| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Generic Syscon LEDs Driver |
| * |
| * Copyright (c) 2014, Linaro Limited |
| * Author: Linus Walleij <linus.walleij@linaro.org> |
| */ |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/of_device.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/stat.h> |
| #include <linux/slab.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| #include <linux/leds.h> |
| |
| /** |
| * struct syscon_led - state container for syscon based LEDs |
| * @cdev: LED class device for this LED |
| * @map: regmap to access the syscon device backing this LED |
| * @offset: the offset into the syscon regmap for the LED register |
| * @mask: the bit in the register corresponding to the LED |
| * @state: current state of the LED |
| */ |
| struct syscon_led { |
| struct led_classdev cdev; |
| struct regmap *map; |
| u32 offset; |
| u32 mask; |
| bool state; |
| }; |
| |
| static void syscon_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct syscon_led *sled = |
| container_of(led_cdev, struct syscon_led, cdev); |
| u32 val; |
| int ret; |
| |
| if (value == LED_OFF) { |
| val = 0; |
| sled->state = false; |
| } else { |
| val = sled->mask; |
| sled->state = true; |
| } |
| |
| ret = regmap_update_bits(sled->map, sled->offset, sled->mask, val); |
| if (ret < 0) |
| dev_err(sled->cdev.dev, "error updating LED status\n"); |
| } |
| |
| static int syscon_led_probe(struct platform_device *pdev) |
| { |
| struct led_init_data init_data = {}; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev_of_node(dev); |
| struct device *parent; |
| struct regmap *map; |
| struct syscon_led *sled; |
| enum led_default_state state; |
| u32 value; |
| int ret; |
| |
| parent = dev->parent; |
| if (!parent) { |
| dev_err(dev, "no parent for syscon LED\n"); |
| return -ENODEV; |
| } |
| map = syscon_node_to_regmap(dev_of_node(parent)); |
| if (IS_ERR(map)) { |
| dev_err(dev, "no regmap for syscon LED parent\n"); |
| return PTR_ERR(map); |
| } |
| |
| sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL); |
| if (!sled) |
| return -ENOMEM; |
| |
| sled->map = map; |
| |
| if (of_property_read_u32(np, "offset", &sled->offset)) |
| return -EINVAL; |
| if (of_property_read_u32(np, "mask", &sled->mask)) |
| return -EINVAL; |
| |
| init_data.fwnode = of_fwnode_handle(np); |
| |
| state = led_init_default_state_get(init_data.fwnode); |
| switch (state) { |
| case LEDS_DEFSTATE_ON: |
| ret = regmap_update_bits(map, sled->offset, sled->mask, sled->mask); |
| if (ret < 0) |
| return ret; |
| sled->state = true; |
| break; |
| case LEDS_DEFSTATE_KEEP: |
| ret = regmap_read(map, sled->offset, &value); |
| if (ret < 0) |
| return ret; |
| sled->state = !!(value & sled->mask); |
| break; |
| default: |
| ret = regmap_update_bits(map, sled->offset, sled->mask, 0); |
| if (ret < 0) |
| return ret; |
| sled->state = false; |
| } |
| sled->cdev.brightness_set = syscon_led_set; |
| |
| ret = devm_led_classdev_register_ext(dev, &sled->cdev, &init_data); |
| if (ret < 0) |
| return ret; |
| |
| platform_set_drvdata(pdev, sled); |
| dev_info(dev, "registered LED %s\n", sled->cdev.name); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id of_syscon_leds_match[] = { |
| { .compatible = "register-bit-led", }, |
| {}, |
| }; |
| |
| static struct platform_driver syscon_led_driver = { |
| .probe = syscon_led_probe, |
| .driver = { |
| .name = "leds-syscon", |
| .of_match_table = of_syscon_leds_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| builtin_platform_driver(syscon_led_driver); |