| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III | |
| * flexcop-misc.c - miscellaneous functions | |
| * see flexcop.c for copyright information | |
| */ | |
| #include "flexcop.h" | |
| void flexcop_determine_revision(struct flexcop_device *fc) | |
| { | |
| flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); | |
| switch (v.misc_204.Rev_N_sig_revision_hi) { | |
| case 0x2: | |
| deb_info("found a FlexCopII.\n"); | |
| fc->rev = FLEXCOP_II; | |
| break; | |
| case 0x3: | |
| deb_info("found a FlexCopIIb.\n"); | |
| fc->rev = FLEXCOP_IIB; | |
| break; | |
| case 0x0: | |
| deb_info("found a FlexCopIII.\n"); | |
| fc->rev = FLEXCOP_III; | |
| break; | |
| default: | |
| err("unknown FlexCop Revision: %x. Please report this to linux-dvb@linuxtv.org.", | |
| v.misc_204.Rev_N_sig_revision_hi); | |
| break; | |
| } | |
| if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps)) | |
| deb_info("this FlexCop has the additional 32 hardware pid filter.\n"); | |
| else | |
| deb_info("this FlexCop has the 6 basic main hardware pid filter.\n"); | |
| /* bus parts have to decide if hw pid filtering is used or not. */ | |
| } | |
| static const char *flexcop_revision_names[] = { | |
| "Unknown chip", | |
| "FlexCopII", | |
| "FlexCopIIb", | |
| "FlexCopIII", | |
| }; | |
| static const char *flexcop_device_names[] = { | |
| [FC_UNK] = "Unknown device", | |
| [FC_CABLE] = "Cable2PC/CableStar 2 DVB-C", | |
| [FC_AIR_DVBT] = "Air2PC/AirStar 2 DVB-T", | |
| [FC_AIR_ATSC1] = "Air2PC/AirStar 2 ATSC 1st generation", | |
| [FC_AIR_ATSC2] = "Air2PC/AirStar 2 ATSC 2nd generation", | |
| [FC_AIR_ATSC3] = "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)", | |
| [FC_SKY_REV23] = "Sky2PC/SkyStar 2 DVB-S rev 2.3 (old version)", | |
| [FC_SKY_REV26] = "Sky2PC/SkyStar 2 DVB-S rev 2.6", | |
| [FC_SKY_REV27] = "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u", | |
| [FC_SKY_REV28] = "Sky2PC/SkyStar 2 DVB-S rev 2.8", | |
| [FC_SKYS2_REV33] = "Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3", | |
| }; | |
| static const char *flexcop_bus_names[] = { | |
| "USB", | |
| "PCI", | |
| }; | |
| void flexcop_device_name(struct flexcop_device *fc, | |
| const char *prefix, const char *suffix) | |
| { | |
| info("%s '%s' at the '%s' bus controlled by a '%s' %s", | |
| prefix, flexcop_device_names[fc->dev_type], | |
| flexcop_bus_names[fc->bus_type], | |
| flexcop_revision_names[fc->rev], suffix); | |
| } | |
| void flexcop_dump_reg(struct flexcop_device *fc, | |
| flexcop_ibi_register reg, int num) | |
| { | |
| flexcop_ibi_value v; | |
| int i; | |
| for (i = 0; i < num; i++) { | |
| v = fc->read_ibi_reg(fc, reg+4*i); | |
| deb_rdump("0x%03x: %08x, ", reg+4*i, v.raw); | |
| } | |
| deb_rdump("\n"); | |
| } | |
| EXPORT_SYMBOL(flexcop_dump_reg); |