| // SPDX-License-Identifier: GPL-2.0 |
| /* Include in trace.c */ |
| |
| #include <uapi/linux/sched/types.h> |
| #include <linux/stringify.h> |
| #include <linux/kthread.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| |
| static inline int trace_valid_entry(struct trace_entry *entry) |
| { |
| switch (entry->type) { |
| case TRACE_FN: |
| case TRACE_CTX: |
| case TRACE_WAKE: |
| case TRACE_STACK: |
| case TRACE_PRINT: |
| case TRACE_BRANCH: |
| case TRACE_GRAPH_ENT: |
| case TRACE_GRAPH_RET: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int trace_test_buffer_cpu(struct array_buffer *buf, int cpu) |
| { |
| struct ring_buffer_event *event; |
| struct trace_entry *entry; |
| unsigned int loops = 0; |
| |
| while ((event = ring_buffer_consume(buf->buffer, cpu, NULL, NULL))) { |
| entry = ring_buffer_event_data(event); |
| |
| /* |
| * The ring buffer is a size of trace_buf_size, if |
| * we loop more than the size, there's something wrong |
| * with the ring buffer. |
| */ |
| if (loops++ > trace_buf_size) { |
| printk(KERN_CONT ".. bad ring buffer "); |
| goto failed; |
| } |
| if (!trace_valid_entry(entry)) { |
| printk(KERN_CONT ".. invalid entry %d ", |
| entry->type); |
| goto failed; |
| } |
| } |
| return 0; |
| |
| failed: |
| /* disable tracing */ |
| tracing_disabled = 1; |
| printk(KERN_CONT ".. corrupted trace buffer .. "); |
| return -1; |
| } |
| |
| /* |
| * Test the trace buffer to see if all the elements |
| * are still sane. |
| */ |
| static int __maybe_unused trace_test_buffer(struct array_buffer *buf, unsigned long *count) |
| { |
| unsigned long flags, cnt = 0; |
| int cpu, ret = 0; |
| |
| /* Don't allow flipping of max traces now */ |
| local_irq_save(flags); |
| arch_spin_lock(&buf->tr->max_lock); |
| |
| cnt = ring_buffer_entries(buf->buffer); |
| |
| /* |
| * The trace_test_buffer_cpu runs a while loop to consume all data. |
| * If the calling tracer is broken, and is constantly filling |
| * the buffer, this will run forever, and hard lock the box. |
| * We disable the ring buffer while we do this test to prevent |
| * a hard lock up. |
| */ |
| tracing_off(); |
| for_each_possible_cpu(cpu) { |
| ret = trace_test_buffer_cpu(buf, cpu); |
| if (ret) |
| break; |
| } |
| tracing_on(); |
| arch_spin_unlock(&buf->tr->max_lock); |
| local_irq_restore(flags); |
| |
| if (count) |
| *count = cnt; |
| |
| return ret; |
| } |
| |
| static inline void warn_failed_init_tracer(struct tracer *trace, int init_ret) |
| { |
| printk(KERN_WARNING "Failed to init %s tracer, init returned %d\n", |
| trace->name, init_ret); |
| } |
| #ifdef CONFIG_FUNCTION_TRACER |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| |
| static int trace_selftest_test_probe1_cnt; |
| static void trace_selftest_test_probe1_func(unsigned long ip, |
| unsigned long pip, |
| struct ftrace_ops *op, |
| struct ftrace_regs *fregs) |
| { |
| trace_selftest_test_probe1_cnt++; |
| } |
| |
| static int trace_selftest_test_probe2_cnt; |
| static void trace_selftest_test_probe2_func(unsigned long ip, |
| unsigned long pip, |
| struct ftrace_ops *op, |
| struct ftrace_regs *fregs) |
| { |
| trace_selftest_test_probe2_cnt++; |
| } |
| |
| static int trace_selftest_test_probe3_cnt; |
| static void trace_selftest_test_probe3_func(unsigned long ip, |
| unsigned long pip, |
| struct ftrace_ops *op, |
| struct ftrace_regs *fregs) |
| { |
| trace_selftest_test_probe3_cnt++; |
| } |
| |
| static int trace_selftest_test_global_cnt; |
| static void trace_selftest_test_global_func(unsigned long ip, |
| unsigned long pip, |
| struct ftrace_ops *op, |
| struct ftrace_regs *fregs) |
| { |
| trace_selftest_test_global_cnt++; |
| } |
| |
| static int trace_selftest_test_dyn_cnt; |
| static void trace_selftest_test_dyn_func(unsigned long ip, |
| unsigned long pip, |
| struct ftrace_ops *op, |
| struct ftrace_regs *fregs) |
| { |
| trace_selftest_test_dyn_cnt++; |
| } |
| |
| static struct ftrace_ops test_probe1 = { |
| .func = trace_selftest_test_probe1_func, |
| }; |
| |
| static struct ftrace_ops test_probe2 = { |
| .func = trace_selftest_test_probe2_func, |
| }; |
| |
| static struct ftrace_ops test_probe3 = { |
| .func = trace_selftest_test_probe3_func, |
| }; |
| |
| static void print_counts(void) |
| { |
| printk("(%d %d %d %d %d) ", |
| trace_selftest_test_probe1_cnt, |
| trace_selftest_test_probe2_cnt, |
| trace_selftest_test_probe3_cnt, |
| trace_selftest_test_global_cnt, |
| trace_selftest_test_dyn_cnt); |
| } |
| |
| static void reset_counts(void) |
| { |
| trace_selftest_test_probe1_cnt = 0; |
| trace_selftest_test_probe2_cnt = 0; |
| trace_selftest_test_probe3_cnt = 0; |
| trace_selftest_test_global_cnt = 0; |
| trace_selftest_test_dyn_cnt = 0; |
| } |
| |
| static int trace_selftest_ops(struct trace_array *tr, int cnt) |
| { |
| int save_ftrace_enabled = ftrace_enabled; |
| struct ftrace_ops *dyn_ops; |
| char *func1_name; |
| char *func2_name; |
| int len1; |
| int len2; |
| int ret = -1; |
| |
| printk(KERN_CONT "PASSED\n"); |
| pr_info("Testing dynamic ftrace ops #%d: ", cnt); |
| |
| ftrace_enabled = 1; |
| reset_counts(); |
| |
| /* Handle PPC64 '.' name */ |
| func1_name = "*" __stringify(DYN_FTRACE_TEST_NAME); |
| func2_name = "*" __stringify(DYN_FTRACE_TEST_NAME2); |
| len1 = strlen(func1_name); |
| len2 = strlen(func2_name); |
| |
| /* |
| * Probe 1 will trace function 1. |
| * Probe 2 will trace function 2. |
| * Probe 3 will trace functions 1 and 2. |
| */ |
| ftrace_set_filter(&test_probe1, func1_name, len1, 1); |
| ftrace_set_filter(&test_probe2, func2_name, len2, 1); |
| ftrace_set_filter(&test_probe3, func1_name, len1, 1); |
| ftrace_set_filter(&test_probe3, func2_name, len2, 0); |
| |
| register_ftrace_function(&test_probe1); |
| register_ftrace_function(&test_probe2); |
| register_ftrace_function(&test_probe3); |
| /* First time we are running with main function */ |
| if (cnt > 1) { |
| ftrace_init_array_ops(tr, trace_selftest_test_global_func); |
| register_ftrace_function(tr->ops); |
| } |
| |
| DYN_FTRACE_TEST_NAME(); |
| |
| print_counts(); |
| |
| if (trace_selftest_test_probe1_cnt != 1) |
| goto out; |
| if (trace_selftest_test_probe2_cnt != 0) |
| goto out; |
| if (trace_selftest_test_probe3_cnt != 1) |
| goto out; |
| if (cnt > 1) { |
| if (trace_selftest_test_global_cnt == 0) |
| goto out; |
| } |
| |
| DYN_FTRACE_TEST_NAME2(); |
| |
| print_counts(); |
| |
| if (trace_selftest_test_probe1_cnt != 1) |
| goto out; |
| if (trace_selftest_test_probe2_cnt != 1) |
| goto out; |
| if (trace_selftest_test_probe3_cnt != 2) |
| goto out; |
| |
| /* Add a dynamic probe */ |
| dyn_ops = kzalloc(sizeof(*dyn_ops), GFP_KERNEL); |
| if (!dyn_ops) { |
| printk("MEMORY ERROR "); |
| goto out; |
| } |
| |
| dyn_ops->func = trace_selftest_test_dyn_func; |
| |
| register_ftrace_function(dyn_ops); |
| |
| trace_selftest_test_global_cnt = 0; |
| |
| DYN_FTRACE_TEST_NAME(); |
| |
| print_counts(); |
| |
| if (trace_selftest_test_probe1_cnt != 2) |
| goto out_free; |
| if (trace_selftest_test_probe2_cnt != 1) |
| goto out_free; |
| if (trace_selftest_test_probe3_cnt != 3) |
| goto out_free; |
| if (cnt > 1) { |
| if (trace_selftest_test_global_cnt == 0) |
| goto out_free; |
| } |
| if (trace_selftest_test_dyn_cnt == 0) |
| goto out_free; |
| |
| DYN_FTRACE_TEST_NAME2(); |
| |
| print_counts(); |
| |
| if (trace_selftest_test_probe1_cnt != 2) |
| goto out_free; |
| if (trace_selftest_test_probe2_cnt != 2) |
| goto out_free; |
| if (trace_selftest_test_probe3_cnt != 4) |
| goto out_free; |
| |
| /* Remove trace function from probe 3 */ |
| func1_name = "!" __stringify(DYN_FTRACE_TEST_NAME); |
| len1 = strlen(func1_name); |
| |
| ftrace_set_filter(&test_probe3, func1_name, len1, 0); |
| |
| DYN_FTRACE_TEST_NAME(); |
| |
| print_counts(); |
| |
| if (trace_selftest_test_probe1_cnt != 3) |
| goto out_free; |
| if (trace_selftest_test_probe2_cnt != 2) |
| goto out_free; |
| if (trace_selftest_test_probe3_cnt != 4) |
| goto out_free; |
| if (cnt > 1) { |
| if (trace_selftest_test_global_cnt == 0) |
| goto out_free; |
| } |
| if (trace_selftest_test_dyn_cnt == 0) |
| goto out_free; |
| |
| DYN_FTRACE_TEST_NAME2(); |
| |
| print_counts(); |
| |
| if (trace_selftest_test_probe1_cnt != 3) |
| goto out_free; |
| if (trace_selftest_test_probe2_cnt != 3) |
| goto out_free; |
| if (trace_selftest_test_probe3_cnt != 5) |
| goto out_free; |
| |
| ret = 0; |
| out_free: |
| unregister_ftrace_function(dyn_ops); |
| kfree(dyn_ops); |
| |
| out: |
| /* Purposely unregister in the same order */ |
| unregister_ftrace_function(&test_probe1); |
| unregister_ftrace_function(&test_probe2); |
| unregister_ftrace_function(&test_probe3); |
| if (cnt > 1) |
| unregister_ftrace_function(tr->ops); |
| ftrace_reset_array_ops(tr); |
| |
| /* Make sure everything is off */ |
| reset_counts(); |
| DYN_FTRACE_TEST_NAME(); |
| DYN_FTRACE_TEST_NAME(); |
| |
| if (trace_selftest_test_probe1_cnt || |
| trace_selftest_test_probe2_cnt || |
| trace_selftest_test_probe3_cnt || |
| trace_selftest_test_global_cnt || |
| trace_selftest_test_dyn_cnt) |
| ret = -1; |
| |
| ftrace_enabled = save_ftrace_enabled; |
| |
| return ret; |
| } |
| |
| /* Test dynamic code modification and ftrace filters */ |
| static int trace_selftest_startup_dynamic_tracing(struct tracer *trace, |
| struct trace_array *tr, |
| int (*func)(void)) |
| { |
| int save_ftrace_enabled = ftrace_enabled; |
| unsigned long count; |
| char *func_name; |
| int ret; |
| |
| /* The ftrace test PASSED */ |
| printk(KERN_CONT "PASSED\n"); |
| pr_info("Testing dynamic ftrace: "); |
| |
| /* enable tracing, and record the filter function */ |
| ftrace_enabled = 1; |
| |
| /* passed in by parameter to fool gcc from optimizing */ |
| func(); |
| |
| /* |
| * Some archs *cough*PowerPC*cough* add characters to the |
| * start of the function names. We simply put a '*' to |
| * accommodate them. |
| */ |
| func_name = "*" __stringify(DYN_FTRACE_TEST_NAME); |
| |
| /* filter only on our function */ |
| ftrace_set_global_filter(func_name, strlen(func_name), 1); |
| |
| /* enable tracing */ |
| ret = tracer_init(trace, tr); |
| if (ret) { |
| warn_failed_init_tracer(trace, ret); |
| goto out; |
| } |
| |
| /* Sleep for a 1/10 of a second */ |
| msleep(100); |
| |
| /* we should have nothing in the buffer */ |
| ret = trace_test_buffer(&tr->array_buffer, &count); |
| if (ret) |
| goto out; |
| |
| if (count) { |
| ret = -1; |
| printk(KERN_CONT ".. filter did not filter .. "); |
| goto out; |
| } |
| |
| /* call our function again */ |
| func(); |
| |
| /* sleep again */ |
| msleep(100); |
| |
| /* stop the tracing. */ |
| tracing_stop(); |
| ftrace_enabled = 0; |
| |
| /* check the trace buffer */ |
| ret = trace_test_buffer(&tr->array_buffer, &count); |
| |
| ftrace_enabled = 1; |
| tracing_start(); |
| |
| /* we should only have one item */ |
| if (!ret && count != 1) { |
| trace->reset(tr); |
| printk(KERN_CONT ".. filter failed count=%ld ..", count); |
| ret = -1; |
| goto out; |
| } |
| |
| /* Test the ops with global tracing running */ |
| ret = trace_selftest_ops(tr, 1); |
| trace->reset(tr); |
| |
| out: |
| ftrace_enabled = save_ftrace_enabled; |
| |
| /* Enable tracing on all functions again */ |
| ftrace_set_global_filter(NULL, 0, 1); |
| |
| /* Test the ops with global tracing off */ |
| if (!ret) |
| ret = trace_selftest_ops(tr, 2); |
| |
| return ret; |
| } |
| |
| static int trace_selftest_recursion_cnt; |
| static void trace_selftest_test_recursion_func(unsigned long ip, |
| unsigned long pip, |
| struct ftrace_ops *op, |
| struct ftrace_regs *fregs) |
| { |
| /* |
| * This function is registered without the recursion safe flag. |
| * The ftrace infrastructure should provide the recursion |
| * protection. If not, this will crash the kernel! |
| */ |
| if (trace_selftest_recursion_cnt++ > 10) |
| return; |
| DYN_FTRACE_TEST_NAME(); |
| } |
| |
| static void trace_selftest_test_recursion_safe_func(unsigned long ip, |
| unsigned long pip, |
| struct ftrace_ops *op, |
| struct ftrace_regs *fregs) |
| { |
| /* |
| * We said we would provide our own recursion. By calling |
| * this function again, we should recurse back into this function |
| * and count again. But this only happens if the arch supports |
| * all of ftrace features and nothing else is using the function |
| * tracing utility. |
| */ |
| if (trace_selftest_recursion_cnt++) |
| return; |
| DYN_FTRACE_TEST_NAME(); |
| } |
| |
| static struct ftrace_ops test_rec_probe = { |
| .func = trace_selftest_test_recursion_func, |
| .flags = FTRACE_OPS_FL_RECURSION, |
| }; |
| |
| static struct ftrace_ops test_recsafe_probe = { |
| .func = trace_selftest_test_recursion_safe_func, |
| }; |
| |
| static int |
| trace_selftest_function_recursion(void) |
| { |
| int save_ftrace_enabled = ftrace_enabled; |
| char *func_name; |
| int len; |
| int ret; |
| |
| /* The previous test PASSED */ |
| pr_cont("PASSED\n"); |
| pr_info("Testing ftrace recursion: "); |
| |
| |
| /* enable tracing, and record the filter function */ |
| ftrace_enabled = 1; |
| |
| /* Handle PPC64 '.' name */ |
| func_name = "*" __stringify(DYN_FTRACE_TEST_NAME); |
| len = strlen(func_name); |
| |
| ret = ftrace_set_filter(&test_rec_probe, func_name, len, 1); |
| if (ret) { |
| pr_cont("*Could not set filter* "); |
| goto out; |
| } |
| |
| ret = register_ftrace_function(&test_rec_probe); |
| if (ret) { |
| pr_cont("*could not register callback* "); |
| goto out; |
| } |
| |
| DYN_FTRACE_TEST_NAME(); |
| |
| unregister_ftrace_function(&test_rec_probe); |
| |
| ret = -1; |
| /* |
| * Recursion allows for transitions between context, |
| * and may call the callback twice. |
| */ |
| if (trace_selftest_recursion_cnt != 1 && |
| trace_selftest_recursion_cnt != 2) { |
| pr_cont("*callback not called once (or twice) (%d)* ", |
| trace_selftest_recursion_cnt); |
| goto out; |
| } |
| |
| trace_selftest_recursion_cnt = 1; |
| |
| pr_cont("PASSED\n"); |
| pr_info("Testing ftrace recursion safe: "); |
| |
| ret = ftrace_set_filter(&test_recsafe_probe, func_name, len, 1); |
| if (ret) { |
| pr_cont("*Could not set filter* "); |
| goto out; |
| } |
| |
| ret = register_ftrace_function(&test_recsafe_probe); |
| if (ret) { |
| pr_cont("*could not register callback* "); |
| goto out; |
| } |
| |
| DYN_FTRACE_TEST_NAME(); |
| |
| unregister_ftrace_function(&test_recsafe_probe); |
| |
| ret = -1; |
| if (trace_selftest_recursion_cnt != 2) { |
| pr_cont("*callback not called expected 2 times (%d)* ", |
| trace_selftest_recursion_cnt); |
| goto out; |
| } |
| |
| ret = 0; |
| out: |
| ftrace_enabled = save_ftrace_enabled; |
| |
| return ret; |
| } |
| #else |
| # define trace_selftest_startup_dynamic_tracing(trace, tr, func) ({ 0; }) |
| # define trace_selftest_function_recursion() ({ 0; }) |
| #endif /* CONFIG_DYNAMIC_FTRACE */ |
| |
| static enum { |
| TRACE_SELFTEST_REGS_START, |
| TRACE_SELFTEST_REGS_FOUND, |
| TRACE_SELFTEST_REGS_NOT_FOUND, |
| } trace_selftest_regs_stat; |
| |
| static void trace_selftest_test_regs_func(unsigned long ip, |
| unsigned long pip, |
| struct ftrace_ops *op, |
| struct ftrace_regs *fregs) |
| { |
| struct pt_regs *regs = ftrace_get_regs(fregs); |
| |
| if (regs) |
| trace_selftest_regs_stat = TRACE_SELFTEST_REGS_FOUND; |
| else |
| trace_selftest_regs_stat = TRACE_SELFTEST_REGS_NOT_FOUND; |
| } |
| |
| static struct ftrace_ops test_regs_probe = { |
| .func = trace_selftest_test_regs_func, |
| .flags = FTRACE_OPS_FL_SAVE_REGS, |
| }; |
| |
| static int |
| trace_selftest_function_regs(void) |
| { |
| int save_ftrace_enabled = ftrace_enabled; |
| char *func_name; |
| int len; |
| int ret; |
| int supported = 0; |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS |
| supported = 1; |
| #endif |
| |
| /* The previous test PASSED */ |
| pr_cont("PASSED\n"); |
| pr_info("Testing ftrace regs%s: ", |
| !supported ? "(no arch support)" : ""); |
| |
| /* enable tracing, and record the filter function */ |
| ftrace_enabled = 1; |
| |
| /* Handle PPC64 '.' name */ |
| func_name = "*" __stringify(DYN_FTRACE_TEST_NAME); |
| len = strlen(func_name); |
| |
| ret = ftrace_set_filter(&test_regs_probe, func_name, len, 1); |
| /* |
| * If DYNAMIC_FTRACE is not set, then we just trace all functions. |
| * This test really doesn't care. |
| */ |
| if (ret && ret != -ENODEV) { |
| pr_cont("*Could not set filter* "); |
| goto out; |
| } |
| |
| ret = register_ftrace_function(&test_regs_probe); |
| /* |
| * Now if the arch does not support passing regs, then this should |
| * have failed. |
| */ |
| if (!supported) { |
| if (!ret) { |
| pr_cont("*registered save-regs without arch support* "); |
| goto out; |
| } |
| test_regs_probe.flags |= FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED; |
| ret = register_ftrace_function(&test_regs_probe); |
| } |
| if (ret) { |
| pr_cont("*could not register callback* "); |
| goto out; |
| } |
| |
| |
| DYN_FTRACE_TEST_NAME(); |
| |
| unregister_ftrace_function(&test_regs_probe); |
| |
| ret = -1; |
| |
| switch (trace_selftest_regs_stat) { |
| case TRACE_SELFTEST_REGS_START: |
| pr_cont("*callback never called* "); |
| goto out; |
| |
| case TRACE_SELFTEST_REGS_FOUND: |
| if (supported) |
| break; |
| pr_cont("*callback received regs without arch support* "); |
| goto out; |
| |
| case TRACE_SELFTEST_REGS_NOT_FOUND: |
| if (!supported) |
| break; |
| pr_cont("*callback received NULL regs* "); |
| goto out; |
| } |
| |
| ret = 0; |
| out: |
| ftrace_enabled = save_ftrace_enabled; |
| |
| return ret; |
| } |
| |
| /* |
| * Simple verification test of ftrace function tracer. |
| * Enable ftrace, sleep 1/10 second, and then read the trace |
| * buffer to see if all is in order. |
| */ |
| __init int |
| trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) |
| { |
| int save_ftrace_enabled = ftrace_enabled; |
| unsigned long count; |
| int ret; |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| if (ftrace_filter_param) { |
| printk(KERN_CONT " ... kernel command line filter set: force PASS ... "); |
| return 0; |
| } |
| #endif |
| |
| /* make sure msleep has been recorded */ |
| msleep(1); |
| |
| /* start the tracing */ |
| ftrace_enabled = 1; |
| |
| ret = tracer_init(trace, tr); |
| if (ret) { |
| warn_failed_init_tracer(trace, ret); |
| goto out; |
| } |
| |
| /* Sleep for a 1/10 of a second */ |
| msleep(100); |
| /* stop the tracing. */ |
| tracing_stop(); |
| ftrace_enabled = 0; |
| |
| /* check the trace buffer */ |
| ret = trace_test_buffer(&tr->array_buffer, &count); |
| |
| ftrace_enabled = 1; |
| trace->reset(tr); |
| tracing_start(); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| goto out; |
| } |
| |
| ret = trace_selftest_startup_dynamic_tracing(trace, tr, |
| DYN_FTRACE_TEST_NAME); |
| if (ret) |
| goto out; |
| |
| ret = trace_selftest_function_recursion(); |
| if (ret) |
| goto out; |
| |
| ret = trace_selftest_function_regs(); |
| out: |
| ftrace_enabled = save_ftrace_enabled; |
| |
| /* kill ftrace totally if we failed */ |
| if (ret) |
| ftrace_kill(); |
| |
| return ret; |
| } |
| #endif /* CONFIG_FUNCTION_TRACER */ |
| |
| |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| |
| /* Maximum number of functions to trace before diagnosing a hang */ |
| #define GRAPH_MAX_FUNC_TEST 100000000 |
| |
| static unsigned int graph_hang_thresh; |
| |
| /* Wrap the real function entry probe to avoid possible hanging */ |
| static int trace_graph_entry_watchdog(struct ftrace_graph_ent *trace) |
| { |
| /* This is harmlessly racy, we want to approximately detect a hang */ |
| if (unlikely(++graph_hang_thresh > GRAPH_MAX_FUNC_TEST)) { |
| ftrace_graph_stop(); |
| printk(KERN_WARNING "BUG: Function graph tracer hang!\n"); |
| if (ftrace_dump_on_oops) { |
| ftrace_dump(DUMP_ALL); |
| /* ftrace_dump() disables tracing */ |
| tracing_on(); |
| } |
| return 0; |
| } |
| |
| return trace_graph_entry(trace); |
| } |
| |
| static struct fgraph_ops fgraph_ops __initdata = { |
| .entryfunc = &trace_graph_entry_watchdog, |
| .retfunc = &trace_graph_return, |
| }; |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS |
| #ifndef CALL_DEPTH_ACCOUNT |
| #define CALL_DEPTH_ACCOUNT "" |
| #endif |
| |
| noinline __noclone static void trace_direct_tramp(void) |
| { |
| asm(CALL_DEPTH_ACCOUNT); |
| } |
| #endif |
| |
| /* |
| * Pretty much the same than for the function tracer from which the selftest |
| * has been borrowed. |
| */ |
| __init int |
| trace_selftest_startup_function_graph(struct tracer *trace, |
| struct trace_array *tr) |
| { |
| int ret; |
| unsigned long count; |
| char *func_name __maybe_unused; |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| if (ftrace_filter_param) { |
| printk(KERN_CONT " ... kernel command line filter set: force PASS ... "); |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Simulate the init() callback but we attach a watchdog callback |
| * to detect and recover from possible hangs |
| */ |
| tracing_reset_online_cpus(&tr->array_buffer); |
| set_graph_array(tr); |
| ret = register_ftrace_graph(&fgraph_ops); |
| if (ret) { |
| warn_failed_init_tracer(trace, ret); |
| goto out; |
| } |
| tracing_start_cmdline_record(); |
| |
| /* Sleep for a 1/10 of a second */ |
| msleep(100); |
| |
| /* Have we just recovered from a hang? */ |
| if (graph_hang_thresh > GRAPH_MAX_FUNC_TEST) { |
| disable_tracing_selftest("recovering from a hang"); |
| ret = -1; |
| goto out; |
| } |
| |
| tracing_stop(); |
| |
| /* check the trace buffer */ |
| ret = trace_test_buffer(&tr->array_buffer, &count); |
| |
| /* Need to also simulate the tr->reset to remove this fgraph_ops */ |
| tracing_stop_cmdline_record(); |
| unregister_ftrace_graph(&fgraph_ops); |
| |
| tracing_start(); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| goto out; |
| } |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS |
| tracing_reset_online_cpus(&tr->array_buffer); |
| set_graph_array(tr); |
| |
| /* |
| * Some archs *cough*PowerPC*cough* add characters to the |
| * start of the function names. We simply put a '*' to |
| * accommodate them. |
| */ |
| func_name = "*" __stringify(DYN_FTRACE_TEST_NAME); |
| ftrace_set_global_filter(func_name, strlen(func_name), 1); |
| |
| /* |
| * Register direct function together with graph tracer |
| * and make sure we get graph trace. |
| */ |
| ret = register_ftrace_direct((unsigned long) DYN_FTRACE_TEST_NAME, |
| (unsigned long) trace_direct_tramp); |
| if (ret) |
| goto out; |
| |
| ret = register_ftrace_graph(&fgraph_ops); |
| if (ret) { |
| warn_failed_init_tracer(trace, ret); |
| goto out; |
| } |
| |
| DYN_FTRACE_TEST_NAME(); |
| |
| count = 0; |
| |
| tracing_stop(); |
| /* check the trace buffer */ |
| ret = trace_test_buffer(&tr->array_buffer, &count); |
| |
| unregister_ftrace_graph(&fgraph_ops); |
| |
| ret = unregister_ftrace_direct((unsigned long) DYN_FTRACE_TEST_NAME, |
| (unsigned long) trace_direct_tramp); |
| if (ret) |
| goto out; |
| |
| tracing_start(); |
| |
| if (!ret && !count) { |
| ret = -1; |
| goto out; |
| } |
| |
| /* Enable tracing on all functions again */ |
| ftrace_set_global_filter(NULL, 0, 1); |
| #endif |
| |
| /* Don't test dynamic tracing, the function tracer already did */ |
| out: |
| /* Stop it if we failed */ |
| if (ret) |
| ftrace_graph_stop(); |
| |
| return ret; |
| } |
| #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ |
| |
| |
| #ifdef CONFIG_IRQSOFF_TRACER |
| int |
| trace_selftest_startup_irqsoff(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long save_max = tr->max_latency; |
| unsigned long count; |
| int ret; |
| |
| /* start the tracing */ |
| ret = tracer_init(trace, tr); |
| if (ret) { |
| warn_failed_init_tracer(trace, ret); |
| return ret; |
| } |
| |
| /* reset the max latency */ |
| tr->max_latency = 0; |
| /* disable interrupts for a bit */ |
| local_irq_disable(); |
| udelay(100); |
| local_irq_enable(); |
| |
| /* |
| * Stop the tracer to avoid a warning subsequent |
| * to buffer flipping failure because tracing_stop() |
| * disables the tr and max buffers, making flipping impossible |
| * in case of parallels max irqs off latencies. |
| */ |
| trace->stop(tr); |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(&tr->array_buffer, NULL); |
| if (!ret) |
| ret = trace_test_buffer(&tr->max_buffer, &count); |
| trace->reset(tr); |
| tracing_start(); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| } |
| |
| tr->max_latency = save_max; |
| |
| return ret; |
| } |
| #endif /* CONFIG_IRQSOFF_TRACER */ |
| |
| #ifdef CONFIG_PREEMPT_TRACER |
| int |
| trace_selftest_startup_preemptoff(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long save_max = tr->max_latency; |
| unsigned long count; |
| int ret; |
| |
| /* |
| * Now that the big kernel lock is no longer preemptible, |
| * and this is called with the BKL held, it will always |
| * fail. If preemption is already disabled, simply |
| * pass the test. When the BKL is removed, or becomes |
| * preemptible again, we will once again test this, |
| * so keep it in. |
| */ |
| if (preempt_count()) { |
| printk(KERN_CONT "can not test ... force "); |
| return 0; |
| } |
| |
| /* start the tracing */ |
| ret = tracer_init(trace, tr); |
| if (ret) { |
| warn_failed_init_tracer(trace, ret); |
| return ret; |
| } |
| |
| /* reset the max latency */ |
| tr->max_latency = 0; |
| /* disable preemption for a bit */ |
| preempt_disable(); |
| udelay(100); |
| preempt_enable(); |
| |
| /* |
| * Stop the tracer to avoid a warning subsequent |
| * to buffer flipping failure because tracing_stop() |
| * disables the tr and max buffers, making flipping impossible |
| * in case of parallels max preempt off latencies. |
| */ |
| trace->stop(tr); |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(&tr->array_buffer, NULL); |
| if (!ret) |
| ret = trace_test_buffer(&tr->max_buffer, &count); |
| trace->reset(tr); |
| tracing_start(); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| } |
| |
| tr->max_latency = save_max; |
| |
| return ret; |
| } |
| #endif /* CONFIG_PREEMPT_TRACER */ |
| |
| #if defined(CONFIG_IRQSOFF_TRACER) && defined(CONFIG_PREEMPT_TRACER) |
| int |
| trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long save_max = tr->max_latency; |
| unsigned long count; |
| int ret; |
| |
| /* |
| * Now that the big kernel lock is no longer preemptible, |
| * and this is called with the BKL held, it will always |
| * fail. If preemption is already disabled, simply |
| * pass the test. When the BKL is removed, or becomes |
| * preemptible again, we will once again test this, |
| * so keep it in. |
| */ |
| if (preempt_count()) { |
| printk(KERN_CONT "can not test ... force "); |
| return 0; |
| } |
| |
| /* start the tracing */ |
| ret = tracer_init(trace, tr); |
| if (ret) { |
| warn_failed_init_tracer(trace, ret); |
| goto out_no_start; |
| } |
| |
| /* reset the max latency */ |
| tr->max_latency = 0; |
| |
| /* disable preemption and interrupts for a bit */ |
| preempt_disable(); |
| local_irq_disable(); |
| udelay(100); |
| preempt_enable(); |
| /* reverse the order of preempt vs irqs */ |
| local_irq_enable(); |
| |
| /* |
| * Stop the tracer to avoid a warning subsequent |
| * to buffer flipping failure because tracing_stop() |
| * disables the tr and max buffers, making flipping impossible |
| * in case of parallels max irqs/preempt off latencies. |
| */ |
| trace->stop(tr); |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(&tr->array_buffer, NULL); |
| if (ret) |
| goto out; |
| |
| ret = trace_test_buffer(&tr->max_buffer, &count); |
| if (ret) |
| goto out; |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| goto out; |
| } |
| |
| /* do the test by disabling interrupts first this time */ |
| tr->max_latency = 0; |
| tracing_start(); |
| trace->start(tr); |
| |
| preempt_disable(); |
| local_irq_disable(); |
| udelay(100); |
| preempt_enable(); |
| /* reverse the order of preempt vs irqs */ |
| local_irq_enable(); |
| |
| trace->stop(tr); |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(&tr->array_buffer, NULL); |
| if (ret) |
| goto out; |
| |
| ret = trace_test_buffer(&tr->max_buffer, &count); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| goto out; |
| } |
| |
| out: |
| tracing_start(); |
| out_no_start: |
| trace->reset(tr); |
| tr->max_latency = save_max; |
| |
| return ret; |
| } |
| #endif /* CONFIG_IRQSOFF_TRACER && CONFIG_PREEMPT_TRACER */ |
| |
| #ifdef CONFIG_NOP_TRACER |
| int |
| trace_selftest_startup_nop(struct tracer *trace, struct trace_array *tr) |
| { |
| /* What could possibly go wrong? */ |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_SCHED_TRACER |
| |
| struct wakeup_test_data { |
| struct completion is_ready; |
| int go; |
| }; |
| |
| static int trace_wakeup_test_thread(void *data) |
| { |
| /* Make this a -deadline thread */ |
| static const struct sched_attr attr = { |
| .sched_policy = SCHED_DEADLINE, |
| .sched_runtime = 100000ULL, |
| .sched_deadline = 10000000ULL, |
| .sched_period = 10000000ULL |
| }; |
| struct wakeup_test_data *x = data; |
| |
| sched_setattr(current, &attr); |
| |
| /* Make it know we have a new prio */ |
| complete(&x->is_ready); |
| |
| /* now go to sleep and let the test wake us up */ |
| set_current_state(TASK_INTERRUPTIBLE); |
| while (!x->go) { |
| schedule(); |
| set_current_state(TASK_INTERRUPTIBLE); |
| } |
| |
| complete(&x->is_ready); |
| |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| /* we are awake, now wait to disappear */ |
| while (!kthread_should_stop()) { |
| schedule(); |
| set_current_state(TASK_INTERRUPTIBLE); |
| } |
| |
| __set_current_state(TASK_RUNNING); |
| |
| return 0; |
| } |
| int |
| trace_selftest_startup_wakeup(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long save_max = tr->max_latency; |
| struct task_struct *p; |
| struct wakeup_test_data data; |
| unsigned long count; |
| int ret; |
| |
| memset(&data, 0, sizeof(data)); |
| |
| init_completion(&data.is_ready); |
| |
| /* create a -deadline thread */ |
| p = kthread_run(trace_wakeup_test_thread, &data, "ftrace-test"); |
| if (IS_ERR(p)) { |
| printk(KERN_CONT "Failed to create ftrace wakeup test thread "); |
| return -1; |
| } |
| |
| /* make sure the thread is running at -deadline policy */ |
| wait_for_completion(&data.is_ready); |
| |
| /* start the tracing */ |
| ret = tracer_init(trace, tr); |
| if (ret) { |
| warn_failed_init_tracer(trace, ret); |
| return ret; |
| } |
| |
| /* reset the max latency */ |
| tr->max_latency = 0; |
| |
| while (p->on_rq) { |
| /* |
| * Sleep to make sure the -deadline thread is asleep too. |
| * On virtual machines we can't rely on timings, |
| * but we want to make sure this test still works. |
| */ |
| msleep(100); |
| } |
| |
| init_completion(&data.is_ready); |
| |
| data.go = 1; |
| /* memory barrier is in the wake_up_process() */ |
| |
| wake_up_process(p); |
| |
| /* Wait for the task to wake up */ |
| wait_for_completion(&data.is_ready); |
| |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check both trace buffers */ |
| ret = trace_test_buffer(&tr->array_buffer, NULL); |
| if (!ret) |
| ret = trace_test_buffer(&tr->max_buffer, &count); |
| |
| |
| trace->reset(tr); |
| tracing_start(); |
| |
| tr->max_latency = save_max; |
| |
| /* kill the thread */ |
| kthread_stop(p); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| } |
| |
| return ret; |
| } |
| #endif /* CONFIG_SCHED_TRACER */ |
| |
| #ifdef CONFIG_BRANCH_TRACER |
| int |
| trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr) |
| { |
| unsigned long count; |
| int ret; |
| |
| /* start the tracing */ |
| ret = tracer_init(trace, tr); |
| if (ret) { |
| warn_failed_init_tracer(trace, ret); |
| return ret; |
| } |
| |
| /* Sleep for a 1/10 of a second */ |
| msleep(100); |
| /* stop the tracing. */ |
| tracing_stop(); |
| /* check the trace buffer */ |
| ret = trace_test_buffer(&tr->array_buffer, &count); |
| trace->reset(tr); |
| tracing_start(); |
| |
| if (!ret && !count) { |
| printk(KERN_CONT ".. no entries found .."); |
| ret = -1; |
| } |
| |
| return ret; |
| } |
| #endif /* CONFIG_BRANCH_TRACER */ |
| |