|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | // | 
|  | // SY8824C/SY8824E regulator driver | 
|  | // | 
|  | // Copyright (C) 2019 Synaptics Incorporated | 
|  | // | 
|  | // Author: Jisheng Zhang <jszhang@kernel.org> | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/regulator/driver.h> | 
|  | #include <linux/regulator/of_regulator.h> | 
|  |  | 
|  | #define SY8824C_BUCK_EN		(1 << 7) | 
|  | #define SY8824C_MODE		(1 << 6) | 
|  |  | 
|  | struct sy8824_config { | 
|  | /* registers */ | 
|  | unsigned int vol_reg; | 
|  | unsigned int mode_reg; | 
|  | unsigned int enable_reg; | 
|  | /* Voltage range and step(linear) */ | 
|  | unsigned int vsel_min; | 
|  | unsigned int vsel_step; | 
|  | unsigned int vsel_count; | 
|  | const struct regmap_config *config; | 
|  | }; | 
|  |  | 
|  | struct sy8824_device_info { | 
|  | struct device *dev; | 
|  | struct regulator_desc desc; | 
|  | struct regulator_init_data *regulator; | 
|  | const struct sy8824_config *cfg; | 
|  | }; | 
|  |  | 
|  | static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode) | 
|  | { | 
|  | struct sy8824_device_info *di = rdev_get_drvdata(rdev); | 
|  | const struct sy8824_config *cfg = di->cfg; | 
|  |  | 
|  | switch (mode) { | 
|  | case REGULATOR_MODE_FAST: | 
|  | regmap_update_bits(rdev->regmap, cfg->mode_reg, | 
|  | SY8824C_MODE, SY8824C_MODE); | 
|  | break; | 
|  | case REGULATOR_MODE_NORMAL: | 
|  | regmap_update_bits(rdev->regmap, cfg->mode_reg, | 
|  | SY8824C_MODE, 0); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static unsigned int sy8824_get_mode(struct regulator_dev *rdev) | 
|  | { | 
|  | struct sy8824_device_info *di = rdev_get_drvdata(rdev); | 
|  | const struct sy8824_config *cfg = di->cfg; | 
|  | u32 val; | 
|  | int ret = 0; | 
|  |  | 
|  | ret = regmap_read(rdev->regmap, cfg->mode_reg, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if (val & SY8824C_MODE) | 
|  | return REGULATOR_MODE_FAST; | 
|  | else | 
|  | return REGULATOR_MODE_NORMAL; | 
|  | } | 
|  |  | 
|  | static const struct regulator_ops sy8824_regulator_ops = { | 
|  | .set_voltage_sel = regulator_set_voltage_sel_regmap, | 
|  | .get_voltage_sel = regulator_get_voltage_sel_regmap, | 
|  | .set_voltage_time_sel = regulator_set_voltage_time_sel, | 
|  | .map_voltage = regulator_map_voltage_linear, | 
|  | .list_voltage = regulator_list_voltage_linear, | 
|  | .enable = regulator_enable_regmap, | 
|  | .disable = regulator_disable_regmap, | 
|  | .is_enabled = regulator_is_enabled_regmap, | 
|  | .set_mode = sy8824_set_mode, | 
|  | .get_mode = sy8824_get_mode, | 
|  | }; | 
|  |  | 
|  | static int sy8824_regulator_register(struct sy8824_device_info *di, | 
|  | struct regulator_config *config) | 
|  | { | 
|  | struct regulator_desc *rdesc = &di->desc; | 
|  | const struct sy8824_config *cfg = di->cfg; | 
|  | struct regulator_dev *rdev; | 
|  |  | 
|  | rdesc->name = "sy8824-reg"; | 
|  | rdesc->supply_name = "vin"; | 
|  | rdesc->ops = &sy8824_regulator_ops; | 
|  | rdesc->type = REGULATOR_VOLTAGE; | 
|  | rdesc->n_voltages = cfg->vsel_count; | 
|  | rdesc->enable_reg = cfg->enable_reg; | 
|  | rdesc->enable_mask = SY8824C_BUCK_EN; | 
|  | rdesc->min_uV = cfg->vsel_min; | 
|  | rdesc->uV_step = cfg->vsel_step; | 
|  | rdesc->vsel_reg = cfg->vol_reg; | 
|  | rdesc->vsel_mask = cfg->vsel_count - 1; | 
|  | rdesc->owner = THIS_MODULE; | 
|  |  | 
|  | rdev = devm_regulator_register(di->dev, &di->desc, config); | 
|  | return PTR_ERR_OR_ZERO(rdev); | 
|  | } | 
|  |  | 
|  | static const struct regmap_config sy8824_regmap_config = { | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .num_reg_defaults_raw = 1, | 
|  | .cache_type = REGCACHE_FLAT, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config sy20276_regmap_config = { | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .num_reg_defaults_raw = 2, | 
|  | .cache_type = REGCACHE_FLAT, | 
|  | }; | 
|  |  | 
|  | static int sy8824_i2c_probe(struct i2c_client *client) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | struct device_node *np = dev->of_node; | 
|  | struct sy8824_device_info *di; | 
|  | struct regulator_config config = { }; | 
|  | struct regmap *regmap; | 
|  | int ret; | 
|  |  | 
|  | di = devm_kzalloc(dev, sizeof(struct sy8824_device_info), GFP_KERNEL); | 
|  | if (!di) | 
|  | return -ENOMEM; | 
|  |  | 
|  | di->regulator = of_get_regulator_init_data(dev, np, &di->desc); | 
|  | if (!di->regulator) { | 
|  | dev_err(dev, "Platform data not found!\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | di->dev = dev; | 
|  | di->cfg = i2c_get_match_data(client); | 
|  |  | 
|  | regmap = devm_regmap_init_i2c(client, di->cfg->config); | 
|  | if (IS_ERR(regmap)) { | 
|  | dev_err(dev, "Failed to allocate regmap!\n"); | 
|  | return PTR_ERR(regmap); | 
|  | } | 
|  | i2c_set_clientdata(client, di); | 
|  |  | 
|  | config.dev = di->dev; | 
|  | config.init_data = di->regulator; | 
|  | config.regmap = regmap; | 
|  | config.driver_data = di; | 
|  | config.of_node = np; | 
|  |  | 
|  | ret = sy8824_regulator_register(di, &config); | 
|  | if (ret < 0) | 
|  | dev_err(dev, "Failed to register regulator!\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct sy8824_config sy8824c_cfg = { | 
|  | .vol_reg = 0x00, | 
|  | .mode_reg = 0x00, | 
|  | .enable_reg = 0x00, | 
|  | .vsel_min = 762500, | 
|  | .vsel_step = 12500, | 
|  | .vsel_count = 64, | 
|  | .config = &sy8824_regmap_config, | 
|  | }; | 
|  |  | 
|  | static const struct sy8824_config sy8824e_cfg = { | 
|  | .vol_reg = 0x00, | 
|  | .mode_reg = 0x00, | 
|  | .enable_reg = 0x00, | 
|  | .vsel_min = 700000, | 
|  | .vsel_step = 12500, | 
|  | .vsel_count = 64, | 
|  | .config = &sy8824_regmap_config, | 
|  | }; | 
|  |  | 
|  | static const struct sy8824_config sy20276_cfg = { | 
|  | .vol_reg = 0x00, | 
|  | .mode_reg = 0x01, | 
|  | .enable_reg = 0x01, | 
|  | .vsel_min = 600000, | 
|  | .vsel_step = 10000, | 
|  | .vsel_count = 128, | 
|  | .config = &sy20276_regmap_config, | 
|  | }; | 
|  |  | 
|  | static const struct sy8824_config sy20278_cfg = { | 
|  | .vol_reg = 0x00, | 
|  | .mode_reg = 0x01, | 
|  | .enable_reg = 0x01, | 
|  | .vsel_min = 762500, | 
|  | .vsel_step = 12500, | 
|  | .vsel_count = 64, | 
|  | .config = &sy20276_regmap_config, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id sy8824_dt_ids[] = { | 
|  | { .compatible = "silergy,sy8824c", .data = &sy8824c_cfg }, | 
|  | { .compatible = "silergy,sy8824e", .data = &sy8824e_cfg }, | 
|  | { .compatible = "silergy,sy20276", .data = &sy20276_cfg }, | 
|  | { .compatible = "silergy,sy20278", .data = &sy20278_cfg }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, sy8824_dt_ids); | 
|  |  | 
|  | static const struct i2c_device_id sy8824_id[] = { | 
|  | { "sy8824", (kernel_ulong_t)&sy8824c_cfg }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, sy8824_id); | 
|  |  | 
|  | static struct i2c_driver sy8824_regulator_driver = { | 
|  | .driver = { | 
|  | .name = "sy8824-regulator", | 
|  | .probe_type = PROBE_PREFER_ASYNCHRONOUS, | 
|  | .of_match_table = sy8824_dt_ids, | 
|  | }, | 
|  | .probe = sy8824_i2c_probe, | 
|  | .id_table = sy8824_id, | 
|  | }; | 
|  | module_i2c_driver(sy8824_regulator_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>"); | 
|  | MODULE_DESCRIPTION("SY8824C/SY8824E regulator driver"); | 
|  | MODULE_LICENSE("GPL v2"); |