| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018 Amarula Solutions |
| * Author: Jagan Teki <jagan@amarulasolutions.com> |
| */ |
| |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define FEIYANG_INIT_CMD_LEN 2 |
| |
| struct feiyang { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi; |
| |
| struct regulator *dvdd; |
| struct regulator *avdd; |
| struct gpio_desc *reset; |
| }; |
| |
| static inline struct feiyang *panel_to_feiyang(struct drm_panel *panel) |
| { |
| return container_of(panel, struct feiyang, panel); |
| } |
| |
| struct feiyang_init_cmd { |
| u8 data[FEIYANG_INIT_CMD_LEN]; |
| }; |
| |
| static const struct feiyang_init_cmd feiyang_init_cmds[] = { |
| { .data = { 0x80, 0x58 } }, |
| { .data = { 0x81, 0x47 } }, |
| { .data = { 0x82, 0xD4 } }, |
| { .data = { 0x83, 0x88 } }, |
| { .data = { 0x84, 0xA9 } }, |
| { .data = { 0x85, 0xC3 } }, |
| { .data = { 0x86, 0x82 } }, |
| }; |
| |
| static int feiyang_prepare(struct drm_panel *panel) |
| { |
| struct feiyang *ctx = panel_to_feiyang(panel); |
| struct mipi_dsi_device *dsi = ctx->dsi; |
| unsigned int i; |
| int ret; |
| |
| ret = regulator_enable(ctx->dvdd); |
| if (ret) |
| return ret; |
| |
| /* T1 (dvdd start + dvdd rise) 0 < T1 <= 10ms */ |
| msleep(10); |
| |
| ret = regulator_enable(ctx->avdd); |
| if (ret) |
| return ret; |
| |
| /* T3 (dvdd rise + avdd start + avdd rise) T3 >= 20ms */ |
| msleep(20); |
| |
| gpiod_set_value(ctx->reset, 0); |
| |
| /* |
| * T5 + T6 (avdd rise + video & logic signal rise) |
| * T5 >= 10ms, 0 < T6 <= 10ms |
| */ |
| msleep(20); |
| |
| gpiod_set_value(ctx->reset, 1); |
| |
| /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ |
| msleep(200); |
| |
| for (i = 0; i < ARRAY_SIZE(feiyang_init_cmds); i++) { |
| const struct feiyang_init_cmd *cmd = |
| &feiyang_init_cmds[i]; |
| |
| ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data, |
| FEIYANG_INIT_CMD_LEN); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int feiyang_enable(struct drm_panel *panel) |
| { |
| struct feiyang *ctx = panel_to_feiyang(panel); |
| |
| /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ |
| msleep(200); |
| |
| mipi_dsi_dcs_set_display_on(ctx->dsi); |
| |
| return 0; |
| } |
| |
| static int feiyang_disable(struct drm_panel *panel) |
| { |
| struct feiyang *ctx = panel_to_feiyang(panel); |
| |
| return mipi_dsi_dcs_set_display_off(ctx->dsi); |
| } |
| |
| static int feiyang_unprepare(struct drm_panel *panel) |
| { |
| struct feiyang *ctx = panel_to_feiyang(panel); |
| int ret; |
| |
| ret = mipi_dsi_dcs_set_display_off(ctx->dsi); |
| if (ret < 0) |
| dev_err(panel->dev, "failed to set display off: %d\n", ret); |
| |
| ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); |
| if (ret < 0) |
| dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret); |
| |
| /* T13 (backlight fall + video & logic signal fall) T13 >= 200ms */ |
| msleep(200); |
| |
| gpiod_set_value(ctx->reset, 0); |
| |
| regulator_disable(ctx->avdd); |
| |
| /* T11 (dvdd rise to fall) 0 < T11 <= 10ms */ |
| msleep(10); |
| |
| regulator_disable(ctx->dvdd); |
| |
| return 0; |
| } |
| |
| static const struct drm_display_mode feiyang_default_mode = { |
| .clock = 55000, |
| |
| .hdisplay = 1024, |
| .hsync_start = 1024 + 310, |
| .hsync_end = 1024 + 310 + 20, |
| .htotal = 1024 + 310 + 20 + 90, |
| |
| .vdisplay = 600, |
| .vsync_start = 600 + 12, |
| .vsync_end = 600 + 12 + 2, |
| .vtotal = 600 + 12 + 2 + 21, |
| |
| .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, |
| }; |
| |
| static int feiyang_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct feiyang *ctx = panel_to_feiyang(panel); |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(connector->dev, &feiyang_default_mode); |
| if (!mode) { |
| dev_err(&ctx->dsi->dev, "failed to add mode %ux%u@%u\n", |
| feiyang_default_mode.hdisplay, |
| feiyang_default_mode.vdisplay, |
| drm_mode_vrefresh(&feiyang_default_mode)); |
| return -ENOMEM; |
| } |
| |
| drm_mode_set_name(mode); |
| |
| drm_mode_probed_add(connector, mode); |
| |
| return 1; |
| } |
| |
| static const struct drm_panel_funcs feiyang_funcs = { |
| .disable = feiyang_disable, |
| .unprepare = feiyang_unprepare, |
| .prepare = feiyang_prepare, |
| .enable = feiyang_enable, |
| .get_modes = feiyang_get_modes, |
| }; |
| |
| static int feiyang_dsi_probe(struct mipi_dsi_device *dsi) |
| { |
| struct feiyang *ctx; |
| int ret; |
| |
| ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| mipi_dsi_set_drvdata(dsi, ctx); |
| ctx->dsi = dsi; |
| |
| drm_panel_init(&ctx->panel, &dsi->dev, &feiyang_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| |
| ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd"); |
| if (IS_ERR(ctx->dvdd)) |
| return dev_err_probe(&dsi->dev, PTR_ERR(ctx->dvdd), |
| "Couldn't get dvdd regulator\n"); |
| |
| ctx->avdd = devm_regulator_get(&dsi->dev, "avdd"); |
| if (IS_ERR(ctx->avdd)) |
| return dev_err_probe(&dsi->dev, PTR_ERR(ctx->avdd), |
| "Couldn't get avdd regulator\n"); |
| |
| ctx->reset = devm_gpiod_get_optional(&dsi->dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(ctx->reset)) |
| return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset), |
| "Couldn't get our reset GPIO\n"); |
| |
| ret = drm_panel_of_backlight(&ctx->panel); |
| if (ret) |
| return ret; |
| |
| drm_panel_add(&ctx->panel); |
| |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->lanes = 4; |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) { |
| drm_panel_remove(&ctx->panel); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void feiyang_dsi_remove(struct mipi_dsi_device *dsi) |
| { |
| struct feiyang *ctx = mipi_dsi_get_drvdata(dsi); |
| |
| mipi_dsi_detach(dsi); |
| drm_panel_remove(&ctx->panel); |
| } |
| |
| static const struct of_device_id feiyang_of_match[] = { |
| { .compatible = "feiyang,fy07024di26a30d", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, feiyang_of_match); |
| |
| static struct mipi_dsi_driver feiyang_driver = { |
| .probe = feiyang_dsi_probe, |
| .remove = feiyang_dsi_remove, |
| .driver = { |
| .name = "feiyang-fy07024di26a30d", |
| .of_match_table = feiyang_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(feiyang_driver); |
| |
| MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); |
| MODULE_DESCRIPTION("Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"); |
| MODULE_LICENSE("GPL"); |