| What: /sys/devices/platform/eeepc/disp |
| Date: May 2008 |
| KernelVersion: 2.6.26 |
| Contact: "Corentin Chary" <corentincj@iksaif.net> |
| Description: |
| This file allows display switching. |
| |
| - 1 = LCD |
| - 2 = CRT |
| - 3 = LCD+CRT |
| |
| If you run X11, you should use xrandr instead. |
| |
| What: /sys/devices/platform/eeepc/camera |
| Date: May 2008 |
| KernelVersion: 2.6.26 |
| Contact: "Corentin Chary" <corentincj@iksaif.net> |
| Description: |
| Control the camera. 1 means on, 0 means off. |
| |
| What: /sys/devices/platform/eeepc/cardr |
| Date: May 2008 |
| KernelVersion: 2.6.26 |
| Contact: "Corentin Chary" <corentincj@iksaif.net> |
| Description: |
| Control the card reader. 1 means on, 0 means off. |
| |
| What: /sys/devices/platform/eeepc/cpufv |
| Date: Jun 2009 |
| KernelVersion: 2.6.31 |
| Contact: "Corentin Chary" <corentincj@iksaif.net> |
| Description: |
| Change CPU clock configuration. |
| On the Eee PC 1000H there are three available clock configuration: |
| |
| * 0 -> Super Performance Mode |
| * 1 -> High Performance Mode |
| * 2 -> Power Saving Mode |
| |
| On Eee PC 701 there is only 2 available clock configurations. |
| Available configuration are listed in available_cpufv file. |
| Reading this file will show the raw hexadecimal value which |
| is defined as follow:: |
| |
| | 8 bit | 8 bit | |
| | `---- Current mode |
| `------------ Availables modes |
| |
| For example, 0x301 means: mode 1 selected, 3 available modes. |
| |
| What: /sys/devices/platform/eeepc/available_cpufv |
| Date: Jun 2009 |
| KernelVersion: 2.6.31 |
| Contact: "Corentin Chary" <corentincj@iksaif.net> |
| Description: |
| List available cpufv modes. |
