| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * A sample program to run a User VM on the ACRN hypervisor |
| * |
| * This sample runs in a Service VM, which is a privileged VM of ACRN. |
| * CONFIG_ACRN_HSM need to be enabled in the Service VM. |
| * |
| * Guest VM code in guest16.s will be executed after the VM launched. |
| * |
| * Copyright (C) 2020 Intel Corporation. All rights reserved. |
| */ |
| #include <stdio.h> |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <malloc.h> |
| #include <fcntl.h> |
| #include <unistd.h> |
| #include <signal.h> |
| #include <sys/ioctl.h> |
| #include <linux/acrn.h> |
| |
| #define GUEST_MEMORY_SIZE (1024*1024) |
| void *guest_memory; |
| |
| extern const unsigned char guest16[], guest16_end[]; |
| static char io_request_page[4096] __attribute__((aligned(4096))); |
| static struct acrn_io_request *io_req_buf = (struct acrn_io_request *)io_request_page; |
| |
| __u16 vcpu_num; |
| __u16 vmid; |
| |
| int hsm_fd; |
| int is_running = 1; |
| |
| void vm_exit(int sig) |
| { |
| sig = sig; |
| |
| is_running = 0; |
| ioctl(hsm_fd, ACRN_IOCTL_PAUSE_VM, vmid); |
| ioctl(hsm_fd, ACRN_IOCTL_DESTROY_IOREQ_CLIENT, 0); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| int vcpu_id, ret; |
| struct acrn_vm_creation create_vm = {0}; |
| struct acrn_vm_memmap ram_map = {0}; |
| struct acrn_vcpu_regs regs; |
| struct acrn_io_request *io_req; |
| struct acrn_ioreq_notify __attribute__((aligned(8))) notify; |
| |
| argc = argc; |
| argv = argv; |
| |
| guest_memory = memalign(4096, GUEST_MEMORY_SIZE); |
| if (!guest_memory) { |
| printf("No enough memory!\n"); |
| return -1; |
| } |
| hsm_fd = open("/dev/acrn_hsm", O_RDWR|O_CLOEXEC); |
| |
| create_vm.ioreq_buf = (__u64)io_req_buf; |
| ret = ioctl(hsm_fd, ACRN_IOCTL_CREATE_VM, &create_vm); |
| printf("Created VM! [%d]\n", ret); |
| vcpu_num = create_vm.vcpu_num; |
| vmid = create_vm.vmid; |
| |
| /* setup guest memory */ |
| ram_map.type = ACRN_MEMMAP_RAM; |
| ram_map.vma_base = (__u64)guest_memory; |
| ram_map.len = GUEST_MEMORY_SIZE; |
| ram_map.user_vm_pa = 0; |
| ram_map.attr = ACRN_MEM_ACCESS_RWX; |
| ret = ioctl(hsm_fd, ACRN_IOCTL_SET_MEMSEG, &ram_map); |
| printf("Set up VM memory! [%d]\n", ret); |
| |
| memcpy(guest_memory, guest16, guest16_end-guest16); |
| |
| /* setup vcpu registers */ |
| memset(®s, 0, sizeof(regs)); |
| regs.vcpu_id = 0; |
| regs.vcpu_regs.rip = 0; |
| |
| /* CR0_ET | CR0_NE */ |
| regs.vcpu_regs.cr0 = 0x30U; |
| regs.vcpu_regs.cs_ar = 0x009FU; |
| regs.vcpu_regs.cs_sel = 0xF000U; |
| regs.vcpu_regs.cs_limit = 0xFFFFU; |
| regs.vcpu_regs.cs_base = 0 & 0xFFFF0000UL; |
| regs.vcpu_regs.rip = 0 & 0xFFFFUL; |
| |
| ret = ioctl(hsm_fd, ACRN_IOCTL_SET_VCPU_REGS, ®s); |
| printf("Set up VM BSP registers! [%d]\n", ret); |
| |
| /* create an ioreq client for this VM */ |
| ret = ioctl(hsm_fd, ACRN_IOCTL_CREATE_IOREQ_CLIENT, 0); |
| printf("Created IO request client! [%d]\n", ret); |
| |
| /* run vm */ |
| ret = ioctl(hsm_fd, ACRN_IOCTL_START_VM, vmid); |
| printf("Start VM! [%d]\n", ret); |
| |
| signal(SIGINT, vm_exit); |
| while (is_running) { |
| ret = ioctl(hsm_fd, ACRN_IOCTL_ATTACH_IOREQ_CLIENT, 0); |
| |
| for (vcpu_id = 0; vcpu_id < vcpu_num; vcpu_id++) { |
| io_req = &io_req_buf[vcpu_id]; |
| if ((__sync_add_and_fetch(&io_req->processed, 0) == ACRN_IOREQ_STATE_PROCESSING) |
| && (!io_req->kernel_handled)) |
| if (io_req->type == ACRN_IOREQ_TYPE_PORTIO) { |
| int bytes, port, in; |
| |
| port = io_req->reqs.pio_request.address; |
| bytes = io_req->reqs.pio_request.size; |
| in = (io_req->reqs.pio_request.direction == ACRN_IOREQ_DIR_READ); |
| printf("Guest VM %s PIO[%x] with size[%x]\n", in ? "read" : "write", port, bytes); |
| |
| notify.vmid = vmid; |
| notify.vcpu = vcpu_id; |
| ioctl(hsm_fd, ACRN_IOCTL_NOTIFY_REQUEST_FINISH, ¬ify); |
| } |
| } |
| } |
| |
| ret = ioctl(hsm_fd, ACRN_IOCTL_DESTROY_VM, NULL); |
| printf("Destroy VM! [%d]\n", ret); |
| close(hsm_fd); |
| free(guest_memory); |
| return 0; |
| } |