div_3_5", "ldb_di1", 2, 7); |
| } else { |
| hws[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_hw_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6); |
| hws[IMX6QDL_CLK_CAN_ROOT] = imx_clk_hw_divider("can_root", "pll3_60m", base + 0x20, 2, 6); |
| hws[IMX6QDL_CLK_IPG_PER] = imx_clk_hw_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_hw_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6); |
| hws[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_hw_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); |
| hws[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_hw_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); |
| } |
| |
| if (clk_on_imx6dl()) |
| hws[IMX6QDL_CLK_MLB_PODF] = imx_clk_hw_divider("mlb_podf", "mlb_sel", base + 0x18, 23, 3); |
| else |
| hws[IMX6QDL_CLK_GPU2D_CORE_PODF] = imx_clk_hw_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3); |
| hws[IMX6QDL_CLK_GPU3D_CORE_PODF] = imx_clk_hw_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3); |
| if (clk_on_imx6dl()) |
| hws[IMX6QDL_CLK_GPU2D_CORE_PODF] = imx_clk_hw_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 29, 3); |
| else |
| hws[IMX6QDL_CLK_GPU3D_SHADER] = imx_clk_hw_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); |
| hws[IMX6QDL_CLK_IPU1_PODF] = imx_clk_hw_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); |
| hws[IMX6QDL_CLK_IPU2_PODF] = imx_clk_hw_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); |
| hws[IMX6QDL_CLK_LDB_DI0_PODF] = imx_clk_hw_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0); |
| hws[IMX6QDL_CLK_LDB_DI1_PODF] = imx_clk_hw_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0); |
| hws[IMX6QDL_CLK_IPU1_DI0_PRE] = imx_clk_hw_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); |
| hws[IMX6QDL_CLK_IPU1_DI1_PRE] = imx_clk_hw_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); |
| hws[IMX6QDL_CLK_IPU2_DI0_PRE] = imx_clk_hw_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); |
| hws[IMX6QDL_CLK_IPU2_DI1_PRE] = imx_clk_hw_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3); |
| hws[IMX6QDL_CLK_HSI_TX_PODF] = imx_clk_hw_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3); |
| hws[IMX6QDL_CLK_SSI1_PRED] = imx_clk_hw_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); |
| hws[IMX6QDL_CLK_SSI1_PODF] = imx_clk_hw_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); |
| hws[IMX6QDL_CLK_SSI2_PRED] = imx_clk_hw_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); |
| hws[IMX6QDL_CLK_SSI2_PODF] = imx_clk_hw_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); |
| hws[IMX6QDL_CLK_SSI3_PRED] = imx_clk_hw_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); |
| hws[IMX6QDL_CLK_SSI3_PODF] = imx_clk_hw_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); |
| hws[IMX6QDL_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); |
| hws[IMX6QDL_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); |
| hws[IMX6QDL_CLK_USDHC3_PODF] = imx_clk_hw_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); |
| hws[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_hw_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); |
| hws[IMX6QDL_CLK_ENFC_PRED] = imx_clk_hw_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3); |
| hws[IMX6QDL_CLK_ENFC_PODF] = imx_clk_hw_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6); |
| if (clk_on_imx6qp()) { |
| hws[IMX6QDL_CLK_EIM_PODF] = imx_clk_hw_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3); |
| hws[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_hw_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3); |
| } else { |
| hws[IMX6QDL_CLK_EIM_PODF] = imx_clk_hw_fixup_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup); |
| hws[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_hw_fixup_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup); |
| } |
| |
| hws[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_hw_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3); |
| hws[IMX6QDL_CLK_CKO1_PODF] = imx_clk_hw_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); |
| hws[IMX6QDL_CLK_CKO2_PODF] = imx_clk_hw_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3); |
| |
| /* name parent_name reg shift width busy: reg, shift */ |
| hws[IMX6QDL_CLK_AXI] = imx_clk_hw_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0); |
| hws[IMX6QDL_CLK_MMDC_CH0_AXI_PODF] = imx_clk_hw_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4); |
| if (clk_on_imx6qp()) { |
| hws[IMX6QDL_CLK_MMDC_CH1_AXI_CG] = imx_clk_hw_gate("mmdc_ch1_axi_cg", "periph2", base + 0x4, 18); |
| hws[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_hw_busy_divider("mmdc_ch1_axi_podf", "mmdc_ch1_axi_cg", base + 0x14, 3, 3, base + 0x48, 2); |
| } else { |
| hws[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_hw_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); |
| } |
| hws[IMX6QDL_CLK_ARM] = imx_clk_hw_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); |
| hws[IMX6QDL_CLK_AHB] = imx_clk_hw_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); |
| |
| /* name parent_name reg shift */ |
| hws[IMX6QDL_CLK_APBH_DMA] = imx_clk_hw_gate2("apbh_dma", "usdhc3", base + 0x68, 4); |
| hws[IMX6QDL_CLK_ASRC] = imx_clk_hw_gate2_shared("asrc", "asrc_podf", base + 0x68, 6, &share_count_asrc); |
| hws[IMX6QDL_CLK_ASRC_IPG] = imx_clk_hw_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); |
| hws[IMX6QDL_CLK_ASRC_MEM] = imx_clk_hw_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); |
| hws[IMX6QDL_CLK_CAAM_MEM] = imx_clk_hw_gate2("caam_mem", "ahb", base + 0x68, 8); |
| hws[IMX6QDL_CLK_CAAM_ACLK] = imx_clk_hw_gate2("caam_aclk", "ahb", base + 0x68, 10); |
| hws[IMX6QDL_CLK_CAAM_IPG] = imx_clk_hw_gate2("caam_ipg", "ipg", base + 0x68, 12); |
| hws[IMX6QDL_CLK_CAN1_IPG] = imx_clk_hw_gate2("can1_ipg", "ipg", base + 0x68, 14); |
| hws[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_hw_gate2("can1_serial", "can_root", base + 0x68, 16); |
| hws[IMX6QDL_CLK_CAN2_IPG] = imx_clk_hw_gate2("can2_ipg", "ipg", base + 0x68, 18); |
| hws[IMX6QDL_CLK_CAN2_SERIAL] = imx_clk_hw_gate2("can2_serial", "can_root", base + 0x68, 20); |
| hws[IMX6QDL_CLK_DCIC1] = imx_clk_hw_gate2("dcic1", "ipu1_podf", base + 0x68, 24); |
| hws[IMX6QDL_CLK_DCIC2] = imx_clk_hw_gate2("dcic2", "ipu2_podf", base + 0x68, 26); |
| hws[IMX6QDL_CLK_ECSPI1] = imx_clk_hw_gate2("ecspi1", "ecspi_root", base + 0x6c, 0); |
| hws[IMX6QDL_CLK_ECSPI2] = imx_clk_hw_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); |
| hws[IMX6QDL_CLK_ECSPI3] = imx_clk_hw_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); |
| hws[IMX6QDL_CLK_ECSPI4] = imx_clk_hw_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); |
| if (clk_on_imx6dl()) |
| hws[IMX6DL_CLK_I2C4] = imx_clk_hw_gate2("i2c4", "ipg_per", base + 0x6c, 8); |
| else |
| hws[IMX6Q_CLK_ECSPI5] = imx_clk_hw_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); |
| hws[IMX6QDL_CLK_ENET] = imx_clk_hw_gate2("enet", "ipg", base + 0x6c, 10); |
| hws[IMX6QDL_CLK_EPIT1] = imx_clk_hw_gate2("epit1", "ipg", base + 0x6c, 12); |
| hws[IMX6QDL_CLK_EPIT2] = imx_clk_hw_gate2("epit2", "ipg", base + 0x6c, 14); |
| hws[IMX6QDL_CLK_ESAI_EXTAL] = imx_clk_hw_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); |
| hws[IMX6QDL_CLK_ESAI_IPG] = imx_clk_hw_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai); |
| hws[IMX6QDL_CLK_ESAI_MEM] = imx_clk_hw_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); |
| hws[IMX6QDL_CLK_GPT_IPG] = imx_clk_hw_gate2("gpt_ipg", "ipg", base + 0x6c, 20); |
| hws[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_hw_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); |
| hws[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_hw_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); |
| hws[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_hw_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26); |
| hws[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_hw_gate2("hdmi_iahb", "ahb", base + 0x70, 0); |
| hws[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_hw_gate2("hdmi_isfr", "mipi_core_cfg", base + 0x70, 4); |
| hws[IMX6QDL_CLK_I2C1] = imx_clk_hw_gate2("i2c1", "ipg_per", base + 0x70, 6); |
| hws[IMX6QDL_CLK_I2C2] = imx_clk_hw_gate2("i2c2", "ipg_per", base + 0x70, 8); |
| hws[IMX6QDL_CLK_I2C3] = imx_clk_hw_gate2("i2c3", "ipg_per", base + 0x70, 10); |
| hws[IMX6QDL_CLK_IIM] = imx_clk_hw_gate2("iim", "ipg", base + 0x70, 12); |
| hws[IMX6QDL_CLK_ENFC] = imx_clk_hw_gate2("enfc", "enfc_podf", base + 0x70, 14); |
| hws[IMX6QDL_CLK_VDOA] = imx_clk_hw_gate2("vdoa", "vdo_axi", base + 0x70, 26); |
| hws[IMX6QDL_CLK_IPU1] = imx_clk_hw_gate2("ipu1", "ipu1_podf", base + 0x74, 0); |
| hws[IMX6QDL_CLK_IPU1_DI0] = imx_clk_hw_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2); |
| hws[IMX6QDL_CLK_IPU1_DI1] = imx_clk_hw_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4); |
| hws[IMX6QDL_CLK_IPU2] = imx_clk_hw_gate2("ipu2", "ipu2_podf", base + 0x74, 6); |
| hws[IMX6QDL_CLK_IPU2_DI0] = imx_clk_hw_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8); |
| if (clk_on_imx6qp()) { |
| hws[IMX6QDL_CLK_LDB_DI0] = imx_clk_hw_gate2("ldb_di0", "ldb_di0_sel", base + 0x74, 12); |
| hws[IMX6QDL_CLK_LDB_DI1] = imx_clk_hw_gate2("ldb_di1", "ldb_di1_sel", base + 0x74, 14); |
| } else { |
| hws[IMX6QDL_CLK_LDB_DI0] = imx_clk_hw_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12); |
| hws[IMX6QDL_CLK_LDB_DI1] = imx_clk_hw_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); |
| } |
| hws[IMX6QDL_CLK_IPU2_DI1] = imx_clk_hw_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); |
| hws[IMX6QDL_CLK_HSI_TX] = imx_clk_hw_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg); |
| hws[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_hw_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg); |
| hws[IMX6QDL_CLK_MIPI_IPG] = imx_clk_hw_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg); |
| |
| if (clk_on_imx6dl()) |
| /* |
| * The multiplexer and divider of the imx6q clock gpu2d get |
| * redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl. |
| */ |
| hws[IMX6QDL_CLK_MLB] = imx_clk_hw_gate2("mlb", "mlb_podf", base + 0x74, 18); |
| else |
| hws[IMX6QDL_CLK_MLB] = imx_clk_hw_gate2("mlb", "axi", base + 0x74, 18); |
| hws[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_hw_gate2_flags("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20, CLK_IS_CRITICAL); |
| hws[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_hw_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); |
| hws[IMX6QDL_CLK_MMDC_P0_IPG] = imx_clk_hw_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL); |
| hws[IMX6QDL_CLK_OCRAM] = imx_clk_hw_gate2("ocram", "ahb", base + 0x74, 28); |
| hws[IMX6QDL_CLK_OPENVG_AXI] = imx_clk_hw_gate2("openvg_axi", "axi", base + 0x74, 30); |
| hws[IMX6QDL_CLK_PCIE_AXI] = imx_clk_hw_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0); |
| hws[IMX6QDL_CLK_PER1_BCH] = imx_clk_hw_gate2("per1_bch", "usdhc3", base + 0x78, 12); |
| hws[IMX6QDL_CLK_PWM1] = imx_clk_hw_gate2("pwm1", "ipg_per", base + 0x78, 16); |
| hws[IMX6QDL_CLK_PWM2] = imx_clk_hw_gate2("pwm2", "ipg_per", base + 0x78, 18); |
| hws[IMX6QDL_CLK_PWM3] = imx_clk_hw_gate2("pwm3", "ipg_per", base + 0x78, 20); |
| hws[IMX6QDL_CLK_PWM4] = imx_clk_hw_gate2("pwm4", "ipg_per", base + 0x78, 22); |
| hws[IMX6QDL_CLK_GPMI_BCH_APB] = imx_clk_hw_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24); |
| hws[IMX6QDL_CLK_GPMI_BCH] = imx_clk_hw_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); |
| hws[IMX6QDL_CLK_GPMI_IO] = imx_clk_hw_gate2("gpmi_io", "enfc", base + 0x78, 28); |
| hws[IMX6QDL_CLK_GPMI_APB] = imx_clk_hw_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); |
| hws[IMX6QDL_CLK_ROM] = imx_clk_hw_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL); |
| hws[IMX6QDL_CLK_SATA] = imx_clk_hw_gate2("sata", "ahb", base + 0x7c, 4); |
| hws[IMX6QDL_CLK_SDMA] = imx_clk_hw_gate2("sdma", "ahb", base + 0x7c, 6); |
| hws[IMX6QDL_CLK_SPBA] = imx_clk_hw_gate2("spba", "ipg", base + 0x7c, 12); |
| hws[IMX6QDL_CLK_SPDIF] = imx_clk_hw_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_spdif); |
| hws[IMX6QDL_CLK_SPDIF_GCLK] = imx_clk_hw_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_spdif); |
| hws[IMX6QDL_CLK_SSI1_IPG] = imx_clk_hw_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); |
| hws[IMX6QDL_CLK_SSI2_IPG] = imx_clk_hw_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); |
| hws[IMX6QDL_CLK_SSI3_IPG] = imx_clk_hw_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); |
| hws[IMX6QDL_CLK_SSI1] = imx_clk_hw_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); |
| hws[IMX6QDL_CLK_SSI2] = imx_clk_hw_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); |
| hws[IMX6QDL_CLK_SSI3] = imx_clk_hw_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); |
| hws[IMX6QDL_CLK_UART_IPG] = imx_clk_hw_gate2("uart_ipg", "ipg", base + 0x7c, 24); |
| hws[IMX6QDL_CLK_UART_SERIAL] = imx_clk_hw_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26); |
| hws[IMX6QDL_CLK_USBOH3] = imx_clk_hw_gate2("usboh3", "ipg", base + 0x80, 0); |
| hws[IMX6QDL_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); |
| hws[IMX6QDL_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); |
| hws[IMX6QDL_CLK_USDHC3] = imx_clk_hw_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); |
| hws[IMX6QDL_CLK_USDHC4] = imx_clk_hw_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); |
| hws[IMX6QDL_CLK_EIM_SLOW] = imx_clk_hw_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10); |
| hws[IMX6QDL_CLK_VDO_AXI] = imx_clk_hw_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12); |
| hws[IMX6QDL_CLK_VPU_AXI] = imx_clk_hw_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14); |
| if (clk_on_imx6qp()) { |
| hws[IMX6QDL_CLK_PRE0] = imx_clk_hw_gate2("pre0", "pre_axi", base + 0x80, 16); |
| hws[IMX6QDL_CLK_PRE1] = imx_clk_hw_gate2("pre1", "pre_axi", base + 0x80, 18); |
| hws[IMX6QDL_CLK_PRE2] = imx_clk_hw_gate2("pre2", "pre_axi", base + 0x80, 20); |
| hws[IMX6QDL_CLK_PRE3] = imx_clk_hw_gate2("pre3", "pre_axi", base + 0x80, 22); |
| hws[IMX6QDL_CLK_PRG0_AXI] = imx_clk_hw_gate2_shared("prg0_axi", "ipu1_podf", base + 0x80, 24, &share_count_prg0); |
| hws[IMX6QDL_CLK_PRG1_AXI] = imx_clk_hw_gate2_shared("prg1_axi", "ipu2_podf", base + 0x80, 26, &share_count_prg1); |
| hws[IMX6QDL_CLK_PRG0_APB] = imx_clk_hw_gate2_shared("prg0_apb", "ipg", base + 0x80, 24, &share_count_prg0); |
| hws[IMX6QDL_CLK_PRG1_APB] = imx_clk_hw_gate2_shared("prg1_apb", "ipg", base + 0x80, 26, &share_count_prg1); |
| } |
| hws[IMX6QDL_CLK_CKO1] = imx_clk_hw_gate("cko1", "cko1_podf", base + 0x60, 7); |
| hws[IMX6QDL_CLK_CKO2] = imx_clk_hw_gate("cko2", "cko2_podf", base + 0x60, 24); |
| |
| /* |
| * The gpt_3m clock is not available on i.MX6Q TO1.0. Let's point it |
| * to clock gpt_ipg_per to ease the gpt driver code. |
| */ |
| if (clk_on_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) |
| hws[IMX6QDL_CLK_GPT_3M] = hws[IMX6QDL_CLK_GPT_IPG_PER]; |
| |
| imx_check_clk_hws(hws, IMX6QDL_CLK_END); |
| |
| of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data); |
| |
| clk_hw_register_clkdev(hws[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL); |
| |
| clk_set_rate(hws[IMX6QDL_CLK_PLL3_PFD1_540M]->clk, 540000000); |
| if (clk_on_imx6dl()) |
| clk_set_parent(hws[IMX6QDL_CLK_IPU1_SEL]->clk, hws[IMX6QDL_CLK_PLL3_PFD1_540M]->clk); |
| |
| clk_set_parent(hws[IMX6QDL_CLK_IPU1_DI0_PRE_SEL]->clk, hws[IMX6QDL_CLK_PLL5_VIDEO_DIV]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_IPU1_DI1_PRE_SEL]->clk, hws[IMX6QDL_CLK_PLL5_VIDEO_DIV]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_IPU2_DI0_PRE_SEL]->clk, hws[IMX6QDL_CLK_PLL5_VIDEO_DIV]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_IPU2_DI1_PRE_SEL]->clk, hws[IMX6QDL_CLK_PLL5_VIDEO_DIV]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_IPU1_DI0_SEL]->clk, hws[IMX6QDL_CLK_IPU1_DI0_PRE]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_IPU1_DI1_SEL]->clk, hws[IMX6QDL_CLK_IPU1_DI1_PRE]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_IPU2_DI0_SEL]->clk, hws[IMX6QDL_CLK_IPU2_DI0_PRE]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_IPU2_DI1_SEL]->clk, hws[IMX6QDL_CLK_IPU2_DI1_PRE]->clk); |
| |
| /* |
| * The gpmi needs 100MHz frequency in the EDO/Sync mode, |
| * We can not get the 100MHz from the pll2_pfd0_352m. |
| * So choose pll2_pfd2_396m as enfc_sel's parent. |
| */ |
| clk_set_parent(hws[IMX6QDL_CLK_ENFC_SEL]->clk, hws[IMX6QDL_CLK_PLL2_PFD2_396M]->clk); |
| |
| if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { |
| clk_prepare_enable(hws[IMX6QDL_CLK_USBPHY1_GATE]->clk); |
| clk_prepare_enable(hws[IMX6QDL_CLK_USBPHY2_GATE]->clk); |
| } |
| |
| /* |
| * Let's initially set up CLKO with OSC24M, since this configuration |
| * is widely used by imx6q board designs to clock audio codec. |
| */ |
| ret = clk_set_parent(hws[IMX6QDL_CLK_CKO2_SEL]->clk, hws[IMX6QDL_CLK_OSC]->clk); |
| if (!ret) |
| ret = clk_set_parent(hws[IMX6QDL_CLK_CKO]->clk, hws[IMX6QDL_CLK_CKO2]->clk); |
| if (ret) |
| pr_warn("failed to set up CLKO: %d\n", ret); |
| |
| /* Audio-related clocks configuration */ |
| clk_set_parent(hws[IMX6QDL_CLK_SPDIF_SEL]->clk, hws[IMX6QDL_CLK_PLL3_PFD3_454M]->clk); |
| |
| /* All existing boards with PCIe use LVDS1 */ |
| if (IS_ENABLED(CONFIG_PCI_IMX6)) |
| clk_set_parent(hws[IMX6QDL_CLK_LVDS1_SEL]->clk, hws[IMX6QDL_CLK_SATA_REF_100M]->clk); |
| |
| /* |
| * Initialize the GPU clock muxes, so that the maximum specified clock |
| * rates for the respective SoC are not exceeded. |
| */ |
| if (clk_on_imx6dl()) { |
| clk_set_parent(hws[IMX6QDL_CLK_GPU3D_CORE_SEL]->clk, |
| hws[IMX6QDL_CLK_PLL2_PFD1_594M]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_GPU2D_CORE_SEL]->clk, |
| hws[IMX6QDL_CLK_PLL2_PFD1_594M]->clk); |
| } else if (clk_on_imx6q()) { |
| clk_set_parent(hws[IMX6QDL_CLK_GPU3D_CORE_SEL]->clk, |
| hws[IMX6QDL_CLK_MMDC_CH0_AXI]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_GPU3D_SHADER_SEL]->clk, |
| hws[IMX6QDL_CLK_PLL2_PFD1_594M]->clk); |
| clk_set_parent(hws[IMX6QDL_CLK_GPU2D_CORE_SEL]->clk, |
| hws[IMX6QDL_CLK_PLL3_USB_OTG]->clk); |
| } |
| |
| imx_register_uart_clocks(1); |
| } |
| CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init); |