|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  |  | 
|  | #include "linux/virtio_pci.h" | 
|  | #include <linux/virtio_pci_legacy.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  |  | 
|  |  | 
|  | /* | 
|  | * vp_legacy_probe: probe the legacy virtio pci device, note that the | 
|  | * caller is required to enable PCI device before calling this function. | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * | 
|  | * Return 0 on succeed otherwise fail | 
|  | */ | 
|  | int vp_legacy_probe(struct virtio_pci_legacy_device *ldev) | 
|  | { | 
|  | struct pci_dev *pci_dev = ldev->pci_dev; | 
|  | int rc; | 
|  |  | 
|  | /* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */ | 
|  | if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (pci_dev->revision != VIRTIO_PCI_ABI_VERSION) | 
|  | return -ENODEV; | 
|  |  | 
|  | rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64)); | 
|  | if (rc) { | 
|  | rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32)); | 
|  | } else { | 
|  | /* | 
|  | * The virtio ring base address is expressed as a 32-bit PFN, | 
|  | * with a page size of 1 << VIRTIO_PCI_QUEUE_ADDR_SHIFT. | 
|  | */ | 
|  | dma_set_coherent_mask(&pci_dev->dev, | 
|  | DMA_BIT_MASK(32 + VIRTIO_PCI_QUEUE_ADDR_SHIFT)); | 
|  | } | 
|  |  | 
|  | if (rc) | 
|  | dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA.  Trying to continue, but this might not work.\n"); | 
|  |  | 
|  | rc = pci_request_region(pci_dev, 0, "virtio-pci-legacy"); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | ldev->ioaddr = pci_iomap(pci_dev, 0, 0); | 
|  | if (!ldev->ioaddr) { | 
|  | rc = -EIO; | 
|  | goto err_iomap; | 
|  | } | 
|  |  | 
|  | ldev->isr = ldev->ioaddr + VIRTIO_PCI_ISR; | 
|  |  | 
|  | ldev->id.vendor = pci_dev->subsystem_vendor; | 
|  | ldev->id.device = pci_dev->subsystem_device; | 
|  |  | 
|  | return 0; | 
|  | err_iomap: | 
|  | pci_release_region(pci_dev, 0); | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_probe); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_probe: remove and cleanup the legacy virtio pci device | 
|  | * @ldev: the legacy virtio-pci device | 
|  | */ | 
|  | void vp_legacy_remove(struct virtio_pci_legacy_device *ldev) | 
|  | { | 
|  | struct pci_dev *pci_dev = ldev->pci_dev; | 
|  |  | 
|  | pci_iounmap(pci_dev, ldev->ioaddr); | 
|  | pci_release_region(pci_dev, 0); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_remove); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_get_features - get features from device | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * | 
|  | * Returns the features read from the device | 
|  | */ | 
|  | u64 vp_legacy_get_features(struct virtio_pci_legacy_device *ldev) | 
|  | { | 
|  |  | 
|  | return ioread32(ldev->ioaddr + VIRTIO_PCI_HOST_FEATURES); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_get_features); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_get_driver_features - get driver features from device | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * | 
|  | * Returns the driver features read from the device | 
|  | */ | 
|  | u64 vp_legacy_get_driver_features(struct virtio_pci_legacy_device *ldev) | 
|  | { | 
|  | return ioread32(ldev->ioaddr + VIRTIO_PCI_GUEST_FEATURES); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_get_driver_features); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_set_features - set features to device | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * @features: the features set to device | 
|  | */ | 
|  | void vp_legacy_set_features(struct virtio_pci_legacy_device *ldev, | 
|  | u32 features) | 
|  | { | 
|  | iowrite32(features, ldev->ioaddr + VIRTIO_PCI_GUEST_FEATURES); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_set_features); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_get_status - get the device status | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * | 
|  | * Returns the status read from device | 
|  | */ | 
|  | u8 vp_legacy_get_status(struct virtio_pci_legacy_device *ldev) | 
|  | { | 
|  | return ioread8(ldev->ioaddr + VIRTIO_PCI_STATUS); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_get_status); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_set_status - set status to device | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * @status: the status set to device | 
|  | */ | 
|  | void vp_legacy_set_status(struct virtio_pci_legacy_device *ldev, | 
|  | u8 status) | 
|  | { | 
|  | iowrite8(status, ldev->ioaddr + VIRTIO_PCI_STATUS); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_set_status); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_queue_vector - set the MSIX vector for a specific virtqueue | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * @index: queue index | 
|  | * @vector: the config vector | 
|  | * | 
|  | * Returns the config vector read from the device | 
|  | */ | 
|  | u16 vp_legacy_queue_vector(struct virtio_pci_legacy_device *ldev, | 
|  | u16 index, u16 vector) | 
|  | { | 
|  | iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); | 
|  | iowrite16(vector, ldev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); | 
|  | /* Flush the write out to device */ | 
|  | return ioread16(ldev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_queue_vector); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_config_vector - set the vector for config interrupt | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * @vector: the config vector | 
|  | * | 
|  | * Returns the config vector read from the device | 
|  | */ | 
|  | u16 vp_legacy_config_vector(struct virtio_pci_legacy_device *ldev, | 
|  | u16 vector) | 
|  | { | 
|  | /* Setup the vector used for configuration events */ | 
|  | iowrite16(vector, ldev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); | 
|  | /* Verify we had enough resources to assign the vector */ | 
|  | /* Will also flush the write out to device */ | 
|  | return ioread16(ldev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_config_vector); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_set_queue_address - set the virtqueue address | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * @index: the queue index | 
|  | * @queue_pfn: pfn of the virtqueue | 
|  | */ | 
|  | void vp_legacy_set_queue_address(struct virtio_pci_legacy_device *ldev, | 
|  | u16 index, u32 queue_pfn) | 
|  | { | 
|  | iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); | 
|  | iowrite32(queue_pfn, ldev->ioaddr + VIRTIO_PCI_QUEUE_PFN); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_set_queue_address); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_get_queue_enable - enable a virtqueue | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * @index: the queue index | 
|  | * | 
|  | * Returns whether a virtqueue is enabled or not | 
|  | */ | 
|  | bool vp_legacy_get_queue_enable(struct virtio_pci_legacy_device *ldev, | 
|  | u16 index) | 
|  | { | 
|  | iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); | 
|  | return ioread32(ldev->ioaddr + VIRTIO_PCI_QUEUE_PFN); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_get_queue_enable); | 
|  |  | 
|  | /* | 
|  | * vp_legacy_get_queue_size - get size for a virtqueue | 
|  | * @ldev: the legacy virtio-pci device | 
|  | * @index: the queue index | 
|  | * | 
|  | * Returns the size of the virtqueue | 
|  | */ | 
|  | u16 vp_legacy_get_queue_size(struct virtio_pci_legacy_device *ldev, | 
|  | u16 index) | 
|  | { | 
|  | iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); | 
|  | return ioread16(ldev->ioaddr + VIRTIO_PCI_QUEUE_NUM); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vp_legacy_get_queue_size); | 
|  |  | 
|  | MODULE_VERSION("0.1"); | 
|  | MODULE_DESCRIPTION("Legacy Virtio PCI Device"); | 
|  | MODULE_AUTHOR("Wu Zongyong <wuzongyong@linux.alibaba.com>"); | 
|  | MODULE_LICENSE("GPL"); |