blob: cfe0e5991d466cc654166858d9ccbc6159cc6242 [file] [log] [blame] [edit]
* NXP LPC32xx SoC Ethernet Controller
Required properties:
- compatible: Should be "nxp,lpc-eth"
- reg: Address and length of the register set for the device
- interrupts: Should contain ethernet controller interrupt
Optional properties:
- phy-mode: See ethernet.txt file in the same directory. If the property is
absent, "rmii" is assumed.
- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
Optional subnodes:
- mdio : specifies the mdio bus, used as a container for phy nodes according to
phy.txt in the same directory
Example:
mac: ethernet@31060000 {
compatible = "nxp,lpc-eth";
reg = <0x31060000 0x1000>;
interrupt-parent = <&mic>;
interrupts = <29 0>;
phy-mode = "rmii";
use-iram;
};