| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2021 NXP |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/clk-provider.h> |
| #include <linux/err.h> |
| #include <linux/export.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/slab.h> |
| #include <asm/div64.h> |
| |
| #include "clk.h" |
| |
| #define PLL_CTRL 0x0 |
| #define HW_CTRL_SEL BIT(16) |
| #define CLKMUX_BYPASS BIT(2) |
| #define CLKMUX_EN BIT(1) |
| #define POWERUP_MASK BIT(0) |
| |
| #define PLL_ANA_PRG 0x10 |
| #define PLL_SPREAD_SPECTRUM 0x30 |
| |
| #define PLL_NUMERATOR 0x40 |
| #define PLL_MFN_MASK GENMASK(31, 2) |
| |
| #define PLL_DENOMINATOR 0x50 |
| #define PLL_MFD_MASK GENMASK(29, 0) |
| |
| #define PLL_DIV 0x60 |
| #define PLL_MFI_MASK GENMASK(24, 16) |
| #define PLL_RDIV_MASK GENMASK(15, 13) |
| #define PLL_ODIV_MASK GENMASK(7, 0) |
| |
| #define PLL_DFS_CTRL(x) (0x70 + (x) * 0x10) |
| |
| #define PLL_STATUS 0xF0 |
| #define LOCK_STATUS BIT(0) |
| |
| #define DFS_STATUS 0xF4 |
| |
| #define LOCK_TIMEOUT_US 200 |
| |
| #define PLL_FRACN_GP(_rate, _mfi, _mfn, _mfd, _rdiv, _odiv) \ |
| { \ |
| .rate = (_rate), \ |
| .mfi = (_mfi), \ |
| .mfn = (_mfn), \ |
| .mfd = (_mfd), \ |
| .rdiv = (_rdiv), \ |
| .odiv = (_odiv), \ |
| } |
| |
| #define PLL_FRACN_GP_INTEGER(_rate, _mfi, _rdiv, _odiv) \ |
| { \ |
| .rate = (_rate), \ |
| .mfi = (_mfi), \ |
| .mfn = 0, \ |
| .mfd = 0, \ |
| .rdiv = (_rdiv), \ |
| .odiv = (_odiv), \ |
| } |
| |
| struct clk_fracn_gppll { |
| struct clk_hw hw; |
| void __iomem *base; |
| const struct imx_fracn_gppll_rate_table *rate_table; |
| int rate_count; |
| u32 flags; |
| }; |
| |
| /* |
| * Fvco = (Fref / rdiv) * (MFI + MFN / MFD) |
| * Fout = Fvco / odiv |
| * The (Fref / rdiv) should be in range 20MHz to 40MHz |
| * The Fvco should be in range 2.5Ghz to 5Ghz |
| */ |
| static const struct imx_fracn_gppll_rate_table fracn_tbl[] = { |
| PLL_FRACN_GP(650000000U, 162, 50, 100, 0, 6), |
| PLL_FRACN_GP(594000000U, 198, 0, 1, 0, 8), |
| PLL_FRACN_GP(560000000U, 140, 0, 1, 0, 6), |
| PLL_FRACN_GP(498000000U, 166, 0, 1, 0, 8), |
| PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6), |
| PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9), |
| PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12), |
| PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10), |
| PLL_FRACN_GP(300000000U, 150, 0, 1, 0, 12) |
| }; |
| |
| struct imx_fracn_gppll_clk imx_fracn_gppll = { |
| .rate_table = fracn_tbl, |
| .rate_count = ARRAY_SIZE(fracn_tbl), |
| }; |
| EXPORT_SYMBOL_GPL(imx_fracn_gppll); |
| |
| /* |
| * Fvco = (Fref / rdiv) * MFI |
| * Fout = Fvco / odiv |
| * The (Fref / rdiv) should be in range 20MHz to 40MHz |
| * The Fvco should be in range 2.5Ghz to 5Ghz |
| */ |
| static const struct imx_fracn_gppll_rate_table int_tbl[] = { |
| PLL_FRACN_GP_INTEGER(1700000000U, 141, 1, 2), |
| PLL_FRACN_GP_INTEGER(1400000000U, 175, 1, 3), |
| PLL_FRACN_GP_INTEGER(900000000U, 150, 1, 4), |
| }; |
| |
| struct imx_fracn_gppll_clk imx_fracn_gppll_integer = { |
| .rate_table = int_tbl, |
| .rate_count = ARRAY_SIZE(int_tbl), |
| }; |
| EXPORT_SYMBOL_GPL(imx_fracn_gppll_integer); |
| |
| static inline struct clk_fracn_gppll *to_clk_fracn_gppll(struct clk_hw *hw) |
| { |
| return container_of(hw, struct clk_fracn_gppll, hw); |
| } |
| |
| static const struct imx_fracn_gppll_rate_table * |
| imx_get_pll_settings(struct clk_fracn_gppll *pll, unsigned long rate) |
| { |
| const struct imx_fracn_gppll_rate_table *rate_table = pll->rate_table; |
| int i; |
| |
| for (i = 0; i < pll->rate_count; i++) |
| if (rate == rate_table[i].rate) |
| return &rate_table[i]; |
| |
| return NULL; |
| } |
| |
| static long clk_fracn_gppll_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| struct clk_fracn_gppll *pll = to_clk_fracn_gppll(hw); |
| const struct imx_fracn_gppll_rate_table *rate_table = pll->rate_table; |
| int i; |
| |
| /* Assuming rate_table is in descending order */ |
| for (i = 0; i < pll->rate_count; i++) |
| if (rate >= rate_table[i].rate) |
| return rate_table[i].rate; |
| |
| /* return minimum supported value */ |
| return rate_table[pll->rate_count - 1].rate; |
| } |
| |
| static unsigned long clk_fracn_gppll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) |
| { |
| struct clk_fracn_gppll *pll = to_clk_fracn_gppll(hw); |
| const struct imx_fracn_gppll_rate_table *rate_table = pll->rate_table; |
| u32 pll_numerator, pll_denominator, pll_div; |
| u32 mfi, mfn, mfd, rdiv, odiv; |
| u64 fvco = parent_rate; |
| long rate = 0; |
| int i; |
| |
| pll_numerator = readl_relaxed(pll->base + PLL_NUMERATOR); |
| mfn = FIELD_GET(PLL_MFN_MASK, pll_numerator); |
| |
| pll_denominator = readl_relaxed(pll->base + PLL_DENOMINATOR); |
| mfd = FIELD_GET(PLL_MFD_MASK, pll_denominator); |
| |
| pll_div = readl_relaxed(pll->base + PLL_DIV); |
| mfi = FIELD_GET(PLL_MFI_MASK, pll_div); |
| |
| rdiv = FIELD_GET(PLL_RDIV_MASK, pll_div); |
| odiv = FIELD_GET(PLL_ODIV_MASK, pll_div); |
| |
| /* |
| * Sometimes, the recalculated rate has deviation due to |
| * the frac part. So find the accurate pll rate from the table |
| * first, if no match rate in the table, use the rate calculated |
| * from the equation below. |
| */ |
| for (i = 0; i < pll->rate_count; i++) { |
| if (rate_table[i].mfn == mfn && rate_table[i].mfi == mfi && |
| rate_table[i].mfd == mfd && rate_table[i].rdiv == rdiv && |
| rate_table[i].odiv == odiv) |
| rate = rate_table[i].rate; |
| } |
| |
| if (rate) |
| return (unsigned long)rate; |
| |
| if (!rdiv) |
| rdiv = rdiv + 1; |
| |
| switch (odiv) { |
| case 0: |
| odiv = 2; |
| break; |
| case 1: |
| odiv = 3; |
| break; |
| default: |
| break; |
| } |
| |
| if (pll->flags & CLK_FRACN_GPPLL_INTEGER) { |
| /* Fvco = (Fref / rdiv) * MFI */ |
| fvco = fvco * mfi; |
| do_div(fvco, rdiv * odiv); |
| } else { |
| /* Fvco = (Fref / rdiv) * (MFI + MFN / MFD) */ |
| fvco = fvco * mfi * mfd + fvco * mfn; |
| do_div(fvco, mfd * rdiv * odiv); |
| } |
| |
| return (unsigned long)fvco; |
| } |
| |
| static int clk_fracn_gppll_wait_lock(struct clk_fracn_gppll *pll) |
| { |
| u32 val; |
| |
| return readl_poll_timeout(pll->base + PLL_STATUS, val, |
| val & LOCK_STATUS, 0, LOCK_TIMEOUT_US); |
| } |
| |
| static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct clk_fracn_gppll *pll = to_clk_fracn_gppll(hw); |
| const struct imx_fracn_gppll_rate_table *rate; |
| u32 tmp, pll_div, ana_mfn; |
| int ret; |
| |
| rate = imx_get_pll_settings(pll, drate); |
| |
| /* Hardware control select disable. PLL is control by register */ |
| tmp = readl_relaxed(pll->base + PLL_CTRL); |
| tmp &= ~HW_CTRL_SEL; |
| writel_relaxed(tmp, pll->base + PLL_CTRL); |
| |
| /* Disable output */ |
| tmp = readl_relaxed(pll->base + PLL_CTRL); |
| tmp &= ~CLKMUX_EN; |
| writel_relaxed(tmp, pll->base + PLL_CTRL); |
| |
| /* Power Down */ |
| tmp &= ~POWERUP_MASK; |
| writel_relaxed(tmp, pll->base + PLL_CTRL); |
| |
| /* Disable BYPASS */ |
| tmp &= ~CLKMUX_BYPASS; |
| writel_relaxed(tmp, pll->base + PLL_CTRL); |
| |
| pll_div = FIELD_PREP(PLL_RDIV_MASK, rate->rdiv) | rate->odiv | |
| FIELD_PREP(PLL_MFI_MASK, rate->mfi); |
| writel_relaxed(pll_div, pll->base + PLL_DIV); |
| if (pll->flags & CLK_FRACN_GPPLL_FRACN) { |
| writel_relaxed(rate->mfd, pll->base + PLL_DENOMINATOR); |
| writel_relaxed(FIELD_PREP(PLL_MFN_MASK, rate->mfn), pll->base + PLL_NUMERATOR); |
| } |
| |
| /* Wait for 5us according to fracn mode pll doc */ |
| udelay(5); |
| |
| /* Enable Powerup */ |
| tmp |= POWERUP_MASK; |
| writel_relaxed(tmp, pll->base + PLL_CTRL); |
| |
| /* Wait Lock */ |
| ret = clk_fracn_gppll_wait_lock(pll); |
| if (ret) |
| return ret; |
| |
| /* Enable output */ |
| tmp |= CLKMUX_EN; |
| writel_relaxed(tmp, pll->base + PLL_CTRL); |
| |
| ana_mfn = readl_relaxed(pll->base + PLL_STATUS); |
| ana_mfn = FIELD_GET(PLL_MFN_MASK, ana_mfn); |
| |
| WARN(ana_mfn != rate->mfn, "ana_mfn != rate->mfn\n"); |
| |
| return 0; |
| } |
| |
| static int clk_fracn_gppll_prepare(struct clk_hw *hw) |
| { |
| struct clk_fracn_gppll *pll = to_clk_fracn_gppll(hw); |
| u32 val; |
| int ret; |
| |
| val = readl_relaxed(pll->base + PLL_CTRL); |
| if (val & POWERUP_MASK) |
| return 0; |
| |
| val |= CLKMUX_BYPASS; |
| writel_relaxed(val, pll->base + PLL_CTRL); |
| |
| val |= POWERUP_MASK; |
| writel_relaxed(val, pll->base + PLL_CTRL); |
| |
| val |= CLKMUX_EN; |
| writel_relaxed(val, pll->base + PLL_CTRL); |
| |
| ret = clk_fracn_gppll_wait_lock(pll); |
| if (ret) |
| return ret; |
| |
| val &= ~CLKMUX_BYPASS; |
| writel_relaxed(val, pll->base + PLL_CTRL); |
| |
| return 0; |
| } |
| |
| static int clk_fracn_gppll_is_prepared(struct clk_hw *hw) |
| { |
| struct clk_fracn_gppll *pll = to_clk_fracn_gppll(hw); |
| u32 val; |
| |
| val = readl_relaxed(pll->base + PLL_CTRL); |
| |
| return (val & POWERUP_MASK) ? 1 : 0; |
| } |
| |
| static void clk_fracn_gppll_unprepare(struct clk_hw *hw) |
| { |
| struct clk_fracn_gppll *pll = to_clk_fracn_gppll(hw); |
| u32 val; |
| |
| val = readl_relaxed(pll->base + PLL_CTRL); |
| val &= ~POWERUP_MASK; |
| writel_relaxed(val, pll->base + PLL_CTRL); |
| } |
| |
| static const struct clk_ops clk_fracn_gppll_ops = { |
| .prepare = clk_fracn_gppll_prepare, |
| .unprepare = clk_fracn_gppll_unprepare, |
| .is_prepared = clk_fracn_gppll_is_prepared, |
| .recalc_rate = clk_fracn_gppll_recalc_rate, |
| .round_rate = clk_fracn_gppll_round_rate, |
| .set_rate = clk_fracn_gppll_set_rate, |
| }; |
| |
| static struct clk_hw *_imx_clk_fracn_gppll(const char *name, const char *parent_name, |
| void __iomem *base, |
| const struct imx_fracn_gppll_clk *pll_clk, |
| u32 pll_flags) |
| { |
| struct clk_fracn_gppll *pll; |
| struct clk_hw *hw; |
| struct clk_init_data init; |
| int ret; |
| |
| pll = kzalloc(sizeof(*pll), GFP_KERNEL); |
| if (!pll) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = name; |
| init.flags = pll_clk->flags; |
| init.parent_names = &parent_name; |
| init.num_parents = 1; |
| init.ops = &clk_fracn_gppll_ops; |
| |
| pll->base = base; |
| pll->hw.init = &init; |
| pll->rate_table = pll_clk->rate_table; |
| pll->rate_count = pll_clk->rate_count; |
| pll->flags = pll_flags; |
| |
| hw = &pll->hw; |
| |
| ret = clk_hw_register(NULL, hw); |
| if (ret) { |
| pr_err("%s: failed to register pll %s %d\n", __func__, name, ret); |
| kfree(pll); |
| return ERR_PTR(ret); |
| } |
| |
| return hw; |
| } |
| |
| struct clk_hw *imx_clk_fracn_gppll(const char *name, const char *parent_name, void __iomem *base, |
| const struct imx_fracn_gppll_clk *pll_clk) |
| { |
| return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_FRACN); |
| } |
| EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll); |
| |
| struct clk_hw *imx_clk_fracn_gppll_integer(const char *name, const char *parent_name, |
| void __iomem *base, |
| const struct imx_fracn_gppll_clk *pll_clk) |
| { |
| return _imx_clk_fracn_gppll(name, parent_name, base, pll_clk, CLK_FRACN_GPPLL_INTEGER); |
| } |
| EXPORT_SYMBOL_GPL(imx_clk_fracn_gppll_integer); |