|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Clkout driver for Rockchip RK808 | 
|  | * | 
|  | * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd | 
|  | * | 
|  | * Author:Chris Zhong <zyw@rock-chips.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/clk-provider.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mfd/rk808.h> | 
|  |  | 
|  | struct rk808_clkout { | 
|  | struct regmap		*regmap; | 
|  | struct clk_hw		clkout1_hw; | 
|  | struct clk_hw		clkout2_hw; | 
|  | }; | 
|  |  | 
|  | static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw, | 
|  | unsigned long parent_rate) | 
|  | { | 
|  | return 32768; | 
|  | } | 
|  |  | 
|  | static int rk808_clkout2_enable(struct clk_hw *hw, bool enable) | 
|  | { | 
|  | struct rk808_clkout *rk808_clkout = container_of(hw, | 
|  | struct rk808_clkout, | 
|  | clkout2_hw); | 
|  |  | 
|  | return regmap_update_bits(rk808_clkout->regmap, RK808_CLK32OUT_REG, | 
|  | CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0); | 
|  | } | 
|  |  | 
|  | static int rk808_clkout2_prepare(struct clk_hw *hw) | 
|  | { | 
|  | return rk808_clkout2_enable(hw, true); | 
|  | } | 
|  |  | 
|  | static void rk808_clkout2_unprepare(struct clk_hw *hw) | 
|  | { | 
|  | rk808_clkout2_enable(hw, false); | 
|  | } | 
|  |  | 
|  | static int rk808_clkout2_is_prepared(struct clk_hw *hw) | 
|  | { | 
|  | struct rk808_clkout *rk808_clkout = container_of(hw, | 
|  | struct rk808_clkout, | 
|  | clkout2_hw); | 
|  | uint32_t val; | 
|  |  | 
|  | int ret = regmap_read(rk808_clkout->regmap, RK808_CLK32OUT_REG, &val); | 
|  |  | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return (val & CLK32KOUT2_EN) ? 1 : 0; | 
|  | } | 
|  |  | 
|  | static const struct clk_ops rk808_clkout1_ops = { | 
|  | .recalc_rate = rk808_clkout_recalc_rate, | 
|  | }; | 
|  |  | 
|  | static const struct clk_ops rk808_clkout2_ops = { | 
|  | .prepare = rk808_clkout2_prepare, | 
|  | .unprepare = rk808_clkout2_unprepare, | 
|  | .is_prepared = rk808_clkout2_is_prepared, | 
|  | .recalc_rate = rk808_clkout_recalc_rate, | 
|  | }; | 
|  |  | 
|  | static struct clk_hw * | 
|  | of_clk_rk808_get(struct of_phandle_args *clkspec, void *data) | 
|  | { | 
|  | struct rk808_clkout *rk808_clkout = data; | 
|  | unsigned int idx = clkspec->args[0]; | 
|  |  | 
|  | if (idx >= 2) { | 
|  | pr_err("%s: invalid index %u\n", __func__, idx); | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | return idx ? &rk808_clkout->clkout2_hw : &rk808_clkout->clkout1_hw; | 
|  | } | 
|  |  | 
|  | static int rk817_clkout2_enable(struct clk_hw *hw, bool enable) | 
|  | { | 
|  | struct rk808_clkout *rk808_clkout = container_of(hw, | 
|  | struct rk808_clkout, | 
|  | clkout2_hw); | 
|  |  | 
|  | return regmap_update_bits(rk808_clkout->regmap, RK817_SYS_CFG(1), | 
|  | RK817_CLK32KOUT2_EN, | 
|  | enable ? RK817_CLK32KOUT2_EN : 0); | 
|  | } | 
|  |  | 
|  | static int rk817_clkout2_prepare(struct clk_hw *hw) | 
|  | { | 
|  | return rk817_clkout2_enable(hw, true); | 
|  | } | 
|  |  | 
|  | static void rk817_clkout2_unprepare(struct clk_hw *hw) | 
|  | { | 
|  | rk817_clkout2_enable(hw, false); | 
|  | } | 
|  |  | 
|  | static int rk817_clkout2_is_prepared(struct clk_hw *hw) | 
|  | { | 
|  | struct rk808_clkout *rk808_clkout = container_of(hw, | 
|  | struct rk808_clkout, | 
|  | clkout2_hw); | 
|  | unsigned int val; | 
|  |  | 
|  | int ret = regmap_read(rk808_clkout->regmap, RK817_SYS_CFG(1), &val); | 
|  |  | 
|  | if (ret < 0) | 
|  | return 0; | 
|  |  | 
|  | return (val & RK817_CLK32KOUT2_EN) ? 1 : 0; | 
|  | } | 
|  |  | 
|  | static const struct clk_ops rk817_clkout2_ops = { | 
|  | .prepare = rk817_clkout2_prepare, | 
|  | .unprepare = rk817_clkout2_unprepare, | 
|  | .is_prepared = rk817_clkout2_is_prepared, | 
|  | .recalc_rate = rk808_clkout_recalc_rate, | 
|  | }; | 
|  |  | 
|  | static const struct clk_ops *rkpmic_get_ops(long variant) | 
|  | { | 
|  | switch (variant) { | 
|  | case RK809_ID: | 
|  | case RK817_ID: | 
|  | return &rk817_clkout2_ops; | 
|  | /* | 
|  | * For the default case, it match the following PMIC type. | 
|  | * RK805_ID | 
|  | * RK808_ID | 
|  | * RK818_ID | 
|  | */ | 
|  | default: | 
|  | return &rk808_clkout2_ops; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int rk808_clkout_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); | 
|  | struct device *dev = &pdev->dev; | 
|  | struct clk_init_data init = {}; | 
|  | struct rk808_clkout *rk808_clkout; | 
|  | int ret; | 
|  |  | 
|  | dev->of_node = pdev->dev.parent->of_node; | 
|  |  | 
|  | rk808_clkout = devm_kzalloc(dev, | 
|  | sizeof(*rk808_clkout), GFP_KERNEL); | 
|  | if (!rk808_clkout) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rk808_clkout->regmap = dev_get_regmap(pdev->dev.parent, NULL); | 
|  | if (!rk808_clkout->regmap) | 
|  | return -ENODEV; | 
|  |  | 
|  | init.parent_names = NULL; | 
|  | init.num_parents = 0; | 
|  | init.name = "rk808-clkout1"; | 
|  | init.ops = &rk808_clkout1_ops; | 
|  | rk808_clkout->clkout1_hw.init = &init; | 
|  |  | 
|  | /* optional override of the clockname */ | 
|  | of_property_read_string_index(dev->of_node, "clock-output-names", | 
|  | 0, &init.name); | 
|  |  | 
|  | ret = devm_clk_hw_register(dev, &rk808_clkout->clkout1_hw); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | init.name = "rk808-clkout2"; | 
|  | init.ops = rkpmic_get_ops(rk808->variant); | 
|  | rk808_clkout->clkout2_hw.init = &init; | 
|  |  | 
|  | /* optional override of the clockname */ | 
|  | of_property_read_string_index(dev->of_node, "clock-output-names", | 
|  | 1, &init.name); | 
|  |  | 
|  | ret = devm_clk_hw_register(dev, &rk808_clkout->clkout2_hw); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return devm_of_clk_add_hw_provider(&pdev->dev, of_clk_rk808_get, | 
|  | rk808_clkout); | 
|  | } | 
|  |  | 
|  | static struct platform_driver rk808_clkout_driver = { | 
|  | .probe = rk808_clkout_probe, | 
|  | .driver		= { | 
|  | .name	= "rk808-clkout", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(rk808_clkout_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Clkout driver for the rk808 series PMICs"); | 
|  | MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:rk808-clkout"); |