| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/regmap.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/clk-provider.h> |
| #include <linux/spinlock.h> |
| |
| #include "clk-regmap.h" |
| #include "clk-hfpll.h" |
| |
| #define PLL_OUTCTRL BIT(0) |
| #define PLL_BYPASSNL BIT(1) |
| #define PLL_RESET_N BIT(2) |
| |
| /* Initialize a HFPLL at a given rate and enable it. */ |
| static void __clk_hfpll_init_once(struct clk_hw *hw) |
| { |
| struct clk_hfpll *h = to_clk_hfpll(hw); |
| struct hfpll_data const *hd = h->d; |
| struct regmap *regmap = h->clkr.regmap; |
| |
| if (likely(h->init_done)) |
| return; |
| |
| /* Configure PLL parameters for integer mode. */ |
| if (hd->config_val) |
| regmap_write(regmap, hd->config_reg, hd->config_val); |
| regmap_write(regmap, hd->m_reg, 0); |
| regmap_write(regmap, hd->n_reg, 1); |
| |
| if (hd->user_reg) { |
| u32 regval = hd->user_val; |
| unsigned long rate; |
| |
| rate = clk_hw_get_rate(hw); |
| |
| /* Pick the right VCO. */ |
| if (hd->user_vco_mask && rate > hd->low_vco_max_rate) |
| regval |= hd->user_vco_mask; |
| regmap_write(regmap, hd->user_reg, regval); |
| } |
| |
| if (hd->droop_reg) |
| regmap_write(regmap, hd->droop_reg, hd->droop_val); |
| |
| h->init_done = true; |
| } |
| |
| static void __clk_hfpll_enable(struct clk_hw *hw) |
| { |
| struct clk_hfpll *h = to_clk_hfpll(hw); |
| struct hfpll_data const *hd = h->d; |
| struct regmap *regmap = h->clkr.regmap; |
| u32 val; |
| |
| __clk_hfpll_init_once(hw); |
| |
| /* Disable PLL bypass mode. */ |
| regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL); |
| |
| /* |
| * H/W requires a 5us delay between disabling the bypass and |
| * de-asserting the reset. Delay 10us just to be safe. |
| */ |
| udelay(10); |
| |
| /* De-assert active-low PLL reset. */ |
| regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N); |
| |
| /* Wait for PLL to lock. */ |
| if (hd->status_reg) |
| /* |
| * Busy wait. Should never timeout, we add a timeout to |
| * prevent any sort of stall. |
| */ |
| regmap_read_poll_timeout(regmap, hd->status_reg, val, |
| !(val & BIT(hd->lock_bit)), 0, |
| 100 * USEC_PER_MSEC); |
| else |
| udelay(60); |
| |
| /* Enable PLL output. */ |
| regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL); |
| } |
| |
| /* Enable an already-configured HFPLL. */ |
| static int clk_hfpll_enable(struct clk_hw *hw) |
| { |
| unsigned long flags; |
| struct clk_hfpll *h = to_clk_hfpll(hw); |
| struct hfpll_data const *hd = h->d; |
| struct regmap *regmap = h->clkr.regmap; |
| u32 mode; |
| |
| spin_lock_irqsave(&h->lock, flags); |
| regmap_read(regmap, hd->mode_reg, &mode); |
| if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL))) |
| __clk_hfpll_enable(hw); |
| spin_unlock_irqrestore(&h->lock, flags); |
| |
| return 0; |
| } |
| |
| static void __clk_hfpll_disable(struct clk_hfpll *h) |
| { |
| struct hfpll_data const *hd = h->d; |
| struct regmap *regmap = h->clkr.regmap; |
| |
| /* |
| * Disable the PLL output, disable test mode, enable the bypass mode, |
| * and assert the reset. |
| */ |
| regmap_update_bits(regmap, hd->mode_reg, |
| PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0); |
| } |
| |
| static void clk_hfpll_disable(struct clk_hw *hw) |
| { |
| struct clk_hfpll *h = to_clk_hfpll(hw); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&h->lock, flags); |
| __clk_hfpll_disable(h); |
| spin_unlock_irqrestore(&h->lock, flags); |
| } |
| |
| static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct clk_hfpll *h = to_clk_hfpll(hw); |
| struct hfpll_data const *hd = h->d; |
| unsigned long rrate; |
| |
| rate = clamp(rate, hd->min_rate, hd->max_rate); |
| |
| rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate; |
| if (rrate > hd->max_rate) |
| rrate -= *parent_rate; |
| |
| return rrate; |
| } |
| |
| /* |
| * For optimization reasons, assumes no downstream clocks are actively using |
| * it. |
| */ |
| static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_hfpll *h = to_clk_hfpll(hw); |
| struct hfpll_data const *hd = h->d; |
| struct regmap *regmap = h->clkr.regmap; |
| unsigned long flags; |
| u32 l_val, val; |
| bool enabled; |
| |
| l_val = rate / parent_rate; |
| |
| spin_lock_irqsave(&h->lock, flags); |
| |
| enabled = __clk_is_enabled(hw->clk); |
| if (enabled) |
| __clk_hfpll_disable(h); |
| |
| /* Pick the right VCO. */ |
| if (hd->user_reg && hd->user_vco_mask) { |
| regmap_read(regmap, hd->user_reg, &val); |
| if (rate <= hd->low_vco_max_rate) |
| val &= ~hd->user_vco_mask; |
| else |
| val |= hd->user_vco_mask; |
| regmap_write(regmap, hd->user_reg, val); |
| } |
| |
| regmap_write(regmap, hd->l_reg, l_val); |
| |
| if (enabled) |
| __clk_hfpll_enable(hw); |
| |
| spin_unlock_irqrestore(&h->lock, flags); |
| |
| return 0; |
| } |
| |
| static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_hfpll *h = to_clk_hfpll(hw); |
| struct hfpll_data const *hd = h->d; |
| struct regmap *regmap = h->clkr.regmap; |
| u32 l_val; |
| |
| regmap_read(regmap, hd->l_reg, &l_val); |
| |
| return l_val * parent_rate; |
| } |
| |
| static int clk_hfpll_init(struct clk_hw *hw) |
| { |
| struct clk_hfpll *h = to_clk_hfpll(hw); |
| struct hfpll_data const *hd = h->d; |
| struct regmap *regmap = h->clkr.regmap; |
| u32 mode, status; |
| |
| regmap_read(regmap, hd->mode_reg, &mode); |
| if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) { |
| __clk_hfpll_init_once(hw); |
| return 0; |
| } |
| |
| if (hd->status_reg) { |
| regmap_read(regmap, hd->status_reg, &status); |
| if (!(status & BIT(hd->lock_bit))) { |
| WARN(1, "HFPLL %s is ON, but not locked!\n", |
| __clk_get_name(hw->clk)); |
| clk_hfpll_disable(hw); |
| __clk_hfpll_init_once(hw); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int hfpll_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_hfpll *h = to_clk_hfpll(hw); |
| struct hfpll_data const *hd = h->d; |
| struct regmap *regmap = h->clkr.regmap; |
| u32 mode; |
| |
| regmap_read(regmap, hd->mode_reg, &mode); |
| mode &= 0x7; |
| return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL); |
| } |
| |
| const struct clk_ops clk_ops_hfpll = { |
| .enable = clk_hfpll_enable, |
| .disable = clk_hfpll_disable, |
| .is_enabled = hfpll_is_enabled, |
| .round_rate = clk_hfpll_round_rate, |
| .set_rate = clk_hfpll_set_rate, |
| .recalc_rate = clk_hfpll_recalc_rate, |
| .init = clk_hfpll_init, |
| }; |
| EXPORT_SYMBOL_GPL(clk_ops_hfpll); |