| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * System Control and Power Interface (SCPI) Protocol based clock driver |
| * |
| * Copyright (C) 2015 ARM Ltd. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/scpi_protocol.h> |
| |
| struct scpi_clk { |
| u32 id; |
| struct clk_hw hw; |
| struct scpi_dvfs_info *info; |
| struct scpi_ops *scpi_ops; |
| }; |
| |
| #define to_scpi_clk(clk) container_of(clk, struct scpi_clk, hw) |
| |
| static struct platform_device *cpufreq_dev; |
| |
| static unsigned long scpi_clk_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct scpi_clk *clk = to_scpi_clk(hw); |
| |
| return clk->scpi_ops->clk_get_val(clk->id); |
| } |
| |
| static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| /* |
| * We can't figure out what rate it will be, so just return the |
| * rate back to the caller. scpi_clk_recalc_rate() will be called |
| * after the rate is set and we'll know what rate the clock is |
| * running at then. |
| */ |
| return rate; |
| } |
| |
| static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct scpi_clk *clk = to_scpi_clk(hw); |
| |
| return clk->scpi_ops->clk_set_val(clk->id, rate); |
| } |
| |
| static const struct clk_ops scpi_clk_ops = { |
| .recalc_rate = scpi_clk_recalc_rate, |
| .round_rate = scpi_clk_round_rate, |
| .set_rate = scpi_clk_set_rate, |
| }; |
| |
| /* find closest match to given frequency in OPP table */ |
| static long __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate) |
| { |
| int idx; |
| unsigned long fmin = 0, fmax = ~0, ftmp; |
| const struct scpi_opp *opp = clk->info->opps; |
| |
| for (idx = 0; idx < clk->info->count; idx++, opp++) { |
| ftmp = opp->freq; |
| if (ftmp >= rate) { |
| if (ftmp <= fmax) |
| fmax = ftmp; |
| break; |
| } else if (ftmp >= fmin) { |
| fmin = ftmp; |
| } |
| } |
| return fmax != ~0 ? fmax : fmin; |
| } |
| |
| static unsigned long scpi_dvfs_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct scpi_clk *clk = to_scpi_clk(hw); |
| int idx = clk->scpi_ops->dvfs_get_idx(clk->id); |
| const struct scpi_opp *opp; |
| |
| if (idx < 0) |
| return 0; |
| |
| opp = clk->info->opps + idx; |
| return opp->freq; |
| } |
| |
| static long scpi_dvfs_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct scpi_clk *clk = to_scpi_clk(hw); |
| |
| return __scpi_dvfs_round_rate(clk, rate); |
| } |
| |
| static int __scpi_find_dvfs_index(struct scpi_clk *clk, unsigned long rate) |
| { |
| int idx, max_opp = clk->info->count; |
| const struct scpi_opp *opp = clk->info->opps; |
| |
| for (idx = 0; idx < max_opp; idx++, opp++) |
| if (opp->freq == rate) |
| return idx; |
| return -EINVAL; |
| } |
| |
| static int scpi_dvfs_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct scpi_clk *clk = to_scpi_clk(hw); |
| int ret = __scpi_find_dvfs_index(clk, rate); |
| |
| if (ret < 0) |
| return ret; |
| return clk->scpi_ops->dvfs_set_idx(clk->id, (u8)ret); |
| } |
| |
| static const struct clk_ops scpi_dvfs_ops = { |
| .recalc_rate = scpi_dvfs_recalc_rate, |
| .round_rate = scpi_dvfs_round_rate, |
| .set_rate = scpi_dvfs_set_rate, |
| }; |
| |
| static const struct of_device_id scpi_clk_match[] __maybe_unused = { |
| { .compatible = "arm,scpi-dvfs-clocks", .data = &scpi_dvfs_ops, }, |
| { .compatible = "arm,scpi-variable-clocks", .data = &scpi_clk_ops, }, |
| {} |
| }; |
| |
| static int |
| scpi_clk_ops_init(struct device *dev, const struct of_device_id *match, |
| struct scpi_clk *sclk, const char *name) |
| { |
| struct clk_init_data init; |
| unsigned long min = 0, max = 0; |
| int ret; |
| |
| init.name = name; |
| init.flags = 0; |
| init.num_parents = 0; |
| init.ops = match->data; |
| sclk->hw.init = &init; |
| sclk->scpi_ops = get_scpi_ops(); |
| |
| if (init.ops == &scpi_dvfs_ops) { |
| sclk->info = sclk->scpi_ops->dvfs_get_info(sclk->id); |
| if (IS_ERR(sclk->info)) |
| return PTR_ERR(sclk->info); |
| } else if (init.ops == &scpi_clk_ops) { |
| if (sclk->scpi_ops->clk_get_range(sclk->id, &min, &max) || !max) |
| return -EINVAL; |
| } else { |
| return -EINVAL; |
| } |
| |
| ret = devm_clk_hw_register(dev, &sclk->hw); |
| if (!ret && max) |
| clk_hw_set_rate_range(&sclk->hw, min, max); |
| return ret; |
| } |
| |
| struct scpi_clk_data { |
| struct scpi_clk **clk; |
| unsigned int clk_num; |
| }; |
| |
| static struct clk_hw * |
| scpi_of_clk_src_get(struct of_phandle_args *clkspec, void *data) |
| { |
| struct scpi_clk *sclk; |
| struct scpi_clk_data *clk_data = data; |
| unsigned int idx = clkspec->args[0], count; |
| |
| for (count = 0; count < clk_data->clk_num; count++) { |
| sclk = clk_data->clk[count]; |
| if (idx == sclk->id) |
| return &sclk->hw; |
| } |
| |
| return ERR_PTR(-EINVAL); |
| } |
| |
| static int scpi_clk_add(struct device *dev, struct device_node *np, |
| const struct of_device_id *match) |
| { |
| int idx, count, err; |
| struct scpi_clk_data *clk_data; |
| |
| count = of_property_count_strings(np, "clock-output-names"); |
| if (count < 0) { |
| dev_err(dev, "%pOFn: invalid clock output count\n", np); |
| return -EINVAL; |
| } |
| |
| clk_data = devm_kmalloc(dev, sizeof(*clk_data), GFP_KERNEL); |
| if (!clk_data) |
| return -ENOMEM; |
| |
| clk_data->clk_num = count; |
| clk_data->clk = devm_kcalloc(dev, count, sizeof(*clk_data->clk), |
| GFP_KERNEL); |
| if (!clk_data->clk) |
| return -ENOMEM; |
| |
| for (idx = 0; idx < count; idx++) { |
| struct scpi_clk *sclk; |
| const char *name; |
| u32 val; |
| |
| sclk = devm_kzalloc(dev, sizeof(*sclk), GFP_KERNEL); |
| if (!sclk) |
| return -ENOMEM; |
| |
| if (of_property_read_string_index(np, "clock-output-names", |
| idx, &name)) { |
| dev_err(dev, "invalid clock name @ %pOFn\n", np); |
| return -EINVAL; |
| } |
| |
| if (of_property_read_u32_index(np, "clock-indices", |
| idx, &val)) { |
| dev_err(dev, "invalid clock index @ %pOFn\n", np); |
| return -EINVAL; |
| } |
| |
| sclk->id = val; |
| |
| err = scpi_clk_ops_init(dev, match, sclk, name); |
| if (err) { |
| dev_err(dev, "failed to register clock '%s'\n", name); |
| return err; |
| } |
| |
| dev_dbg(dev, "Registered clock '%s'\n", name); |
| clk_data->clk[idx] = sclk; |
| } |
| |
| return of_clk_add_hw_provider(np, scpi_of_clk_src_get, clk_data); |
| } |
| |
| static void scpi_clocks_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *child, *np = dev->of_node; |
| |
| if (cpufreq_dev) { |
| platform_device_unregister(cpufreq_dev); |
| cpufreq_dev = NULL; |
| } |
| |
| for_each_available_child_of_node(np, child) |
| of_clk_del_provider(np); |
| } |
| |
| static int scpi_clocks_probe(struct platform_device *pdev) |
| { |
| int ret; |
| struct device *dev = &pdev->dev; |
| struct device_node *child, *np = dev->of_node; |
| const struct of_device_id *match; |
| |
| if (!get_scpi_ops()) |
| return -ENXIO; |
| |
| for_each_available_child_of_node(np, child) { |
| match = of_match_node(scpi_clk_match, child); |
| if (!match) |
| continue; |
| ret = scpi_clk_add(dev, child, match); |
| if (ret) { |
| scpi_clocks_remove(pdev); |
| of_node_put(child); |
| return ret; |
| } |
| |
| if (match->data != &scpi_dvfs_ops) |
| continue; |
| /* Add the virtual cpufreq device if it's DVFS clock provider */ |
| cpufreq_dev = platform_device_register_simple("scpi-cpufreq", |
| -1, NULL, 0); |
| if (IS_ERR(cpufreq_dev)) |
| pr_warn("unable to register cpufreq device"); |
| } |
| return 0; |
| } |
| |
| static const struct of_device_id scpi_clocks_ids[] = { |
| { .compatible = "arm,scpi-clocks", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, scpi_clocks_ids); |
| |
| static struct platform_driver scpi_clocks_driver = { |
| .driver = { |
| .name = "scpi_clocks", |
| .of_match_table = scpi_clocks_ids, |
| }, |
| .probe = scpi_clocks_probe, |
| .remove_new = scpi_clocks_remove, |
| }; |
| module_platform_driver(scpi_clocks_driver); |
| |
| MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); |
| MODULE_DESCRIPTION("ARM SCPI clock driver"); |
| MODULE_LICENSE("GPL v2"); |