| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2003-2005 Devicescape Software, Inc. |
| * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz> |
| * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2013-2014 Intel Mobile Communications GmbH |
| * Copyright(c) 2016 Intel Deutschland GmbH |
| * Copyright (C) 2018 - 2022 Intel Corporation |
| */ |
| |
| #include <linux/debugfs.h> |
| #include <linux/ieee80211.h> |
| #include "ieee80211_i.h" |
| #include "debugfs.h" |
| #include "debugfs_sta.h" |
| #include "sta_info.h" |
| #include "driver-ops.h" |
| |
| /* sta attributtes */ |
| |
| #define STA_READ(name, field, format_string) \ |
| static ssize_t sta_ ##name## _read(struct file *file, \ |
| char __user *userbuf, \ |
| size_t count, loff_t *ppos) \ |
| { \ |
| struct sta_info *sta = file->private_data; \ |
| return mac80211_format_buffer(userbuf, count, ppos, \ |
| format_string, sta->field); \ |
| } |
| #define STA_READ_D(name, field) STA_READ(name, field, "%d\n") |
| |
| #define STA_OPS(name) \ |
| static const struct file_operations sta_ ##name## _ops = { \ |
| .read = sta_##name##_read, \ |
| .open = simple_open, \ |
| .llseek = generic_file_llseek, \ |
| } |
| |
| #define STA_OPS_RW(name) \ |
| static const struct file_operations sta_ ##name## _ops = { \ |
| .read = sta_##name##_read, \ |
| .write = sta_##name##_write, \ |
| .open = simple_open, \ |
| .llseek = generic_file_llseek, \ |
| } |
| |
| #define STA_FILE(name, field, format) \ |
| STA_READ_##format(name, field) \ |
| STA_OPS(name) |
| |
| STA_FILE(aid, sta.aid, D); |
| |
| static const char * const sta_flag_names[] = { |
| #define FLAG(F) [WLAN_STA_##F] = #F |
| FLAG(AUTH), |
| FLAG(ASSOC), |
| FLAG(PS_STA), |
| FLAG(AUTHORIZED), |
| FLAG(SHORT_PREAMBLE), |
| FLAG(WDS), |
| FLAG(CLEAR_PS_FILT), |
| FLAG(MFP), |
| FLAG(BLOCK_BA), |
| FLAG(PS_DRIVER), |
| FLAG(PSPOLL), |
| FLAG(TDLS_PEER), |
| FLAG(TDLS_PEER_AUTH), |
| FLAG(TDLS_INITIATOR), |
| FLAG(TDLS_CHAN_SWITCH), |
| FLAG(TDLS_OFF_CHANNEL), |
| FLAG(TDLS_WIDER_BW), |
| FLAG(UAPSD), |
| FLAG(SP), |
| FLAG(4ADDR_EVENT), |
| FLAG(INSERTED), |
| FLAG(RATE_CONTROL), |
| FLAG(TOFFSET_KNOWN), |
| FLAG(MPSP_OWNER), |
| FLAG(MPSP_RECIPIENT), |
| FLAG(PS_DELIVER), |
| FLAG(USES_ENCRYPTION), |
| FLAG(DECAP_OFFLOAD), |
| #undef FLAG |
| }; |
| |
| static ssize_t sta_flags_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[16 * NUM_WLAN_STA_FLAGS], *pos = buf; |
| char *end = buf + sizeof(buf) - 1; |
| struct sta_info *sta = file->private_data; |
| unsigned int flg; |
| |
| BUILD_BUG_ON(ARRAY_SIZE(sta_flag_names) != NUM_WLAN_STA_FLAGS); |
| |
| for (flg = 0; flg < NUM_WLAN_STA_FLAGS; flg++) { |
| if (test_sta_flag(sta, flg)) |
| pos += scnprintf(pos, end - pos, "%s\n", |
| sta_flag_names[flg]); |
| } |
| |
| return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); |
| } |
| STA_OPS(flags); |
| |
| static ssize_t sta_num_ps_buf_frames_read(struct file *file, |
| char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| struct sta_info *sta = file->private_data; |
| char buf[17*IEEE80211_NUM_ACS], *p = buf; |
| int ac; |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) |
| p += scnprintf(p, sizeof(buf)+buf-p, "AC%d: %d\n", ac, |
| skb_queue_len(&sta->ps_tx_buf[ac]) + |
| skb_queue_len(&sta->tx_filtered[ac])); |
| return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| } |
| STA_OPS(num_ps_buf_frames); |
| |
| static ssize_t sta_last_seq_ctrl_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[15*IEEE80211_NUM_TIDS], *p = buf; |
| int i; |
| struct sta_info *sta = file->private_data; |
| for (i = 0; i < IEEE80211_NUM_TIDS; i++) |
| p += scnprintf(p, sizeof(buf)+buf-p, "%x ", |
| le16_to_cpu(sta->last_seq_ctrl[i])); |
| p += scnprintf(p, sizeof(buf)+buf-p, "\n"); |
| return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| } |
| STA_OPS(last_seq_ctrl); |
| |
| #define AQM_TXQ_ENTRY_LEN 130 |
| |
| static ssize_t sta_aqm_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| struct sta_info *sta = file->private_data; |
| struct ieee80211_local *local = sta->local; |
| size_t bufsz = AQM_TXQ_ENTRY_LEN * (IEEE80211_NUM_TIDS + 2); |
| char *buf = kzalloc(bufsz, GFP_KERNEL), *p = buf; |
| struct txq_info *txqi; |
| ssize_t rv; |
| int i; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| spin_lock_bh(&local->fq.lock); |
| rcu_read_lock(); |
| |
| p += scnprintf(p, |
| bufsz + buf - p, |
| "target %uus interval %uus ecn %s\n", |
| codel_time_to_us(sta->cparams.target), |
| codel_time_to_us(sta->cparams.interval), |
| sta->cparams.ecn ? "yes" : "no"); |
| p += scnprintf(p, |
| bufsz + buf - p, |
| "tid ac backlog-bytes backlog-packets new-flows drops marks overlimit collisions tx-bytes tx-packets flags\n"); |
| |
| for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) { |
| if (!sta->sta.txq[i]) |
| continue; |
| txqi = to_txq_info(sta->sta.txq[i]); |
| p += scnprintf(p, bufsz + buf - p, |
| "%d %d %u %u %u %u %u %u %u %u %u 0x%lx(%s%s%s%s)\n", |
| txqi->txq.tid, |
| txqi->txq.ac, |
| txqi->tin.backlog_bytes, |
| txqi->tin.backlog_packets, |
| txqi->tin.flows, |
| txqi->cstats.drop_count, |
| txqi->cstats.ecn_mark, |
| txqi->tin.overlimit, |
| txqi->tin.collisions, |
| txqi->tin.tx_bytes, |
| txqi->tin.tx_packets, |
| txqi->flags, |
| test_bit(IEEE80211_TXQ_STOP, &txqi->flags) ? "STOP" : "RUN", |
| test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags) ? " AMPDU" : "", |
| test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags) ? " NO-AMSDU" : "", |
| test_bit(IEEE80211_TXQ_DIRTY, &txqi->flags) ? " DIRTY" : ""); |
| } |
| |
| rcu_read_unlock(); |
| spin_unlock_bh(&local->fq.lock); |
| |
| rv = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| kfree(buf); |
| return rv; |
| } |
| STA_OPS(aqm); |
| |
| static ssize_t sta_airtime_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| struct sta_info *sta = file->private_data; |
| struct ieee80211_local *local = sta->sdata->local; |
| size_t bufsz = 400; |
| char *buf = kzalloc(bufsz, GFP_KERNEL), *p = buf; |
| u64 rx_airtime = 0, tx_airtime = 0; |
| s32 deficit[IEEE80211_NUM_ACS]; |
| ssize_t rv; |
| int ac; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| spin_lock_bh(&local->active_txq_lock[ac]); |
| rx_airtime += sta->airtime[ac].rx_airtime; |
| tx_airtime += sta->airtime[ac].tx_airtime; |
| deficit[ac] = sta->airtime[ac].deficit; |
| spin_unlock_bh(&local->active_txq_lock[ac]); |
| } |
| |
| p += scnprintf(p, bufsz + buf - p, |
| "RX: %llu us\nTX: %llu us\nWeight: %u\n" |
| "Deficit: VO: %d us VI: %d us BE: %d us BK: %d us\n", |
| rx_airtime, tx_airtime, sta->airtime_weight, |
| deficit[0], deficit[1], deficit[2], deficit[3]); |
| |
| rv = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| kfree(buf); |
| return rv; |
| } |
| |
| static ssize_t sta_airtime_write(struct file *file, const char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| struct sta_info *sta = file->private_data; |
| struct ieee80211_local *local = sta->sdata->local; |
| int ac; |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| spin_lock_bh(&local->active_txq_lock[ac]); |
| sta->airtime[ac].rx_airtime = 0; |
| sta->airtime[ac].tx_airtime = 0; |
| sta->airtime[ac].deficit = sta->airtime_weight; |
| spin_unlock_bh(&local->active_txq_lock[ac]); |
| } |
| |
| return count; |
| } |
| STA_OPS_RW(airtime); |
| |
| static ssize_t sta_aql_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| struct sta_info *sta = file->private_data; |
| struct ieee80211_local *local = sta->sdata->local; |
| size_t bufsz = 400; |
| char *buf = kzalloc(bufsz, GFP_KERNEL), *p = buf; |
| u32 q_depth[IEEE80211_NUM_ACS]; |
| u32 q_limit_l[IEEE80211_NUM_ACS], q_limit_h[IEEE80211_NUM_ACS]; |
| ssize_t rv; |
| int ac; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| spin_lock_bh(&local->active_txq_lock[ac]); |
| q_limit_l[ac] = sta->airtime[ac].aql_limit_low; |
| q_limit_h[ac] = sta->airtime[ac].aql_limit_high; |
| spin_unlock_bh(&local->active_txq_lock[ac]); |
| q_depth[ac] = atomic_read(&sta->airtime[ac].aql_tx_pending); |
| } |
| |
| p += scnprintf(p, bufsz + buf - p, |
| "Q depth: VO: %u us VI: %u us BE: %u us BK: %u us\n" |
| "Q limit[low/high]: VO: %u/%u VI: %u/%u BE: %u/%u BK: %u/%u\n", |
| q_depth[0], q_depth[1], q_depth[2], q_depth[3], |
| q_limit_l[0], q_limit_h[0], q_limit_l[1], q_limit_h[1], |
| q_limit_l[2], q_limit_h[2], q_limit_l[3], q_limit_h[3]); |
| |
| rv = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| kfree(buf); |
| return rv; |
| } |
| |
| static ssize_t sta_aql_write(struct file *file, const char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| struct sta_info *sta = file->private_data; |
| u32 ac, q_limit_l, q_limit_h; |
| char _buf[100] = {}, *buf = _buf; |
| |
| if (count > sizeof(_buf)) |
| return -EINVAL; |
| |
| if (copy_from_user(buf, userbuf, count)) |
| return -EFAULT; |
| |
| buf[sizeof(_buf) - 1] = '\0'; |
| if (sscanf(buf, "limit %u %u %u", &ac, &q_limit_l, &q_limit_h) |
| != 3) |
| return -EINVAL; |
| |
| if (ac >= IEEE80211_NUM_ACS) |
| return -EINVAL; |
| |
| sta->airtime[ac].aql_limit_low = q_limit_l; |
| sta->airtime[ac].aql_limit_high = q_limit_h; |
| |
| return count; |
| } |
| STA_OPS_RW(aql); |
| |
| |
| static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf, *p; |
| ssize_t bufsz = 71 + IEEE80211_NUM_TIDS * 40; |
| int i; |
| struct sta_info *sta = file->private_data; |
| struct tid_ampdu_rx *tid_rx; |
| struct tid_ampdu_tx *tid_tx; |
| ssize_t ret; |
| |
| buf = kzalloc(bufsz, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| p = buf; |
| |
| rcu_read_lock(); |
| |
| p += scnprintf(p, bufsz + buf - p, "next dialog_token: %#02x\n", |
| sta->ampdu_mlme.dialog_token_allocator + 1); |
| p += scnprintf(p, bufsz + buf - p, |
| "TID\t\tRX\tDTKN\tSSN\t\tTX\tDTKN\tpending\n"); |
| |
| for (i = 0; i < IEEE80211_NUM_TIDS; i++) { |
| bool tid_rx_valid; |
| |
| tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[i]); |
| tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[i]); |
| tid_rx_valid = test_bit(i, sta->ampdu_mlme.agg_session_valid); |
| |
| p += scnprintf(p, bufsz + buf - p, "%02d", i); |
| p += scnprintf(p, bufsz + buf - p, "\t\t%x", |
| tid_rx_valid); |
| p += scnprintf(p, bufsz + buf - p, "\t%#.2x", |
| tid_rx_valid ? |
| sta->ampdu_mlme.tid_rx_token[i] : 0); |
| p += scnprintf(p, bufsz + buf - p, "\t%#.3x", |
| tid_rx ? tid_rx->ssn : 0); |
| |
| p += scnprintf(p, bufsz + buf - p, "\t\t%x", !!tid_tx); |
| p += scnprintf(p, bufsz + buf - p, "\t%#.2x", |
| tid_tx ? tid_tx->dialog_token : 0); |
| p += scnprintf(p, bufsz + buf - p, "\t%03d", |
| tid_tx ? skb_queue_len(&tid_tx->pending) : 0); |
| p += scnprintf(p, bufsz + buf - p, "\n"); |
| } |
| rcu_read_unlock(); |
| |
| ret = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| kfree(buf); |
| return ret; |
| } |
| |
| static ssize_t sta_agg_status_write(struct file *file, const char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| char _buf[25] = {}, *buf = _buf; |
| struct sta_info *sta = file->private_data; |
| bool start, tx; |
| unsigned long tid; |
| char *pos; |
| int ret, timeout = 5000; |
| |
| if (count > sizeof(_buf)) |
| return -EINVAL; |
| |
| if (copy_from_user(buf, userbuf, count)) |
| return -EFAULT; |
| |
| buf[sizeof(_buf) - 1] = '\0'; |
| pos = buf; |
| buf = strsep(&pos, " "); |
| if (!buf) |
| return -EINVAL; |
| |
| if (!strcmp(buf, "tx")) |
| tx = true; |
| else if (!strcmp(buf, "rx")) |
| tx = false; |
| else |
| return -EINVAL; |
| |
| buf = strsep(&pos, " "); |
| if (!buf) |
| return -EINVAL; |
| if (!strcmp(buf, "start")) { |
| start = true; |
| if (!tx) |
| return -EINVAL; |
| } else if (!strcmp(buf, "stop")) { |
| start = false; |
| } else { |
| return -EINVAL; |
| } |
| |
| buf = strsep(&pos, " "); |
| if (!buf) |
| return -EINVAL; |
| if (sscanf(buf, "timeout=%d", &timeout) == 1) { |
| buf = strsep(&pos, " "); |
| if (!buf || !tx || !start) |
| return -EINVAL; |
| } |
| |
| ret = kstrtoul(buf, 0, &tid); |
| if (ret || tid >= IEEE80211_NUM_TIDS) |
| return -EINVAL; |
| |
| if (tx) { |
| if (start) |
| ret = ieee80211_start_tx_ba_session(&sta->sta, tid, |
| timeout); |
| else |
| ret = ieee80211_stop_tx_ba_session(&sta->sta, tid); |
| } else { |
| __ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_RECIPIENT, |
| 3, true); |
| ret = 0; |
| } |
| |
| return ret ?: count; |
| } |
| STA_OPS_RW(agg_status); |
| |
| /* link sta attributes */ |
| #define LINK_STA_OPS(name) \ |
| static const struct file_operations link_sta_ ##name## _ops = { \ |
| .read = link_sta_##name##_read, \ |
| .open = simple_open, \ |
| .llseek = generic_file_llseek, \ |
| } |
| |
| static ssize_t link_sta_addr_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| struct link_sta_info *link_sta = file->private_data; |
| u8 mac[3 * ETH_ALEN + 1]; |
| |
| snprintf(mac, sizeof(mac), "%pM\n", link_sta->pub->addr); |
| |
| return simple_read_from_buffer(userbuf, count, ppos, mac, 3 * ETH_ALEN); |
| } |
| |
| LINK_STA_OPS(addr); |
| |
| static ssize_t link_sta_ht_capa_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| #define PRINT_HT_CAP(_cond, _str) \ |
| do { \ |
| if (_cond) \ |
| p += scnprintf(p, bufsz + buf - p, "\t" _str "\n"); \ |
| } while (0) |
| char *buf, *p; |
| int i; |
| ssize_t bufsz = 512; |
| struct link_sta_info *link_sta = file->private_data; |
| struct ieee80211_sta_ht_cap *htc = &link_sta->pub->ht_cap; |
| ssize_t ret; |
| |
| buf = kzalloc(bufsz, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| p = buf; |
| |
| p += scnprintf(p, bufsz + buf - p, "ht %ssupported\n", |
| htc->ht_supported ? "" : "not "); |
| if (htc->ht_supported) { |
| p += scnprintf(p, bufsz + buf - p, "cap: %#.4x\n", htc->cap); |
| |
| PRINT_HT_CAP((htc->cap & BIT(0)), "RX LDPC"); |
| PRINT_HT_CAP((htc->cap & BIT(1)), "HT20/HT40"); |
| PRINT_HT_CAP(!(htc->cap & BIT(1)), "HT20"); |
| |
| PRINT_HT_CAP(((htc->cap >> 2) & 0x3) == 0, "Static SM Power Save"); |
| PRINT_HT_CAP(((htc->cap >> 2) & 0x3) == 1, "Dynamic SM Power Save"); |
| PRINT_HT_CAP(((htc->cap >> 2) & 0x3) == 3, "SM Power Save disabled"); |
| |
| PRINT_HT_CAP((htc->cap & BIT(4)), "RX Greenfield"); |
| PRINT_HT_CAP((htc->cap & BIT(5)), "RX HT20 SGI"); |
| PRINT_HT_CAP((htc->cap & BIT(6)), "RX HT40 SGI"); |
| PRINT_HT_CAP((htc->cap & BIT(7)), "TX STBC"); |
| |
| PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 0, "No RX STBC"); |
| PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 1, "RX STBC 1-stream"); |
| PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 2, "RX STBC 2-streams"); |
| PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 3, "RX STBC 3-streams"); |
| |
| PRINT_HT_CAP((htc->cap & BIT(10)), "HT Delayed Block Ack"); |
| |
| PRINT_HT_CAP(!(htc->cap & BIT(11)), "Max AMSDU length: " |
| "3839 bytes"); |
| PRINT_HT_CAP((htc->cap & BIT(11)), "Max AMSDU length: " |
| "7935 bytes"); |
| |
| /* |
| * For beacons and probe response this would mean the BSS |
| * does or does not allow the usage of DSSS/CCK HT40. |
| * Otherwise it means the STA does or does not use |
| * DSSS/CCK HT40. |
| */ |
| PRINT_HT_CAP((htc->cap & BIT(12)), "DSSS/CCK HT40"); |
| PRINT_HT_CAP(!(htc->cap & BIT(12)), "No DSSS/CCK HT40"); |
| |
| /* BIT(13) is reserved */ |
| |
| PRINT_HT_CAP((htc->cap & BIT(14)), "40 MHz Intolerant"); |
| |
| PRINT_HT_CAP((htc->cap & BIT(15)), "L-SIG TXOP protection"); |
| |
| p += scnprintf(p, bufsz + buf - p, "ampdu factor/density: %d/%d\n", |
| htc->ampdu_factor, htc->ampdu_density); |
| p += scnprintf(p, bufsz + buf - p, "MCS mask:"); |
| |
| for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) |
| p += scnprintf(p, bufsz + buf - p, " %.2x", |
| htc->mcs.rx_mask[i]); |
| p += scnprintf(p, bufsz + buf - p, "\n"); |
| |
| /* If not set this is meaningless */ |
| if (le16_to_cpu(htc->mcs.rx_highest)) { |
| p += scnprintf(p, bufsz + buf - p, |
| "MCS rx highest: %d Mbps\n", |
| le16_to_cpu(htc->mcs.rx_highest)); |
| } |
| |
| p += scnprintf(p, bufsz + buf - p, "MCS tx params: %x\n", |
| htc->mcs.tx_params); |
| } |
| |
| ret = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| kfree(buf); |
| return ret; |
| } |
| LINK_STA_OPS(ht_capa); |
| |
| static ssize_t link_sta_vht_capa_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf, *p; |
| struct link_sta_info *link_sta = file->private_data; |
| struct ieee80211_sta_vht_cap *vhtc = &link_sta->pub->vht_cap; |
| ssize_t ret; |
| ssize_t bufsz = 512; |
| |
| buf = kzalloc(bufsz, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| p = buf; |
| |
| p += scnprintf(p, bufsz + buf - p, "VHT %ssupported\n", |
| vhtc->vht_supported ? "" : "not "); |
| if (vhtc->vht_supported) { |
| p += scnprintf(p, bufsz + buf - p, "cap: %#.8x\n", |
| vhtc->cap); |
| #define PFLAG(a, b) \ |
| do { \ |
| if (vhtc->cap & IEEE80211_VHT_CAP_ ## a) \ |
| p += scnprintf(p, bufsz + buf - p, \ |
| "\t\t%s\n", b); \ |
| } while (0) |
| |
| switch (vhtc->cap & 0x3) { |
| case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895: |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tMAX-MPDU-3895\n"); |
| break; |
| case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991: |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tMAX-MPDU-7991\n"); |
| break; |
| case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454: |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tMAX-MPDU-11454\n"); |
| break; |
| default: |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tMAX-MPDU-UNKNOWN\n"); |
| } |
| switch (vhtc->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { |
| case 0: |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\t80Mhz\n"); |
| break; |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\t160Mhz\n"); |
| break; |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\t80+80Mhz\n"); |
| break; |
| default: |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tUNKNOWN-MHZ: 0x%x\n", |
| (vhtc->cap >> 2) & 0x3); |
| } |
| PFLAG(RXLDPC, "RXLDPC"); |
| PFLAG(SHORT_GI_80, "SHORT-GI-80"); |
| PFLAG(SHORT_GI_160, "SHORT-GI-160"); |
| PFLAG(TXSTBC, "TXSTBC"); |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tRXSTBC_%d\n", (vhtc->cap >> 8) & 0x7); |
| PFLAG(SU_BEAMFORMER_CAPABLE, "SU-BEAMFORMER-CAPABLE"); |
| PFLAG(SU_BEAMFORMEE_CAPABLE, "SU-BEAMFORMEE-CAPABLE"); |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tBEAMFORMEE-STS: 0x%x\n", |
| (vhtc->cap & IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK) >> |
| IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT); |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tSOUNDING-DIMENSIONS: 0x%x\n", |
| (vhtc->cap & IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK) |
| >> IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT); |
| PFLAG(MU_BEAMFORMER_CAPABLE, "MU-BEAMFORMER-CAPABLE"); |
| PFLAG(MU_BEAMFORMEE_CAPABLE, "MU-BEAMFORMEE-CAPABLE"); |
| PFLAG(VHT_TXOP_PS, "TXOP-PS"); |
| PFLAG(HTC_VHT, "HTC-VHT"); |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tMPDU-LENGTH-EXPONENT: 0x%x\n", |
| (vhtc->cap & IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >> |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT); |
| PFLAG(VHT_LINK_ADAPTATION_VHT_UNSOL_MFB, |
| "LINK-ADAPTATION-VHT-UNSOL-MFB"); |
| p += scnprintf(p, bufsz + buf - p, |
| "\t\tLINK-ADAPTATION-VHT-MRQ-MFB: 0x%x\n", |
| (vhtc->cap & IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB) >> 26); |
| PFLAG(RX_ANTENNA_PATTERN, "RX-ANTENNA-PATTERN"); |
| PFLAG(TX_ANTENNA_PATTERN, "TX-ANTENNA-PATTERN"); |
| |
| p += scnprintf(p, bufsz + buf - p, "RX MCS: %.4x\n", |
| le16_to_cpu(vhtc->vht_mcs.rx_mcs_map)); |
| if (vhtc->vht_mcs.rx_highest) |
| p += scnprintf(p, bufsz + buf - p, |
| "MCS RX highest: %d Mbps\n", |
| le16_to_cpu(vhtc->vht_mcs.rx_highest)); |
| p += scnprintf(p, bufsz + buf - p, "TX MCS: %.4x\n", |
| le16_to_cpu(vhtc->vht_mcs.tx_mcs_map)); |
| if (vhtc->vht_mcs.tx_highest) |
| p += scnprintf(p, bufsz + buf - p, |
| "MCS TX highest: %d Mbps\n", |
| le16_to_cpu(vhtc->vht_mcs.tx_highest)); |
| #undef PFLAG |
| } |
| |
| ret = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| kfree(buf); |
| return ret; |
| } |
| LINK_STA_OPS(vht_capa); |
| |
| static ssize_t link_sta_he_capa_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf, *p; |
| size_t buf_sz = PAGE_SIZE; |
| struct link_sta_info *link_sta = file->private_data; |
| struct ieee80211_sta_he_cap *hec = &link_sta->pub->he_cap; |
| struct ieee80211_he_mcs_nss_supp *nss = &hec->he_mcs_nss_supp; |
| u8 ppe_size; |
| u8 *cap; |
| int i; |
| ssize_t ret; |
| |
| buf = kmalloc(buf_sz, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| p = buf; |
| |
| p += scnprintf(p, buf_sz + buf - p, "HE %ssupported\n", |
| hec->has_he ? "" : "not "); |
| if (!hec->has_he) |
| goto out; |
| |
| cap = hec->he_cap_elem.mac_cap_info; |
| p += scnprintf(p, buf_sz + buf - p, |
| "MAC-CAP: %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x\n", |
| cap[0], cap[1], cap[2], cap[3], cap[4], cap[5]); |
| |
| #define PRINT(fmt, ...) \ |
| p += scnprintf(p, buf_sz + buf - p, "\t\t" fmt "\n", \ |
| ##__VA_ARGS__) |
| |
| #define PFLAG(t, n, a, b) \ |
| do { \ |
| if (cap[n] & IEEE80211_HE_##t##_CAP##n##_##a) \ |
| PRINT("%s", b); \ |
| } while (0) |
| |
| #define PFLAG_RANGE(t, i, n, s, m, off, fmt) \ |
| do { \ |
| u8 msk = IEEE80211_HE_##t##_CAP##i##_##n##_MASK; \ |
| u8 idx = ((cap[i] & msk) >> (ffs(msk) - 1)) + off; \ |
| PRINT(fmt, (s << idx) + (m * idx)); \ |
| } while (0) |
| |
| #define PFLAG_RANGE_DEFAULT(t, i, n, s, m, off, fmt, a, b) \ |
| do { \ |
| if (cap[i] == IEEE80211_HE_##t ##_CAP##i##_##n##_##a) { \ |
| PRINT("%s", b); \ |
| break; \ |
| } \ |
| PFLAG_RANGE(t, i, n, s, m, off, fmt); \ |
| } while (0) |
| |
| PFLAG(MAC, 0, HTC_HE, "HTC-HE"); |
| PFLAG(MAC, 0, TWT_REQ, "TWT-REQ"); |
| PFLAG(MAC, 0, TWT_RES, "TWT-RES"); |
| PFLAG_RANGE_DEFAULT(MAC, 0, DYNAMIC_FRAG, 0, 1, 0, |
| "DYNAMIC-FRAG-LEVEL-%d", NOT_SUPP, "NOT-SUPP"); |
| PFLAG_RANGE_DEFAULT(MAC, 0, MAX_NUM_FRAG_MSDU, 1, 0, 0, |
| "MAX-NUM-FRAG-MSDU-%d", UNLIMITED, "UNLIMITED"); |
| |
| PFLAG_RANGE_DEFAULT(MAC, 1, MIN_FRAG_SIZE, 128, 0, -1, |
| "MIN-FRAG-SIZE-%d", UNLIMITED, "UNLIMITED"); |
| PFLAG_RANGE_DEFAULT(MAC, 1, TF_MAC_PAD_DUR, 0, 8, 0, |
| "TF-MAC-PAD-DUR-%dUS", MASK, "UNKNOWN"); |
| PFLAG_RANGE(MAC, 1, MULTI_TID_AGG_RX_QOS, 0, 1, 1, |
| "MULTI-TID-AGG-RX-QOS-%d"); |
| |
| if (cap[0] & IEEE80211_HE_MAC_CAP0_HTC_HE) { |
| switch (((cap[2] << 1) | (cap[1] >> 7)) & 0x3) { |
| case 0: |
| PRINT("LINK-ADAPTATION-NO-FEEDBACK"); |
| break; |
| case 1: |
| PRINT("LINK-ADAPTATION-RESERVED"); |
| break; |
| case 2: |
| PRINT("LINK-ADAPTATION-UNSOLICITED-FEEDBACK"); |
| break; |
| case 3: |
| PRINT("LINK-ADAPTATION-BOTH"); |
| break; |
| } |
| } |
| |
| PFLAG(MAC, 2, ALL_ACK, "ALL-ACK"); |
| PFLAG(MAC, 2, TRS, "TRS"); |
| PFLAG(MAC, 2, BSR, "BSR"); |
| PFLAG(MAC, 2, BCAST_TWT, "BCAST-TWT"); |
| PFLAG(MAC, 2, 32BIT_BA_BITMAP, "32BIT-BA-BITMAP"); |
| PFLAG(MAC, 2, MU_CASCADING, "MU-CASCADING"); |
| PFLAG(MAC, 2, ACK_EN, "ACK-EN"); |
| |
| PFLAG(MAC, 3, OMI_CONTROL, "OMI-CONTROL"); |
| PFLAG(MAC, 3, OFDMA_RA, "OFDMA-RA"); |
| |
| switch (cap[3] & IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK) { |
| case IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_0: |
| PRINT("MAX-AMPDU-LEN-EXP-USE-EXT-0"); |
| break; |
| case IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_1: |
| PRINT("MAX-AMPDU-LEN-EXP-VHT-EXT-1"); |
| break; |
| case IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_2: |
| PRINT("MAX-AMPDU-LEN-EXP-VHT-EXT-2"); |
| break; |
| case IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_3: |
| PRINT("MAX-AMPDU-LEN-EXP-VHT-EXT-3"); |
| break; |
| } |
| |
| PFLAG(MAC, 3, AMSDU_FRAG, "AMSDU-FRAG"); |
| PFLAG(MAC, 3, FLEX_TWT_SCHED, "FLEX-TWT-SCHED"); |
| PFLAG(MAC, 3, RX_CTRL_FRAME_TO_MULTIBSS, "RX-CTRL-FRAME-TO-MULTIBSS"); |
| |
| PFLAG(MAC, 4, BSRP_BQRP_A_MPDU_AGG, "BSRP-BQRP-A-MPDU-AGG"); |
| PFLAG(MAC, 4, QTP, "QTP"); |
| PFLAG(MAC, 4, BQR, "BQR"); |
| PFLAG(MAC, 4, PSR_RESP, "PSR-RESP"); |
| PFLAG(MAC, 4, NDP_FB_REP, "NDP-FB-REP"); |
| PFLAG(MAC, 4, OPS, "OPS"); |
| PFLAG(MAC, 4, AMSDU_IN_AMPDU, "AMSDU-IN-AMPDU"); |
| |
| PRINT("MULTI-TID-AGG-TX-QOS-%d", ((cap[5] << 1) | (cap[4] >> 7)) & 0x7); |
| |
| PFLAG(MAC, 5, SUBCHAN_SELECTIVE_TRANSMISSION, |
| "SUBCHAN-SELECTIVE-TRANSMISSION"); |
| PFLAG(MAC, 5, UL_2x996_TONE_RU, "UL-2x996-TONE-RU"); |
| PFLAG(MAC, 5, OM_CTRL_UL_MU_DATA_DIS_RX, "OM-CTRL-UL-MU-DATA-DIS-RX"); |
| PFLAG(MAC, 5, HE_DYNAMIC_SM_PS, "HE-DYNAMIC-SM-PS"); |
| PFLAG(MAC, 5, PUNCTURED_SOUNDING, "PUNCTURED-SOUNDING"); |
| PFLAG(MAC, 5, HT_VHT_TRIG_FRAME_RX, "HT-VHT-TRIG-FRAME-RX"); |
| |
| cap = hec->he_cap_elem.phy_cap_info; |
| p += scnprintf(p, buf_sz + buf - p, |
| "PHY CAP: %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x\n", |
| cap[0], cap[1], cap[2], cap[3], cap[4], cap[5], cap[6], |
| cap[7], cap[8], cap[9], cap[10]); |
| |
| PFLAG(PHY, 0, CHANNEL_WIDTH_SET_40MHZ_IN_2G, |
| "CHANNEL-WIDTH-SET-40MHZ-IN-2G"); |
| PFLAG(PHY, 0, CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G, |
| "CHANNEL-WIDTH-SET-40MHZ-80MHZ-IN-5G"); |
| PFLAG(PHY, 0, CHANNEL_WIDTH_SET_160MHZ_IN_5G, |
| "CHANNEL-WIDTH-SET-160MHZ-IN-5G"); |
| PFLAG(PHY, 0, CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G, |
| "CHANNEL-WIDTH-SET-80PLUS80-MHZ-IN-5G"); |
| PFLAG(PHY, 0, CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G, |
| "CHANNEL-WIDTH-SET-RU-MAPPING-IN-2G"); |
| PFLAG(PHY, 0, CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G, |
| "CHANNEL-WIDTH-SET-RU-MAPPING-IN-5G"); |
| |
| switch (cap[1] & IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK) { |
| case IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_20MHZ: |
| PRINT("PREAMBLE-PUNC-RX-80MHZ-ONLY-SECOND-20MHZ"); |
| break; |
| case IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_40MHZ: |
| PRINT("PREAMBLE-PUNC-RX-80MHZ-ONLY-SECOND-40MHZ"); |
| break; |
| case IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_20MHZ: |
| PRINT("PREAMBLE-PUNC-RX-160MHZ-ONLY-SECOND-20MHZ"); |
| break; |
| case IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_40MHZ: |
| PRINT("PREAMBLE-PUNC-RX-160MHZ-ONLY-SECOND-40MHZ"); |
| break; |
| } |
| |
| PFLAG(PHY, 1, DEVICE_CLASS_A, |
| "IEEE80211-HE-PHY-CAP1-DEVICE-CLASS-A"); |
| PFLAG(PHY, 1, LDPC_CODING_IN_PAYLOAD, |
| "LDPC-CODING-IN-PAYLOAD"); |
| PFLAG(PHY, 1, HE_LTF_AND_GI_FOR_HE_PPDUS_0_8US, |
| "HY-CAP1-HE-LTF-AND-GI-FOR-HE-PPDUS-0-8US"); |
| PRINT("MIDAMBLE-RX-MAX-NSTS-%d", ((cap[2] << 1) | (cap[1] >> 7)) & 0x3); |
| |
| PFLAG(PHY, 2, NDP_4x_LTF_AND_3_2US, "NDP-4X-LTF-AND-3-2US"); |
| PFLAG(PHY, 2, STBC_TX_UNDER_80MHZ, "STBC-TX-UNDER-80MHZ"); |
| PFLAG(PHY, 2, STBC_RX_UNDER_80MHZ, "STBC-RX-UNDER-80MHZ"); |
| PFLAG(PHY, 2, DOPPLER_TX, "DOPPLER-TX"); |
| PFLAG(PHY, 2, DOPPLER_RX, "DOPPLER-RX"); |
| PFLAG(PHY, 2, UL_MU_FULL_MU_MIMO, "UL-MU-FULL-MU-MIMO"); |
| PFLAG(PHY, 2, UL_MU_PARTIAL_MU_MIMO, "UL-MU-PARTIAL-MU-MIMO"); |
| |
| switch (cap[3] & IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK) { |
| case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_NO_DCM: |
| PRINT("DCM-MAX-CONST-TX-NO-DCM"); |
| break; |
| case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_BPSK: |
| PRINT("DCM-MAX-CONST-TX-BPSK"); |
| break; |
| case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK: |
| PRINT("DCM-MAX-CONST-TX-QPSK"); |
| break; |
| case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_16_QAM: |
| PRINT("DCM-MAX-CONST-TX-16-QAM"); |
| break; |
| } |
| |
| PFLAG(PHY, 3, DCM_MAX_TX_NSS_1, "DCM-MAX-TX-NSS-1"); |
| PFLAG(PHY, 3, DCM_MAX_TX_NSS_2, "DCM-MAX-TX-NSS-2"); |
| |
| switch (cap[3] & IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK) { |
| case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM: |
| PRINT("DCM-MAX-CONST-RX-NO-DCM"); |
| break; |
| case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_BPSK: |
| PRINT("DCM-MAX-CONST-RX-BPSK"); |
| break; |
| case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK: |
| PRINT("DCM-MAX-CONST-RX-QPSK"); |
| break; |
| case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_16_QAM: |
| PRINT("DCM-MAX-CONST-RX-16-QAM"); |
| break; |
| } |
| |
| PFLAG(PHY, 3, DCM_MAX_RX_NSS_1, "DCM-MAX-RX-NSS-1"); |
| PFLAG(PHY, 3, DCM_MAX_RX_NSS_2, "DCM-MAX-RX-NSS-2"); |
| PFLAG(PHY, 3, RX_PARTIAL_BW_SU_IN_20MHZ_MU, |
| "RX-PARTIAL-BW-SU-IN-20MHZ-MU"); |
| PFLAG(PHY, 3, SU_BEAMFORMER, "SU-BEAMFORMER"); |
| |
| PFLAG(PHY, 4, SU_BEAMFORMEE, "SU-BEAMFORMEE"); |
| PFLAG(PHY, 4, MU_BEAMFORMER, "MU-BEAMFORMER"); |
| |
| PFLAG_RANGE(PHY, 4, BEAMFORMEE_MAX_STS_UNDER_80MHZ, 0, 1, 4, |
| "BEAMFORMEE-MAX-STS-UNDER-%d"); |
| PFLAG_RANGE(PHY, 4, BEAMFORMEE_MAX_STS_ABOVE_80MHZ, 0, 1, 4, |
| "BEAMFORMEE-MAX-STS-ABOVE-%d"); |
| |
| PFLAG_RANGE(PHY, 5, BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ, 0, 1, 1, |
| "NUM-SND-DIM-UNDER-80MHZ-%d"); |
| PFLAG_RANGE(PHY, 5, BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ, 0, 1, 1, |
| "NUM-SND-DIM-ABOVE-80MHZ-%d"); |
| PFLAG(PHY, 5, NG16_SU_FEEDBACK, "NG16-SU-FEEDBACK"); |
| PFLAG(PHY, 5, NG16_MU_FEEDBACK, "NG16-MU-FEEDBACK"); |
| |
| PFLAG(PHY, 6, CODEBOOK_SIZE_42_SU, "CODEBOOK-SIZE-42-SU"); |
| PFLAG(PHY, 6, CODEBOOK_SIZE_75_MU, "CODEBOOK-SIZE-75-MU"); |
| PFLAG(PHY, 6, TRIG_SU_BEAMFORMING_FB, "TRIG-SU-BEAMFORMING-FB"); |
| PFLAG(PHY, 6, TRIG_MU_BEAMFORMING_PARTIAL_BW_FB, |
| "MU-BEAMFORMING-PARTIAL-BW-FB"); |
| PFLAG(PHY, 6, TRIG_CQI_FB, "TRIG-CQI-FB"); |
| PFLAG(PHY, 6, PARTIAL_BW_EXT_RANGE, "PARTIAL-BW-EXT-RANGE"); |
| PFLAG(PHY, 6, PARTIAL_BANDWIDTH_DL_MUMIMO, |
| "PARTIAL-BANDWIDTH-DL-MUMIMO"); |
| PFLAG(PHY, 6, PPE_THRESHOLD_PRESENT, "PPE-THRESHOLD-PRESENT"); |
| |
| PFLAG(PHY, 7, PSR_BASED_SR, "PSR-BASED-SR"); |
| PFLAG(PHY, 7, POWER_BOOST_FACTOR_SUPP, "POWER-BOOST-FACTOR-SUPP"); |
| PFLAG(PHY, 7, HE_SU_MU_PPDU_4XLTF_AND_08_US_GI, |
| "HE-SU-MU-PPDU-4XLTF-AND-08-US-GI"); |
| PFLAG_RANGE(PHY, 7, MAX_NC, 0, 1, 1, "MAX-NC-%d"); |
| PFLAG(PHY, 7, STBC_TX_ABOVE_80MHZ, "STBC-TX-ABOVE-80MHZ"); |
| PFLAG(PHY, 7, STBC_RX_ABOVE_80MHZ, "STBC-RX-ABOVE-80MHZ"); |
| |
| PFLAG(PHY, 8, HE_ER_SU_PPDU_4XLTF_AND_08_US_GI, |
| "HE-ER-SU-PPDU-4XLTF-AND-08-US-GI"); |
| PFLAG(PHY, 8, 20MHZ_IN_40MHZ_HE_PPDU_IN_2G, |
| "20MHZ-IN-40MHZ-HE-PPDU-IN-2G"); |
| PFLAG(PHY, 8, 20MHZ_IN_160MHZ_HE_PPDU, "20MHZ-IN-160MHZ-HE-PPDU"); |
| PFLAG(PHY, 8, 80MHZ_IN_160MHZ_HE_PPDU, "80MHZ-IN-160MHZ-HE-PPDU"); |
| PFLAG(PHY, 8, HE_ER_SU_1XLTF_AND_08_US_GI, |
| "HE-ER-SU-1XLTF-AND-08-US-GI"); |
| PFLAG(PHY, 8, MIDAMBLE_RX_TX_2X_AND_1XLTF, |
| "MIDAMBLE-RX-TX-2X-AND-1XLTF"); |
| |
| switch (cap[8] & IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_MASK) { |
| case IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_242: |
| PRINT("DCM-MAX-RU-242"); |
| break; |
| case IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_484: |
| PRINT("DCM-MAX-RU-484"); |
| break; |
| case IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_996: |
| PRINT("DCM-MAX-RU-996"); |
| break; |
| case IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_2x996: |
| PRINT("DCM-MAX-RU-2x996"); |
| break; |
| } |
| |
| PFLAG(PHY, 9, LONGER_THAN_16_SIGB_OFDM_SYM, |
| "LONGER-THAN-16-SIGB-OFDM-SYM"); |
| PFLAG(PHY, 9, NON_TRIGGERED_CQI_FEEDBACK, |
| "NON-TRIGGERED-CQI-FEEDBACK"); |
| PFLAG(PHY, 9, TX_1024_QAM_LESS_THAN_242_TONE_RU, |
| "TX-1024-QAM-LESS-THAN-242-TONE-RU"); |
| PFLAG(PHY, 9, RX_1024_QAM_LESS_THAN_242_TONE_RU, |
| "RX-1024-QAM-LESS-THAN-242-TONE-RU"); |
| PFLAG(PHY, 9, RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB, |
| "RX-FULL-BW-SU-USING-MU-WITH-COMP-SIGB"); |
| PFLAG(PHY, 9, RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB, |
| "RX-FULL-BW-SU-USING-MU-WITH-NON-COMP-SIGB"); |
| |
| switch (u8_get_bits(cap[9], |
| IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_MASK)) { |
| case IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_0US: |
| PRINT("NOMINAL-PACKET-PADDING-0US"); |
| break; |
| case IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_8US: |
| PRINT("NOMINAL-PACKET-PADDING-8US"); |
| break; |
| case IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_16US: |
| PRINT("NOMINAL-PACKET-PADDING-16US"); |
| break; |
| } |
| |
| #undef PFLAG_RANGE_DEFAULT |
| #undef PFLAG_RANGE |
| #undef PFLAG |
| |
| #define PRINT_NSS_SUPP(f, n) \ |
| do { \ |
| int _i; \ |
| u16 v = le16_to_cpu(nss->f); \ |
| p += scnprintf(p, buf_sz + buf - p, n ": %#.4x\n", v); \ |
| for (_i = 0; _i < 8; _i += 2) { \ |
| switch ((v >> _i) & 0x3) { \ |
| case 0: \ |
| PRINT(n "-%d-SUPPORT-0-7", _i / 2); \ |
| break; \ |
| case 1: \ |
| PRINT(n "-%d-SUPPORT-0-9", _i / 2); \ |
| break; \ |
| case 2: \ |
| PRINT(n "-%d-SUPPORT-0-11", _i / 2); \ |
| break; \ |
| case 3: \ |
| PRINT(n "-%d-NOT-SUPPORTED", _i / 2); \ |
| break; \ |
| } \ |
| } \ |
| } while (0) |
| |
| PRINT_NSS_SUPP(rx_mcs_80, "RX-MCS-80"); |
| PRINT_NSS_SUPP(tx_mcs_80, "TX-MCS-80"); |
| |
| if (cap[0] & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G) { |
| PRINT_NSS_SUPP(rx_mcs_160, "RX-MCS-160"); |
| PRINT_NSS_SUPP(tx_mcs_160, "TX-MCS-160"); |
| } |
| |
| if (cap[0] & |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G) { |
| PRINT_NSS_SUPP(rx_mcs_80p80, "RX-MCS-80P80"); |
| PRINT_NSS_SUPP(tx_mcs_80p80, "TX-MCS-80P80"); |
| } |
| |
| #undef PRINT_NSS_SUPP |
| #undef PRINT |
| |
| if (!(cap[6] & IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT)) |
| goto out; |
| |
| p += scnprintf(p, buf_sz + buf - p, "PPE-THRESHOLDS: %#.2x", |
| hec->ppe_thres[0]); |
| |
| ppe_size = ieee80211_he_ppe_size(hec->ppe_thres[0], cap); |
| for (i = 1; i < ppe_size; i++) { |
| p += scnprintf(p, buf_sz + buf - p, " %#.2x", |
| hec->ppe_thres[i]); |
| } |
| p += scnprintf(p, buf_sz + buf - p, "\n"); |
| |
| out: |
| ret = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| kfree(buf); |
| return ret; |
| } |
| LINK_STA_OPS(he_capa); |
| |
| static ssize_t link_sta_eht_capa_read(struct file *file, char __user *userbuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf, *p; |
| size_t buf_sz = PAGE_SIZE; |
| struct link_sta_info *link_sta = file->private_data; |
| struct ieee80211_sta_eht_cap *bec = &link_sta->pub->eht_cap; |
| struct ieee80211_eht_cap_elem_fixed *fixed = &bec->eht_cap_elem; |
| struct ieee80211_eht_mcs_nss_supp *nss = &bec->eht_mcs_nss_supp; |
| u8 *cap; |
| int i; |
| ssize_t ret; |
| static const char *mcs_desc[] = { "0-7", "8-9", "10-11", "12-13"}; |
| |
| buf = kmalloc(buf_sz, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| p = buf; |
| |
| p += scnprintf(p, buf_sz + buf - p, "EHT %ssupported\n", |
| bec->has_eht ? "" : "not "); |
| if (!bec->has_eht) |
| goto out; |
| |
| p += scnprintf(p, buf_sz + buf - p, |
| "MAC-CAP: %#.2x %#.2x\n", |
| fixed->mac_cap_info[0], fixed->mac_cap_info[1]); |
| p += scnprintf(p, buf_sz + buf - p, |
| "PHY-CAP: %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x\n", |
| fixed->phy_cap_info[0], fixed->phy_cap_info[1], |
| fixed->phy_cap_info[2], fixed->phy_cap_info[3], |
| fixed->phy_cap_info[4], fixed->phy_cap_info[5], |
| fixed->phy_cap_info[6], fixed->phy_cap_info[7], |
| fixed->phy_cap_info[8]); |
| |
| #define PRINT(fmt, ...) \ |
| p += scnprintf(p, buf_sz + buf - p, "\t\t" fmt "\n", \ |
| ##__VA_ARGS__) |
| |
| #define PFLAG(t, n, a, b) \ |
| do { \ |
| if (cap[n] & IEEE80211_EHT_##t##_CAP##n##_##a) \ |
| PRINT("%s", b); \ |
| } while (0) |
| |
| cap = fixed->mac_cap_info; |
| PFLAG(MAC, 0, EPCS_PRIO_ACCESS, "EPCS-PRIO-ACCESS"); |
| PFLAG(MAC, 0, OM_CONTROL, "OM-CONTROL"); |
| PFLAG(MAC, 0, TRIG_TXOP_SHARING_MODE1, "TRIG-TXOP-SHARING-MODE1"); |
| PFLAG(MAC, 0, TRIG_TXOP_SHARING_MODE2, "TRIG-TXOP-SHARING-MODE2"); |
| PFLAG(MAC, 0, RESTRICTED_TWT, "RESTRICTED-TWT"); |
| PFLAG(MAC, 0, SCS_TRAFFIC_DESC, "SCS-TRAFFIC-DESC"); |
| switch ((cap[0] & 0xc0) >> 6) { |
| case IEEE80211_EHT_MAC_CAP0_MAX_MPDU_LEN_3895: |
| PRINT("MAX-MPDU-LEN: 3985"); |
| break; |
| case IEEE80211_EHT_MAC_CAP0_MAX_MPDU_LEN_7991: |
| PRINT("MAX-MPDU-LEN: 7991"); |
| break; |
| case IEEE80211_EHT_MAC_CAP0_MAX_MPDU_LEN_11454: |
| PRINT("MAX-MPDU-LEN: 11454"); |
| break; |
| } |
| |
| cap = fixed->phy_cap_info; |
| PFLAG(PHY, 0, 320MHZ_IN_6GHZ, "320MHZ-IN-6GHZ"); |
| PFLAG(PHY, 0, 242_TONE_RU_GT20MHZ, "242-TONE-RU-GT20MHZ"); |
| PFLAG(PHY, 0, NDP_4_EHT_LFT_32_GI, "NDP-4-EHT-LFT-32-GI"); |
| PFLAG(PHY, 0, PARTIAL_BW_UL_MU_MIMO, "PARTIAL-BW-UL-MU-MIMO"); |
| PFLAG(PHY, 0, SU_BEAMFORMER, "SU-BEAMFORMER"); |
| PFLAG(PHY, 0, SU_BEAMFORMEE, "SU-BEAMFORMEE"); |
| i = cap[0] >> 7; |
| i |= (cap[1] & 0x3) << 1; |
| PRINT("BEAMFORMEE-80-NSS: %i", i); |
| PRINT("BEAMFORMEE-160-NSS: %i", (cap[1] >> 2) & 0x7); |
| PRINT("BEAMFORMEE-320-NSS: %i", (cap[1] >> 5) & 0x7); |
| PRINT("SOUNDING-DIM-80-NSS: %i", (cap[2] & 0x7)); |
| PRINT("SOUNDING-DIM-160-NSS: %i", (cap[2] >> 3) & 0x7); |
| i = cap[2] >> 6; |
| i |= (cap[3] & 0x1) << 3; |
| PRINT("SOUNDING-DIM-320-NSS: %i", i); |
| |
| PFLAG(PHY, 3, NG_16_SU_FEEDBACK, "NG-16-SU-FEEDBACK"); |
| PFLAG(PHY, 3, NG_16_MU_FEEDBACK, "NG-16-MU-FEEDBACK"); |
| PFLAG(PHY, 3, CODEBOOK_4_2_SU_FDBK, "CODEBOOK-4-2-SU-FDBK"); |
| PFLAG(PHY, 3, CODEBOOK_7_5_MU_FDBK, "CODEBOOK-7-5-MU-FDBK"); |
| PFLAG(PHY, 3, TRIG_SU_BF_FDBK, "TRIG-SU-BF-FDBK"); |
| PFLAG(PHY, 3, TRIG_MU_BF_PART_BW_FDBK, "TRIG-MU-BF-PART-BW-FDBK"); |
| PFLAG(PHY, 3, TRIG_CQI_FDBK, "TRIG-CQI-FDBK"); |
| |
| PFLAG(PHY, 4, PART_BW_DL_MU_MIMO, "PART-BW-DL-MU-MIMO"); |
| PFLAG(PHY, 4, PSR_SR_SUPP, "PSR-SR-SUPP"); |
| PFLAG(PHY, 4, POWER_BOOST_FACT_SUPP, "POWER-BOOST-FACT-SUPP"); |
| PFLAG(PHY, 4, EHT_MU_PPDU_4_EHT_LTF_08_GI, "EHT-MU-PPDU-4-EHT-LTF-08-GI"); |
| PRINT("MAX_NC: %i", cap[4] >> 4); |
| |
| PFLAG(PHY, 5, NON_TRIG_CQI_FEEDBACK, "NON-TRIG-CQI-FEEDBACK"); |
| PFLAG(PHY, 5, TX_LESS_242_TONE_RU_SUPP, "TX-LESS-242-TONE-RU-SUPP"); |
| PFLAG(PHY, 5, RX_LESS_242_TONE_RU_SUPP, "RX-LESS-242-TONE-RU-SUPP"); |
| PFLAG(PHY, 5, PPE_THRESHOLD_PRESENT, "PPE_THRESHOLD_PRESENT"); |
| switch (cap[5] >> 4 & 0x3) { |
| case IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_0US: |
| PRINT("NOMINAL_PKT_PAD: 0us"); |
| break; |
| case IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_8US: |
| PRINT("NOMINAL_PKT_PAD: 8us"); |
| break; |
| case IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_16US: |
| PRINT("NOMINAL_PKT_PAD: 16us"); |
| break; |
| case IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_20US: |
| PRINT("NOMINAL_PKT_PAD: 20us"); |
| break; |
| } |
| i = cap[5] >> 6; |
| i |= cap[6] & 0x7; |
| PRINT("MAX-NUM-SUPP-EHT-LTF: %i", i); |
| PFLAG(PHY, 5, SUPP_EXTRA_EHT_LTF, "SUPP-EXTRA-EHT-LTF"); |
| |
| i = (cap[6] >> 3) & 0xf; |
| PRINT("MCS15-SUPP-MASK: %i", i); |
| PFLAG(PHY, 6, EHT_DUP_6GHZ_SUPP, "EHT-DUP-6GHZ-SUPP"); |
| |
| PFLAG(PHY, 7, 20MHZ_STA_RX_NDP_WIDER_BW, "20MHZ-STA-RX-NDP-WIDER-BW"); |
| PFLAG(PHY, 7, NON_OFDMA_UL_MU_MIMO_80MHZ, "NON-OFDMA-UL-MU-MIMO-80MHZ"); |
| PFLAG(PHY, 7, NON_OFDMA_UL_MU_MIMO_160MHZ, "NON-OFDMA-UL-MU-MIMO-160MHZ"); |
| PFLAG(PHY, 7, NON_OFDMA_UL_MU_MIMO_320MHZ, "NON-OFDMA-UL-MU-MIMO-320MHZ"); |
| PFLAG(PHY, 7, MU_BEAMFORMER_80MHZ, "MU-BEAMFORMER-80MHZ"); |
| PFLAG(PHY, 7, MU_BEAMFORMER_160MHZ, "MU-BEAMFORMER-160MHZ"); |
| PFLAG(PHY, 7, MU_BEAMFORMER_320MHZ, "MU-BEAMFORMER-320MHZ"); |
| PFLAG(PHY, 7, TB_SOUNDING_FDBK_RATE_LIMIT, "TB-SOUNDING-FDBK-RATE-LIMIT"); |
| |
| PFLAG(PHY, 8, RX_1024QAM_WIDER_BW_DL_OFDMA, "RX-1024QAM-WIDER-BW-DL-OFDMA"); |
| PFLAG(PHY, 8, RX_4096QAM_WIDER_BW_DL_OFDMA, "RX-4096QAM-WIDER-BW-DL-OFDMA"); |
| |
| #undef PFLAG |
| |
| PRINT(""); /* newline */ |
| if (!(link_sta->pub->he_cap.he_cap_elem.phy_cap_info[0] & |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL)) { |
| u8 *mcs_vals = (u8 *)(&nss->only_20mhz); |
| |
| for (i = 0; i < 4; i++) |
| PRINT("EHT bw=20 MHz, max NSS for MCS %s: Rx=%u, Tx=%u", |
| mcs_desc[i], |
| mcs_vals[i] & 0xf, mcs_vals[i] >> 4); |
| } else { |
| u8 *mcs_vals = (u8 *)(&nss->bw._80); |
| |
| for (i = 0; i < 3; i++) |
| PRINT("EHT bw <= 80 MHz, max NSS for MCS %s: Rx=%u, Tx=%u", |
| mcs_desc[i + 1], |
| mcs_vals[i] & 0xf, mcs_vals[i] >> 4); |
| |
| mcs_vals = (u8 *)(&nss->bw._160); |
| for (i = 0; i < 3; i++) |
| PRINT("EHT bw <= 160 MHz, max NSS for MCS %s: Rx=%u, Tx=%u", |
| mcs_desc[i + 1], |
| mcs_vals[i] & 0xf, mcs_vals[i] >> 4); |
| |
| mcs_vals = (u8 *)(&nss->bw._320); |
| for (i = 0; i < 3; i++) |
| PRINT("EHT bw <= 320 MHz, max NSS for MCS %s: Rx=%u, Tx=%u", |
| mcs_desc[i + 1], |
| mcs_vals[i] & 0xf, mcs_vals[i] >> 4); |
| } |
| |
| if (cap[5] & IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT) { |
| u8 ppe_size = ieee80211_eht_ppe_size(bec->eht_ppe_thres[0], cap); |
| |
| p += scnprintf(p, buf_sz + buf - p, "EHT PPE Thresholds: "); |
| for (i = 0; i < ppe_size; i++) |
| p += scnprintf(p, buf_sz + buf - p, "0x%02x ", |
| bec->eht_ppe_thres[i]); |
| PRINT(""); /* newline */ |
| } |
| |
| out: |
| ret = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); |
| kfree(buf); |
| return ret; |
| } |
| LINK_STA_OPS(eht_capa); |
| |
| #define DEBUGFS_ADD(name) \ |
| debugfs_create_file(#name, 0400, \ |
| sta->debugfs_dir, sta, &sta_ ##name## _ops) |
| |
| #define DEBUGFS_ADD_COUNTER(name, field) \ |
| debugfs_create_ulong(#name, 0400, sta->debugfs_dir, &sta->field); |
| |
| void ieee80211_sta_debugfs_add(struct sta_info *sta) |
| { |
| struct ieee80211_local *local = sta->local; |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct dentry *stations_dir = sta->sdata->debugfs.subdir_stations; |
| u8 mac[3*ETH_ALEN]; |
| |
| if (!stations_dir) |
| return; |
| |
| snprintf(mac, sizeof(mac), "%pM", sta->sta.addr); |
| |
| /* |
| * This might fail due to a race condition: |
| * When mac80211 unlinks a station, the debugfs entries |
| * remain, but it is already possible to link a new |
| * station with the same address which triggers adding |
| * it to debugfs; therefore, if the old station isn't |
| * destroyed quickly enough the old station's debugfs |
| * dir might still be around. |
| */ |
| sta->debugfs_dir = debugfs_create_dir(mac, stations_dir); |
| |
| DEBUGFS_ADD(flags); |
| DEBUGFS_ADD(aid); |
| DEBUGFS_ADD(num_ps_buf_frames); |
| DEBUGFS_ADD(last_seq_ctrl); |
| DEBUGFS_ADD(agg_status); |
| /* FIXME: Kept here as the statistics are only done on the deflink */ |
| DEBUGFS_ADD_COUNTER(tx_filtered, deflink.status_stats.filtered); |
| |
| DEBUGFS_ADD(aqm); |
| DEBUGFS_ADD(airtime); |
| |
| if (wiphy_ext_feature_isset(local->hw.wiphy, |
| NL80211_EXT_FEATURE_AQL)) |
| DEBUGFS_ADD(aql); |
| |
| debugfs_create_xul("driver_buffered_tids", 0400, sta->debugfs_dir, |
| &sta->driver_buffered_tids); |
| |
| drv_sta_add_debugfs(local, sdata, &sta->sta, sta->debugfs_dir); |
| } |
| |
| void ieee80211_sta_debugfs_remove(struct sta_info *sta) |
| { |
| debugfs_remove_recursive(sta->debugfs_dir); |
| sta->debugfs_dir = NULL; |
| } |
| |
| #undef DEBUGFS_ADD |
| #undef DEBUGFS_ADD_COUNTER |
| |
| #define DEBUGFS_ADD(name) \ |
| debugfs_create_file(#name, 0400, \ |
| link_sta->debugfs_dir, link_sta, &link_sta_ ##name## _ops) |
| #define DEBUGFS_ADD_COUNTER(name, field) \ |
| debugfs_create_ulong(#name, 0400, link_sta->debugfs_dir, &link_sta->field) |
| |
| void ieee80211_link_sta_debugfs_add(struct link_sta_info *link_sta) |
| { |
| if (WARN_ON(!link_sta->sta->debugfs_dir)) |
| return; |
| |
| /* For non-MLO, leave the files in the main directory. */ |
| if (link_sta->sta->sta.valid_links) { |
| char link_dir_name[10]; |
| |
| snprintf(link_dir_name, sizeof(link_dir_name), |
| "link-%d", link_sta->link_id); |
| |
| link_sta->debugfs_dir = |
| debugfs_create_dir(link_dir_name, |
| link_sta->sta->debugfs_dir); |
| |
| DEBUGFS_ADD(addr); |
| } else { |
| if (WARN_ON(link_sta != &link_sta->sta->deflink)) |
| return; |
| |
| link_sta->debugfs_dir = link_sta->sta->debugfs_dir; |
| } |
| |
| DEBUGFS_ADD(ht_capa); |
| DEBUGFS_ADD(vht_capa); |
| DEBUGFS_ADD(he_capa); |
| DEBUGFS_ADD(eht_capa); |
| |
| DEBUGFS_ADD_COUNTER(rx_duplicates, rx_stats.num_duplicates); |
| DEBUGFS_ADD_COUNTER(rx_fragments, rx_stats.fragments); |
| } |
| |
| void ieee80211_link_sta_debugfs_remove(struct link_sta_info *link_sta) |
| { |
| if (!link_sta->debugfs_dir || !link_sta->sta->debugfs_dir) { |
| link_sta->debugfs_dir = NULL; |
| return; |
| } |
| |
| if (link_sta->debugfs_dir == link_sta->sta->debugfs_dir) { |
| WARN_ON(link_sta != &link_sta->sta->deflink); |
| link_sta->sta->debugfs_dir = NULL; |
| return; |
| } |
| |
| debugfs_remove_recursive(link_sta->debugfs_dir); |
| link_sta->debugfs_dir = NULL; |
| } |
| |
| void ieee80211_link_sta_debugfs_drv_add(struct link_sta_info *link_sta) |
| { |
| if (WARN_ON(!link_sta->debugfs_dir)) |
| return; |
| |
| drv_link_sta_add_debugfs(link_sta->sta->local, link_sta->sta->sdata, |
| link_sta->pub, link_sta->debugfs_dir); |
| } |
| |
| void ieee80211_link_sta_debugfs_drv_remove(struct link_sta_info *link_sta) |
| { |
| if (!link_sta->debugfs_dir) |
| return; |
| |
| if (WARN_ON(link_sta->debugfs_dir == link_sta->sta->debugfs_dir)) |
| return; |
| |
| /* Recreate the directory excluding the driver data */ |
| debugfs_remove_recursive(link_sta->debugfs_dir); |
| link_sta->debugfs_dir = NULL; |
| |
| ieee80211_link_sta_debugfs_add(link_sta); |
| } |