| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Generic HDLC support routines for Linux | |
| * Frame Relay support | |
| * | |
| * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> | |
| * | |
| Theory of PVC state | |
| DCE mode: | |
| (exist,new) -> 0,0 when "PVC create" or if "link unreliable" | |
| 0,x -> 1,1 if "link reliable" when sending FULL STATUS | |
| 1,1 -> 1,0 if received FULL STATUS ACK | |
| (active) -> 0 when "ifconfig PVC down" or "link unreliable" or "PVC create" | |
| -> 1 when "PVC up" and (exist,new) = 1,0 | |
| DTE mode: | |
| (exist,new,active) = FULL STATUS if "link reliable" | |
| = 0, 0, 0 if "link unreliable" | |
| No LMI: | |
| active = open and "link reliable" | |
| exist = new = not used | |
| CCITT LMI: ITU-T Q.933 Annex A | |
| ANSI LMI: ANSI T1.617 Annex D | |
| CISCO LMI: the original, aka "Gang of Four" LMI | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/hdlc.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/inetdevice.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/pkt_sched.h> | |
| #include <linux/poll.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/slab.h> | |
| #undef DEBUG_PKT | |
| #undef DEBUG_ECN | |
| #undef DEBUG_LINK | |
| #undef DEBUG_PROTO | |
| #undef DEBUG_PVC | |
| #define FR_UI 0x03 | |
| #define FR_PAD 0x00 | |
| #define NLPID_IP 0xCC | |
| #define NLPID_IPV6 0x8E | |
| #define NLPID_SNAP 0x80 | |
| #define NLPID_PAD 0x00 | |
| #define NLPID_CCITT_ANSI_LMI 0x08 | |
| #define NLPID_CISCO_LMI 0x09 | |
| #define LMI_CCITT_ANSI_DLCI 0 /* LMI DLCI */ | |
| #define LMI_CISCO_DLCI 1023 | |
| #define LMI_CALLREF 0x00 /* Call Reference */ | |
| #define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI locking shift */ | |
| #define LMI_ANSI_CISCO_REPTYPE 0x01 /* report type */ | |
| #define LMI_CCITT_REPTYPE 0x51 | |
| #define LMI_ANSI_CISCO_ALIVE 0x03 /* keep alive */ | |
| #define LMI_CCITT_ALIVE 0x53 | |
| #define LMI_ANSI_CISCO_PVCSTAT 0x07 /* PVC status */ | |
| #define LMI_CCITT_PVCSTAT 0x57 | |
| #define LMI_FULLREP 0x00 /* full report */ | |
| #define LMI_INTEGRITY 0x01 /* link integrity report */ | |
| #define LMI_SINGLE 0x02 /* single PVC report */ | |
| #define LMI_STATUS_ENQUIRY 0x75 | |
| #define LMI_STATUS 0x7D /* reply */ | |
| #define LMI_REPT_LEN 1 /* report type element length */ | |
| #define LMI_INTEG_LEN 2 /* link integrity element length */ | |
| #define LMI_CCITT_CISCO_LENGTH 13 /* LMI frame lengths */ | |
| #define LMI_ANSI_LENGTH 14 | |
| struct fr_hdr { | |
| #if defined(__LITTLE_ENDIAN_BITFIELD) | |
| unsigned ea1: 1; | |
| unsigned cr: 1; | |
| unsigned dlcih: 6; | |
| unsigned ea2: 1; | |
| unsigned de: 1; | |
| unsigned becn: 1; | |
| unsigned fecn: 1; | |
| unsigned dlcil: 4; | |
| #else | |
| unsigned dlcih: 6; | |
| unsigned cr: 1; | |
| unsigned ea1: 1; | |
| unsigned dlcil: 4; | |
| unsigned fecn: 1; | |
| unsigned becn: 1; | |
| unsigned de: 1; | |
| unsigned ea2: 1; | |
| #endif | |
| } __packed; | |
| struct pvc_device { | |
| struct net_device *frad; | |
| struct net_device *main; | |
| struct net_device *ether; /* bridged Ethernet interface */ | |
| struct pvc_device *next; /* Sorted in ascending DLCI order */ | |
| int dlci; | |
| int open_count; | |
| struct { | |
| unsigned int new: 1; | |
| unsigned int active: 1; | |
| unsigned int exist: 1; | |
| unsigned int deleted: 1; | |
| unsigned int fecn: 1; | |
| unsigned int becn: 1; | |
| unsigned int bandwidth; /* Cisco LMI reporting only */ | |
| }state; | |
| }; | |
| struct frad_state { | |
| fr_proto settings; | |
| struct pvc_device *first_pvc; | |
| int dce_pvc_count; | |
| struct timer_list timer; | |
| struct net_device *dev; | |
| unsigned long last_poll; | |
| int reliable; | |
| int dce_changed; | |
| int request; | |
| int fullrep_sent; | |
| u32 last_errors; /* last errors bit list */ | |
| u8 n391cnt; | |
| u8 txseq; /* TX sequence number */ | |
| u8 rxseq; /* RX sequence number */ | |
| }; | |
| static int fr_ioctl(struct net_device *dev, struct ifreq *ifr); | |
| static inline u16 q922_to_dlci(u8 *hdr) | |
| { | |
| return ((hdr[0] & 0xFC) << 2) | ((hdr[1] & 0xF0) >> 4); | |
| } | |
| static inline void dlci_to_q922(u8 *hdr, u16 dlci) | |
| { | |
| hdr[0] = (dlci >> 2) & 0xFC; | |
| hdr[1] = ((dlci << 4) & 0xF0) | 0x01; | |
| } | |
| static inline struct frad_state* state(hdlc_device *hdlc) | |
| { | |
| return(struct frad_state *)(hdlc->state); | |
| } | |
| static inline struct pvc_device *find_pvc(hdlc_device *hdlc, u16 dlci) | |
| { | |
| struct pvc_device *pvc = state(hdlc)->first_pvc; | |
| while (pvc) { | |
| if (pvc->dlci == dlci) | |
| return pvc; | |
| if (pvc->dlci > dlci) | |
| return NULL; /* the list is sorted */ | |
| pvc = pvc->next; | |
| } | |
| return NULL; | |
| } | |
| static struct pvc_device *add_pvc(struct net_device *dev, u16 dlci) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| struct pvc_device *pvc, **pvc_p = &state(hdlc)->first_pvc; | |
| while (*pvc_p) { | |
| if ((*pvc_p)->dlci == dlci) | |
| return *pvc_p; | |
| if ((*pvc_p)->dlci > dlci) | |
| break; /* the list is sorted */ | |
| pvc_p = &(*pvc_p)->next; | |
| } | |
| pvc = kzalloc(sizeof(*pvc), GFP_ATOMIC); | |
| #ifdef DEBUG_PVC | |
| printk(KERN_DEBUG "add_pvc: allocated pvc %p, frad %p\n", pvc, dev); | |
| #endif | |
| if (!pvc) | |
| return NULL; | |
| pvc->dlci = dlci; | |
| pvc->frad = dev; | |
| pvc->next = *pvc_p; /* Put it in the chain */ | |
| *pvc_p = pvc; | |
| return pvc; | |
| } | |
| static inline int pvc_is_used(struct pvc_device *pvc) | |
| { | |
| return pvc->main || pvc->ether; | |
| } | |
| static inline void pvc_carrier(int on, struct pvc_device *pvc) | |
| { | |
| if (on) { | |
| if (pvc->main) | |
| if (!netif_carrier_ok(pvc->main)) | |
| netif_carrier_on(pvc->main); | |
| if (pvc->ether) | |
| if (!netif_carrier_ok(pvc->ether)) | |
| netif_carrier_on(pvc->ether); | |
| } else { | |
| if (pvc->main) | |
| if (netif_carrier_ok(pvc->main)) | |
| netif_carrier_off(pvc->main); | |
| if (pvc->ether) | |
| if (netif_carrier_ok(pvc->ether)) | |
| netif_carrier_off(pvc->ether); | |
| } | |
| } | |
| static inline void delete_unused_pvcs(hdlc_device *hdlc) | |
| { | |
| struct pvc_device **pvc_p = &state(hdlc)->first_pvc; | |
| while (*pvc_p) { | |
| if (!pvc_is_used(*pvc_p)) { | |
| struct pvc_device *pvc = *pvc_p; | |
| #ifdef DEBUG_PVC | |
| printk(KERN_DEBUG "freeing unused pvc: %p\n", pvc); | |
| #endif | |
| *pvc_p = pvc->next; | |
| kfree(pvc); | |
| continue; | |
| } | |
| pvc_p = &(*pvc_p)->next; | |
| } | |
| } | |
| static inline struct net_device **get_dev_p(struct pvc_device *pvc, | |
| int type) | |
| { | |
| if (type == ARPHRD_ETHER) | |
| return &pvc->ether; | |
| else | |
| return &pvc->main; | |
| } | |
| static int fr_hard_header(struct sk_buff *skb, u16 dlci) | |
| { | |
| if (!skb->dev) { /* Control packets */ | |
| switch (dlci) { | |
| case LMI_CCITT_ANSI_DLCI: | |
| skb_push(skb, 4); | |
| skb->data[3] = NLPID_CCITT_ANSI_LMI; | |
| break; | |
| case LMI_CISCO_DLCI: | |
| skb_push(skb, 4); | |
| skb->data[3] = NLPID_CISCO_LMI; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| } else if (skb->dev->type == ARPHRD_DLCI) { | |
| switch (skb->protocol) { | |
| case htons(ETH_P_IP): | |
| skb_push(skb, 4); | |
| skb->data[3] = NLPID_IP; | |
| break; | |
| case htons(ETH_P_IPV6): | |
| skb_push(skb, 4); | |
| skb->data[3] = NLPID_IPV6; | |
| break; | |
| default: | |
| skb_push(skb, 10); | |
| skb->data[3] = FR_PAD; | |
| skb->data[4] = NLPID_SNAP; | |
| /* OUI 00-00-00 indicates an Ethertype follows */ | |
| skb->data[5] = 0x00; | |
| skb->data[6] = 0x00; | |
| skb->data[7] = 0x00; | |
| /* This should be an Ethertype: */ | |
| *(__be16 *)(skb->data + 8) = skb->protocol; | |
| } | |
| } else if (skb->dev->type == ARPHRD_ETHER) { | |
| skb_push(skb, 10); | |
| skb->data[3] = FR_PAD; | |
| skb->data[4] = NLPID_SNAP; | |
| /* OUI 00-80-C2 stands for the 802.1 organization */ | |
| skb->data[5] = 0x00; | |
| skb->data[6] = 0x80; | |
| skb->data[7] = 0xC2; | |
| /* PID 00-07 stands for Ethernet frames without FCS */ | |
| skb->data[8] = 0x00; | |
| skb->data[9] = 0x07; | |
| } else { | |
| return -EINVAL; | |
| } | |
| dlci_to_q922(skb->data, dlci); | |
| skb->data[2] = FR_UI; | |
| return 0; | |
| } | |
| static int pvc_open(struct net_device *dev) | |
| { | |
| struct pvc_device *pvc = dev->ml_priv; | |
| if ((pvc->frad->flags & IFF_UP) == 0) | |
| return -EIO; /* Frad must be UP in order to activate PVC */ | |
| if (pvc->open_count++ == 0) { | |
| hdlc_device *hdlc = dev_to_hdlc(pvc->frad); | |
| if (state(hdlc)->settings.lmi == LMI_NONE) | |
| pvc->state.active = netif_carrier_ok(pvc->frad); | |
| pvc_carrier(pvc->state.active, pvc); | |
| state(hdlc)->dce_changed = 1; | |
| } | |
| return 0; | |
| } | |
| static int pvc_close(struct net_device *dev) | |
| { | |
| struct pvc_device *pvc = dev->ml_priv; | |
| if (--pvc->open_count == 0) { | |
| hdlc_device *hdlc = dev_to_hdlc(pvc->frad); | |
| if (state(hdlc)->settings.lmi == LMI_NONE) | |
| pvc->state.active = 0; | |
| if (state(hdlc)->settings.dce) { | |
| state(hdlc)->dce_changed = 1; | |
| pvc->state.active = 0; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | |
| { | |
| struct pvc_device *pvc = dev->ml_priv; | |
| fr_proto_pvc_info info; | |
| if (ifr->ifr_settings.type == IF_GET_PROTO) { | |
| if (dev->type == ARPHRD_ETHER) | |
| ifr->ifr_settings.type = IF_PROTO_FR_ETH_PVC; | |
| else | |
| ifr->ifr_settings.type = IF_PROTO_FR_PVC; | |
| if (ifr->ifr_settings.size < sizeof(info)) { | |
| /* data size wanted */ | |
| ifr->ifr_settings.size = sizeof(info); | |
| return -ENOBUFS; | |
| } | |
| info.dlci = pvc->dlci; | |
| memcpy(info.master, pvc->frad->name, IFNAMSIZ); | |
| if (copy_to_user(ifr->ifr_settings.ifs_ifsu.fr_pvc_info, | |
| &info, sizeof(info))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev) | |
| { | |
| struct pvc_device *pvc = dev->ml_priv; | |
| if (!pvc->state.active) | |
| goto drop; | |
| if (dev->type == ARPHRD_ETHER) { | |
| int pad = ETH_ZLEN - skb->len; | |
| if (pad > 0) { /* Pad the frame with zeros */ | |
| if (__skb_pad(skb, pad, false)) | |
| goto drop; | |
| skb_put(skb, pad); | |
| } | |
| } | |
| /* We already requested the header space with dev->needed_headroom. | |
| * So this is just a protection in case the upper layer didn't take | |
| * dev->needed_headroom into consideration. | |
| */ | |
| if (skb_headroom(skb) < 10) { | |
| struct sk_buff *skb2 = skb_realloc_headroom(skb, 10); | |
| if (!skb2) | |
| goto drop; | |
| dev_kfree_skb(skb); | |
| skb = skb2; | |
| } | |
| skb->dev = dev; | |
| if (fr_hard_header(skb, pvc->dlci)) | |
| goto drop; | |
| dev->stats.tx_bytes += skb->len; | |
| dev->stats.tx_packets++; | |
| if (pvc->state.fecn) /* TX Congestion counter */ | |
| dev->stats.tx_compressed++; | |
| skb->dev = pvc->frad; | |
| skb->protocol = htons(ETH_P_HDLC); | |
| skb_reset_network_header(skb); | |
| dev_queue_xmit(skb); | |
| return NETDEV_TX_OK; | |
| drop: | |
| dev->stats.tx_dropped++; | |
| kfree_skb(skb); | |
| return NETDEV_TX_OK; | |
| } | |
| static inline void fr_log_dlci_active(struct pvc_device *pvc) | |
| { | |
| netdev_info(pvc->frad, "DLCI %d [%s%s%s]%s %s\n", | |
| pvc->dlci, | |
| pvc->main ? pvc->main->name : "", | |
| pvc->main && pvc->ether ? " " : "", | |
| pvc->ether ? pvc->ether->name : "", | |
| pvc->state.new ? " new" : "", | |
| !pvc->state.exist ? "deleted" : | |
| pvc->state.active ? "active" : "inactive"); | |
| } | |
| static inline u8 fr_lmi_nextseq(u8 x) | |
| { | |
| x++; | |
| return x ? x : 1; | |
| } | |
| static void fr_lmi_send(struct net_device *dev, int fullrep) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| struct sk_buff *skb; | |
| struct pvc_device *pvc = state(hdlc)->first_pvc; | |
| int lmi = state(hdlc)->settings.lmi; | |
| int dce = state(hdlc)->settings.dce; | |
| int len = lmi == LMI_ANSI ? LMI_ANSI_LENGTH : LMI_CCITT_CISCO_LENGTH; | |
| int stat_len = (lmi == LMI_CISCO) ? 6 : 3; | |
| u8 *data; | |
| int i = 0; | |
| if (dce && fullrep) { | |
| len += state(hdlc)->dce_pvc_count * (2 + stat_len); | |
| if (len > HDLC_MAX_MRU) { | |
| netdev_warn(dev, "Too many PVCs while sending LMI full report\n"); | |
| return; | |
| } | |
| } | |
| skb = dev_alloc_skb(len); | |
| if (!skb) { | |
| netdev_warn(dev, "Memory squeeze on fr_lmi_send()\n"); | |
| return; | |
| } | |
| memset(skb->data, 0, len); | |
| skb_reserve(skb, 4); | |
| if (lmi == LMI_CISCO) { | |
| fr_hard_header(skb, LMI_CISCO_DLCI); | |
| } else { | |
| fr_hard_header(skb, LMI_CCITT_ANSI_DLCI); | |
| } | |
| data = skb_tail_pointer(skb); | |
| data[i++] = LMI_CALLREF; | |
| data[i++] = dce ? LMI_STATUS : LMI_STATUS_ENQUIRY; | |
| if (lmi == LMI_ANSI) | |
| data[i++] = LMI_ANSI_LOCKSHIFT; | |
| data[i++] = lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : | |
| LMI_ANSI_CISCO_REPTYPE; | |
| data[i++] = LMI_REPT_LEN; | |
| data[i++] = fullrep ? LMI_FULLREP : LMI_INTEGRITY; | |
| data[i++] = lmi == LMI_CCITT ? LMI_CCITT_ALIVE : LMI_ANSI_CISCO_ALIVE; | |
| data[i++] = LMI_INTEG_LEN; | |
| data[i++] = state(hdlc)->txseq = | |
| fr_lmi_nextseq(state(hdlc)->txseq); | |
| data[i++] = state(hdlc)->rxseq; | |
| if (dce && fullrep) { | |
| while (pvc) { | |
| data[i++] = lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : | |
| LMI_ANSI_CISCO_PVCSTAT; | |
| data[i++] = stat_len; | |
| /* LMI start/restart */ | |
| if (state(hdlc)->reliable && !pvc->state.exist) { | |
| pvc->state.exist = pvc->state.new = 1; | |
| fr_log_dlci_active(pvc); | |
| } | |
| /* ifconfig PVC up */ | |
| if (pvc->open_count && !pvc->state.active && | |
| pvc->state.exist && !pvc->state.new) { | |
| pvc_carrier(1, pvc); | |
| pvc->state.active = 1; | |
| fr_log_dlci_active(pvc); | |
| } | |
| if (lmi == LMI_CISCO) { | |
| data[i] = pvc->dlci >> 8; | |
| data[i + 1] = pvc->dlci & 0xFF; | |
| } else { | |
| data[i] = (pvc->dlci >> 4) & 0x3F; | |
| data[i + 1] = ((pvc->dlci << 3) & 0x78) | 0x80; | |
| data[i + 2] = 0x80; | |
| } | |
| if (pvc->state.new) | |
| data[i + 2] |= 0x08; | |
| else if (pvc->state.active) | |
| data[i + 2] |= 0x02; | |
| i += stat_len; | |
| pvc = pvc->next; | |
| } | |
| } | |
| skb_put(skb, i); | |
| skb->priority = TC_PRIO_CONTROL; | |
| skb->dev = dev; | |
| skb->protocol = htons(ETH_P_HDLC); | |
| skb_reset_network_header(skb); | |
| dev_queue_xmit(skb); | |
| } | |
| static void fr_set_link_state(int reliable, struct net_device *dev) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| struct pvc_device *pvc = state(hdlc)->first_pvc; | |
| state(hdlc)->reliable = reliable; | |
| if (reliable) { | |
| netif_dormant_off(dev); | |
| state(hdlc)->n391cnt = 0; /* Request full status */ | |
| state(hdlc)->dce_changed = 1; | |
| if (state(hdlc)->settings.lmi == LMI_NONE) { | |
| while (pvc) { /* Activate all PVCs */ | |
| pvc_carrier(1, pvc); | |
| pvc->state.exist = pvc->state.active = 1; | |
| pvc->state.new = 0; | |
| pvc = pvc->next; | |
| } | |
| } | |
| } else { | |
| netif_dormant_on(dev); | |
| while (pvc) { /* Deactivate all PVCs */ | |
| pvc_carrier(0, pvc); | |
| pvc->state.exist = pvc->state.active = 0; | |
| pvc->state.new = 0; | |
| if (!state(hdlc)->settings.dce) | |
| pvc->state.bandwidth = 0; | |
| pvc = pvc->next; | |
| } | |
| } | |
| } | |
| static void fr_timer(struct timer_list *t) | |
| { | |
| struct frad_state *st = from_timer(st, t, timer); | |
| struct net_device *dev = st->dev; | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| int i, cnt = 0, reliable; | |
| u32 list; | |
| if (state(hdlc)->settings.dce) { | |
| reliable = state(hdlc)->request && | |
| time_before(jiffies, state(hdlc)->last_poll + | |
| state(hdlc)->settings.t392 * HZ); | |
| state(hdlc)->request = 0; | |
| } else { | |
| state(hdlc)->last_errors <<= 1; /* Shift the list */ | |
| if (state(hdlc)->request) { | |
| if (state(hdlc)->reliable) | |
| netdev_info(dev, "No LMI status reply received\n"); | |
| state(hdlc)->last_errors |= 1; | |
| } | |
| list = state(hdlc)->last_errors; | |
| for (i = 0; i < state(hdlc)->settings.n393; i++, list >>= 1) | |
| cnt += (list & 1); /* errors count */ | |
| reliable = (cnt < state(hdlc)->settings.n392); | |
| } | |
| if (state(hdlc)->reliable != reliable) { | |
| netdev_info(dev, "Link %sreliable\n", reliable ? "" : "un"); | |
| fr_set_link_state(reliable, dev); | |
| } | |
| if (state(hdlc)->settings.dce) | |
| state(hdlc)->timer.expires = jiffies + | |
| state(hdlc)->settings.t392 * HZ; | |
| else { | |
| if (state(hdlc)->n391cnt) | |
| state(hdlc)->n391cnt--; | |
| fr_lmi_send(dev, state(hdlc)->n391cnt == 0); | |
| state(hdlc)->last_poll = jiffies; | |
| state(hdlc)->request = 1; | |
| state(hdlc)->timer.expires = jiffies + | |
| state(hdlc)->settings.t391 * HZ; | |
| } | |
| add_timer(&state(hdlc)->timer); | |
| } | |
| static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| struct pvc_device *pvc; | |
| u8 rxseq, txseq; | |
| int lmi = state(hdlc)->settings.lmi; | |
| int dce = state(hdlc)->settings.dce; | |
| int stat_len = (lmi == LMI_CISCO) ? 6 : 3, reptype, error, no_ram, i; | |
| if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH : | |
| LMI_CCITT_CISCO_LENGTH)) { | |
| netdev_info(dev, "Short LMI frame\n"); | |
| return 1; | |
| } | |
| if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI : | |
| NLPID_CCITT_ANSI_LMI)) { | |
| netdev_info(dev, "Received non-LMI frame with LMI DLCI\n"); | |
| return 1; | |
| } | |
| if (skb->data[4] != LMI_CALLREF) { | |
| netdev_info(dev, "Invalid LMI Call reference (0x%02X)\n", | |
| skb->data[4]); | |
| return 1; | |
| } | |
| if (skb->data[5] != (dce ? LMI_STATUS_ENQUIRY : LMI_STATUS)) { | |
| netdev_info(dev, "Invalid LMI Message type (0x%02X)\n", | |
| skb->data[5]); | |
| return 1; | |
| } | |
| if (lmi == LMI_ANSI) { | |
| if (skb->data[6] != LMI_ANSI_LOCKSHIFT) { | |
| netdev_info(dev, "Not ANSI locking shift in LMI message (0x%02X)\n", | |
| skb->data[6]); | |
| return 1; | |
| } | |
| i = 7; | |
| } else | |
| i = 6; | |
| if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : | |
| LMI_ANSI_CISCO_REPTYPE)) { | |
| netdev_info(dev, "Not an LMI Report type IE (0x%02X)\n", | |
| skb->data[i]); | |
| return 1; | |
| } | |
| if (skb->data[++i] != LMI_REPT_LEN) { | |
| netdev_info(dev, "Invalid LMI Report type IE length (%u)\n", | |
| skb->data[i]); | |
| return 1; | |
| } | |
| reptype = skb->data[++i]; | |
| if (reptype != LMI_INTEGRITY && reptype != LMI_FULLREP) { | |
| netdev_info(dev, "Unsupported LMI Report type (0x%02X)\n", | |
| reptype); | |
| return 1; | |
| } | |
| if (skb->data[++i] != (lmi == LMI_CCITT ? LMI_CCITT_ALIVE : | |
| LMI_ANSI_CISCO_ALIVE)) { | |
| netdev_info(dev, "Not an LMI Link integrity verification IE (0x%02X)\n", | |
| skb->data[i]); | |
| return 1; | |
| } | |
| if (skb->data[++i] != LMI_INTEG_LEN) { | |
| netdev_info(dev, "Invalid LMI Link integrity verification IE length (%u)\n", | |
| skb->data[i]); | |
| return 1; | |
| } | |
| i++; | |
| state(hdlc)->rxseq = skb->data[i++]; /* TX sequence from peer */ | |
| rxseq = skb->data[i++]; /* Should confirm our sequence */ | |
| txseq = state(hdlc)->txseq; | |
| if (dce) | |
| state(hdlc)->last_poll = jiffies; | |
| error = 0; | |
| if (!state(hdlc)->reliable) | |
| error = 1; | |
| if (rxseq == 0 || rxseq != txseq) { /* Ask for full report next time */ | |
| state(hdlc)->n391cnt = 0; | |
| error = 1; | |
| } | |
| if (dce) { | |
| if (state(hdlc)->fullrep_sent && !error) { | |
| /* Stop sending full report - the last one has been confirmed by DTE */ | |
| state(hdlc)->fullrep_sent = 0; | |
| pvc = state(hdlc)->first_pvc; | |
| while (pvc) { | |
| if (pvc->state.new) { | |
| pvc->state.new = 0; | |
| /* Tell DTE that new PVC is now active */ | |
| state(hdlc)->dce_changed = 1; | |
| } | |
| pvc = pvc->next; | |
| } | |
| } | |
| if (state(hdlc)->dce_changed) { | |
| reptype = LMI_FULLREP; | |
| state(hdlc)->fullrep_sent = 1; | |
| state(hdlc)->dce_changed = 0; | |
| } | |
| state(hdlc)->request = 1; /* got request */ | |
| fr_lmi_send(dev, reptype == LMI_FULLREP ? 1 : 0); | |
| return 0; | |
| } | |
| /* DTE */ | |
| state(hdlc)->request = 0; /* got response, no request pending */ | |
| if (error) | |
| return 0; | |
| if (reptype != LMI_FULLREP) | |
| return 0; | |
| pvc = state(hdlc)->first_pvc; | |
| while (pvc) { | |
| pvc->state.deleted = 1; | |
| pvc = pvc->next; | |
| } | |
| no_ram = 0; | |
| while (skb->len >= i + 2 + stat_len) { | |
| u16 dlci; | |
| u32 bw; | |
| unsigned int active, new; | |
| if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : | |
| LMI_ANSI_CISCO_PVCSTAT)) { | |
| netdev_info(dev, "Not an LMI PVC status IE (0x%02X)\n", | |
| skb->data[i]); | |
| return 1; | |
| } | |
| if (skb->data[++i] != stat_len) { | |
| netdev_info(dev, "Invalid LMI PVC status IE length (%u)\n", | |
| skb->data[i]); | |
| return 1; | |
| } | |
| i++; | |
| new = !! (skb->data[i + 2] & 0x08); | |
| active = !! (skb->data[i + 2] & 0x02); | |
| if (lmi == LMI_CISCO) { | |
| dlci = (skb->data[i] << 8) | skb->data[i + 1]; | |
| bw = (skb->data[i + 3] << 16) | | |
| (skb->data[i + 4] << 8) | | |
| (skb->data[i + 5]); | |
| } else { | |
| dlci = ((skb->data[i] & 0x3F) << 4) | | |
| ((skb->data[i + 1] & 0x78) >> 3); | |
| bw = 0; | |
| } | |
| pvc = add_pvc(dev, dlci); | |
| if (!pvc && !no_ram) { | |
| netdev_warn(dev, "Memory squeeze on fr_lmi_recv()\n"); | |
| no_ram = 1; | |
| } | |
| if (pvc) { | |
| pvc->state.exist = 1; | |
| pvc->state.deleted = 0; | |
| if (active != pvc->state.active || | |
| new != pvc->state.new || | |
| bw != pvc->state.bandwidth || | |
| !pvc->state.exist) { | |
| pvc->state.new = new; | |
| pvc->state.active = active; | |
| pvc->state.bandwidth = bw; | |
| pvc_carrier(active, pvc); | |
| fr_log_dlci_active(pvc); | |
| } | |
| } | |
| i += stat_len; | |
| } | |
| pvc = state(hdlc)->first_pvc; | |
| while (pvc) { | |
| if (pvc->state.deleted && pvc->state.exist) { | |
| pvc_carrier(0, pvc); | |
| pvc->state.active = pvc->state.new = 0; | |
| pvc->state.exist = 0; | |
| pvc->state.bandwidth = 0; | |
| fr_log_dlci_active(pvc); | |
| } | |
| pvc = pvc->next; | |
| } | |
| /* Next full report after N391 polls */ | |
| state(hdlc)->n391cnt = state(hdlc)->settings.n391; | |
| return 0; | |
| } | |
| static int fr_rx(struct sk_buff *skb) | |
| { | |
| struct net_device *frad = skb->dev; | |
| hdlc_device *hdlc = dev_to_hdlc(frad); | |
| struct fr_hdr *fh = (struct fr_hdr *)skb->data; | |
| u8 *data = skb->data; | |
| u16 dlci; | |
| struct pvc_device *pvc; | |
| struct net_device *dev = NULL; | |
| if (skb->len <= 4 || fh->ea1 || data[2] != FR_UI) | |
| goto rx_error; | |
| dlci = q922_to_dlci(skb->data); | |
| if ((dlci == LMI_CCITT_ANSI_DLCI && | |
| (state(hdlc)->settings.lmi == LMI_ANSI || | |
| state(hdlc)->settings.lmi == LMI_CCITT)) || | |
| (dlci == LMI_CISCO_DLCI && | |
| state(hdlc)->settings.lmi == LMI_CISCO)) { | |
| if (fr_lmi_recv(frad, skb)) | |
| goto rx_error; | |
| dev_kfree_skb_any(skb); | |
| return NET_RX_SUCCESS; | |
| } | |
| pvc = find_pvc(hdlc, dlci); | |
| if (!pvc) { | |
| #ifdef DEBUG_PKT | |
| netdev_info(frad, "No PVC for received frame's DLCI %d\n", | |
| dlci); | |
| #endif | |
| dev_kfree_skb_any(skb); | |
| return NET_RX_DROP; | |
| } | |
| if (pvc->state.fecn != fh->fecn) { | |
| #ifdef DEBUG_ECN | |
| printk(KERN_DEBUG "%s: DLCI %d FECN O%s\n", frad->name, | |
| dlci, fh->fecn ? "N" : "FF"); | |
| #endif | |
| pvc->state.fecn ^= 1; | |
| } | |
| if (pvc->state.becn != fh->becn) { | |
| #ifdef DEBUG_ECN | |
| printk(KERN_DEBUG "%s: DLCI %d BECN O%s\n", frad->name, | |
| dlci, fh->becn ? "N" : "FF"); | |
| #endif | |
| pvc->state.becn ^= 1; | |
| } | |
| if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { | |
| frad->stats.rx_dropped++; | |
| return NET_RX_DROP; | |
| } | |
| if (data[3] == NLPID_IP) { | |
| skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */ | |
| dev = pvc->main; | |
| skb->protocol = htons(ETH_P_IP); | |
| } else if (data[3] == NLPID_IPV6) { | |
| skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */ | |
| dev = pvc->main; | |
| skb->protocol = htons(ETH_P_IPV6); | |
| } else if (skb->len > 10 && data[3] == FR_PAD && | |
| data[4] == NLPID_SNAP && data[5] == FR_PAD) { | |
| u16 oui = ntohs(*(__be16*)(data + 6)); | |
| u16 pid = ntohs(*(__be16*)(data + 8)); | |
| skb_pull(skb, 10); | |
| switch ((((u32)oui) << 16) | pid) { | |
| case ETH_P_ARP: /* routed frame with SNAP */ | |
| case ETH_P_IPX: | |
| case ETH_P_IP: /* a long variant */ | |
| case ETH_P_IPV6: | |
| dev = pvc->main; | |
| skb->protocol = htons(pid); | |
| break; | |
| case 0x80C20007: /* bridged Ethernet frame */ | |
| if ((dev = pvc->ether) != NULL) | |
| skb->protocol = eth_type_trans(skb, dev); | |
| break; | |
| default: | |
| netdev_info(frad, "Unsupported protocol, OUI=%x PID=%x\n", | |
| oui, pid); | |
| dev_kfree_skb_any(skb); | |
| return NET_RX_DROP; | |
| } | |
| } else { | |
| netdev_info(frad, "Unsupported protocol, NLPID=%x length=%i\n", | |
| data[3], skb->len); | |
| dev_kfree_skb_any(skb); | |
| return NET_RX_DROP; | |
| } | |
| if (dev) { | |
| dev->stats.rx_packets++; /* PVC traffic */ | |
| dev->stats.rx_bytes += skb->len; | |
| if (pvc->state.becn) | |
| dev->stats.rx_compressed++; | |
| skb->dev = dev; | |
| netif_rx(skb); | |
| return NET_RX_SUCCESS; | |
| } else { | |
| dev_kfree_skb_any(skb); | |
| return NET_RX_DROP; | |
| } | |
| rx_error: | |
| frad->stats.rx_errors++; /* Mark error */ | |
| dev_kfree_skb_any(skb); | |
| return NET_RX_DROP; | |
| } | |
| static void fr_start(struct net_device *dev) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| #ifdef DEBUG_LINK | |
| printk(KERN_DEBUG "fr_start\n"); | |
| #endif | |
| if (state(hdlc)->settings.lmi != LMI_NONE) { | |
| state(hdlc)->reliable = 0; | |
| state(hdlc)->dce_changed = 1; | |
| state(hdlc)->request = 0; | |
| state(hdlc)->fullrep_sent = 0; | |
| state(hdlc)->last_errors = 0xFFFFFFFF; | |
| state(hdlc)->n391cnt = 0; | |
| state(hdlc)->txseq = state(hdlc)->rxseq = 0; | |
| state(hdlc)->dev = dev; | |
| timer_setup(&state(hdlc)->timer, fr_timer, 0); | |
| /* First poll after 1 s */ | |
| state(hdlc)->timer.expires = jiffies + HZ; | |
| add_timer(&state(hdlc)->timer); | |
| } else | |
| fr_set_link_state(1, dev); | |
| } | |
| static void fr_stop(struct net_device *dev) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| #ifdef DEBUG_LINK | |
| printk(KERN_DEBUG "fr_stop\n"); | |
| #endif | |
| if (state(hdlc)->settings.lmi != LMI_NONE) | |
| del_timer_sync(&state(hdlc)->timer); | |
| fr_set_link_state(0, dev); | |
| } | |
| static void fr_close(struct net_device *dev) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| struct pvc_device *pvc = state(hdlc)->first_pvc; | |
| while (pvc) { /* Shutdown all PVCs for this FRAD */ | |
| if (pvc->main) | |
| dev_close(pvc->main); | |
| if (pvc->ether) | |
| dev_close(pvc->ether); | |
| pvc = pvc->next; | |
| } | |
| } | |
| static void pvc_setup(struct net_device *dev) | |
| { | |
| dev->type = ARPHRD_DLCI; | |
| dev->flags = IFF_POINTOPOINT; | |
| dev->hard_header_len = 0; | |
| dev->addr_len = 2; | |
| netif_keep_dst(dev); | |
| } | |
| static const struct net_device_ops pvc_ops = { | |
| .ndo_open = pvc_open, | |
| .ndo_stop = pvc_close, | |
| .ndo_start_xmit = pvc_xmit, | |
| .ndo_do_ioctl = pvc_ioctl, | |
| }; | |
| static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(frad); | |
| struct pvc_device *pvc; | |
| struct net_device *dev; | |
| int used; | |
| if ((pvc = add_pvc(frad, dlci)) == NULL) { | |
| netdev_warn(frad, "Memory squeeze on fr_add_pvc()\n"); | |
| return -ENOBUFS; | |
| } | |
| if (*get_dev_p(pvc, type)) | |
| return -EEXIST; | |
| used = pvc_is_used(pvc); | |
| if (type == ARPHRD_ETHER) | |
| dev = alloc_netdev(0, "pvceth%d", NET_NAME_UNKNOWN, | |
| ether_setup); | |
| else | |
| dev = alloc_netdev(0, "pvc%d", NET_NAME_UNKNOWN, pvc_setup); | |
| if (!dev) { | |
| netdev_warn(frad, "Memory squeeze on fr_pvc()\n"); | |
| delete_unused_pvcs(hdlc); | |
| return -ENOBUFS; | |
| } | |
| if (type == ARPHRD_ETHER) { | |
| dev->priv_flags &= ~IFF_TX_SKB_SHARING; | |
| eth_hw_addr_random(dev); | |
| } else { | |
| *(__be16*)dev->dev_addr = htons(dlci); | |
| dlci_to_q922(dev->broadcast, dlci); | |
| } | |
| dev->netdev_ops = &pvc_ops; | |
| dev->mtu = HDLC_MAX_MTU; | |
| dev->min_mtu = 68; | |
| dev->max_mtu = HDLC_MAX_MTU; | |
| dev->needed_headroom = 10; | |
| dev->priv_flags |= IFF_NO_QUEUE; | |
| dev->ml_priv = pvc; | |
| if (register_netdevice(dev) != 0) { | |
| free_netdev(dev); | |
| delete_unused_pvcs(hdlc); | |
| return -EIO; | |
| } | |
| dev->needs_free_netdev = true; | |
| *get_dev_p(pvc, type) = dev; | |
| if (!used) { | |
| state(hdlc)->dce_changed = 1; | |
| state(hdlc)->dce_pvc_count++; | |
| } | |
| return 0; | |
| } | |
| static int fr_del_pvc(hdlc_device *hdlc, unsigned int dlci, int type) | |
| { | |
| struct pvc_device *pvc; | |
| struct net_device *dev; | |
| if ((pvc = find_pvc(hdlc, dlci)) == NULL) | |
| return -ENOENT; | |
| if ((dev = *get_dev_p(pvc, type)) == NULL) | |
| return -ENOENT; | |
| if (dev->flags & IFF_UP) | |
| return -EBUSY; /* PVC in use */ | |
| unregister_netdevice(dev); /* the destructor will free_netdev(dev) */ | |
| *get_dev_p(pvc, type) = NULL; | |
| if (!pvc_is_used(pvc)) { | |
| state(hdlc)->dce_pvc_count--; | |
| state(hdlc)->dce_changed = 1; | |
| } | |
| delete_unused_pvcs(hdlc); | |
| return 0; | |
| } | |
| static void fr_destroy(struct net_device *frad) | |
| { | |
| hdlc_device *hdlc = dev_to_hdlc(frad); | |
| struct pvc_device *pvc = state(hdlc)->first_pvc; | |
| state(hdlc)->first_pvc = NULL; /* All PVCs destroyed */ | |
| state(hdlc)->dce_pvc_count = 0; | |
| state(hdlc)->dce_changed = 1; | |
| while (pvc) { | |
| struct pvc_device *next = pvc->next; | |
| /* destructors will free_netdev() main and ether */ | |
| if (pvc->main) | |
| unregister_netdevice(pvc->main); | |
| if (pvc->ether) | |
| unregister_netdevice(pvc->ether); | |
| kfree(pvc); | |
| pvc = next; | |
| } | |
| } | |
| static struct hdlc_proto proto = { | |
| .close = fr_close, | |
| .start = fr_start, | |
| .stop = fr_stop, | |
| .detach = fr_destroy, | |
| .ioctl = fr_ioctl, | |
| .netif_rx = fr_rx, | |
| .module = THIS_MODULE, | |
| }; | |
| static int fr_ioctl(struct net_device *dev, struct ifreq *ifr) | |
| { | |
| fr_proto __user *fr_s = ifr->ifr_settings.ifs_ifsu.fr; | |
| const size_t size = sizeof(fr_proto); | |
| fr_proto new_settings; | |
| hdlc_device *hdlc = dev_to_hdlc(dev); | |
| fr_proto_pvc pvc; | |
| int result; | |
| switch (ifr->ifr_settings.type) { | |
| case IF_GET_PROTO: | |
| if (dev_to_hdlc(dev)->proto != &proto) /* Different proto */ | |
| return -EINVAL; | |
| ifr->ifr_settings.type = IF_PROTO_FR; | |
| if (ifr->ifr_settings.size < size) { | |
| ifr->ifr_settings.size = size; /* data size wanted */ | |
| return -ENOBUFS; | |
| } | |
| if (copy_to_user(fr_s, &state(hdlc)->settings, size)) | |
| return -EFAULT; | |
| return 0; | |
| case IF_PROTO_FR: | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| if (dev->flags & IFF_UP) | |
| return -EBUSY; | |
| if (copy_from_user(&new_settings, fr_s, size)) | |
| return -EFAULT; | |
| if (new_settings.lmi == LMI_DEFAULT) | |
| new_settings.lmi = LMI_ANSI; | |
| if ((new_settings.lmi != LMI_NONE && | |
| new_settings.lmi != LMI_ANSI && | |
| new_settings.lmi != LMI_CCITT && | |
| new_settings.lmi != LMI_CISCO) || | |
| new_settings.t391 < 1 || | |
| new_settings.t392 < 2 || | |
| new_settings.n391 < 1 || | |
| new_settings.n392 < 1 || | |
| new_settings.n393 < new_settings.n392 || | |
| new_settings.n393 > 32 || | |
| (new_settings.dce != 0 && | |
| new_settings.dce != 1)) | |
| return -EINVAL; | |
| result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); | |
| if (result) | |
| return result; | |
| if (dev_to_hdlc(dev)->proto != &proto) { /* Different proto */ | |
| result = attach_hdlc_protocol(dev, &proto, | |
| sizeof(struct frad_state)); | |
| if (result) | |
| return result; | |
| state(hdlc)->first_pvc = NULL; | |
| state(hdlc)->dce_pvc_count = 0; | |
| } | |
| memcpy(&state(hdlc)->settings, &new_settings, size); | |
| dev->type = ARPHRD_FRAD; | |
| call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev); | |
| return 0; | |
| case IF_PROTO_FR_ADD_PVC: | |
| case IF_PROTO_FR_DEL_PVC: | |
| case IF_PROTO_FR_ADD_ETH_PVC: | |
| case IF_PROTO_FR_DEL_ETH_PVC: | |
| if (dev_to_hdlc(dev)->proto != &proto) /* Different proto */ | |
| return -EINVAL; | |
| if (!capable(CAP_NET_ADMIN)) | |
| return -EPERM; | |
| if (copy_from_user(&pvc, ifr->ifr_settings.ifs_ifsu.fr_pvc, | |
| sizeof(fr_proto_pvc))) | |
| return -EFAULT; | |
| if (pvc.dlci <= 0 || pvc.dlci >= 1024) | |
| return -EINVAL; /* Only 10 bits, DLCI 0 reserved */ | |
| if (ifr->ifr_settings.type == IF_PROTO_FR_ADD_ETH_PVC || | |
| ifr->ifr_settings.type == IF_PROTO_FR_DEL_ETH_PVC) | |
| result = ARPHRD_ETHER; /* bridged Ethernet device */ | |
| else | |
| result = ARPHRD_DLCI; | |
| if (ifr->ifr_settings.type == IF_PROTO_FR_ADD_PVC || | |
| ifr->ifr_settings.type == IF_PROTO_FR_ADD_ETH_PVC) | |
| return fr_add_pvc(dev, pvc.dlci, result); | |
| else | |
| return fr_del_pvc(hdlc, pvc.dlci, result); | |
| } | |
| return -EINVAL; | |
| } | |
| static int __init mod_init(void) | |
| { | |
| register_hdlc_protocol(&proto); | |
| return 0; | |
| } | |
| static void __exit mod_exit(void) | |
| { | |
| unregister_hdlc_protocol(&proto); | |
| } | |
| module_init(mod_init); | |
| module_exit(mod_exit); | |
| MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); | |
| MODULE_DESCRIPTION("Frame-Relay protocol support for generic HDLC"); | |
| MODULE_LICENSE("GPL v2"); |