| /* | |
| * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III | |
| * flexcop.c - main module part | |
| * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@posteo.de> | |
| * based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc | |
| * | |
| * Acknowledgements: | |
| * John Jurrius from BBTI, Inc. for extensive support | |
| * with code examples and data books | |
| * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting) | |
| * | |
| * Contributions to the skystar2-driver have been done by | |
| * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes) | |
| * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code) | |
| * Uwe Bugla, uwe.bugla at gmx.de (doing tests, restyling code, writing docu) | |
| * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac | |
| * filtering) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU Lesser General Public License | |
| * as published by the Free Software Foundation; either version 2.1 | |
| * of the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include "flexcop.h" | |
| #define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip" | |
| #define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@posteo.de" | |
| #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG | |
| #define DEBSTATUS "" | |
| #else | |
| #define DEBSTATUS " (debugging is not enabled)" | |
| #endif | |
| int b2c2_flexcop_debug; | |
| EXPORT_SYMBOL_GPL(b2c2_flexcop_debug); | |
| module_param_named(debug, b2c2_flexcop_debug, int, 0644); | |
| MODULE_PARM_DESC(debug, | |
| "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg,64=i2cdump (|-able))." | |
| DEBSTATUS); | |
| #undef DEBSTATUS | |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); | |
| /* global zero for ibi values */ | |
| flexcop_ibi_value ibi_zero; | |
| static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) | |
| { | |
| struct flexcop_device *fc = dvbdmxfeed->demux->priv; | |
| return flexcop_pid_feed_control(fc, dvbdmxfeed, 1); | |
| } | |
| static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) | |
| { | |
| struct flexcop_device *fc = dvbdmxfeed->demux->priv; | |
| return flexcop_pid_feed_control(fc, dvbdmxfeed, 0); | |
| } | |
| static int flexcop_dvb_init(struct flexcop_device *fc) | |
| { | |
| int ret = dvb_register_adapter(&fc->dvb_adapter, | |
| "FlexCop Digital TV device", fc->owner, | |
| fc->dev, adapter_nr); | |
| if (ret < 0) { | |
| err("error registering DVB adapter"); | |
| return ret; | |
| } | |
| fc->dvb_adapter.priv = fc; | |
| fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | |
| | DMX_MEMORY_BASED_FILTERING); | |
| fc->demux.priv = fc; | |
| fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED; | |
| fc->demux.start_feed = flexcop_dvb_start_feed; | |
| fc->demux.stop_feed = flexcop_dvb_stop_feed; | |
| fc->demux.write_to_decoder = NULL; | |
| ret = dvb_dmx_init(&fc->demux); | |
| if (ret < 0) { | |
| err("dvb_dmx failed: error %d", ret); | |
| goto err_dmx; | |
| } | |
| fc->hw_frontend.source = DMX_FRONTEND_0; | |
| fc->dmxdev.filternum = fc->demux.feednum; | |
| fc->dmxdev.demux = &fc->demux.dmx; | |
| fc->dmxdev.capabilities = 0; | |
| ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter); | |
| if (ret < 0) { | |
| err("dvb_dmxdev_init failed: error %d", ret); | |
| goto err_dmx_dev; | |
| } | |
| ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend); | |
| if (ret < 0) { | |
| err("adding hw_frontend to dmx failed: error %d", ret); | |
| goto err_dmx_add_hw_frontend; | |
| } | |
| fc->mem_frontend.source = DMX_MEMORY_FE; | |
| ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend); | |
| if (ret < 0) { | |
| err("adding mem_frontend to dmx failed: error %d", ret); | |
| goto err_dmx_add_mem_frontend; | |
| } | |
| ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend); | |
| if (ret < 0) { | |
| err("connect frontend failed: error %d", ret); | |
| goto err_connect_frontend; | |
| } | |
| ret = dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx); | |
| if (ret < 0) { | |
| err("dvb_net_init failed: error %d", ret); | |
| goto err_net; | |
| } | |
| fc->init_state |= FC_STATE_DVB_INIT; | |
| return 0; | |
| err_net: | |
| fc->demux.dmx.disconnect_frontend(&fc->demux.dmx); | |
| err_connect_frontend: | |
| fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->mem_frontend); | |
| err_dmx_add_mem_frontend: | |
| fc->demux.dmx.remove_frontend(&fc->demux.dmx, &fc->hw_frontend); | |
| err_dmx_add_hw_frontend: | |
| dvb_dmxdev_release(&fc->dmxdev); | |
| err_dmx_dev: | |
| dvb_dmx_release(&fc->demux); | |
| err_dmx: | |
| dvb_unregister_adapter(&fc->dvb_adapter); | |
| return ret; | |
| } | |
| static void flexcop_dvb_exit(struct flexcop_device *fc) | |
| { | |
| if (fc->init_state & FC_STATE_DVB_INIT) { | |
| dvb_net_release(&fc->dvbnet); | |
| fc->demux.dmx.close(&fc->demux.dmx); | |
| fc->demux.dmx.remove_frontend(&fc->demux.dmx, | |
| &fc->mem_frontend); | |
| fc->demux.dmx.remove_frontend(&fc->demux.dmx, | |
| &fc->hw_frontend); | |
| dvb_dmxdev_release(&fc->dmxdev); | |
| dvb_dmx_release(&fc->demux); | |
| dvb_unregister_adapter(&fc->dvb_adapter); | |
| deb_info("deinitialized dvb stuff\n"); | |
| } | |
| fc->init_state &= ~FC_STATE_DVB_INIT; | |
| } | |
| /* these methods are necessary to achieve the long-term-goal of hiding the | |
| * struct flexcop_device from the bus-parts */ | |
| void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len) | |
| { | |
| dvb_dmx_swfilter(&fc->demux, buf, len); | |
| } | |
| EXPORT_SYMBOL(flexcop_pass_dmx_data); | |
| void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no) | |
| { | |
| dvb_dmx_swfilter_packets(&fc->demux, buf, no); | |
| } | |
| EXPORT_SYMBOL(flexcop_pass_dmx_packets); | |
| static void flexcop_reset(struct flexcop_device *fc) | |
| { | |
| flexcop_ibi_value v210, v204; | |
| /* reset the flexcop itself */ | |
| fc->write_ibi_reg(fc,ctrl_208,ibi_zero); | |
| v210.raw = 0; | |
| v210.sw_reset_210.reset_block_000 = 1; | |
| v210.sw_reset_210.reset_block_100 = 1; | |
| v210.sw_reset_210.reset_block_200 = 1; | |
| v210.sw_reset_210.reset_block_300 = 1; | |
| v210.sw_reset_210.reset_block_400 = 1; | |
| v210.sw_reset_210.reset_block_500 = 1; | |
| v210.sw_reset_210.reset_block_600 = 1; | |
| v210.sw_reset_210.reset_block_700 = 1; | |
| v210.sw_reset_210.Block_reset_enable = 0xb2; | |
| v210.sw_reset_210.Special_controls = 0xc259; | |
| fc->write_ibi_reg(fc,sw_reset_210,v210); | |
| msleep(1); | |
| /* reset the periphical devices */ | |
| v204 = fc->read_ibi_reg(fc,misc_204); | |
| v204.misc_204.Per_reset_sig = 0; | |
| fc->write_ibi_reg(fc,misc_204,v204); | |
| msleep(1); | |
| v204.misc_204.Per_reset_sig = 1; | |
| fc->write_ibi_reg(fc,misc_204,v204); | |
| } | |
| void flexcop_reset_block_300(struct flexcop_device *fc) | |
| { | |
| flexcop_ibi_value v208_save = fc->read_ibi_reg(fc, ctrl_208), | |
| v210 = fc->read_ibi_reg(fc, sw_reset_210); | |
| deb_rdump("208: %08x, 210: %08x\n", v208_save.raw, v210.raw); | |
| fc->write_ibi_reg(fc,ctrl_208,ibi_zero); | |
| v210.sw_reset_210.reset_block_300 = 1; | |
| v210.sw_reset_210.Block_reset_enable = 0xb2; | |
| fc->write_ibi_reg(fc,sw_reset_210,v210); | |
| fc->write_ibi_reg(fc,ctrl_208,v208_save); | |
| } | |
| struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) | |
| { | |
| void *bus; | |
| struct flexcop_device *fc = kzalloc(sizeof(struct flexcop_device), | |
| GFP_KERNEL); | |
| if (!fc) { | |
| err("no memory"); | |
| return NULL; | |
| } | |
| bus = kzalloc(bus_specific_len, GFP_KERNEL); | |
| if (!bus) { | |
| err("no memory"); | |
| kfree(fc); | |
| return NULL; | |
| } | |
| fc->bus_specific = bus; | |
| return fc; | |
| } | |
| EXPORT_SYMBOL(flexcop_device_kmalloc); | |
| void flexcop_device_kfree(struct flexcop_device *fc) | |
| { | |
| kfree(fc->bus_specific); | |
| kfree(fc); | |
| } | |
| EXPORT_SYMBOL(flexcop_device_kfree); | |
| int flexcop_device_initialize(struct flexcop_device *fc) | |
| { | |
| int ret; | |
| ibi_zero.raw = 0; | |
| flexcop_reset(fc); | |
| flexcop_determine_revision(fc); | |
| flexcop_sram_init(fc); | |
| flexcop_hw_filter_init(fc); | |
| flexcop_smc_ctrl(fc, 0); | |
| ret = flexcop_dvb_init(fc); | |
| if (ret) | |
| goto error; | |
| /* i2c has to be done before doing EEProm stuff - | |
| * because the EEProm is accessed via i2c */ | |
| ret = flexcop_i2c_init(fc); | |
| if (ret) | |
| goto error; | |
| /* do the MAC address reading after initializing the dvb_adapter */ | |
| if (fc->get_mac_addr(fc, 0) == 0) { | |
| u8 *b = fc->dvb_adapter.proposed_mac; | |
| info("MAC address = %pM", b); | |
| flexcop_set_mac_filter(fc,b); | |
| flexcop_mac_filter_ctrl(fc,1); | |
| } else | |
| warn("reading of MAC address failed.\n"); | |
| ret = flexcop_frontend_init(fc); | |
| if (ret) | |
| goto error; | |
| flexcop_device_name(fc,"initialization of","complete"); | |
| return 0; | |
| error: | |
| flexcop_device_exit(fc); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(flexcop_device_initialize); | |
| void flexcop_device_exit(struct flexcop_device *fc) | |
| { | |
| flexcop_frontend_exit(fc); | |
| flexcop_i2c_exit(fc); | |
| flexcop_dvb_exit(fc); | |
| } | |
| EXPORT_SYMBOL(flexcop_device_exit); | |
| static int flexcop_module_init(void) | |
| { | |
| info(DRIVER_NAME " loaded successfully"); | |
| return 0; | |
| } | |
| static void flexcop_module_cleanup(void) | |
| { | |
| info(DRIVER_NAME " unloaded successfully"); | |
| } | |
| module_init(flexcop_module_init); | |
| module_exit(flexcop_module_cleanup); | |
| MODULE_AUTHOR(DRIVER_AUTHOR); | |
| MODULE_DESCRIPTION(DRIVER_NAME); | |
| MODULE_LICENSE("GPL"); |