| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * GPIO driver for Fintek and Nuvoton Super-I/O chips |
| * |
| * Copyright (C) 2010-2013 LaCie |
| * |
| * Author: Simon Guinot <simon.guinot@sequanux.org> |
| */ |
| |
| #define DRVNAME "gpio-f7188x" |
| #define pr_fmt(fmt) DRVNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/bitops.h> |
| |
| /* |
| * Super-I/O registers |
| */ |
| #define SIO_LDSEL 0x07 /* Logical device select */ |
| #define SIO_DEVID 0x20 /* Device ID (2 bytes) */ |
| |
| #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ |
| #define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ |
| |
| /* |
| * Fintek devices. |
| */ |
| #define SIO_FINTEK_DEVREV 0x22 /* Fintek Device revision */ |
| #define SIO_FINTEK_MANID 0x23 /* Fintek ID (2 bytes) */ |
| |
| #define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */ |
| |
| #define SIO_F71869_ID 0x0814 /* F71869 chipset ID */ |
| #define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */ |
| #define SIO_F71882_ID 0x0541 /* F71882 chipset ID */ |
| #define SIO_F71889_ID 0x0909 /* F71889 chipset ID */ |
| #define SIO_F71889A_ID 0x1005 /* F71889A chipset ID */ |
| #define SIO_F81866_ID 0x1010 /* F81866 chipset ID */ |
| #define SIO_F81804_ID 0x1502 /* F81804 chipset ID, same for F81966 */ |
| #define SIO_F81865_ID 0x0704 /* F81865 chipset ID */ |
| |
| #define SIO_LD_GPIO_FINTEK 0x06 /* GPIO logical device */ |
| |
| /* |
| * Nuvoton devices. |
| */ |
| #define SIO_NCT6116D_ID 0xD283 /* NCT6116D chipset ID */ |
| |
| #define SIO_LD_GPIO_NUVOTON 0x07 /* GPIO logical device */ |
| |
| |
| enum chips { |
| f71869, |
| f71869a, |
| f71882fg, |
| f71889a, |
| f71889f, |
| f81866, |
| f81804, |
| f81865, |
| nct6116d, |
| }; |
| |
| static const char * const f7188x_names[] = { |
| "f71869", |
| "f71869a", |
| "f71882fg", |
| "f71889a", |
| "f71889f", |
| "f81866", |
| "f81804", |
| "f81865", |
| "nct6116d", |
| }; |
| |
| struct f7188x_sio { |
| int addr; |
| int device; |
| enum chips type; |
| }; |
| |
| struct f7188x_gpio_bank { |
| struct gpio_chip chip; |
| unsigned int regbase; |
| struct f7188x_gpio_data *data; |
| }; |
| |
| struct f7188x_gpio_data { |
| struct f7188x_sio *sio; |
| int nr_bank; |
| struct f7188x_gpio_bank *bank; |
| }; |
| |
| /* |
| * Super-I/O functions. |
| */ |
| |
| static inline int superio_inb(int base, int reg) |
| { |
| outb(reg, base); |
| return inb(base + 1); |
| } |
| |
| static int superio_inw(int base, int reg) |
| { |
| int val; |
| |
| outb(reg++, base); |
| val = inb(base + 1) << 8; |
| outb(reg, base); |
| val |= inb(base + 1); |
| |
| return val; |
| } |
| |
| static inline void superio_outb(int base, int reg, int val) |
| { |
| outb(reg, base); |
| outb(val, base + 1); |
| } |
| |
| static inline int superio_enter(int base) |
| { |
| /* Don't step on other drivers' I/O space by accident. */ |
| if (!request_muxed_region(base, 2, DRVNAME)) { |
| pr_err("I/O address 0x%04x already in use\n", base); |
| return -EBUSY; |
| } |
| |
| /* According to the datasheet the key must be send twice. */ |
| outb(SIO_UNLOCK_KEY, base); |
| outb(SIO_UNLOCK_KEY, base); |
| |
| return 0; |
| } |
| |
| static inline void superio_select(int base, int ld) |
| { |
| outb(SIO_LDSEL, base); |
| outb(ld, base + 1); |
| } |
| |
| static inline void superio_exit(int base) |
| { |
| outb(SIO_LOCK_KEY, base); |
| release_region(base, 2); |
| } |
| |
| /* |
| * GPIO chip. |
| */ |
| |
| static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset); |
| static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset); |
| static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset); |
| static int f7188x_gpio_direction_out(struct gpio_chip *chip, |
| unsigned offset, int value); |
| static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value); |
| static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset, |
| unsigned long config); |
| |
| #define F7188X_GPIO_BANK(_base, _ngpio, _regbase, _label) \ |
| { \ |
| .chip = { \ |
| .label = _label, \ |
| .owner = THIS_MODULE, \ |
| .get_direction = f7188x_gpio_get_direction, \ |
| .direction_input = f7188x_gpio_direction_in, \ |
| .get = f7188x_gpio_get, \ |
| .direction_output = f7188x_gpio_direction_out, \ |
| .set = f7188x_gpio_set, \ |
| .set_config = f7188x_gpio_set_config, \ |
| .base = _base, \ |
| .ngpio = _ngpio, \ |
| .can_sleep = true, \ |
| }, \ |
| .regbase = _regbase, \ |
| } |
| |
| #define f7188x_gpio_dir(base) ((base) + 0) |
| #define f7188x_gpio_data_out(base) ((base) + 1) |
| #define f7188x_gpio_data_in(base) ((base) + 2) |
| /* Output mode register (0:open drain 1:push-pull). */ |
| #define f7188x_gpio_out_mode(base) ((base) + 3) |
| |
| #define f7188x_gpio_dir_invert(type) ((type) == nct6116d) |
| #define f7188x_gpio_data_single(type) ((type) == nct6116d) |
| |
| static struct f7188x_gpio_bank f71869_gpio_bank[] = { |
| F7188X_GPIO_BANK(0, 6, 0xF0, DRVNAME "-0"), |
| F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), |
| F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), |
| F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), |
| F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), |
| F7188X_GPIO_BANK(50, 5, 0xA0, DRVNAME "-5"), |
| F7188X_GPIO_BANK(60, 6, 0x90, DRVNAME "-6"), |
| }; |
| |
| static struct f7188x_gpio_bank f71869a_gpio_bank[] = { |
| F7188X_GPIO_BANK(0, 6, 0xF0, DRVNAME "-0"), |
| F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), |
| F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), |
| F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), |
| F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), |
| F7188X_GPIO_BANK(50, 5, 0xA0, DRVNAME "-5"), |
| F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-6"), |
| F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-7"), |
| }; |
| |
| static struct f7188x_gpio_bank f71882_gpio_bank[] = { |
| F7188X_GPIO_BANK(0, 8, 0xF0, DRVNAME "-0"), |
| F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), |
| F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), |
| F7188X_GPIO_BANK(30, 4, 0xC0, DRVNAME "-3"), |
| F7188X_GPIO_BANK(40, 4, 0xB0, DRVNAME "-4"), |
| }; |
| |
| static struct f7188x_gpio_bank f71889a_gpio_bank[] = { |
| F7188X_GPIO_BANK(0, 7, 0xF0, DRVNAME "-0"), |
| F7188X_GPIO_BANK(10, 7, 0xE0, DRVNAME "-1"), |
| F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), |
| F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), |
| F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), |
| F7188X_GPIO_BANK(50, 5, 0xA0, DRVNAME "-5"), |
| F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-6"), |
| F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-7"), |
| }; |
| |
| static struct f7188x_gpio_bank f71889_gpio_bank[] = { |
| F7188X_GPIO_BANK(0, 7, 0xF0, DRVNAME "-0"), |
| F7188X_GPIO_BANK(10, 7, 0xE0, DRVNAME "-1"), |
| F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), |
| F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), |
| F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), |
| F7188X_GPIO_BANK(50, 5, 0xA0, DRVNAME "-5"), |
| F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-6"), |
| F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-7"), |
| }; |
| |
| static struct f7188x_gpio_bank f81866_gpio_bank[] = { |
| F7188X_GPIO_BANK(0, 8, 0xF0, DRVNAME "-0"), |
| F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), |
| F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), |
| F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), |
| F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), |
| F7188X_GPIO_BANK(50, 8, 0xA0, DRVNAME "-5"), |
| F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-6"), |
| F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-7"), |
| F7188X_GPIO_BANK(80, 8, 0x88, DRVNAME "-8"), |
| }; |
| |
| |
| static struct f7188x_gpio_bank f81804_gpio_bank[] = { |
| F7188X_GPIO_BANK(0, 8, 0xF0, DRVNAME "-0"), |
| F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), |
| F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), |
| F7188X_GPIO_BANK(50, 8, 0xA0, DRVNAME "-3"), |
| F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-4"), |
| F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-5"), |
| F7188X_GPIO_BANK(90, 8, 0x98, DRVNAME "-6"), |
| }; |
| |
| static struct f7188x_gpio_bank f81865_gpio_bank[] = { |
| F7188X_GPIO_BANK(0, 8, 0xF0, DRVNAME "-0"), |
| F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), |
| F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), |
| F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), |
| F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), |
| F7188X_GPIO_BANK(50, 8, 0xA0, DRVNAME "-5"), |
| F7188X_GPIO_BANK(60, 5, 0x90, DRVNAME "-6"), |
| }; |
| |
| static struct f7188x_gpio_bank nct6116d_gpio_bank[] = { |
| F7188X_GPIO_BANK(0, 8, 0xE0, DRVNAME "-0"), |
| F7188X_GPIO_BANK(10, 8, 0xE4, DRVNAME "-1"), |
| F7188X_GPIO_BANK(20, 8, 0xE8, DRVNAME "-2"), |
| F7188X_GPIO_BANK(30, 8, 0xEC, DRVNAME "-3"), |
| F7188X_GPIO_BANK(40, 8, 0xF0, DRVNAME "-4"), |
| F7188X_GPIO_BANK(50, 8, 0xF4, DRVNAME "-5"), |
| F7188X_GPIO_BANK(60, 8, 0xF8, DRVNAME "-6"), |
| F7188X_GPIO_BANK(70, 1, 0xFC, DRVNAME "-7"), |
| }; |
| |
| static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) |
| { |
| int err; |
| struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 dir; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return err; |
| superio_select(sio->addr, sio->device); |
| |
| dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase)); |
| |
| superio_exit(sio->addr); |
| |
| if (f7188x_gpio_dir_invert(sio->type)) |
| dir = ~dir; |
| |
| if (dir & BIT(offset)) |
| return GPIO_LINE_DIRECTION_OUT; |
| |
| return GPIO_LINE_DIRECTION_IN; |
| } |
| |
| static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) |
| { |
| int err; |
| struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 dir; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return err; |
| superio_select(sio->addr, sio->device); |
| |
| dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase)); |
| |
| if (f7188x_gpio_dir_invert(sio->type)) |
| dir |= BIT(offset); |
| else |
| dir &= ~BIT(offset); |
| superio_outb(sio->addr, f7188x_gpio_dir(bank->regbase), dir); |
| |
| superio_exit(sio->addr); |
| |
| return 0; |
| } |
| |
| static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| int err; |
| struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 dir, data; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return err; |
| superio_select(sio->addr, sio->device); |
| |
| dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase)); |
| dir = !!(dir & BIT(offset)); |
| if (f7188x_gpio_data_single(sio->type) || dir) |
| data = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase)); |
| else |
| data = superio_inb(sio->addr, f7188x_gpio_data_in(bank->regbase)); |
| |
| superio_exit(sio->addr); |
| |
| return !!(data & BIT(offset)); |
| } |
| |
| static int f7188x_gpio_direction_out(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| int err; |
| struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 dir, data_out; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return err; |
| superio_select(sio->addr, sio->device); |
| |
| data_out = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase)); |
| if (value) |
| data_out |= BIT(offset); |
| else |
| data_out &= ~BIT(offset); |
| superio_outb(sio->addr, f7188x_gpio_data_out(bank->regbase), data_out); |
| |
| dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase)); |
| if (f7188x_gpio_dir_invert(sio->type)) |
| dir &= ~BIT(offset); |
| else |
| dir |= BIT(offset); |
| superio_outb(sio->addr, f7188x_gpio_dir(bank->regbase), dir); |
| |
| superio_exit(sio->addr); |
| |
| return 0; |
| } |
| |
| static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| int err; |
| struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 data_out; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return; |
| superio_select(sio->addr, sio->device); |
| |
| data_out = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase)); |
| if (value) |
| data_out |= BIT(offset); |
| else |
| data_out &= ~BIT(offset); |
| superio_outb(sio->addr, f7188x_gpio_data_out(bank->regbase), data_out); |
| |
| superio_exit(sio->addr); |
| } |
| |
| static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset, |
| unsigned long config) |
| { |
| int err; |
| enum pin_config_param param = pinconf_to_config_param(config); |
| struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); |
| struct f7188x_sio *sio = bank->data->sio; |
| u8 data; |
| |
| if (param != PIN_CONFIG_DRIVE_OPEN_DRAIN && |
| param != PIN_CONFIG_DRIVE_PUSH_PULL) |
| return -ENOTSUPP; |
| |
| err = superio_enter(sio->addr); |
| if (err) |
| return err; |
| superio_select(sio->addr, sio->device); |
| |
| data = superio_inb(sio->addr, f7188x_gpio_out_mode(bank->regbase)); |
| if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN) |
| data &= ~BIT(offset); |
| else |
| data |= BIT(offset); |
| superio_outb(sio->addr, f7188x_gpio_out_mode(bank->regbase), data); |
| |
| superio_exit(sio->addr); |
| return 0; |
| } |
| |
| /* |
| * Platform device and driver. |
| */ |
| |
| static int f7188x_gpio_probe(struct platform_device *pdev) |
| { |
| int err; |
| int i; |
| struct f7188x_sio *sio = dev_get_platdata(&pdev->dev); |
| struct f7188x_gpio_data *data; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| switch (sio->type) { |
| case f71869: |
| data->nr_bank = ARRAY_SIZE(f71869_gpio_bank); |
| data->bank = f71869_gpio_bank; |
| break; |
| case f71869a: |
| data->nr_bank = ARRAY_SIZE(f71869a_gpio_bank); |
| data->bank = f71869a_gpio_bank; |
| break; |
| case f71882fg: |
| data->nr_bank = ARRAY_SIZE(f71882_gpio_bank); |
| data->bank = f71882_gpio_bank; |
| break; |
| case f71889a: |
| data->nr_bank = ARRAY_SIZE(f71889a_gpio_bank); |
| data->bank = f71889a_gpio_bank; |
| break; |
| case f71889f: |
| data->nr_bank = ARRAY_SIZE(f71889_gpio_bank); |
| data->bank = f71889_gpio_bank; |
| break; |
| case f81866: |
| data->nr_bank = ARRAY_SIZE(f81866_gpio_bank); |
| data->bank = f81866_gpio_bank; |
| break; |
| case f81804: |
| data->nr_bank = ARRAY_SIZE(f81804_gpio_bank); |
| data->bank = f81804_gpio_bank; |
| break; |
| case f81865: |
| data->nr_bank = ARRAY_SIZE(f81865_gpio_bank); |
| data->bank = f81865_gpio_bank; |
| break; |
| case nct6116d: |
| data->nr_bank = ARRAY_SIZE(nct6116d_gpio_bank); |
| data->bank = nct6116d_gpio_bank; |
| break; |
| default: |
| return -ENODEV; |
| } |
| data->sio = sio; |
| |
| platform_set_drvdata(pdev, data); |
| |
| /* For each GPIO bank, register a GPIO chip. */ |
| for (i = 0; i < data->nr_bank; i++) { |
| struct f7188x_gpio_bank *bank = &data->bank[i]; |
| |
| bank->chip.parent = &pdev->dev; |
| bank->data = data; |
| |
| err = devm_gpiochip_add_data(&pdev->dev, &bank->chip, bank); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Failed to register gpiochip %d: %d\n", |
| i, err); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int __init f7188x_find(int addr, struct f7188x_sio *sio) |
| { |
| int err; |
| u16 devid; |
| u16 manid; |
| |
| err = superio_enter(addr); |
| if (err) |
| return err; |
| |
| err = -ENODEV; |
| |
| sio->device = SIO_LD_GPIO_FINTEK; |
| devid = superio_inw(addr, SIO_DEVID); |
| switch (devid) { |
| case SIO_F71869_ID: |
| sio->type = f71869; |
| break; |
| case SIO_F71869A_ID: |
| sio->type = f71869a; |
| break; |
| case SIO_F71882_ID: |
| sio->type = f71882fg; |
| break; |
| case SIO_F71889A_ID: |
| sio->type = f71889a; |
| break; |
| case SIO_F71889_ID: |
| sio->type = f71889f; |
| break; |
| case SIO_F81866_ID: |
| sio->type = f81866; |
| break; |
| case SIO_F81804_ID: |
| sio->type = f81804; |
| break; |
| case SIO_F81865_ID: |
| sio->type = f81865; |
| break; |
| case SIO_NCT6116D_ID: |
| sio->device = SIO_LD_GPIO_NUVOTON; |
| sio->type = nct6116d; |
| break; |
| default: |
| pr_info("Unsupported Fintek device 0x%04x\n", devid); |
| goto err; |
| } |
| |
| /* double check manufacturer where possible */ |
| if (sio->type != nct6116d) { |
| manid = superio_inw(addr, SIO_FINTEK_MANID); |
| if (manid != SIO_FINTEK_ID) { |
| pr_debug("Not a Fintek device at 0x%08x\n", addr); |
| goto err; |
| } |
| } |
| |
| sio->addr = addr; |
| err = 0; |
| |
| pr_info("Found %s at %#x\n", f7188x_names[sio->type], (unsigned int)addr); |
| if (sio->type != nct6116d) |
| pr_info(" revision %d\n", superio_inb(addr, SIO_FINTEK_DEVREV)); |
| |
| err: |
| superio_exit(addr); |
| return err; |
| } |
| |
| static struct platform_device *f7188x_gpio_pdev; |
| |
| static int __init |
| f7188x_gpio_device_add(const struct f7188x_sio *sio) |
| { |
| int err; |
| |
| f7188x_gpio_pdev = platform_device_alloc(DRVNAME, -1); |
| if (!f7188x_gpio_pdev) |
| return -ENOMEM; |
| |
| err = platform_device_add_data(f7188x_gpio_pdev, |
| sio, sizeof(*sio)); |
| if (err) { |
| pr_err("Platform data allocation failed\n"); |
| goto err; |
| } |
| |
| err = platform_device_add(f7188x_gpio_pdev); |
| if (err) { |
| pr_err("Device addition failed\n"); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| platform_device_put(f7188x_gpio_pdev); |
| |
| return err; |
| } |
| |
| /* |
| * Try to match a supported Fintek device by reading the (hard-wired) |
| * configuration I/O ports. If available, then register both the platform |
| * device and driver to support the GPIOs. |
| */ |
| |
| static struct platform_driver f7188x_gpio_driver = { |
| .driver = { |
| .name = DRVNAME, |
| }, |
| .probe = f7188x_gpio_probe, |
| }; |
| |
| static int __init f7188x_gpio_init(void) |
| { |
| int err; |
| struct f7188x_sio sio; |
| |
| if (f7188x_find(0x2e, &sio) && |
| f7188x_find(0x4e, &sio)) |
| return -ENODEV; |
| |
| err = platform_driver_register(&f7188x_gpio_driver); |
| if (!err) { |
| err = f7188x_gpio_device_add(&sio); |
| if (err) |
| platform_driver_unregister(&f7188x_gpio_driver); |
| } |
| |
| return err; |
| } |
| subsys_initcall(f7188x_gpio_init); |
| |
| static void __exit f7188x_gpio_exit(void) |
| { |
| platform_device_unregister(f7188x_gpio_pdev); |
| platform_driver_unregister(&f7188x_gpio_driver); |
| } |
| module_exit(f7188x_gpio_exit); |
| |
| MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71869, F71869A, F71882FG, F71889A, F71889F and F81866"); |
| MODULE_AUTHOR("Simon Guinot <simon.guinot@sequanux.org>"); |
| MODULE_LICENSE("GPL"); |