| // SPDX-License-Identifier: GPL-2.0+ OR MIT |
| /* |
| * Copyright 2014-2020 Toradex |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Toradex Colibri iMX6DL/S Module"; |
| compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_bl_on>; |
| pwms = <&pwm3 0 5000000>; |
| enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ |
| status = "disabled"; |
| }; |
| |
| reg_module_3v3: regulator-module-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "+V3.3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_module_3v3_audio: regulator-module-3v3-audio { |
| compatible = "regulator-fixed"; |
| regulator-name = "+V3.3_AUDIO"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_usb_host_vbus: regulator-usb-host-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; |
| regulator-name = "usb_host_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ |
| status = "disabled"; |
| }; |
| |
| sound { |
| compatible = "fsl,imx-audio-sgtl5000"; |
| model = "imx6dl-colibri-sgtl5000"; |
| ssi-controller = <&ssi1>; |
| audio-codec = <&codec>; |
| audio-routing = |
| "Headphone Jack", "HP_OUT", |
| "LINE_IN", "Line In Jack", |
| "MIC_IN", "Mic Jack", |
| "Mic Jack", "Mic Bias"; |
| mux-int-port = <1>; |
| mux-ext-port = <5>; |
| }; |
| |
| /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ |
| sound_spdif: sound-spdif { |
| compatible = "fsl,imx-audio-spdif"; |
| model = "imx-spdif"; |
| spdif-controller = <&spdif>; |
| spdif-in; |
| spdif-out; |
| status = "disabled"; |
| }; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>; |
| status = "okay"; |
| }; |
| |
| /* Optional on SODIMM 55/63 */ |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| status = "disabled"; |
| }; |
| |
| /* Optional on SODIMM 178/188 */ |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| status = "disabled"; |
| }; |
| |
| /* Colibri SSP */ |
| &ecspi4 { |
| cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi4>; |
| status = "disabled"; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rmii"; |
| phy-handle = <ðphy>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy: ethernet-phy@0 { |
| reg = <0>; |
| micrel,led-mode = <0>; |
| }; |
| }; |
| }; |
| |
| &hdmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hdmi_ddc>; |
| status = "disabled"; |
| }; |
| |
| /* |
| * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and |
| * touch screen controller |
| */ |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| pinctrl-0 = <&pinctrl_i2c2_gpio>; |
| scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| pmic: pfuze100@8 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* vgen1: unused */ |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| /* |
| * +V3.3_1.8_SD1 coming off VGEN3 and supplying |
| * the i.MX 6 NVCC_SD1. |
| */ |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| codec: sgtl5000@a { |
| compatible = "fsl,sgtl5000"; |
| reg = <0x0a>; |
| clocks = <&clks IMX6QDL_CLK_CKO>; |
| VDDA-supply = <®_module_3v3_audio>; |
| VDDIO-supply = <®_module_3v3>; |
| VDDD-supply = <&vgen4_reg>; |
| lrclk-strength = <3>; |
| }; |
| |
| /* STMPE811 touch screen controller */ |
| stmpe811@41 { |
| compatible = "st,stmpe811"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_touch_int>; |
| reg = <0x41>; |
| interrupts = <20 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-parent = <&gpio6>; |
| interrupt-controller; |
| id = <0>; |
| blocks = <0x5>; |
| irq-trigger = <0x1>; |
| /* 3.25 MHz ADC clock speed */ |
| st,adc-freq = <1>; |
| /* 12-bit ADC */ |
| st,mod-12b = <1>; |
| /* internal ADC reference */ |
| st,ref-sel = <0>; |
| /* ADC converstion time: 80 clocks */ |
| st,sample-time = <4>; |
| |
| stmpe_touchscreen { |
| compatible = "st,stmpe-ts"; |
| /* 8 sample average control */ |
| st,ave-ctrl = <3>; |
| /* 7 length fractional part in z */ |
| st,fraction-z = <7>; |
| /* |
| * 50 mA typical 80 mA max touchscreen drivers |
| * current limit value |
| */ |
| st,i-drive = <1>; |
| /* 1 ms panel driver settling time */ |
| st,settling = <3>; |
| /* 5 ms touch detect interrupt delay */ |
| st,touch-det-delay = <5>; |
| }; |
| |
| stmpe_adc { |
| compatible = "st,stmpe-adc"; |
| /* forbid to use ADC channels 3-0 (touch) */ |
| st,norequest-mask = <0x0F>; |
| }; |
| }; |
| }; |
| |
| /* |
| * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) |
| */ |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| pinctrl-1 = <&pinctrl_i2c3_gpio>; |
| scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "disabled"; |
| }; |
| |
| /* Colibri PWM<B> */ |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "disabled"; |
| }; |
| |
| /* Colibri PWM<D> */ |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| status = "disabled"; |
| }; |
| |
| /* Colibri PWM<A> */ |
| &pwm3 { |
| #pwm-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "disabled"; |
| }; |
| |
| /* Colibri PWM<C> */ |
| &pwm4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm4>; |
| status = "disabled"; |
| }; |
| |
| /* Optional S/PDIF out on SODIMM 137 */ |
| &spdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif>; |
| status = "disabled"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| /* Colibri UART_A */ |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; |
| fsl,dte-mode; |
| uart-has-rtscts; |
| status = "disabled"; |
| }; |
| |
| /* Colibri UART_B */ |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2_dte>; |
| fsl,dte-mode; |
| uart-has-rtscts; |
| status = "disabled"; |
| }; |
| |
| /* Colibri UART_C */ |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3_dte>; |
| fsl,dte-mode; |
| status = "disabled"; |
| }; |
| |
| &usbotg { |
| disable-over-current; |
| dr_mode = "peripheral"; |
| status = "disabled"; |
| }; |
| |
| /* Colibri MMC */ |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; |
| cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ |
| disable-wp; |
| vqmmc-supply = <®_module_3v3>; |
| bus-width = <4>; |
| no-1-8-v; |
| status = "disabled"; |
| }; |
| |
| /* eMMC */ |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| vqmmc-supply = <®_module_3v3>; |
| bus-width = <8>; |
| no-1-8-v; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &weim { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_weim_sram &pinctrl_weim_cs0 |
| &pinctrl_weim_cs1 &pinctrl_weim_cs2 |
| &pinctrl_weim_rdnwr &pinctrl_weim_npwe>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbh_oc_1>; |
| |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 |
| MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 |
| MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 |
| MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 |
| /* SGTL5000 sys_mclk */ |
| MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 |
| >; |
| }; |
| |
| pinctrl_cam_mclk: cammclkgrp { |
| fsl,pins = < |
| /* Parallel Camera CAM sys_mclk */ |
| MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 |
| >; |
| }; |
| |
| pinctrl_ecspi4: ecspi4grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 |
| /* SPI CS */ |
| MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 |
| MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 |
| MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 |
| MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 |
| MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 |
| MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 |
| MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 |
| MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 |
| MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 |
| MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_gpio_bl_on: gpioblon { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpiokeys { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 |
| >; |
| }; |
| |
| pinctrl_hdmi_ddc: hdmiddcgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2_gpio: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 |
| MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3_gpio: i2c3gpiogrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 |
| MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */ |
| fsl,pins = < |
| MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0xb0b1 |
| MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0xb0b1 |
| MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0xb0b1 |
| MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0xb0b1 |
| MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0xb0b1 |
| MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0xb0b1 |
| MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0xb0b1 |
| MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0xb0b1 |
| MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0xb0b1 |
| MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 |
| MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 |
| /* Disable PWM pins on camera interface */ |
| MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 |
| MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 |
| >; |
| }; |
| |
| pinctrl_ipu1_lcdif: ipu1lcdifgrp { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xa1 |
| MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xa1 |
| MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0xa1 |
| MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0xa1 |
| MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xa1 |
| MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xa1 |
| MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xa1 |
| MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xa1 |
| MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xa1 |
| MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xa1 |
| MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xa1 |
| MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xa1 |
| MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xa1 |
| MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xa1 |
| MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xa1 |
| MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xa1 |
| MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xa1 |
| MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xa1 |
| MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xa1 |
| MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xa1 |
| MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xa1 |
| MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xa1 |
| >; |
| }; |
| |
| pinctrl_mic_gnd: gpiomicgnd { |
| fsl,pins = < |
| /* Controls Mic GND, PU or '1' pull Mic GND to GND */ |
| MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_mmc_cd: gpiommccd { |
| fsl,pins = < |
| MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 |
| MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 |
| MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 |
| >; |
| }; |
| |
| pinctrl_pwm4: pwm4grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { |
| fsl,pins = < |
| /* USBH_EN */ |
| MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f058 |
| >; |
| }; |
| |
| pinctrl_usbh_oc_1: usbhoc1grp { |
| fsl,pins = < |
| /* USBH_OC */ |
| MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_spdif: spdifgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_touch_int: gpiotouchintgrp { |
| fsl,pins = < |
| /* STMPE811 interrupt */ |
| MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart1_dce: uart1dcegrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| /* DTE mode */ |
| pinctrl_uart1_dte: uart1dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 |
| MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| /* Additional DTR, DSR, DCD */ |
| pinctrl_uart1_ctrl: uart1ctrlgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 |
| MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 |
| MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart2_dte: uart2dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 |
| MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart3_dte: uart3dtegrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usbc_det: usbcdetgrp { |
| fsl,pins = < |
| /* USBC_DET */ |
| MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 |
| /* USBC_DET_EN */ |
| MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 |
| /* USBC_DET_OVERWRITE */ |
| MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 |
| >; |
| }; |
| |
| pinctrl_usbc_id_1: usbc_id-1 { |
| fsl,pins = < |
| /* USBC_ID */ |
| MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 |
| MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 |
| MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 |
| MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 |
| MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 |
| MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
| MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
| MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
| MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
| /* eMMC reset */ |
| MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 |
| >; |
| }; |
| |
| pinctrl_weim_cs0: weimcs0grp { |
| fsl,pins = < |
| /* nEXT_CS0 */ |
| MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_weim_cs1: weimcs1grp { |
| fsl,pins = < |
| /* nEXT_CS1 */ |
| MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_weim_cs2: weimcs2grp { |
| fsl,pins = < |
| /* nEXT_CS2 */ |
| MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_weim_sram: weimsramgrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 |
| MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 |
| /* Data */ |
| MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 |
| MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 |
| MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 |
| /* Address */ |
| MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 |
| MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 |
| MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 |
| MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 |
| MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 |
| MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 |
| MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 |
| MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 |
| MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 |
| MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 |
| MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 |
| MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 |
| MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 |
| MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 |
| MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 |
| MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 |
| >; |
| }; |
| |
| pinctrl_weim_rdnwr: weimrdnwr { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 |
| MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 |
| >; |
| }; |
| |
| pinctrl_weim_npwe: weimnpwe { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 |
| MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 |
| >; |
| }; |
| |
| /* ADDRESS[16:18] [25] used as GPIO */ |
| pinctrl_weim_gpio_1: weimgpio-1 { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 |
| MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 |
| MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 |
| MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 |
| >; |
| }; |
| |
| /* ADDRESS[19:24] used as GPIO */ |
| pinctrl_weim_gpio_2: weimgpio-2 { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 |
| MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 |
| MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 |
| MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 |
| >; |
| }; |
| |
| /* DATA[16:31] used as GPIO */ |
| pinctrl_weim_gpio_3: weimgpio-3 { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 |
| MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 |
| MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 |
| MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 |
| MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 |
| MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 |
| MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 |
| MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 |
| MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 |
| MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 |
| MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 |
| MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 |
| MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 |
| MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 |
| >; |
| }; |
| |
| /* DQM[0:3] used as GPIO */ |
| pinctrl_weim_gpio_4: weimgpio-4 { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 |
| MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 |
| MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 |
| MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 |
| >; |
| }; |
| |
| /* RDY used as GPIO */ |
| pinctrl_weim_gpio_5: weimgpio-5 { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 |
| >; |
| }; |
| |
| /* ADDRESS[16] DATA[30] used as GPIO */ |
| pinctrl_weim_gpio_6: weimgpio-6 { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 |
| MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 |
| >; |
| }; |
| }; |
