arch/arm/boot/dts/omap4-mcpdm.dtsi

// SPDX-License-Identifier: GPL-2.0
/*
 * Common omap4 mcpdm configuration
 *
 * Only include this file if your board has pdmclk wired from the
 * pmic to ABE as mcpdm uses an external clock for the module.
 */

&omap4_pmx_core {
	mcpdm_pins: pinmux_mcpdm_pins {
		pinctrl-single,pins = <
		/* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */
		OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)

		/* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */
		OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)

		/* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */
		OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)

		/* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */
		OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)

		/* 0x4a10010e abe_clks.abe_clks ah26 */
		OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)
		>;
	};
};

&mcpdm_module {
	/*
	 * McPDM pads must be muxed at the interconnect target module
	 * level as the module on the SoC needs external clock from
	 * the PMIC
	 */
	pinctrl-names = "default";
	pinctrl-0 = <&mcpdm_pins>;
	status = "okay";
};

&mcpdm {
	clocks = <&twl6040>;
	clock-names = "pdmclk";
};