| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * PCI Express Precision Time Measurement |
| * Copyright (c) 2016, Intel Corporation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include "../pci.h" |
| |
| /* |
| * If the next upstream device supports PTM, return it; otherwise return |
| * NULL. PTM Messages are local, so both link partners must support it. |
| */ |
| static struct pci_dev *pci_upstream_ptm(struct pci_dev *dev) |
| { |
| struct pci_dev *ups = pci_upstream_bridge(dev); |
| |
| /* |
| * Switch Downstream Ports are not permitted to have a PTM |
| * capability; their PTM behavior is controlled by the Upstream |
| * Port (PCIe r5.0, sec 7.9.16), so if the upstream bridge is a |
| * Switch Downstream Port, look up one more level. |
| */ |
| if (ups && pci_pcie_type(ups) == PCI_EXP_TYPE_DOWNSTREAM) |
| ups = pci_upstream_bridge(ups); |
| |
| if (ups && ups->ptm_cap) |
| return ups; |
| |
| return NULL; |
| } |
| |
| /* |
| * Find the PTM Capability (if present) and extract the information we need |
| * to use it. |
| */ |
| void pci_ptm_init(struct pci_dev *dev) |
| { |
| u16 ptm; |
| u32 cap; |
| struct pci_dev *ups; |
| |
| if (!pci_is_pcie(dev)) |
| return; |
| |
| ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM); |
| if (!ptm) |
| return; |
| |
| dev->ptm_cap = ptm; |
| pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_PTM, sizeof(u32)); |
| |
| pci_read_config_dword(dev, ptm + PCI_PTM_CAP, &cap); |
| dev->ptm_granularity = (cap & PCI_PTM_GRANULARITY_MASK) >> 8; |
| |
| /* |
| * Per the spec recommendation (PCIe r6.0, sec 7.9.15.3), select the |
| * furthest upstream Time Source as the PTM Root. For Endpoints, |
| * "the Effective Granularity is the maximum Local Clock Granularity |
| * reported by the PTM Root and all intervening PTM Time Sources." |
| */ |
| ups = pci_upstream_ptm(dev); |
| if (ups) { |
| if (ups->ptm_granularity == 0) |
| dev->ptm_granularity = 0; |
| else if (ups->ptm_granularity > dev->ptm_granularity) |
| dev->ptm_granularity = ups->ptm_granularity; |
| } else if (cap & PCI_PTM_CAP_ROOT) { |
| dev->ptm_root = 1; |
| } else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) { |
| |
| /* |
| * Per sec 7.9.15.3, this should be the Local Clock |
| * Granularity of the associated Time Source. But it |
| * doesn't say how to find that Time Source. |
| */ |
| dev->ptm_granularity = 0; |
| } |
| |
| if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT || |
| pci_pcie_type(dev) == PCI_EXP_TYPE_UPSTREAM) |
| pci_enable_ptm(dev, NULL); |
| } |
| |
| void pci_save_ptm_state(struct pci_dev *dev) |
| { |
| u16 ptm = dev->ptm_cap; |
| struct pci_cap_saved_state *save_state; |
| u32 *cap; |
| |
| if (!ptm) |
| return; |
| |
| save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_PTM); |
| if (!save_state) |
| return; |
| |
| cap = (u32 *)&save_state->cap.data[0]; |
| pci_read_config_dword(dev, ptm + PCI_PTM_CTRL, cap); |
| } |
| |
| void pci_restore_ptm_state(struct pci_dev *dev) |
| { |
| u16 ptm = dev->ptm_cap; |
| struct pci_cap_saved_state *save_state; |
| u32 *cap; |
| |
| if (!ptm) |
| return; |
| |
| save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_PTM); |
| if (!save_state) |
| return; |
| |
| cap = (u32 *)&save_state->cap.data[0]; |
| pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, *cap); |
| } |
| |
| /* Enable PTM in the Control register if possible */ |
| static int __pci_enable_ptm(struct pci_dev *dev) |
| { |
| u16 ptm = dev->ptm_cap; |
| struct pci_dev *ups; |
| u32 ctrl; |
| |
| if (!ptm) |
| return -EINVAL; |
| |
| /* |
| * A device uses local PTM Messages to request time information |
| * from a PTM Root that's farther upstream. Every device along the |
| * path must support PTM and have it enabled so it can handle the |
| * messages. Therefore, if this device is not a PTM Root, the |
| * upstream link partner must have PTM enabled before we can enable |
| * PTM. |
| */ |
| if (!dev->ptm_root) { |
| ups = pci_upstream_ptm(dev); |
| if (!ups || !ups->ptm_enabled) |
| return -EINVAL; |
| } |
| |
| pci_read_config_dword(dev, ptm + PCI_PTM_CTRL, &ctrl); |
| |
| ctrl |= PCI_PTM_CTRL_ENABLE; |
| ctrl &= ~PCI_PTM_GRANULARITY_MASK; |
| ctrl |= dev->ptm_granularity << 8; |
| if (dev->ptm_root) |
| ctrl |= PCI_PTM_CTRL_ROOT; |
| |
| pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl); |
| return 0; |
| } |
| |
| /** |
| * pci_enable_ptm() - Enable Precision Time Measurement |
| * @dev: PCI device |
| * @granularity: pointer to return granularity |
| * |
| * Enable Precision Time Measurement for @dev. If successful and |
| * @granularity is non-NULL, return the Effective Granularity. |
| * |
| * Return: zero if successful, or -EINVAL if @dev lacks a PTM Capability or |
| * is not a PTM Root and lacks an upstream path of PTM-enabled devices. |
| */ |
| int pci_enable_ptm(struct pci_dev *dev, u8 *granularity) |
| { |
| int rc; |
| char clock_desc[8]; |
| |
| rc = __pci_enable_ptm(dev); |
| if (rc) |
| return rc; |
| |
| dev->ptm_enabled = 1; |
| |
| if (granularity) |
| *granularity = dev->ptm_granularity; |
| |
| switch (dev->ptm_granularity) { |
| case 0: |
| snprintf(clock_desc, sizeof(clock_desc), "unknown"); |
| break; |
| case 255: |
| snprintf(clock_desc, sizeof(clock_desc), ">254ns"); |
| break; |
| default: |
| snprintf(clock_desc, sizeof(clock_desc), "%uns", |
| dev->ptm_granularity); |
| break; |
| } |
| pci_info(dev, "PTM enabled%s, %s granularity\n", |
| dev->ptm_root ? " (root)" : "", clock_desc); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pci_enable_ptm); |
| |
| static void __pci_disable_ptm(struct pci_dev *dev) |
| { |
| u16 ptm = dev->ptm_cap; |
| u32 ctrl; |
| |
| if (!ptm) |
| return; |
| |
| pci_read_config_dword(dev, ptm + PCI_PTM_CTRL, &ctrl); |
| ctrl &= ~(PCI_PTM_CTRL_ENABLE | PCI_PTM_CTRL_ROOT); |
| pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl); |
| } |
| |
| /** |
| * pci_disable_ptm() - Disable Precision Time Measurement |
| * @dev: PCI device |
| * |
| * Disable Precision Time Measurement for @dev. |
| */ |
| void pci_disable_ptm(struct pci_dev *dev) |
| { |
| if (dev->ptm_enabled) { |
| __pci_disable_ptm(dev); |
| dev->ptm_enabled = 0; |
| } |
| } |
| EXPORT_SYMBOL(pci_disable_ptm); |
| |
| /* |
| * Disable PTM, but preserve dev->ptm_enabled so we silently re-enable it on |
| * resume if necessary. |
| */ |
| void pci_suspend_ptm(struct pci_dev *dev) |
| { |
| if (dev->ptm_enabled) |
| __pci_disable_ptm(dev); |
| } |
| |
| /* If PTM was enabled before suspend, re-enable it when resuming */ |
| void pci_resume_ptm(struct pci_dev *dev) |
| { |
| if (dev->ptm_enabled) |
| __pci_enable_ptm(dev); |
| } |
| |
| bool pcie_ptm_enabled(struct pci_dev *dev) |
| { |
| if (!dev) |
| return false; |
| |
| return dev->ptm_enabled; |
| } |
| EXPORT_SYMBOL(pcie_ptm_enabled); |