| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Sharp VA3A5JZ921 One Seg Broadcast Module driver | |
| * This device is labeled as just S. 921 at the top of the frontend can | |
| * | |
| * Copyright (C) 2009-2010 Mauro Carvalho Chehab | |
| * Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com> | |
| * | |
| * Developed for Leadership SBTVD 1seg device sold in Brazil | |
| * | |
| * Frontend module based on cx24123 driver, getting some info from | |
| * the old s921 driver. | |
| * | |
| * FIXME: Need to port to DVB v5.2 API | |
| */ | |
| #include <linux/kernel.h> | |
| #include <asm/div64.h> | |
| #include <media/dvb_frontend.h> | |
| #include "s921.h" | |
| static int debug = 1; | |
| module_param(debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); | |
| #define rc(args...) do { \ | |
| printk(KERN_ERR "s921: " args); \ | |
| } while (0) | |
| #define dprintk(args...) \ | |
| do { \ | |
| if (debug) { \ | |
| printk(KERN_DEBUG "s921: %s: ", __func__); \ | |
| printk(args); \ | |
| } \ | |
| } while (0) | |
| struct s921_state { | |
| struct i2c_adapter *i2c; | |
| const struct s921_config *config; | |
| struct dvb_frontend frontend; | |
| /* The Demod can't easily provide these, we cache them */ | |
| u32 currentfreq; | |
| }; | |
| /* | |
| * Various tuner defaults need to be established for a given frequency kHz. | |
| * fixme: The bounds on the bands do not match the doc in real life. | |
| * fixme: Some of them have been moved, other might need adjustment. | |
| */ | |
| static struct s921_bandselect_val { | |
| u32 freq_low; | |
| u8 band_reg; | |
| } s921_bandselect[] = { | |
| { 0, 0x7b }, | |
| { 485140000, 0x5b }, | |
| { 515140000, 0x3b }, | |
| { 545140000, 0x1b }, | |
| { 599140000, 0xfb }, | |
| { 623140000, 0xdb }, | |
| { 659140000, 0xbb }, | |
| { 713140000, 0x9b }, | |
| }; | |
| struct regdata { | |
| u8 reg; | |
| u8 data; | |
| }; | |
| static struct regdata s921_init[] = { | |
| { 0x01, 0x80 }, /* Probably, a reset sequence */ | |
| { 0x01, 0x40 }, | |
| { 0x01, 0x80 }, | |
| { 0x01, 0x40 }, | |
| { 0x02, 0x00 }, | |
| { 0x03, 0x40 }, | |
| { 0x04, 0x01 }, | |
| { 0x05, 0x00 }, | |
| { 0x06, 0x00 }, | |
| { 0x07, 0x00 }, | |
| { 0x08, 0x00 }, | |
| { 0x09, 0x00 }, | |
| { 0x0a, 0x00 }, | |
| { 0x0b, 0x5a }, | |
| { 0x0c, 0x00 }, | |
| { 0x0d, 0x00 }, | |
| { 0x0f, 0x00 }, | |
| { 0x13, 0x1b }, | |
| { 0x14, 0x80 }, | |
| { 0x15, 0x40 }, | |
| { 0x17, 0x70 }, | |
| { 0x18, 0x01 }, | |
| { 0x19, 0x12 }, | |
| { 0x1a, 0x01 }, | |
| { 0x1b, 0x12 }, | |
| { 0x1c, 0xa0 }, | |
| { 0x1d, 0x00 }, | |
| { 0x1e, 0x0a }, | |
| { 0x1f, 0x08 }, | |
| { 0x20, 0x40 }, | |
| { 0x21, 0xff }, | |
| { 0x22, 0x4c }, | |
| { 0x23, 0x4e }, | |
| { 0x24, 0x4c }, | |
| { 0x25, 0x00 }, | |
| { 0x26, 0x00 }, | |
| { 0x27, 0xf4 }, | |
| { 0x28, 0x60 }, | |
| { 0x29, 0x88 }, | |
| { 0x2a, 0x40 }, | |
| { 0x2b, 0x40 }, | |
| { 0x2c, 0xff }, | |
| { 0x2d, 0x00 }, | |
| { 0x2e, 0xff }, | |
| { 0x2f, 0x00 }, | |
| { 0x30, 0x20 }, | |
| { 0x31, 0x06 }, | |
| { 0x32, 0x0c }, | |
| { 0x34, 0x0f }, | |
| { 0x37, 0xfe }, | |
| { 0x38, 0x00 }, | |
| { 0x39, 0x63 }, | |
| { 0x3a, 0x10 }, | |
| { 0x3b, 0x10 }, | |
| { 0x47, 0x00 }, | |
| { 0x49, 0xe5 }, | |
| { 0x4b, 0x00 }, | |
| { 0x50, 0xc0 }, | |
| { 0x52, 0x20 }, | |
| { 0x54, 0x5a }, | |
| { 0x55, 0x5b }, | |
| { 0x56, 0x40 }, | |
| { 0x57, 0x70 }, | |
| { 0x5c, 0x50 }, | |
| { 0x5d, 0x00 }, | |
| { 0x62, 0x17 }, | |
| { 0x63, 0x2f }, | |
| { 0x64, 0x6f }, | |
| { 0x68, 0x00 }, | |
| { 0x69, 0x89 }, | |
| { 0x6a, 0x00 }, | |
| { 0x6b, 0x00 }, | |
| { 0x6c, 0x00 }, | |
| { 0x6d, 0x00 }, | |
| { 0x6e, 0x00 }, | |
| { 0x70, 0x10 }, | |
| { 0x71, 0x00 }, | |
| { 0x75, 0x00 }, | |
| { 0x76, 0x30 }, | |
| { 0x77, 0x01 }, | |
| { 0xaf, 0x00 }, | |
| { 0xb0, 0xa0 }, | |
| { 0xb2, 0x3d }, | |
| { 0xb3, 0x25 }, | |
| { 0xb4, 0x8b }, | |
| { 0xb5, 0x4b }, | |
| { 0xb6, 0x3f }, | |
| { 0xb7, 0xff }, | |
| { 0xb8, 0xff }, | |
| { 0xb9, 0xfc }, | |
| { 0xba, 0x00 }, | |
| { 0xbb, 0x00 }, | |
| { 0xbc, 0x00 }, | |
| { 0xd0, 0x30 }, | |
| { 0xe4, 0x84 }, | |
| { 0xf0, 0x48 }, | |
| { 0xf1, 0x19 }, | |
| { 0xf2, 0x5a }, | |
| { 0xf3, 0x8e }, | |
| { 0xf4, 0x2d }, | |
| { 0xf5, 0x07 }, | |
| { 0xf6, 0x5a }, | |
| { 0xf7, 0xba }, | |
| { 0xf8, 0xd7 }, | |
| }; | |
| static struct regdata s921_prefreq[] = { | |
| { 0x47, 0x60 }, | |
| { 0x68, 0x00 }, | |
| { 0x69, 0x89 }, | |
| { 0xf0, 0x48 }, | |
| { 0xf1, 0x19 }, | |
| }; | |
| static struct regdata s921_postfreq[] = { | |
| { 0xf5, 0xae }, | |
| { 0xf6, 0xb7 }, | |
| { 0xf7, 0xba }, | |
| { 0xf8, 0xd7 }, | |
| { 0x68, 0x0a }, | |
| { 0x69, 0x09 }, | |
| }; | |
| static int s921_i2c_writereg(struct s921_state *state, | |
| u8 i2c_addr, int reg, int data) | |
| { | |
| u8 buf[] = { reg, data }; | |
| struct i2c_msg msg = { | |
| .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2 | |
| }; | |
| int rc; | |
| rc = i2c_transfer(state->i2c, &msg, 1); | |
| if (rc != 1) { | |
| printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n", | |
| __func__, rc, reg, data); | |
| return rc; | |
| } | |
| return 0; | |
| } | |
| static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr, | |
| struct regdata *rd, int size) | |
| { | |
| int i, rc; | |
| for (i = 0; i < size; i++) { | |
| rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data); | |
| if (rc < 0) | |
| return rc; | |
| } | |
| return 0; | |
| } | |
| static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg) | |
| { | |
| u8 val; | |
| int rc; | |
| struct i2c_msg msg[] = { | |
| { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 }, | |
| { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 } | |
| }; | |
| rc = i2c_transfer(state->i2c, msg, 2); | |
| if (rc != 2) { | |
| rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc); | |
| return rc; | |
| } | |
| return val; | |
| } | |
| #define s921_readreg(state, reg) \ | |
| s921_i2c_readreg(state, state->config->demod_address, reg) | |
| #define s921_writereg(state, reg, val) \ | |
| s921_i2c_writereg(state, state->config->demod_address, reg, val) | |
| #define s921_writeregdata(state, regdata) \ | |
| s921_i2c_writeregdata(state, state->config->demod_address, \ | |
| regdata, ARRAY_SIZE(regdata)) | |
| static int s921_pll_tune(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; | |
| struct s921_state *state = fe->demodulator_priv; | |
| int band, rc, i; | |
| unsigned long f_offset; | |
| u8 f_switch; | |
| u64 offset; | |
| dprintk("frequency=%i\n", p->frequency); | |
| for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++) | |
| if (p->frequency < s921_bandselect[band].freq_low) | |
| break; | |
| band--; | |
| if (band < 0) { | |
| rc("%s: frequency out of range\n", __func__); | |
| return -EINVAL; | |
| } | |
| f_switch = s921_bandselect[band].band_reg; | |
| offset = ((u64)p->frequency) * 258; | |
| do_div(offset, 6000000); | |
| f_offset = ((unsigned long)offset) + 2321; | |
| rc = s921_writeregdata(state, s921_prefreq); | |
| if (rc < 0) | |
| return rc; | |
| rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff); | |
| if (rc < 0) | |
| return rc; | |
| rc = s921_writereg(state, 0xf3, f_offset & 0xff); | |
| if (rc < 0) | |
| return rc; | |
| rc = s921_writereg(state, 0xf4, f_switch); | |
| if (rc < 0) | |
| return rc; | |
| rc = s921_writeregdata(state, s921_postfreq); | |
| if (rc < 0) | |
| return rc; | |
| for (i = 0 ; i < 6; i++) { | |
| rc = s921_readreg(state, 0x80); | |
| dprintk("status 0x80: %02x\n", rc); | |
| } | |
| rc = s921_writereg(state, 0x01, 0x40); | |
| if (rc < 0) | |
| return rc; | |
| rc = s921_readreg(state, 0x01); | |
| dprintk("status 0x01: %02x\n", rc); | |
| rc = s921_readreg(state, 0x80); | |
| dprintk("status 0x80: %02x\n", rc); | |
| rc = s921_readreg(state, 0x80); | |
| dprintk("status 0x80: %02x\n", rc); | |
| rc = s921_readreg(state, 0x32); | |
| dprintk("status 0x32: %02x\n", rc); | |
| dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset); | |
| return 0; | |
| } | |
| static int s921_initfe(struct dvb_frontend *fe) | |
| { | |
| struct s921_state *state = fe->demodulator_priv; | |
| int rc; | |
| dprintk("\n"); | |
| rc = s921_writeregdata(state, s921_init); | |
| if (rc < 0) | |
| return rc; | |
| return 0; | |
| } | |
| static int s921_read_status(struct dvb_frontend *fe, enum fe_status *status) | |
| { | |
| struct s921_state *state = fe->demodulator_priv; | |
| int regstatus, rc; | |
| *status = 0; | |
| rc = s921_readreg(state, 0x81); | |
| if (rc < 0) | |
| return rc; | |
| regstatus = rc << 8; | |
| rc = s921_readreg(state, 0x82); | |
| if (rc < 0) | |
| return rc; | |
| regstatus |= rc; | |
| dprintk("status = %04x\n", regstatus); | |
| /* Full Sync - We don't know what each bit means on regs 0x81/0x82 */ | |
| if ((regstatus & 0xff) == 0x40) { | |
| *status = FE_HAS_SIGNAL | | |
| FE_HAS_CARRIER | | |
| FE_HAS_VITERBI | | |
| FE_HAS_SYNC | | |
| FE_HAS_LOCK; | |
| } else if (regstatus & 0x40) { | |
| /* This is close to Full Sync, but not enough to get useful info */ | |
| *status = FE_HAS_SIGNAL | | |
| FE_HAS_CARRIER | | |
| FE_HAS_VITERBI | | |
| FE_HAS_SYNC; | |
| } | |
| return 0; | |
| } | |
| static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength) | |
| { | |
| enum fe_status status; | |
| struct s921_state *state = fe->demodulator_priv; | |
| int rc; | |
| /* FIXME: Use the proper register for it... 0x80? */ | |
| rc = s921_read_status(fe, &status); | |
| if (rc < 0) | |
| return rc; | |
| *strength = (status & FE_HAS_LOCK) ? 0xffff : 0; | |
| dprintk("strength = 0x%04x\n", *strength); | |
| rc = s921_readreg(state, 0x01); | |
| dprintk("status 0x01: %02x\n", rc); | |
| rc = s921_readreg(state, 0x80); | |
| dprintk("status 0x80: %02x\n", rc); | |
| rc = s921_readreg(state, 0x32); | |
| dprintk("status 0x32: %02x\n", rc); | |
| return 0; | |
| } | |
| static int s921_set_frontend(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; | |
| struct s921_state *state = fe->demodulator_priv; | |
| int rc; | |
| dprintk("\n"); | |
| /* FIXME: We don't know how to use non-auto mode */ | |
| rc = s921_pll_tune(fe); | |
| if (rc < 0) | |
| return rc; | |
| state->currentfreq = p->frequency; | |
| return 0; | |
| } | |
| static int s921_get_frontend(struct dvb_frontend *fe, | |
| struct dtv_frontend_properties *p) | |
| { | |
| struct s921_state *state = fe->demodulator_priv; | |
| /* FIXME: Probably it is possible to get it from regs f1 and f2 */ | |
| p->frequency = state->currentfreq; | |
| p->delivery_system = SYS_ISDBT; | |
| return 0; | |
| } | |
| static int s921_tune(struct dvb_frontend *fe, | |
| bool re_tune, | |
| unsigned int mode_flags, | |
| unsigned int *delay, | |
| enum fe_status *status) | |
| { | |
| int rc = 0; | |
| dprintk("\n"); | |
| if (re_tune) | |
| rc = s921_set_frontend(fe); | |
| if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) | |
| s921_read_status(fe, status); | |
| return rc; | |
| } | |
| static enum dvbfe_algo s921_get_algo(struct dvb_frontend *fe) | |
| { | |
| return DVBFE_ALGO_HW; | |
| } | |
| static void s921_release(struct dvb_frontend *fe) | |
| { | |
| struct s921_state *state = fe->demodulator_priv; | |
| dprintk("\n"); | |
| kfree(state); | |
| } | |
| static const struct dvb_frontend_ops s921_ops; | |
| struct dvb_frontend *s921_attach(const struct s921_config *config, | |
| struct i2c_adapter *i2c) | |
| { | |
| /* allocate memory for the internal state */ | |
| struct s921_state *state = | |
| kzalloc(sizeof(struct s921_state), GFP_KERNEL); | |
| dprintk("\n"); | |
| if (!state) { | |
| rc("Unable to kzalloc\n"); | |
| return NULL; | |
| } | |
| /* setup the state */ | |
| state->config = config; | |
| state->i2c = i2c; | |
| /* create dvb_frontend */ | |
| memcpy(&state->frontend.ops, &s921_ops, | |
| sizeof(struct dvb_frontend_ops)); | |
| state->frontend.demodulator_priv = state; | |
| return &state->frontend; | |
| } | |
| EXPORT_SYMBOL(s921_attach); | |
| static const struct dvb_frontend_ops s921_ops = { | |
| .delsys = { SYS_ISDBT }, | |
| /* Use dib8000 values per default */ | |
| .info = { | |
| .name = "Sharp S921", | |
| .frequency_min_hz = 470 * MHz, | |
| /* | |
| * Max should be 770MHz instead, according with Sharp docs, | |
| * but Leadership doc says it works up to 806 MHz. This is | |
| * required to get channel 69, used in Brazil | |
| */ | |
| .frequency_max_hz = 806 * MHz, | |
| .caps = FE_CAN_INVERSION_AUTO | | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | | |
| FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | | |
| FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | | |
| FE_CAN_HIERARCHY_AUTO, | |
| }, | |
| .release = s921_release, | |
| .init = s921_initfe, | |
| .set_frontend = s921_set_frontend, | |
| .get_frontend = s921_get_frontend, | |
| .read_status = s921_read_status, | |
| .read_signal_strength = s921_read_signal_strength, | |
| .tune = s921_tune, | |
| .get_frontend_algo = s921_get_algo, | |
| }; | |
| MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware"); | |
| MODULE_AUTHOR("Mauro Carvalho Chehab"); | |
| MODULE_AUTHOR("Douglas Landgraf <dougsland@redhat.com>"); | |
| MODULE_LICENSE("GPL"); |