| /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ |
| /* |
| * Copyright 2013-2016 Freescale Semiconductor Inc. |
| * Copyright 2017-2018 NXP |
| */ |
| #ifndef _DPSECI_H_ |
| #define _DPSECI_H_ |
| |
| /* |
| * Data Path SEC Interface API |
| * Contains initialization APIs and runtime control APIs for DPSECI |
| */ |
| |
| struct fsl_mc_io; |
| |
| /** |
| * General DPSECI macros |
| */ |
| |
| /** |
| * Maximum number of Tx/Rx queues per DPSECI object |
| */ |
| #define DPSECI_MAX_QUEUE_NUM 16 |
| |
| /** |
| * All queues considered; see dpseci_set_rx_queue() |
| */ |
| #define DPSECI_ALL_QUEUES (u8)(-1) |
| |
| int dpseci_open(struct fsl_mc_io *mc_io, u32 cmd_flags, int dpseci_id, |
| u16 *token); |
| |
| int dpseci_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token); |
| |
| /** |
| * Enable the Congestion Group support |
| */ |
| #define DPSECI_OPT_HAS_CG 0x000020 |
| |
| /** |
| * struct dpseci_cfg - Structure representing DPSECI configuration |
| * @options: Any combination of the following flags: |
| * DPSECI_OPT_HAS_CG |
| * @num_tx_queues: num of queues towards the SEC |
| * @num_rx_queues: num of queues back from the SEC |
| * @priorities: Priorities for the SEC hardware processing; |
| * each place in the array is the priority of the tx queue |
| * towards the SEC; |
| * valid priorities are configured with values 1-8; |
| */ |
| struct dpseci_cfg { |
| u32 options; |
| u8 num_tx_queues; |
| u8 num_rx_queues; |
| u8 priorities[DPSECI_MAX_QUEUE_NUM]; |
| }; |
| |
| int dpseci_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token); |
| |
| int dpseci_disable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token); |
| |
| int dpseci_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token); |
| |
| int dpseci_is_enabled(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, |
| int *en); |
| |
| /** |
| * struct dpseci_attr - Structure representing DPSECI attributes |
| * @id: DPSECI object ID |
| * @num_tx_queues: number of queues towards the SEC |
| * @num_rx_queues: number of queues back from the SEC |
| * @options: any combination of the following flags: |
| * DPSECI_OPT_HAS_CG |
| */ |
| struct dpseci_attr { |
| int id; |
| u8 num_tx_queues; |
| u8 num_rx_queues; |
| u32 options; |
| }; |
| |
| int dpseci_get_attributes(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, |
| struct dpseci_attr *attr); |
| |
| /** |
| * enum dpseci_dest - DPSECI destination types |
| * @DPSECI_DEST_NONE: Unassigned destination; The queue is set in parked mode |
| * and does not generate FQDAN notifications; user is expected to dequeue |
| * from the queue based on polling or other user-defined method |
| * @DPSECI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN |
| * notifications to the specified DPIO; user is expected to dequeue from |
| * the queue only after notification is received |
| * @DPSECI_DEST_DPCON: The queue is set in schedule mode and does not generate |
| * FQDAN notifications, but is connected to the specified DPCON object; |
| * user is expected to dequeue from the DPCON channel |
| */ |
| enum dpseci_dest { |
| DPSECI_DEST_NONE = 0, |
| DPSECI_DEST_DPIO, |
| DPSECI_DEST_DPCON |
| }; |
| |
| /** |
| * struct dpseci_dest_cfg - Structure representing DPSECI destination parameters |
| * @dest_type: Destination type |
| * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type |
| * @priority: Priority selection within the DPIO or DPCON channel; valid values |
| * are 0-1 or 0-7, depending on the number of priorities in that channel; |
| * not relevant for 'DPSECI_DEST_NONE' option |
| */ |
| struct dpseci_dest_cfg { |
| enum dpseci_dest dest_type; |
| int dest_id; |
| u8 priority; |
| }; |
| |
| /** |
| * DPSECI queue modification options |
| */ |
| |
| /** |
| * Select to modify the user's context associated with the queue |
| */ |
| #define DPSECI_QUEUE_OPT_USER_CTX 0x00000001 |
| |
| /** |
| * Select to modify the queue's destination |
| */ |
| #define DPSECI_QUEUE_OPT_DEST 0x00000002 |
| |
| /** |
| * Select to modify the queue's order preservation |
| */ |
| #define DPSECI_QUEUE_OPT_ORDER_PRESERVATION 0x00000004 |
| |
| /** |
| * struct dpseci_rx_queue_cfg - DPSECI RX queue configuration |
| * @options: Flags representing the suggested modifications to the queue; |
| * Use any combination of 'DPSECI_QUEUE_OPT_<X>' flags |
| * @order_preservation_en: order preservation configuration for the rx queue |
| * valid only if 'DPSECI_QUEUE_OPT_ORDER_PRESERVATION' is contained in 'options' |
| * @user_ctx: User context value provided in the frame descriptor of each |
| * dequeued frame; valid only if 'DPSECI_QUEUE_OPT_USER_CTX' is contained |
| * in 'options' |
| * @dest_cfg: Queue destination parameters; valid only if |
| * 'DPSECI_QUEUE_OPT_DEST' is contained in 'options' |
| */ |
| struct dpseci_rx_queue_cfg { |
| u32 options; |
| int order_preservation_en; |
| u64 user_ctx; |
| struct dpseci_dest_cfg dest_cfg; |
| }; |
| |
| int dpseci_set_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, |
| u8 queue, const struct dpseci_rx_queue_cfg *cfg); |
| |
| /** |
| * struct dpseci_rx_queue_attr - Structure representing attributes of Rx queues |
| * @user_ctx: User context value provided in the frame descriptor of each |
| * dequeued frame |
| * @order_preservation_en: Status of the order preservation configuration on the |
| * queue |
| * @dest_cfg: Queue destination configuration |
| * @fqid: Virtual FQID value to be used for dequeue operations |
| */ |
| struct dpseci_rx_queue_attr { |
| u64 user_ctx; |
| int order_preservation_en; |
| struct dpseci_dest_cfg dest_cfg; |
| u32 fqid; |
| }; |
| |
| int dpseci_get_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, |
| u8 queue, struct dpseci_rx_queue_attr *attr); |
| |
| /** |
| * struct dpseci_tx_queue_attr - Structure representing attributes of Tx queues |
| * @fqid: Virtual FQID to be used for sending frames to SEC hardware |
| * @priority: SEC hardware processing priority for the queue |
| */ |
| struct dpseci_tx_queue_attr { |
| u32 fqid; |
| u8 priority; |
| }; |
| |
| int dpseci_get_tx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, |
| u8 queue, struct dpseci_tx_queue_attr *attr); |
| |
| /** |
| * struct dpseci_sec_attr - Structure representing attributes of the SEC |
| * hardware accelerator |
| * @ip_id: ID for SEC |
| * @major_rev: Major revision number for SEC |
| * @minor_rev: Minor revision number for SEC |
| * @era: SEC Era |
| * @deco_num: The number of copies of the DECO that are implemented in this |
| * version of SEC |
| * @zuc_auth_acc_num: The number of copies of ZUCA that are implemented in this |
| * version of SEC |
| * @zuc_enc_acc_num: The number of copies of ZUCE that are implemented in this |
| * version of SEC |
| * @snow_f8_acc_num: The number of copies of the SNOW-f8 module that are |
| * implemented in this version of SEC |
| * @snow_f9_acc_num: The number of copies of the SNOW-f9 module that are |
| * implemented in this version of SEC |
| * @crc_acc_num: The number of copies of the CRC module that are implemented in |
| * this version of SEC |
| * @pk_acc_num: The number of copies of the Public Key module that are |
| * implemented in this version of SEC |
| * @kasumi_acc_num: The number of copies of the Kasumi module that are |
| * implemented in this version of SEC |
| * @rng_acc_num: The number of copies of the Random Number Generator that are |
| * implemented in this version of SEC |
| * @md_acc_num: The number of copies of the MDHA (Hashing module) that are |
| * implemented in this version of SEC |
| * @arc4_acc_num: The number of copies of the ARC4 module that are implemented |
| * in this version of SEC |
| * @des_acc_num: The number of copies of the DES module that are implemented in |
| * this version of SEC |
| * @aes_acc_num: The number of copies of the AES module that are implemented in |
| * this version of SEC |
| * @ccha_acc_num: The number of copies of the ChaCha20 module that are |
| * implemented in this version of SEC. |
| * @ptha_acc_num: The number of copies of the Poly1305 module that are |
| * implemented in this version of SEC. |
| **/ |
| struct dpseci_sec_attr { |
| u16 ip_id; |
| u8 major_rev; |
| u8 minor_rev; |
| u8 era; |
| u8 deco_num; |
| u8 zuc_auth_acc_num; |
| u8 zuc_enc_acc_num; |
| u8 snow_f8_acc_num; |
| u8 snow_f9_acc_num; |
| u8 crc_acc_num; |
| u8 pk_acc_num; |
| u8 kasumi_acc_num; |
| u8 rng_acc_num; |
| u8 md_acc_num; |
| u8 arc4_acc_num; |
| u8 des_acc_num; |
| u8 aes_acc_num; |
| u8 ccha_acc_num; |
| u8 ptha_acc_num; |
| }; |
| |
| int dpseci_get_sec_attr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, |
| struct dpseci_sec_attr *attr); |
| |
| int dpseci_get_api_version(struct fsl_mc_io *mc_io, u32 cmd_flags, |
| u16 *major_ver, u16 *minor_ver); |
| |
| /** |
| * enum dpseci_congestion_unit - DPSECI congestion units |
| * @DPSECI_CONGESTION_UNIT_BYTES: bytes units |
| * @DPSECI_CONGESTION_UNIT_FRAMES: frames units |
| */ |
| enum dpseci_congestion_unit { |
| DPSECI_CONGESTION_UNIT_BYTES = 0, |
| DPSECI_CONGESTION_UNIT_FRAMES |
| }; |
| |
| /** |
| * CSCN message is written to message_iova once entering a |
| * congestion state (see 'threshold_entry') |
| */ |
| #define DPSECI_CGN_MODE_WRITE_MEM_ON_ENTER 0x00000001 |
| |
| /** |
| * CSCN message is written to message_iova once exiting a |
| * congestion state (see 'threshold_exit') |
| */ |
| #define DPSECI_CGN_MODE_WRITE_MEM_ON_EXIT 0x00000002 |
| |
| /** |
| * CSCN write will attempt to allocate into a cache (coherent write); |
| * valid only if 'DPSECI_CGN_MODE_WRITE_MEM_<X>' is selected |
| */ |
| #define DPSECI_CGN_MODE_COHERENT_WRITE 0x00000004 |
| |
| /** |
| * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' CSCN message is sent to |
| * DPIO/DPCON's WQ channel once entering a congestion state |
| * (see 'threshold_entry') |
| */ |
| #define DPSECI_CGN_MODE_NOTIFY_DEST_ON_ENTER 0x00000008 |
| |
| /** |
| * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' CSCN message is sent to |
| * DPIO/DPCON's WQ channel once exiting a congestion state |
| * (see 'threshold_exit') |
| */ |
| #define DPSECI_CGN_MODE_NOTIFY_DEST_ON_EXIT 0x00000010 |
| |
| /** |
| * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' when the CSCN is written |
| * to the sw-portal's DQRR, the DQRI interrupt is asserted immediately |
| * (if enabled) |
| */ |
| #define DPSECI_CGN_MODE_INTR_COALESCING_DISABLED 0x00000020 |
| |
| /** |
| * struct dpseci_congestion_notification_cfg - congestion notification |
| * configuration |
| * @units: units type |
| * @threshold_entry: above this threshold we enter a congestion state. |
| * set it to '0' to disable it |
| * @threshold_exit: below this threshold we exit the congestion state. |
| * @message_ctx: The context that will be part of the CSCN message |
| * @message_iova: I/O virtual address (must be in DMA-able memory), |
| * must be 16B aligned; |
| * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel |
| * @notification_mode: Mask of available options; use 'DPSECI_CGN_MODE_<X>' |
| * values |
| */ |
| struct dpseci_congestion_notification_cfg { |
| enum dpseci_congestion_unit units; |
| u32 threshold_entry; |
| u32 threshold_exit; |
| u64 message_ctx; |
| u64 message_iova; |
| struct dpseci_dest_cfg dest_cfg; |
| u16 notification_mode; |
| }; |
| |
| int dpseci_set_congestion_notification(struct fsl_mc_io *mc_io, u32 cmd_flags, |
| u16 token, const struct dpseci_congestion_notification_cfg *cfg); |
| |
| int dpseci_get_congestion_notification(struct fsl_mc_io *mc_io, u32 cmd_flags, |
| u16 token, struct dpseci_congestion_notification_cfg *cfg); |
| |
| #endif /* _DPSECI_H_ */ |
