| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/list.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/timer.h> |
| #include <linux/device.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| #include <linux/kthread.h> |
| #include <linux/freezer.h> |
| #include <linux/hwmon.h> |
| #include <linux/of.h> |
| |
| #include <linux/atomic.h> |
| |
| #include "w1_internal.h" |
| #include "w1_netlink.h" |
| |
| #define W1_FAMILY_DEFAULT 0 |
| #define W1_FAMILY_DS28E04 0x1C /* for crc quirk */ |
| |
| |
| static int w1_timeout = 10; |
| module_param_named(timeout, w1_timeout, int, 0); |
| MODULE_PARM_DESC(timeout, "time in seconds between automatic slave searches"); |
| |
| static int w1_timeout_us = 0; |
| module_param_named(timeout_us, w1_timeout_us, int, 0); |
| MODULE_PARM_DESC(timeout_us, |
| "time in microseconds between automatic slave searches"); |
| |
| /* A search stops when w1_max_slave_count devices have been found in that |
| * search. The next search will start over and detect the same set of devices |
| * on a static 1-wire bus. Memory is not allocated based on this number, just |
| * on the number of devices known to the kernel. Having a high number does not |
| * consume additional resources. As a special case, if there is only one |
| * device on the network and w1_max_slave_count is set to 1, the device id can |
| * be read directly skipping the normal slower search process. |
| */ |
| int w1_max_slave_count = 64; |
| module_param_named(max_slave_count, w1_max_slave_count, int, 0); |
| MODULE_PARM_DESC(max_slave_count, |
| "maximum number of slaves detected in a search"); |
| |
| int w1_max_slave_ttl = 10; |
| module_param_named(slave_ttl, w1_max_slave_ttl, int, 0); |
| MODULE_PARM_DESC(slave_ttl, |
| "Number of searches not seeing a slave before it will be removed"); |
| |
| DEFINE_MUTEX(w1_mlock); |
| LIST_HEAD(w1_masters); |
| |
| static int w1_master_match(struct device *dev, struct device_driver *drv) |
| { |
| return 1; |
| } |
| |
| static int w1_master_probe(struct device *dev) |
| { |
| return -ENODEV; |
| } |
| |
| static void w1_master_release(struct device *dev) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| |
| dev_dbg(dev, "%s: Releasing %s.\n", __func__, md->name); |
| memset(md, 0, sizeof(struct w1_master) + sizeof(struct w1_bus_master)); |
| kfree(md); |
| } |
| |
| static void w1_slave_release(struct device *dev) |
| { |
| struct w1_slave *sl = dev_to_w1_slave(dev); |
| |
| dev_dbg(dev, "%s: Releasing %s [%p]\n", __func__, sl->name, sl); |
| |
| w1_family_put(sl->family); |
| sl->master->slave_count--; |
| } |
| |
| static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct w1_slave *sl = dev_to_w1_slave(dev); |
| |
| return sprintf(buf, "%s\n", sl->name); |
| } |
| static DEVICE_ATTR_RO(name); |
| |
| static ssize_t id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct w1_slave *sl = dev_to_w1_slave(dev); |
| ssize_t count = sizeof(sl->reg_num); |
| |
| memcpy(buf, (u8 *)&sl->reg_num, count); |
| return count; |
| } |
| static DEVICE_ATTR_RO(id); |
| |
| static struct attribute *w1_slave_attrs[] = { |
| &dev_attr_name.attr, |
| &dev_attr_id.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(w1_slave); |
| |
| /* Default family */ |
| |
| static ssize_t rw_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, char *buf, loff_t off, |
| size_t count) |
| { |
| struct w1_slave *sl = kobj_to_w1_slave(kobj); |
| |
| mutex_lock(&sl->master->mutex); |
| if (w1_reset_select_slave(sl)) { |
| count = 0; |
| goto out_up; |
| } |
| |
| w1_write_block(sl->master, buf, count); |
| |
| out_up: |
| mutex_unlock(&sl->master->mutex); |
| return count; |
| } |
| |
| static ssize_t rw_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, char *buf, loff_t off, |
| size_t count) |
| { |
| struct w1_slave *sl = kobj_to_w1_slave(kobj); |
| |
| mutex_lock(&sl->master->mutex); |
| w1_read_block(sl->master, buf, count); |
| mutex_unlock(&sl->master->mutex); |
| return count; |
| } |
| |
| static BIN_ATTR_RW(rw, PAGE_SIZE); |
| |
| static struct bin_attribute *w1_slave_bin_attrs[] = { |
| &bin_attr_rw, |
| NULL, |
| }; |
| |
| static const struct attribute_group w1_slave_default_group = { |
| .bin_attrs = w1_slave_bin_attrs, |
| }; |
| |
| static const struct attribute_group *w1_slave_default_groups[] = { |
| &w1_slave_default_group, |
| NULL, |
| }; |
| |
| static const struct w1_family_ops w1_default_fops = { |
| .groups = w1_slave_default_groups, |
| }; |
| |
| static struct w1_family w1_default_family = { |
| .fops = &w1_default_fops, |
| }; |
| |
| static int w1_uevent(const struct device *dev, struct kobj_uevent_env *env); |
| |
| static struct bus_type w1_bus_type = { |
| .name = "w1", |
| .match = w1_master_match, |
| .uevent = w1_uevent, |
| }; |
| |
| struct device_driver w1_master_driver = { |
| .name = "w1_master_driver", |
| .bus = &w1_bus_type, |
| .probe = w1_master_probe, |
| }; |
| |
| struct device w1_master_device = { |
| .parent = NULL, |
| .bus = &w1_bus_type, |
| .init_name = "w1 bus master", |
| .driver = &w1_master_driver, |
| .release = &w1_master_release |
| }; |
| |
| static struct device_driver w1_slave_driver = { |
| .name = "w1_slave_driver", |
| .bus = &w1_bus_type, |
| }; |
| |
| #if 0 |
| struct device w1_slave_device = { |
| .parent = NULL, |
| .bus = &w1_bus_type, |
| .init_name = "w1 bus slave", |
| .driver = &w1_slave_driver, |
| .release = &w1_slave_release |
| }; |
| #endif /* 0 */ |
| |
| static ssize_t w1_master_attribute_show_name(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| ssize_t count; |
| |
| mutex_lock(&md->mutex); |
| count = sprintf(buf, "%s\n", md->name); |
| mutex_unlock(&md->mutex); |
| |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_store_search(struct device * dev, |
| struct device_attribute *attr, |
| const char * buf, size_t count) |
| { |
| long tmp; |
| struct w1_master *md = dev_to_w1_master(dev); |
| int ret; |
| |
| ret = kstrtol(buf, 0, &tmp); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&md->mutex); |
| md->search_count = tmp; |
| mutex_unlock(&md->mutex); |
| /* Only wake if it is going to be searching. */ |
| if (tmp) |
| wake_up_process(md->thread); |
| |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_show_search(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| ssize_t count; |
| |
| mutex_lock(&md->mutex); |
| count = sprintf(buf, "%d\n", md->search_count); |
| mutex_unlock(&md->mutex); |
| |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_store_pullup(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| long tmp; |
| struct w1_master *md = dev_to_w1_master(dev); |
| int ret; |
| |
| ret = kstrtol(buf, 0, &tmp); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&md->mutex); |
| md->enable_pullup = tmp; |
| mutex_unlock(&md->mutex); |
| |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_show_pullup(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| ssize_t count; |
| |
| mutex_lock(&md->mutex); |
| count = sprintf(buf, "%d\n", md->enable_pullup); |
| mutex_unlock(&md->mutex); |
| |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_show_pointer(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| ssize_t count; |
| |
| mutex_lock(&md->mutex); |
| count = sprintf(buf, "0x%p\n", md->bus_master); |
| mutex_unlock(&md->mutex); |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_show_timeout(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| ssize_t count; |
| count = sprintf(buf, "%d\n", w1_timeout); |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_show_timeout_us(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| ssize_t count; |
| count = sprintf(buf, "%d\n", w1_timeout_us); |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_store_max_slave_count(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int tmp; |
| struct w1_master *md = dev_to_w1_master(dev); |
| |
| if (kstrtoint(buf, 0, &tmp) || tmp < 1) |
| return -EINVAL; |
| |
| mutex_lock(&md->mutex); |
| md->max_slave_count = tmp; |
| /* allow each time the max_slave_count is updated */ |
| clear_bit(W1_WARN_MAX_COUNT, &md->flags); |
| mutex_unlock(&md->mutex); |
| |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_show_max_slave_count(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| ssize_t count; |
| |
| mutex_lock(&md->mutex); |
| count = sprintf(buf, "%d\n", md->max_slave_count); |
| mutex_unlock(&md->mutex); |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_show_attempts(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| ssize_t count; |
| |
| mutex_lock(&md->mutex); |
| count = sprintf(buf, "%lu\n", md->attempts); |
| mutex_unlock(&md->mutex); |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_show_slave_count(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| ssize_t count; |
| |
| mutex_lock(&md->mutex); |
| count = sprintf(buf, "%d\n", md->slave_count); |
| mutex_unlock(&md->mutex); |
| return count; |
| } |
| |
| static ssize_t w1_master_attribute_show_slaves(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| int c = PAGE_SIZE; |
| struct list_head *ent, *n; |
| struct w1_slave *sl = NULL; |
| |
| mutex_lock(&md->list_mutex); |
| |
| list_for_each_safe(ent, n, &md->slist) { |
| sl = list_entry(ent, struct w1_slave, w1_slave_entry); |
| |
| c -= snprintf(buf + PAGE_SIZE - c, c, "%s\n", sl->name); |
| } |
| if (!sl) |
| c -= snprintf(buf + PAGE_SIZE - c, c, "not found.\n"); |
| |
| mutex_unlock(&md->list_mutex); |
| |
| return PAGE_SIZE - c; |
| } |
| |
| static ssize_t w1_master_attribute_show_add(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int c = PAGE_SIZE; |
| c -= snprintf(buf+PAGE_SIZE - c, c, |
| "write device id xx-xxxxxxxxxxxx to add slave\n"); |
| return PAGE_SIZE - c; |
| } |
| |
| static int w1_atoreg_num(struct device *dev, const char *buf, size_t count, |
| struct w1_reg_num *rn) |
| { |
| unsigned int family; |
| unsigned long long id; |
| int i; |
| u64 rn64_le; |
| |
| /* The CRC value isn't read from the user because the sysfs directory |
| * doesn't include it and most messages from the bus search don't |
| * print it either. It would be unreasonable for the user to then |
| * provide it. |
| */ |
| const char *error_msg = "bad slave string format, expecting " |
| "ff-dddddddddddd\n"; |
| |
| if (buf[2] != '-') { |
| dev_err(dev, "%s", error_msg); |
| return -EINVAL; |
| } |
| i = sscanf(buf, "%02x-%012llx", &family, &id); |
| if (i != 2) { |
| dev_err(dev, "%s", error_msg); |
| return -EINVAL; |
| } |
| rn->family = family; |
| rn->id = id; |
| |
| rn64_le = cpu_to_le64(*(u64 *)rn); |
| rn->crc = w1_calc_crc8((u8 *)&rn64_le, 7); |
| |
| #if 0 |
| dev_info(dev, "With CRC device is %02x.%012llx.%02x.\n", |
| rn->family, (unsigned long long)rn->id, rn->crc); |
| #endif |
| |
| return 0; |
| } |
| |
| /* Searches the slaves in the w1_master and returns a pointer or NULL. |
| * Note: must not hold list_mutex |
| */ |
| struct w1_slave *w1_slave_search_device(struct w1_master *dev, |
| struct w1_reg_num *rn) |
| { |
| struct w1_slave *sl; |
| mutex_lock(&dev->list_mutex); |
| list_for_each_entry(sl, &dev->slist, w1_slave_entry) { |
| if (sl->reg_num.family == rn->family && |
| sl->reg_num.id == rn->id && |
| sl->reg_num.crc == rn->crc) { |
| mutex_unlock(&dev->list_mutex); |
| return sl; |
| } |
| } |
| mutex_unlock(&dev->list_mutex); |
| return NULL; |
| } |
| |
| static ssize_t w1_master_attribute_store_add(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| struct w1_reg_num rn; |
| struct w1_slave *sl; |
| ssize_t result = count; |
| |
| if (w1_atoreg_num(dev, buf, count, &rn)) |
| return -EINVAL; |
| |
| mutex_lock(&md->mutex); |
| sl = w1_slave_search_device(md, &rn); |
| /* It would be nice to do a targeted search one the one-wire bus |
| * for the new device to see if it is out there or not. But the |
| * current search doesn't support that. |
| */ |
| if (sl) { |
| dev_info(dev, "Device %s already exists\n", sl->name); |
| result = -EINVAL; |
| } else { |
| w1_attach_slave_device(md, &rn); |
| } |
| mutex_unlock(&md->mutex); |
| |
| return result; |
| } |
| |
| static ssize_t w1_master_attribute_show_remove(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int c = PAGE_SIZE; |
| c -= snprintf(buf+PAGE_SIZE - c, c, |
| "write device id xx-xxxxxxxxxxxx to remove slave\n"); |
| return PAGE_SIZE - c; |
| } |
| |
| static ssize_t w1_master_attribute_store_remove(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct w1_master *md = dev_to_w1_master(dev); |
| struct w1_reg_num rn; |
| struct w1_slave *sl; |
| ssize_t result = count; |
| |
| if (w1_atoreg_num(dev, buf, count, &rn)) |
| return -EINVAL; |
| |
| mutex_lock(&md->mutex); |
| sl = w1_slave_search_device(md, &rn); |
| if (sl) { |
| result = w1_slave_detach(sl); |
| /* refcnt 0 means it was detached in the call */ |
| if (result == 0) |
| result = count; |
| } else { |
| dev_info(dev, "Device %02x-%012llx doesn't exists\n", rn.family, |
| (unsigned long long)rn.id); |
| result = -EINVAL; |
| } |
| mutex_unlock(&md->mutex); |
| |
| return result; |
| } |
| |
| #define W1_MASTER_ATTR_RO(_name, _mode) \ |
| struct device_attribute w1_master_attribute_##_name = \ |
| __ATTR(w1_master_##_name, _mode, \ |
| w1_master_attribute_show_##_name, NULL) |
| |
| #define W1_MASTER_ATTR_RW(_name, _mode) \ |
| struct device_attribute w1_master_attribute_##_name = \ |
| __ATTR(w1_master_##_name, _mode, \ |
| w1_master_attribute_show_##_name, \ |
| w1_master_attribute_store_##_name) |
| |
| static W1_MASTER_ATTR_RO(name, S_IRUGO); |
| static W1_MASTER_ATTR_RO(slaves, S_IRUGO); |
| static W1_MASTER_ATTR_RO(slave_count, S_IRUGO); |
| static W1_MASTER_ATTR_RW(max_slave_count, S_IRUGO | S_IWUSR | S_IWGRP); |
| static W1_MASTER_ATTR_RO(attempts, S_IRUGO); |
| static W1_MASTER_ATTR_RO(timeout, S_IRUGO); |
| static W1_MASTER_ATTR_RO(timeout_us, S_IRUGO); |
| static W1_MASTER_ATTR_RO(pointer, S_IRUGO); |
| static W1_MASTER_ATTR_RW(search, S_IRUGO | S_IWUSR | S_IWGRP); |
| static W1_MASTER_ATTR_RW(pullup, S_IRUGO | S_IWUSR | S_IWGRP); |
| static W1_MASTER_ATTR_RW(add, S_IRUGO | S_IWUSR | S_IWGRP); |
| static W1_MASTER_ATTR_RW(remove, S_IRUGO | S_IWUSR | S_IWGRP); |
| |
| static struct attribute *w1_master_default_attrs[] = { |
| &w1_master_attribute_name.attr, |
| &w1_master_attribute_slaves.attr, |
| &w1_master_attribute_slave_count.attr, |
| &w1_master_attribute_max_slave_count.attr, |
| &w1_master_attribute_attempts.attr, |
| &w1_master_attribute_timeout.attr, |
| &w1_master_attribute_timeout_us.attr, |
| &w1_master_attribute_pointer.attr, |
| &w1_master_attribute_search.attr, |
| &w1_master_attribute_pullup.attr, |
| &w1_master_attribute_add.attr, |
| &w1_master_attribute_remove.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group w1_master_defattr_group = { |
| .attrs = w1_master_default_attrs, |
| }; |
| |
| int w1_create_master_attributes(struct w1_master *master) |
| { |
| return sysfs_create_group(&master->dev.kobj, &w1_master_defattr_group); |
| } |
| |
| void w1_destroy_master_attributes(struct w1_master *master) |
| { |
| sysfs_remove_group(&master->dev.kobj, &w1_master_defattr_group); |
| } |
| |
| static int w1_uevent(const struct device *dev, struct kobj_uevent_env *env) |
| { |
| const struct w1_master *md = NULL; |
| const struct w1_slave *sl = NULL; |
| const char *event_owner, *name; |
| int err = 0; |
| |
| if (dev->driver == &w1_master_driver) { |
| md = container_of(dev, struct w1_master, dev); |
| event_owner = "master"; |
| name = md->name; |
| } else if (dev->driver == &w1_slave_driver) { |
| sl = container_of(dev, struct w1_slave, dev); |
| event_owner = "slave"; |
| name = sl->name; |
| } else { |
| dev_dbg(dev, "Unknown event.\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "Hotplug event for %s %s, bus_id=%s.\n", |
| event_owner, name, dev_name(dev)); |
| |
| if (dev->driver != &w1_slave_driver || !sl) |
| goto end; |
| |
| err = add_uevent_var(env, "W1_FID=%02X", sl->reg_num.family); |
| if (err) |
| goto end; |
| |
| err = add_uevent_var(env, "W1_SLAVE_ID=%024LX", |
| (unsigned long long)sl->reg_num.id); |
| end: |
| return err; |
| } |
| |
| static int w1_family_notify(unsigned long action, struct w1_slave *sl) |
| { |
| const struct w1_family_ops *fops; |
| int err; |
| |
| fops = sl->family->fops; |
| |
| if (!fops) |
| return 0; |
| |
| switch (action) { |
| case BUS_NOTIFY_ADD_DEVICE: |
| /* if the family driver needs to initialize something... */ |
| if (fops->add_slave) { |
| err = fops->add_slave(sl); |
| if (err < 0) { |
| dev_err(&sl->dev, |
| "add_slave() call failed. err=%d\n", |
| err); |
| return err; |
| } |
| } |
| if (fops->groups) { |
| err = sysfs_create_groups(&sl->dev.kobj, fops->groups); |
| if (err) { |
| dev_err(&sl->dev, |
| "sysfs group creation failed. err=%d\n", |
| err); |
| return err; |
| } |
| } |
| if (IS_REACHABLE(CONFIG_HWMON) && fops->chip_info) { |
| struct device *hwmon |
| = hwmon_device_register_with_info(&sl->dev, |
| "w1_slave_temp", sl, |
| fops->chip_info, |
| NULL); |
| if (IS_ERR(hwmon)) { |
| dev_warn(&sl->dev, |
| "could not create hwmon device\n"); |
| } else { |
| sl->hwmon = hwmon; |
| } |
| } |
| break; |
| case BUS_NOTIFY_DEL_DEVICE: |
| if (IS_REACHABLE(CONFIG_HWMON) && fops->chip_info && |
| sl->hwmon) |
| hwmon_device_unregister(sl->hwmon); |
| if (fops->remove_slave) |
| sl->family->fops->remove_slave(sl); |
| if (fops->groups) |
| sysfs_remove_groups(&sl->dev.kobj, fops->groups); |
| break; |
| } |
| return 0; |
| } |
| |
| static int __w1_attach_slave_device(struct w1_slave *sl) |
| { |
| int err; |
| |
| sl->dev.parent = &sl->master->dev; |
| sl->dev.driver = &w1_slave_driver; |
| sl->dev.bus = &w1_bus_type; |
| sl->dev.release = &w1_slave_release; |
| sl->dev.groups = w1_slave_groups; |
| sl->dev.of_node = of_find_matching_node(sl->master->dev.of_node, |
| sl->family->of_match_table); |
| |
| dev_set_name(&sl->dev, "%02x-%012llx", |
| (unsigned int) sl->reg_num.family, |
| (unsigned long long) sl->reg_num.id); |
| snprintf(&sl->name[0], sizeof(sl->name), |
| "%02x-%012llx", |
| (unsigned int) sl->reg_num.family, |
| (unsigned long long) sl->reg_num.id); |
| |
| dev_dbg(&sl->dev, "%s: registering %s as %p.\n", __func__, |
| dev_name(&sl->dev), sl); |
| |
| /* suppress for w1_family_notify before sending KOBJ_ADD */ |
| dev_set_uevent_suppress(&sl->dev, true); |
| |
| err = device_register(&sl->dev); |
| if (err < 0) { |
| dev_err(&sl->dev, |
| "Device registration [%s] failed. err=%d\n", |
| dev_name(&sl->dev), err); |
| put_device(&sl->dev); |
| return err; |
| } |
| w1_family_notify(BUS_NOTIFY_ADD_DEVICE, sl); |
| |
| dev_set_uevent_suppress(&sl->dev, false); |
| kobject_uevent(&sl->dev.kobj, KOBJ_ADD); |
| |
| mutex_lock(&sl->master->list_mutex); |
| list_add_tail(&sl->w1_slave_entry, &sl->master->slist); |
| mutex_unlock(&sl->master->list_mutex); |
| |
| return 0; |
| } |
| |
| int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn) |
| { |
| struct w1_slave *sl; |
| struct w1_family *f; |
| int err; |
| struct w1_netlink_msg msg; |
| |
| sl = kzalloc(sizeof(struct w1_slave), GFP_KERNEL); |
| if (!sl) { |
| dev_err(&dev->dev, |
| "%s: failed to allocate new slave device.\n", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| |
| sl->owner = THIS_MODULE; |
| sl->master = dev; |
| set_bit(W1_SLAVE_ACTIVE, &sl->flags); |
| |
| memset(&msg, 0, sizeof(msg)); |
| memcpy(&sl->reg_num, rn, sizeof(sl->reg_num)); |
| atomic_set(&sl->refcnt, 1); |
| atomic_inc(&sl->master->refcnt); |
| dev->slave_count++; |
| dev_info(&dev->dev, "Attaching one wire slave %02x.%012llx crc %02x\n", |
| rn->family, (unsigned long long)rn->id, rn->crc); |
| |
| /* slave modules need to be loaded in a context with unlocked mutex */ |
| mutex_unlock(&dev->mutex); |
| request_module("w1-family-0x%02X", rn->family); |
| mutex_lock(&dev->mutex); |
| |
| spin_lock(&w1_flock); |
| f = w1_family_registered(rn->family); |
| if (!f) { |
| f= &w1_default_family; |
| dev_info(&dev->dev, "Family %x for %02x.%012llx.%02x is not registered.\n", |
| rn->family, rn->family, |
| (unsigned long long)rn->id, rn->crc); |
| } |
| __w1_family_get(f); |
| spin_unlock(&w1_flock); |
| |
| sl->family = f; |
| |
| err = __w1_attach_slave_device(sl); |
| if (err < 0) { |
| dev_err(&dev->dev, "%s: Attaching %s failed.\n", __func__, |
| sl->name); |
| dev->slave_count--; |
| w1_family_put(sl->family); |
| atomic_dec(&sl->master->refcnt); |
| kfree(sl); |
| return err; |
| } |
| |
| sl->ttl = dev->slave_ttl; |
| |
| memcpy(msg.id.id, rn, sizeof(msg.id)); |
| msg.type = W1_SLAVE_ADD; |
| w1_netlink_send(dev, &msg); |
| |
| return 0; |
| } |
| |
| int w1_unref_slave(struct w1_slave *sl) |
| { |
| struct w1_master *dev = sl->master; |
| int refcnt; |
| mutex_lock(&dev->list_mutex); |
| refcnt = atomic_sub_return(1, &sl->refcnt); |
| if (refcnt == 0) { |
| struct w1_netlink_msg msg; |
| |
| dev_dbg(&sl->dev, "%s: detaching %s [%p].\n", __func__, |
| sl->name, sl); |
| |
| list_del(&sl->w1_slave_entry); |
| |
| memset(&msg, 0, sizeof(msg)); |
| memcpy(msg.id.id, &sl->reg_num, sizeof(msg.id)); |
| msg.type = W1_SLAVE_REMOVE; |
| w1_netlink_send(sl->master, &msg); |
| |
| w1_family_notify(BUS_NOTIFY_DEL_DEVICE, sl); |
| device_unregister(&sl->dev); |
| #ifdef DEBUG |
| memset(sl, 0, sizeof(*sl)); |
| #endif |
| kfree(sl); |
| } |
| atomic_dec(&dev->refcnt); |
| mutex_unlock(&dev->list_mutex); |
| return refcnt; |
| } |
| |
| int w1_slave_detach(struct w1_slave *sl) |
| { |
| /* Only detach a slave once as it decreases the refcnt each time. */ |
| int destroy_now; |
| mutex_lock(&sl->master->list_mutex); |
| destroy_now = !test_bit(W1_SLAVE_DETACH, &sl->flags); |
| set_bit(W1_SLAVE_DETACH, &sl->flags); |
| mutex_unlock(&sl->master->list_mutex); |
| |
| if (destroy_now) |
| destroy_now = !w1_unref_slave(sl); |
| return destroy_now ? 0 : -EBUSY; |
| } |
| |
| struct w1_master *w1_search_master_id(u32 id) |
| { |
| struct w1_master *dev; |
| int found = 0; |
| |
| mutex_lock(&w1_mlock); |
| list_for_each_entry(dev, &w1_masters, w1_master_entry) { |
| if (dev->id == id) { |
| found = 1; |
| atomic_inc(&dev->refcnt); |
| break; |
| } |
| } |
| mutex_unlock(&w1_mlock); |
| |
| return (found)?dev:NULL; |
| } |
| |
| struct w1_slave *w1_search_slave(struct w1_reg_num *id) |
| { |
| struct w1_master *dev; |
| struct w1_slave *sl = NULL; |
| int found = 0; |
| |
| mutex_lock(&w1_mlock); |
| list_for_each_entry(dev, &w1_masters, w1_master_entry) { |
| mutex_lock(&dev->list_mutex); |
| list_for_each_entry(sl, &dev->slist, w1_slave_entry) { |
| if (sl->reg_num.family == id->family && |
| sl->reg_num.id == id->id && |
| sl->reg_num.crc == id->crc) { |
| found = 1; |
| atomic_inc(&dev->refcnt); |
| atomic_inc(&sl->refcnt); |
| break; |
| } |
| } |
| mutex_unlock(&dev->list_mutex); |
| |
| if (found) |
| break; |
| } |
| mutex_unlock(&w1_mlock); |
| |
| return (found)?sl:NULL; |
| } |
| |
| void w1_reconnect_slaves(struct w1_family *f, int attach) |
| { |
| struct w1_slave *sl, *sln; |
| struct w1_master *dev; |
| |
| mutex_lock(&w1_mlock); |
| list_for_each_entry(dev, &w1_masters, w1_master_entry) { |
| dev_dbg(&dev->dev, "Reconnecting slaves in device %s " |
| "for family %02x.\n", dev->name, f->fid); |
| mutex_lock(&dev->mutex); |
| mutex_lock(&dev->list_mutex); |
| list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) { |
| /* If it is a new family, slaves with the default |
| * family driver and are that family will be |
| * connected. If the family is going away, devices |
| * matching that family are reconneced. |
| */ |
| if ((attach && sl->family->fid == W1_FAMILY_DEFAULT |
| && sl->reg_num.family == f->fid) || |
| (!attach && sl->family->fid == f->fid)) { |
| struct w1_reg_num rn; |
| |
| mutex_unlock(&dev->list_mutex); |
| memcpy(&rn, &sl->reg_num, sizeof(rn)); |
| /* If it was already in use let the automatic |
| * scan pick it up again later. |
| */ |
| if (!w1_slave_detach(sl)) |
| w1_attach_slave_device(dev, &rn); |
| mutex_lock(&dev->list_mutex); |
| } |
| } |
| dev_dbg(&dev->dev, "Reconnecting slaves in device %s " |
| "has been finished.\n", dev->name); |
| mutex_unlock(&dev->list_mutex); |
| mutex_unlock(&dev->mutex); |
| } |
| mutex_unlock(&w1_mlock); |
| } |
| |
| static int w1_addr_crc_is_valid(struct w1_master *dev, u64 rn) |
| { |
| u64 rn_le = cpu_to_le64(rn); |
| struct w1_reg_num *tmp = (struct w1_reg_num *)&rn; |
| u8 crc; |
| |
| crc = w1_calc_crc8((u8 *)&rn_le, 7); |
| |
| /* quirk: |
| * DS28E04 (1w eeprom) has strapping pins to change |
| * address, but will not update the crc. So normal rules |
| * for consistent w1 addresses are violated. We test |
| * with the 7 LSBs of the address forced high. |
| * |
| * (char*)&rn_le = { family, addr_lsb, ..., addr_msb, crc }. |
| */ |
| if (crc != tmp->crc && tmp->family == W1_FAMILY_DS28E04) { |
| u64 corr_le = rn_le; |
| |
| ((u8 *)&corr_le)[1] |= 0x7f; |
| crc = w1_calc_crc8((u8 *)&corr_le, 7); |
| |
| dev_info(&dev->dev, "DS28E04 crc workaround on %02x.%012llx.%02x\n", |
| tmp->family, (unsigned long long)tmp->id, tmp->crc); |
| } |
| |
| if (crc != tmp->crc) { |
| dev_dbg(&dev->dev, "w1 addr crc mismatch: %02x.%012llx.%02x != 0x%02x.\n", |
| tmp->family, (unsigned long long)tmp->id, tmp->crc, crc); |
| return 0; |
| } |
| return 1; |
| } |
| |
| void w1_slave_found(struct w1_master *dev, u64 rn) |
| { |
| struct w1_slave *sl; |
| struct w1_reg_num *tmp; |
| |
| atomic_inc(&dev->refcnt); |
| |
| tmp = (struct w1_reg_num *) &rn; |
| |
| sl = w1_slave_search_device(dev, tmp); |
| if (sl) { |
| set_bit(W1_SLAVE_ACTIVE, &sl->flags); |
| } else { |
| if (rn && w1_addr_crc_is_valid(dev, rn)) |
| w1_attach_slave_device(dev, tmp); |
| } |
| |
| atomic_dec(&dev->refcnt); |
| } |
| |
| /** |
| * w1_search() - Performs a ROM Search & registers any devices found. |
| * @dev: The master device to search |
| * @search_type: W1_SEARCH to search all devices, or W1_ALARM_SEARCH |
| * to return only devices in the alarmed state |
| * @cb: Function to call when a device is found |
| * |
| * The 1-wire search is a simple binary tree search. |
| * For each bit of the address, we read two bits and write one bit. |
| * The bit written will put to sleep all devies that don't match that bit. |
| * When the two reads differ, the direction choice is obvious. |
| * When both bits are 0, we must choose a path to take. |
| * When we can scan all 64 bits without having to choose a path, we are done. |
| * |
| * See "Application note 187 1-wire search algorithm" at www.maxim-ic.com |
| * |
| */ |
| void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb) |
| { |
| u64 last_rn, rn, tmp64; |
| int i, slave_count = 0; |
| int last_zero, last_device; |
| int search_bit, desc_bit; |
| u8 triplet_ret = 0; |
| |
| search_bit = 0; |
| rn = dev->search_id; |
| last_rn = 0; |
| last_device = 0; |
| last_zero = -1; |
| |
| desc_bit = 64; |
| |
| while ( !last_device && (slave_count++ < dev->max_slave_count) ) { |
| last_rn = rn; |
| rn = 0; |
| |
| /* |
| * Reset bus and all 1-wire device state machines |
| * so they can respond to our requests. |
| * |
| * Return 0 - device(s) present, 1 - no devices present. |
| */ |
| mutex_lock(&dev->bus_mutex); |
| if (w1_reset_bus(dev)) { |
| mutex_unlock(&dev->bus_mutex); |
| dev_dbg(&dev->dev, "No devices present on the wire.\n"); |
| break; |
| } |
| |
| /* Do fast search on single slave bus */ |
| if (dev->max_slave_count == 1) { |
| int rv; |
| w1_write_8(dev, W1_READ_ROM); |
| rv = w1_read_block(dev, (u8 *)&rn, 8); |
| mutex_unlock(&dev->bus_mutex); |
| |
| if (rv == 8 && rn) |
| cb(dev, rn); |
| |
| break; |
| } |
| |
| /* Start the search */ |
| w1_write_8(dev, search_type); |
| for (i = 0; i < 64; ++i) { |
| /* Determine the direction/search bit */ |
| if (i == desc_bit) |
| search_bit = 1; /* took the 0 path last time, so take the 1 path */ |
| else if (i > desc_bit) |
| search_bit = 0; /* take the 0 path on the next branch */ |
| else |
| search_bit = ((last_rn >> i) & 0x1); |
| |
| /* Read two bits and write one bit */ |
| triplet_ret = w1_triplet(dev, search_bit); |
| |
| /* quit if no device responded */ |
| if ( (triplet_ret & 0x03) == 0x03 ) |
| break; |
| |
| /* If both directions were valid, and we took the 0 path... */ |
| if (triplet_ret == 0) |
| last_zero = i; |
| |
| /* extract the direction taken & update the device number */ |
| tmp64 = (triplet_ret >> 2); |
| rn |= (tmp64 << i); |
| |
| if (test_bit(W1_ABORT_SEARCH, &dev->flags)) { |
| mutex_unlock(&dev->bus_mutex); |
| dev_dbg(&dev->dev, "Abort w1_search\n"); |
| return; |
| } |
| } |
| mutex_unlock(&dev->bus_mutex); |
| |
| if ( (triplet_ret & 0x03) != 0x03 ) { |
| if ((desc_bit == last_zero) || (last_zero < 0)) { |
| last_device = 1; |
| dev->search_id = 0; |
| } else { |
| dev->search_id = rn; |
| } |
| desc_bit = last_zero; |
| cb(dev, rn); |
| } |
| |
| if (!last_device && slave_count == dev->max_slave_count && |
| !test_bit(W1_WARN_MAX_COUNT, &dev->flags)) { |
| /* Only max_slave_count will be scanned in a search, |
| * but it will start where it left off next search |
| * until all ids are identified and then it will start |
| * over. A continued search will report the previous |
| * last id as the first id (provided it is still on the |
| * bus). |
| */ |
| dev_info(&dev->dev, "%s: max_slave_count %d reached, " |
| "will continue next search.\n", __func__, |
| dev->max_slave_count); |
| set_bit(W1_WARN_MAX_COUNT, &dev->flags); |
| } |
| } |
| } |
| |
| void w1_search_process_cb(struct w1_master *dev, u8 search_type, |
| w1_slave_found_callback cb) |
| { |
| struct w1_slave *sl, *sln; |
| |
| mutex_lock(&dev->list_mutex); |
| list_for_each_entry(sl, &dev->slist, w1_slave_entry) |
| clear_bit(W1_SLAVE_ACTIVE, &sl->flags); |
| mutex_unlock(&dev->list_mutex); |
| |
| w1_search_devices(dev, search_type, cb); |
| |
| mutex_lock(&dev->list_mutex); |
| list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) { |
| if (!test_bit(W1_SLAVE_ACTIVE, &sl->flags) && !--sl->ttl) { |
| mutex_unlock(&dev->list_mutex); |
| w1_slave_detach(sl); |
| mutex_lock(&dev->list_mutex); |
| } |
| else if (test_bit(W1_SLAVE_ACTIVE, &sl->flags)) |
| sl->ttl = dev->slave_ttl; |
| } |
| mutex_unlock(&dev->list_mutex); |
| |
| if (dev->search_count > 0) |
| dev->search_count--; |
| } |
| |
| static void w1_search_process(struct w1_master *dev, u8 search_type) |
| { |
| w1_search_process_cb(dev, search_type, w1_slave_found); |
| } |
| |
| /** |
| * w1_process_callbacks() - execute each dev->async_list callback entry |
| * @dev: w1_master device |
| * |
| * The w1 master list_mutex must be held. |
| * |
| * Return: 1 if there were commands to executed 0 otherwise |
| */ |
| int w1_process_callbacks(struct w1_master *dev) |
| { |
| int ret = 0; |
| struct w1_async_cmd *async_cmd, *async_n; |
| |
| /* The list can be added to in another thread, loop until it is empty */ |
| while (!list_empty(&dev->async_list)) { |
| list_for_each_entry_safe(async_cmd, async_n, &dev->async_list, |
| async_entry) { |
| /* drop the lock, if it is a search it can take a long |
| * time */ |
| mutex_unlock(&dev->list_mutex); |
| async_cmd->cb(dev, async_cmd); |
| ret = 1; |
| mutex_lock(&dev->list_mutex); |
| } |
| } |
| return ret; |
| } |
| |
| int w1_process(void *data) |
| { |
| struct w1_master *dev = (struct w1_master *) data; |
| /* As long as w1_timeout is only set by a module parameter the sleep |
| * time can be calculated in jiffies once. |
| */ |
| const unsigned long jtime = |
| usecs_to_jiffies(w1_timeout * 1000000 + w1_timeout_us); |
| /* remainder if it woke up early */ |
| unsigned long jremain = 0; |
| |
| atomic_inc(&dev->refcnt); |
| |
| for (;;) { |
| |
| if (!jremain && dev->search_count) { |
| mutex_lock(&dev->mutex); |
| w1_search_process(dev, W1_SEARCH); |
| mutex_unlock(&dev->mutex); |
| } |
| |
| mutex_lock(&dev->list_mutex); |
| /* Note, w1_process_callback drops the lock while processing, |
| * but locks it again before returning. |
| */ |
| if (!w1_process_callbacks(dev) && jremain) { |
| /* a wake up is either to stop the thread, process |
| * callbacks, or search, it isn't process callbacks, so |
| * schedule a search. |
| */ |
| jremain = 1; |
| } |
| |
| __set_current_state(TASK_INTERRUPTIBLE); |
| |
| /* hold list_mutex until after interruptible to prevent loosing |
| * the wakeup signal when async_cmd is added. |
| */ |
| mutex_unlock(&dev->list_mutex); |
| |
| if (kthread_should_stop()) { |
| __set_current_state(TASK_RUNNING); |
| break; |
| } |
| |
| /* Only sleep when the search is active. */ |
| if (dev->search_count) { |
| if (!jremain) |
| jremain = jtime; |
| jremain = schedule_timeout(jremain); |
| } |
| else |
| schedule(); |
| } |
| |
| atomic_dec(&dev->refcnt); |
| |
| return 0; |
| } |
| |
| static int __init w1_init(void) |
| { |
| int retval; |
| |
| pr_info("Driver for 1-wire Dallas network protocol.\n"); |
| |
| w1_init_netlink(); |
| |
| retval = bus_register(&w1_bus_type); |
| if (retval) { |
| pr_err("Failed to register bus. err=%d.\n", retval); |
| goto err_out_exit_init; |
| } |
| |
| retval = driver_register(&w1_master_driver); |
| if (retval) { |
| pr_err("Failed to register master driver. err=%d.\n", |
| retval); |
| goto err_out_bus_unregister; |
| } |
| |
| retval = driver_register(&w1_slave_driver); |
| if (retval) { |
| pr_err("Failed to register slave driver. err=%d.\n", |
| retval); |
| goto err_out_master_unregister; |
| } |
| |
| return 0; |
| |
| #if 0 |
| /* For undoing the slave register if there was a step after it. */ |
| err_out_slave_unregister: |
| driver_unregister(&w1_slave_driver); |
| #endif |
| |
| err_out_master_unregister: |
| driver_unregister(&w1_master_driver); |
| |
| err_out_bus_unregister: |
| bus_unregister(&w1_bus_type); |
| |
| err_out_exit_init: |
| return retval; |
| } |
| |
| static void __exit w1_fini(void) |
| { |
| struct w1_master *dev; |
| |
| /* Set netlink removal messages and some cleanup */ |
| list_for_each_entry(dev, &w1_masters, w1_master_entry) |
| __w1_remove_master_device(dev); |
| |
| w1_fini_netlink(); |
| |
| driver_unregister(&w1_slave_driver); |
| driver_unregister(&w1_master_driver); |
| bus_unregister(&w1_bus_type); |
| } |
| |
| module_init(w1_init); |
| module_exit(w1_fini); |
| |
| MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); |
| MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol."); |
| MODULE_LICENSE("GPL"); |