| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2021-2022 NVIDIA Corporation |
| * |
| * Author: Dipen Patel <dipenp@nvidia.com> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio.h> |
| #include <linux/timer.h> |
| #include <linux/platform_device.h> |
| #include <linux/workqueue.h> |
| #include <linux/hte.h> |
| |
| /* |
| * This sample HTE GPIO test driver demonstrates HTE API usage by enabling |
| * hardware timestamp on gpio_in and specified LIC IRQ lines. |
| * |
| * Note: gpio_out and gpio_in need to be shorted externally in order for this |
| * test driver to work for the GPIO monitoring. The test driver has been |
| * tested on Jetson AGX Xavier platform by shorting pin 32 and 16 on 40 pin |
| * header. |
| * |
| * Device tree snippet to activate this driver: |
| * tegra_hte_test { |
| * compatible = "nvidia,tegra194-hte-test"; |
| * in-gpio = <&gpio_aon TEGRA194_AON_GPIO(BB, 1)>; |
| * out-gpio = <&gpio_aon TEGRA194_AON_GPIO(BB, 0)>; |
| * timestamps = <&tegra_hte_aon TEGRA194_AON_GPIO(BB, 1)>, |
| * <&tegra_hte_lic 0x19>; |
| * timestamp-names = "hte-gpio", "hte-i2c-irq"; |
| * status = "okay"; |
| * }; |
| * |
| * How to run test driver: |
| * - Load test driver. |
| * - For the GPIO, at regular interval gpio_out pin toggles triggering |
| * HTE for rising edge on gpio_in pin. |
| * |
| * - For the LIC IRQ line, it uses 0x19 interrupt which is i2c controller 1. |
| * - Run i2cdetect -y 1 1>/dev/null, this command will generate i2c bus |
| * transactions which creates timestamp data. |
| * - It prints below message for both the lines. |
| * HW timestamp(<line id>:<ts seq number>): <timestamp>, edge: <edge>. |
| * - Unloading the driver disables and deallocate the HTE. |
| */ |
| |
| static struct tegra_hte_test { |
| int gpio_in_irq; |
| struct device *pdev; |
| struct gpio_desc *gpio_in; |
| struct gpio_desc *gpio_out; |
| struct hte_ts_desc *desc; |
| struct timer_list timer; |
| struct kobject *kobj; |
| } hte; |
| |
| static enum hte_return process_hw_ts(struct hte_ts_data *ts, void *p) |
| { |
| char *edge; |
| struct hte_ts_desc *desc = p; |
| |
| if (!ts || !p) |
| return HTE_CB_HANDLED; |
| |
| if (ts->raw_level < 0) |
| edge = "Unknown"; |
| |
| pr_info("HW timestamp(%u: %llu): %llu, edge: %s\n", |
| desc->attr.line_id, ts->seq, ts->tsc, |
| (ts->raw_level >= 0) ? ((ts->raw_level == 0) ? |
| "falling" : "rising") : edge); |
| |
| return HTE_CB_HANDLED; |
| } |
| |
| static void gpio_timer_cb(struct timer_list *t) |
| { |
| (void)t; |
| |
| gpiod_set_value(hte.gpio_out, !gpiod_get_value(hte.gpio_out)); |
| mod_timer(&hte.timer, jiffies + msecs_to_jiffies(8000)); |
| } |
| |
| static irqreturn_t tegra_hte_test_gpio_isr(int irq, void *data) |
| { |
| (void)irq; |
| (void)data; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct of_device_id tegra_hte_test_of_match[] = { |
| { .compatible = "nvidia,tegra194-hte-test"}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, tegra_hte_test_of_match); |
| |
| static int tegra_hte_test_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| int i, cnt; |
| |
| dev_set_drvdata(&pdev->dev, &hte); |
| hte.pdev = &pdev->dev; |
| |
| hte.gpio_out = gpiod_get(&pdev->dev, "out", 0); |
| if (IS_ERR(hte.gpio_out)) { |
| dev_err(&pdev->dev, "failed to get gpio out\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| hte.gpio_in = gpiod_get(&pdev->dev, "in", 0); |
| if (IS_ERR(hte.gpio_in)) { |
| dev_err(&pdev->dev, "failed to get gpio in\n"); |
| ret = -EINVAL; |
| goto free_gpio_out; |
| } |
| |
| ret = gpiod_direction_output(hte.gpio_out, 0); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to set output\n"); |
| ret = -EINVAL; |
| goto free_gpio_in; |
| } |
| |
| ret = gpiod_direction_input(hte.gpio_in); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to set input\n"); |
| ret = -EINVAL; |
| goto free_gpio_in; |
| } |
| |
| ret = gpiod_to_irq(hte.gpio_in); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to map GPIO to IRQ: %d\n", ret); |
| ret = -ENXIO; |
| goto free_gpio_in; |
| } |
| |
| hte.gpio_in_irq = ret; |
| ret = request_irq(ret, tegra_hte_test_gpio_isr, |
| IRQF_TRIGGER_RISING, |
| "tegra_hte_gpio_test_isr", &hte); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to acquire IRQ\n"); |
| ret = -ENXIO; |
| goto free_irq; |
| } |
| |
| cnt = of_hte_req_count(hte.pdev); |
| if (cnt < 0) |
| goto free_irq; |
| |
| dev_info(&pdev->dev, "Total requested lines:%d\n", cnt); |
| |
| hte.desc = devm_kzalloc(hte.pdev, sizeof(*hte.desc) * cnt, GFP_KERNEL); |
| if (!hte.desc) { |
| ret = -ENOMEM; |
| goto free_irq; |
| } |
| |
| for (i = 0; i < cnt; i++) { |
| if (i == 0) |
| /* |
| * GPIO hte init, line_id and name will be parsed from |
| * the device tree node. The edge_flag is implicitly |
| * set by request_irq call. Only line_data is needed to be |
| * set. |
| */ |
| hte_init_line_attr(&hte.desc[i], 0, 0, NULL, |
| hte.gpio_in); |
| else |
| /* |
| * same comment as above except that IRQ does not need |
| * line data. |
| */ |
| hte_init_line_attr(&hte.desc[i], 0, 0, NULL, NULL); |
| |
| ret = hte_ts_get(hte.pdev, &hte.desc[i], i); |
| if (ret) |
| goto ts_put; |
| |
| ret = devm_hte_request_ts_ns(hte.pdev, &hte.desc[i], |
| process_hw_ts, NULL, |
| &hte.desc[i]); |
| if (ret) /* no need to ts_put, request API takes care */ |
| goto free_irq; |
| } |
| |
| timer_setup(&hte.timer, gpio_timer_cb, 0); |
| mod_timer(&hte.timer, jiffies + msecs_to_jiffies(5000)); |
| |
| return 0; |
| |
| ts_put: |
| cnt = i; |
| for (i = 0; i < cnt; i++) |
| hte_ts_put(&hte.desc[i]); |
| free_irq: |
| free_irq(hte.gpio_in_irq, &hte); |
| free_gpio_in: |
| gpiod_put(hte.gpio_in); |
| free_gpio_out: |
| gpiod_put(hte.gpio_out); |
| out: |
| |
| return ret; |
| } |
| |
| static int tegra_hte_test_remove(struct platform_device *pdev) |
| { |
| (void)pdev; |
| |
| free_irq(hte.gpio_in_irq, &hte); |
| gpiod_put(hte.gpio_in); |
| gpiod_put(hte.gpio_out); |
| del_timer_sync(&hte.timer); |
| |
| return 0; |
| } |
| |
| static struct platform_driver tegra_hte_test_driver = { |
| .probe = tegra_hte_test_probe, |
| .remove = tegra_hte_test_remove, |
| .driver = { |
| .name = "tegra_hte_test", |
| .of_match_table = tegra_hte_test_of_match, |
| }, |
| }; |
| module_platform_driver(tegra_hte_test_driver); |
| |
| MODULE_AUTHOR("Dipen Patel <dipenp@nvidia.com>"); |
| MODULE_LICENSE("GPL"); |