| # SPDX-License-Identifier: GPL-2.0-only | |
| # | |
| # Platform drivers | |
| # Most drivers here are currently for webcam support | |
| menuconfig V4L_PLATFORM_DRIVERS | |
| bool "V4L platform devices" | |
| help | |
| Say Y here to enable support for platform-specific V4L drivers. | |
| if V4L_PLATFORM_DRIVERS | |
| source "drivers/media/platform/marvell-ccic/Kconfig" | |
| config VIDEO_VIA_CAMERA | |
| tristate "VIAFB camera controller support" | |
| depends on FB_VIA && VIDEO_V4L2 | |
| select VIDEOBUF2_DMA_SG | |
| select VIDEO_OV7670 | |
| help | |
| Driver support for the integrated camera controller in VIA | |
| Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems | |
| with ov7670 sensors. | |
| # | |
| # Platform multimedia device configuration | |
| # | |
| source "drivers/media/platform/cadence/Kconfig" | |
| source "drivers/media/platform/davinci/Kconfig" | |
| source "drivers/media/platform/omap/Kconfig" | |
| config VIDEO_ASPEED | |
| tristate "Aspeed AST2400 and AST2500 Video Engine driver" | |
| depends on VIDEO_V4L2 | |
| select VIDEOBUF2_DMA_CONTIG | |
| help | |
| Support for the Aspeed Video Engine (VE) embedded in the Aspeed | |
| AST2400 and AST2500 SOCs. The VE can capture and compress video data | |
| from digital or analog sources. | |
| config VIDEO_SH_VOU | |
| tristate "SuperH VOU video output driver" | |
| depends on VIDEO_DEV && I2C | |
| depends on ARCH_SHMOBILE || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| help | |
| Support for the Video Output Unit (VOU) on SuperH SoCs. | |
| config VIDEO_VIU | |
| tristate "Freescale VIU Video Driver" | |
| depends on VIDEO_V4L2 && (PPC_MPC512x || COMPILE_TEST) && I2C | |
| select VIDEOBUF_DMA_CONTIG | |
| default y | |
| help | |
| Support for Freescale VIU video driver. This device captures | |
| video data, or overlays video on DIU frame buffer. | |
| Say Y here if you want to enable VIU device on MPC5121e Rev2+. | |
| In doubt, say N. | |
| config VIDEO_MUX | |
| tristate "Video Multiplexer" | |
| select MULTIPLEXER | |
| depends on VIDEO_V4L2 && OF | |
| select MEDIA_CONTROLLER | |
| select VIDEO_V4L2_SUBDEV_API | |
| select REGMAP | |
| select V4L2_FWNODE | |
| help | |
| This driver provides support for N:1 video bus multiplexers. | |
| config VIDEO_OMAP3 | |
| tristate "OMAP 3 Camera support" | |
| depends on VIDEO_V4L2 && I2C | |
| depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST | |
| depends on COMMON_CLK && OF | |
| select ARM_DMA_USE_IOMMU if OMAP_IOMMU | |
| select MEDIA_CONTROLLER | |
| select VIDEO_V4L2_SUBDEV_API | |
| select VIDEOBUF2_DMA_CONTIG | |
| select MFD_SYSCON | |
| select V4L2_FWNODE | |
| help | |
| Driver for an OMAP 3 camera controller. | |
| config VIDEO_OMAP3_DEBUG | |
| bool "OMAP 3 Camera debug messages" | |
| depends on VIDEO_OMAP3 | |
| help | |
| Enable debug messages on OMAP 3 camera controller driver. | |
| config VIDEO_PXA27x | |
| tristate "PXA27x Quick Capture Interface driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on PXA27x || COMPILE_TEST | |
| select VIDEOBUF2_DMA_SG | |
| select SG_SPLIT | |
| select V4L2_FWNODE | |
| help | |
| This is a v4l2 driver for the PXA27x Quick Capture Interface | |
| config VIDEO_QCOM_CAMSS | |
| tristate "Qualcomm V4L2 Camera Subsystem driver" | |
| depends on VIDEO_V4L2 | |
| depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST | |
| select MEDIA_CONTROLLER | |
| select VIDEO_V4L2_SUBDEV_API | |
| select VIDEOBUF2_DMA_SG | |
| select V4L2_FWNODE | |
| config VIDEO_S3C_CAMIF | |
| tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" | |
| depends on VIDEO_V4L2 && I2C && PM | |
| depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST | |
| select MEDIA_CONTROLLER | |
| select VIDEO_V4L2_SUBDEV_API | |
| select VIDEOBUF2_DMA_CONTIG | |
| help | |
| This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera | |
| host interface (CAMIF). | |
| To compile this driver as a module, choose M here: the module | |
| will be called s3c-camif. | |
| config VIDEO_STM32_DCMI | |
| tristate "STM32 Digital Camera Memory Interface (DCMI) support" | |
| depends on VIDEO_V4L2 && OF | |
| depends on ARCH_STM32 || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select MEDIA_CONTROLLER | |
| select V4L2_FWNODE | |
| help | |
| This module makes the STM32 Digital Camera Memory Interface (DCMI) | |
| available as a v4l2 device. | |
| To compile this driver as a module, choose M here: the module | |
| will be called stm32-dcmi. | |
| config VIDEO_RENESAS_CEU | |
| tristate "Renesas Capture Engine Unit (CEU) driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_FWNODE | |
| help | |
| This is a v4l2 driver for the Renesas CEU Interface | |
| source "drivers/media/platform/exynos4-is/Kconfig" | |
| source "drivers/media/platform/am437x/Kconfig" | |
| source "drivers/media/platform/xilinx/Kconfig" | |
| source "drivers/media/platform/rcar-vin/Kconfig" | |
| source "drivers/media/platform/atmel/Kconfig" | |
| source "drivers/media/platform/sunxi/Kconfig" | |
| config VIDEO_TI_CAL | |
| tristate "TI CAL (Camera Adaptation Layer) driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| select MEDIA_CONTROLLER | |
| select VIDEO_V4L2_SUBDEV_API | |
| depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_FWNODE | |
| help | |
| Support for the TI CAL (Camera Adaptation Layer) block | |
| found on DRA72X SoC. | |
| In TI Technical Reference Manual this module is referred as | |
| Camera Interface Subsystem (CAMSS). | |
| endif # V4L_PLATFORM_DRIVERS | |
| menuconfig V4L_MEM2MEM_DRIVERS | |
| bool "Memory-to-memory multimedia devices" | |
| depends on VIDEO_V4L2 | |
| help | |
| Say Y here to enable selecting drivers for V4L devices that | |
| use system memory for both source and destination buffers, as opposed | |
| to capture and output drivers, which use memory buffers for just | |
| one of those. | |
| if V4L_MEM2MEM_DRIVERS | |
| config VIDEO_CODA | |
| tristate "Chips&Media Coda multi-standard codec IP" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST) | |
| select SRAM | |
| select VIDEOBUF2_DMA_CONTIG | |
| select VIDEOBUF2_VMALLOC | |
| select V4L2_JPEG_HELPER | |
| select V4L2_MEM2MEM_DEV | |
| select GENERIC_ALLOCATOR | |
| help | |
| Coda is a range of video codec IPs that supports | |
| H.264, MPEG-4, and other video formats. | |
| config VIDEO_IMX_VDOA | |
| def_tristate VIDEO_CODA if SOC_IMX6Q || COMPILE_TEST | |
| config VIDEO_IMX_PXP | |
| tristate "i.MX Pixel Pipeline (PXP)" | |
| depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST) | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| The i.MX Pixel Pipeline is a memory-to-memory engine for scaling, | |
| color space conversion, and rotation. | |
| config VIDEO_MEDIATEK_JPEG | |
| tristate "Mediatek JPEG Codec driver" | |
| depends on MTK_IOMMU_V1 || MTK_IOMMU || COMPILE_TEST | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_MEDIATEK || COMPILE_TEST | |
| depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n) | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| Mediatek jpeg codec driver provides HW capability to decode | |
| JPEG format | |
| To compile this driver as a module, choose M here: the | |
| module will be called mtk-jpeg | |
| config VIDEO_MEDIATEK_VPU | |
| tristate "Mediatek Video Processor Unit" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_MEDIATEK || COMPILE_TEST | |
| help | |
| This driver provides downloading VPU firmware and | |
| communicating with VPU. This driver for hw video | |
| codec embedded in Mediatek's MT8173 SOCs. It is able | |
| to handle video decoding/encoding in a range of formats. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mtk-vpu. | |
| config VIDEO_MEDIATEK_MDP | |
| tristate "Mediatek MDP driver" | |
| depends on MTK_IOMMU || COMPILE_TEST | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_MEDIATEK || COMPILE_TEST | |
| depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n) | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| select VIDEO_MEDIATEK_VPU | |
| help | |
| It is a v4l2 driver and present in Mediatek MT8173 SoCs. | |
| The driver supports for scaling and color space conversion. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mtk-mdp. | |
| config VIDEO_MEDIATEK_VCODEC | |
| tristate "Mediatek Video Codec driver" | |
| depends on MTK_IOMMU || COMPILE_TEST | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_MEDIATEK || COMPILE_TEST | |
| depends on VIDEO_MEDIATEK_VPU || MTK_SCP | |
| # The two following lines ensure we have the same state ("m" or "y") as | |
| # our dependencies, to avoid missing symbols during link. | |
| depends on VIDEO_MEDIATEK_VPU || !VIDEO_MEDIATEK_VPU | |
| depends on MTK_SCP || !MTK_SCP | |
| depends on MTK_SMI || (COMPILE_TEST && MTK_SMI=n) | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| select VIDEO_MEDIATEK_VCODEC_VPU if VIDEO_MEDIATEK_VPU | |
| select VIDEO_MEDIATEK_VCODEC_SCP if MTK_SCP | |
| help | |
| Mediatek video codec driver provides HW capability to | |
| encode and decode in a range of video formats on MT8173 | |
| and MT8183. | |
| Note that support for MT8173 requires VIDEO_MEDIATEK_VPU to | |
| also be selected. Support for MT8183 depends on MTK_SCP. | |
| To compile this driver as modules, choose M here: the | |
| modules will be called mtk-vcodec-dec and mtk-vcodec-enc. | |
| config VIDEO_MEDIATEK_VCODEC_VPU | |
| bool | |
| config VIDEO_MEDIATEK_VCODEC_SCP | |
| bool | |
| config VIDEO_MEM2MEM_DEINTERLACE | |
| tristate "Deinterlace support" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on HAS_DMA | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| Generic deinterlacing V4L2 driver. | |
| config VIDEO_SAMSUNG_S5P_G2D | |
| tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D | |
| 2d graphics accelerator. | |
| config VIDEO_SAMSUNG_S5P_JPEG | |
| tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This is a v4l2 driver for Samsung S5P, EXYNOS3250 | |
| and EXYNOS4 JPEG codec | |
| config VIDEO_SAMSUNG_S5P_MFC | |
| tristate "Samsung S5P MFC Video Codec" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| help | |
| MFC 5.1 and 6.x driver for V4L2 | |
| config VIDEO_MX2_EMMAPRP | |
| tristate "MX2 eMMa-PrP support" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on SOC_IMX27 || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| MX2X chips have a PrP that can be used to process buffers from | |
| memory to memory. Operations include resizing and format | |
| conversion. | |
| config VIDEO_SAMSUNG_EXYNOS_GSC | |
| tristate "Samsung Exynos G-Scaler driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_EXYNOS || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler. | |
| config VIDEO_STI_BDISP | |
| tristate "STMicroelectronics BDISP 2D blitter driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_STI || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC. | |
| config VIDEO_STI_HVA | |
| tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_STI || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This V4L2 driver enables HVA (Hardware Video Accelerator) multi-format | |
| video encoder of STMicroelectronics SoC, allowing hardware encoding of | |
| raw uncompressed formats in various compressed video bitstreams format. | |
| To compile this driver as a module, choose M here: | |
| the module will be called st-hva. | |
| config VIDEO_STI_HVA_DEBUGFS | |
| bool "Export STMicroelectronics HVA internals in debugfs" | |
| depends on VIDEO_STI_HVA | |
| depends on DEBUG_FS | |
| help | |
| Select this to see information about the internal state and the last | |
| operation of STMicroelectronics HVA multi-format video encoder in | |
| debugfs. | |
| Choose N unless you know you need this. | |
| config VIDEO_STI_DELTA | |
| tristate "STMicroelectronics DELTA multi-format video decoder V4L2 driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_STI || COMPILE_TEST | |
| help | |
| This V4L2 driver enables DELTA multi-format video decoder | |
| of STMicroelectronics STiH4xx SoC series allowing hardware | |
| decoding of various compressed video bitstream format in | |
| raw uncompressed format. | |
| Use this option to see the decoders available for such | |
| hardware. | |
| Please notice that the driver will only be built if | |
| at least one of the DELTA decoder below is selected. | |
| if VIDEO_STI_DELTA | |
| config VIDEO_STI_DELTA_MJPEG | |
| bool "STMicroelectronics DELTA MJPEG support" | |
| default y | |
| help | |
| Enables DELTA MJPEG hardware support. | |
| To compile this driver as a module, choose M here: | |
| the module will be called st-delta. | |
| config VIDEO_STI_DELTA_DRIVER | |
| tristate | |
| depends on VIDEO_STI_DELTA | |
| depends on VIDEO_STI_DELTA_MJPEG | |
| default VIDEO_STI_DELTA_MJPEG | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| select RPMSG | |
| endif # VIDEO_STI_DELTA | |
| config VIDEO_RENESAS_FDP1 | |
| tristate "Renesas Fine Display Processor" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_RENESAS || COMPILE_TEST | |
| depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This is a V4L2 driver for the Renesas Fine Display Processor | |
| providing colour space conversion, and de-interlacing features. | |
| To compile this driver as a module, choose M here: the module | |
| will be called rcar_fdp1. | |
| config VIDEO_RENESAS_JPU | |
| tristate "Renesas JPEG Processing Unit" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_RENESAS || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This is a V4L2 driver for the Renesas JPEG Processing Unit. | |
| To compile this driver as a module, choose M here: the module | |
| will be called rcar_jpu. | |
| config VIDEO_RENESAS_FCP | |
| tristate "Renesas Frame Compression Processor" | |
| depends on ARCH_RENESAS || COMPILE_TEST | |
| depends on OF | |
| help | |
| This is a driver for the Renesas Frame Compression Processor (FCP). | |
| The FCP is a companion module of video processing modules in the | |
| Renesas R-Car Gen3 and RZ/G2 SoCs. It handles memory access for | |
| the codec, VSP and FDP modules. | |
| To compile this driver as a module, choose M here: the module | |
| will be called rcar-fcp. | |
| config VIDEO_RENESAS_VSP1 | |
| tristate "Renesas VSP1 Video Processing Engine" | |
| depends on VIDEO_V4L2 | |
| depends on ARCH_RENESAS || COMPILE_TEST | |
| depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP | |
| select MEDIA_CONTROLLER | |
| select VIDEO_V4L2_SUBDEV_API | |
| select VIDEOBUF2_DMA_CONTIG | |
| select VIDEOBUF2_VMALLOC | |
| help | |
| This is a V4L2 driver for the Renesas VSP1 video processing engine. | |
| To compile this driver as a module, choose M here: the module | |
| will be called vsp1. | |
| config VIDEO_ROCKCHIP_RGA | |
| tristate "Rockchip Raster 2d Graphic Acceleration Unit" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_ROCKCHIP || COMPILE_TEST | |
| select VIDEOBUF2_DMA_SG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This is a v4l2 driver for Rockchip SOC RGA 2d graphics accelerator. | |
| Rockchip RGA is a separate 2D raster graphic acceleration unit. | |
| It accelerates 2D graphics operations, such as point/line drawing, | |
| image scaling, rotation, BitBLT, alpha blending and image blur/sharpness. | |
| To compile this driver as a module choose m here. | |
| config VIDEO_TI_VPE | |
| tristate "TI VPE (Video Processing Engine) driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on SOC_DRA7XX || COMPILE_TEST | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| select VIDEO_TI_VPDMA | |
| select VIDEO_TI_SC | |
| select VIDEO_TI_CSC | |
| help | |
| Support for the TI VPE(Video Processing Engine) block | |
| found on DRA7XX SoC. | |
| config VIDEO_TI_VPE_DEBUG | |
| bool "VPE debug messages" | |
| depends on VIDEO_TI_VPE | |
| help | |
| Enable debug messages on VPE driver. | |
| config VIDEO_QCOM_VENUS | |
| tristate "Qualcomm Venus V4L2 encoder/decoder driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST | |
| depends on INTERCONNECT || !INTERCONNECT | |
| select QCOM_MDT_LOADER if ARCH_QCOM | |
| select QCOM_SCM if ARCH_QCOM | |
| select VIDEOBUF2_DMA_SG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| This is a V4L2 driver for Qualcomm Venus video accelerator | |
| hardware. It accelerates encoding and decoding operations | |
| on various Qualcomm SoCs. | |
| To compile this driver as a module choose m here. | |
| config VIDEO_SUN8I_DEINTERLACE | |
| tristate "Allwinner Deinterlace driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_SUNXI || COMPILE_TEST | |
| depends on COMMON_CLK && OF | |
| depends on PM | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| Support for the Allwinner deinterlace unit with scaling | |
| capability found on some SoCs, like H3. | |
| To compile this driver as a module choose m here. | |
| config VIDEO_SUN8I_ROTATE | |
| tristate "Allwinner DE2 rotation driver" | |
| depends on VIDEO_DEV && VIDEO_V4L2 | |
| depends on ARCH_SUNXI || COMPILE_TEST | |
| depends on COMMON_CLK && OF | |
| depends on PM | |
| select VIDEOBUF2_DMA_CONTIG | |
| select V4L2_MEM2MEM_DEV | |
| help | |
| Support for the Allwinner DE2 rotation unit. | |
| To compile this driver as a module choose m here. | |
| endif # V4L_MEM2MEM_DRIVERS | |
| # TI VIDEO PORT Helper Modules | |
| # These will be selected by VPE and VIP | |
| config VIDEO_TI_VPDMA | |
| tristate | |
| config VIDEO_TI_SC | |
| tristate | |
| config VIDEO_TI_CSC | |
| tristate | |
| menuconfig DVB_PLATFORM_DRIVERS | |
| bool "DVB platform devices" | |
| depends on MEDIA_DIGITAL_TV_SUPPORT | |
| help | |
| Say Y here to enable support for platform-specific Digital TV drivers. | |
| if DVB_PLATFORM_DRIVERS | |
| source "drivers/media/platform/sti/c8sectpfe/Kconfig" | |
| endif #DVB_PLATFORM_DRIVERS | |
| menuconfig SDR_PLATFORM_DRIVERS | |
| bool "SDR platform devices" | |
| depends on MEDIA_SDR_SUPPORT | |
| help | |
| Say Y here to enable support for platform-specific SDR Drivers. | |
| if SDR_PLATFORM_DRIVERS | |
| config VIDEO_RCAR_DRIF | |
| tristate "Renesas Digital Radio Interface (DRIF)" | |
| depends on VIDEO_V4L2 | |
| depends on ARCH_RENESAS || COMPILE_TEST | |
| select VIDEOBUF2_VMALLOC | |
| help | |
| Say Y if you want to enable R-Car Gen3 DRIF support. DRIF is Digital | |
| Radio Interface that interfaces with an RF front end chip. It is a | |
| receiver of digital data which uses DMA to transfer received data to | |
| a configured location for an application to use. | |
| To compile this driver as a module, choose M here; the module | |
| will be called rcar_drif. | |
| endif # SDR_PLATFORM_DRIVERS |