blob: 51ee9482e0df90707fc6e1ad68310dc899d6011e [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* AD7766/AD7767 SPI ADC driver
*
* Copyright 2016 Analog Devices Inc.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
struct ad7766_chip_info {
unsigned int decimation_factor;
};
enum {
AD7766_SUPPLY_AVDD = 0,
AD7766_SUPPLY_DVDD = 1,
AD7766_SUPPLY_VREF = 2,
AD7766_NUM_SUPPLIES = 3
};
struct ad7766 {
const struct ad7766_chip_info *chip_info;
struct spi_device *spi;
struct clk *mclk;
struct gpio_desc *pd_gpio;
struct regulator_bulk_data reg[AD7766_NUM_SUPPLIES];
struct iio_trigger *trig;
struct spi_transfer xfer;
struct spi_message msg;
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
* Make the buffer large enough for one 24 bit sample and one 64 bit
* aligned 64 bit timestamp.
*/
unsigned char data[ALIGN(3, sizeof(s64)) + sizeof(s64)]
____cacheline_aligned;
};
/*
* AD7766 and AD7767 variations are interface compatible, the main difference is
* analog performance. Both parts will use the same ID.
*/
enum ad7766_device_ids {
ID_AD7766,
ID_AD7766_1,
ID_AD7766_2,
};
static irqreturn_t ad7766_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct ad7766 *ad7766 = iio_priv(indio_dev);
int ret;
ret = spi_sync(ad7766->spi, &ad7766->msg);
if (ret < 0)
goto done;
iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data,
pf->timestamp);
done:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static int ad7766_preenable(struct iio_dev *indio_dev)
{
struct ad7766 *ad7766 = iio_priv(indio_dev);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
if (ret < 0) {
dev_err(&ad7766->spi->dev, "Failed to enable supplies: %d\n",
ret);
return ret;
}
ret = clk_prepare_enable(ad7766->mclk);
if (ret < 0) {
dev_err(&ad7766->spi->dev, "Failed to enable MCLK: %d\n", ret);
regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
return ret;
}
gpiod_set_value(ad7766->pd_gpio, 0);
return 0;
}
static int ad7766_postdisable(struct iio_dev *indio_dev)
{
struct ad7766 *ad7766 = iio_priv(indio_dev);
gpiod_set_value(ad7766->pd_gpio, 1);
/*
* The PD pin is synchronous to the clock, so give it some time to
* notice the change before we disable the clock.
*/
msleep(20);
clk_disable_unprepare(ad7766->mclk);
regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
return 0;
}
static int ad7766_read_raw(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, int *val, int *val2, long info)
{
struct ad7766 *ad7766 = iio_priv(indio_dev);
struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer;
int scale_uv;
switch (info) {
case IIO_CHAN_INFO_SCALE:
scale_uv = regulator_get_voltage(vref);
if (scale_uv < 0)
return scale_uv;
*val = scale_uv / 1000;
*val2 = chan->scan_type.realbits;
return IIO_VAL_FRACTIONAL_LOG2;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = clk_get_rate(ad7766->mclk) /
ad7766->chip_info->decimation_factor;
return IIO_VAL_INT;
}
return -EINVAL;
}
static const struct iio_chan_spec ad7766_channels[] = {
{
.type = IIO_VOLTAGE,
.indexed = 1,
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
.scan_type = {
.sign = 's',
.realbits = 24,
.storagebits = 32,
.endianness = IIO_BE,
},
},
IIO_CHAN_SOFT_TIMESTAMP(1),
};
static const struct ad7766_chip_info ad7766_chip_info[] = {
[ID_AD7766] = {
.decimation_factor = 8,
},
[ID_AD7766_1] = {
.decimation_factor = 16,
},
[ID_AD7766_2] = {
.decimation_factor = 32,
},
};
static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = {
.preenable = &ad7766_preenable,
.postdisable = &ad7766_postdisable,
};
static const struct iio_info ad7766_info = {
.read_raw = &ad7766_read_raw,
};
static irqreturn_t ad7766_irq(int irq, void *private)
{
iio_trigger_poll(private);
return IRQ_HANDLED;
}
static int ad7766_set_trigger_state(struct iio_trigger *trig, bool enable)
{
struct ad7766 *ad7766 = iio_trigger_get_drvdata(trig);
if (enable)
enable_irq(ad7766->spi->irq);
else
disable_irq(ad7766->spi->irq);
return 0;
}
static const struct iio_trigger_ops ad7766_trigger_ops = {
.set_trigger_state = ad7766_set_trigger_state,
.validate_device = iio_trigger_validate_own_device,
};
static int ad7766_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct iio_dev *indio_dev;
struct ad7766 *ad7766;
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ad7766));
if (!indio_dev)
return -ENOMEM;
ad7766 = iio_priv(indio_dev);
ad7766->chip_info = &ad7766_chip_info[id->driver_data];
ad7766->mclk = devm_clk_get(&spi->dev, "mclk");
if (IS_ERR(ad7766->mclk))
return PTR_ERR(ad7766->mclk);
ad7766->reg[AD7766_SUPPLY_AVDD].supply = "avdd";
ad7766->reg[AD7766_SUPPLY_DVDD].supply = "dvdd";
ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref";
ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg),
ad7766->reg);
if (ret)
return ret;
ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
GPIOD_OUT_HIGH);
if (IS_ERR(ad7766->pd_gpio))
return PTR_ERR(ad7766->pd_gpio);
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ad7766_channels;
indio_dev->num_channels = ARRAY_SIZE(ad7766_channels);
indio_dev->info = &ad7766_info;
if (spi->irq > 0) {
ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
indio_dev->name,
iio_device_id(indio_dev));
if (!ad7766->trig)
return -ENOMEM;
ad7766->trig->ops = &ad7766_trigger_ops;
iio_trigger_set_drvdata(ad7766->trig, ad7766);
/*
* The device generates interrupts as long as it is powered up.
* Some platforms might not allow the option to power it down so
* don't enable the interrupt to avoid extra load on the system
*/
ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq,
IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN,
dev_name(&spi->dev),
ad7766->trig);
if (ret < 0)
return ret;
ret = devm_iio_trigger_register(&spi->dev, ad7766->trig);
if (ret)
return ret;
}
ad7766->spi = spi;
/* First byte always 0 */
ad7766->xfer.rx_buf = &ad7766->data[1];
ad7766->xfer.len = 3;
spi_message_init(&ad7766->msg);
spi_message_add_tail(&ad7766->xfer, &ad7766->msg);
ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
&iio_pollfunc_store_time, &ad7766_trigger_handler,
&ad7766_buffer_setup_ops);
if (ret)
return ret;
return devm_iio_device_register(&spi->dev, indio_dev);
}
static const struct spi_device_id ad7766_id[] = {
{"ad7766", ID_AD7766},
{"ad7766-1", ID_AD7766_1},
{"ad7766-2", ID_AD7766_2},
{"ad7767", ID_AD7766},
{"ad7767-1", ID_AD7766_1},
{"ad7767-2", ID_AD7766_2},
{}
};
MODULE_DEVICE_TABLE(spi, ad7766_id);
static struct spi_driver ad7766_driver = {
.driver = {
.name = "ad7766",
},
.probe = ad7766_probe,
.id_table = ad7766_id,
};
module_spi_driver(ad7766_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("Analog Devices AD7766 and AD7767 ADCs driver support");
MODULE_LICENSE("GPL v2");