|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Copyright 2019 NXP | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/devfreq.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/pm_opp.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | struct imx_bus { | 
|  | struct devfreq_dev_profile profile; | 
|  | struct devfreq *devfreq; | 
|  | struct clk *clk; | 
|  | struct platform_device *icc_pdev; | 
|  | }; | 
|  |  | 
|  | static int imx_bus_target(struct device *dev, | 
|  | unsigned long *freq, u32 flags) | 
|  | { | 
|  | struct dev_pm_opp *new_opp; | 
|  | int ret; | 
|  |  | 
|  | new_opp = devfreq_recommended_opp(dev, freq, flags); | 
|  | if (IS_ERR(new_opp)) { | 
|  | ret = PTR_ERR(new_opp); | 
|  | dev_err(dev, "failed to get recommended opp: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | dev_pm_opp_put(new_opp); | 
|  |  | 
|  | return dev_pm_opp_set_rate(dev, *freq); | 
|  | } | 
|  |  | 
|  | static int imx_bus_get_cur_freq(struct device *dev, unsigned long *freq) | 
|  | { | 
|  | struct imx_bus *priv = dev_get_drvdata(dev); | 
|  |  | 
|  | *freq = clk_get_rate(priv->clk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void imx_bus_exit(struct device *dev) | 
|  | { | 
|  | struct imx_bus *priv = dev_get_drvdata(dev); | 
|  |  | 
|  | dev_pm_opp_of_remove_table(dev); | 
|  | platform_device_unregister(priv->icc_pdev); | 
|  | } | 
|  |  | 
|  | /* imx_bus_init_icc() - register matching icc provider if required */ | 
|  | static int imx_bus_init_icc(struct device *dev) | 
|  | { | 
|  | struct imx_bus *priv = dev_get_drvdata(dev); | 
|  | const char *icc_driver_name; | 
|  |  | 
|  | if (!of_get_property(dev->of_node, "#interconnect-cells", NULL)) | 
|  | return 0; | 
|  | if (!IS_ENABLED(CONFIG_INTERCONNECT_IMX)) { | 
|  | dev_warn(dev, "imx interconnect drivers disabled\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | icc_driver_name = of_device_get_match_data(dev); | 
|  | if (!icc_driver_name) { | 
|  | dev_err(dev, "unknown interconnect driver\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | priv->icc_pdev = platform_device_register_data( | 
|  | dev, icc_driver_name, -1, NULL, 0); | 
|  | if (IS_ERR(priv->icc_pdev)) { | 
|  | dev_err(dev, "failed to register icc provider %s: %ld\n", | 
|  | icc_driver_name, PTR_ERR(priv->icc_pdev)); | 
|  | return PTR_ERR(priv->icc_pdev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int imx_bus_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct imx_bus *priv; | 
|  | const char *gov = DEVFREQ_GOV_USERSPACE; | 
|  | int ret; | 
|  |  | 
|  | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* | 
|  | * Fetch the clock to adjust but don't explicitly enable. | 
|  | * | 
|  | * For imx bus clock clk_set_rate is safe no matter if the clock is on | 
|  | * or off and some peripheral side-buses might be off unless enabled by | 
|  | * drivers for devices on those specific buses. | 
|  | * | 
|  | * Rate adjustment on a disabled bus clock just takes effect later. | 
|  | */ | 
|  | priv->clk = devm_clk_get(dev, NULL); | 
|  | if (IS_ERR(priv->clk)) { | 
|  | ret = PTR_ERR(priv->clk); | 
|  | dev_err(dev, "failed to fetch clk: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  | platform_set_drvdata(pdev, priv); | 
|  |  | 
|  | ret = dev_pm_opp_of_add_table(dev); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "failed to get OPP table\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | priv->profile.target = imx_bus_target; | 
|  | priv->profile.exit = imx_bus_exit; | 
|  | priv->profile.get_cur_freq = imx_bus_get_cur_freq; | 
|  | priv->profile.initial_freq = clk_get_rate(priv->clk); | 
|  |  | 
|  | priv->devfreq = devm_devfreq_add_device(dev, &priv->profile, | 
|  | gov, NULL); | 
|  | if (IS_ERR(priv->devfreq)) { | 
|  | ret = PTR_ERR(priv->devfreq); | 
|  | dev_err(dev, "failed to add devfreq device: %d\n", ret); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | ret = imx_bus_init_icc(dev); | 
|  | if (ret) | 
|  | goto err; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | dev_pm_opp_of_remove_table(dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id imx_bus_of_match[] = { | 
|  | { .compatible = "fsl,imx8mq-noc", .data = "imx8mq-interconnect", }, | 
|  | { .compatible = "fsl,imx8mm-noc", .data = "imx8mm-interconnect", }, | 
|  | { .compatible = "fsl,imx8mn-noc", .data = "imx8mn-interconnect", }, | 
|  | { .compatible = "fsl,imx8mp-noc", .data = "imx8mp-interconnect", }, | 
|  | { .compatible = "fsl,imx8m-noc", }, | 
|  | { .compatible = "fsl,imx8m-nic", }, | 
|  | { /* sentinel */ }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, imx_bus_of_match); | 
|  |  | 
|  | static struct platform_driver imx_bus_platdrv = { | 
|  | .probe		= imx_bus_probe, | 
|  | .driver = { | 
|  | .name	= "imx-bus-devfreq", | 
|  | .of_match_table = imx_bus_of_match, | 
|  | }, | 
|  | }; | 
|  | module_platform_driver(imx_bus_platdrv); | 
|  |  | 
|  | MODULE_DESCRIPTION("Generic i.MX bus frequency scaling driver"); | 
|  | MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>"); | 
|  | MODULE_LICENSE("GPL v2"); |