blob: 15431077f00cde43c16ab3c464152e5a32841e69 [file] [log] [blame] [edit]
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include "arm-realview-eb.dtsi"
/ {
model = "ARM RealView Emulation Baseboard";
compatible = "arm,realview-eb";
arm,hbi = <0x140>;
/*
* This is the core tile with the CPU and GIC etc for the
* ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
* or PMU.
*
* To run this machine with QEMU, specify the following:
* qemu-system-arm -M realview-eb
* Unless specified, QEMU will emulate an ARM926EJ-S core tile.
* Switches -cpu arm1136 or -cpu arm1176 emulates the other
* core tiles.
*/
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,realview-eb-soc", "simple-bus";
regmap = <&syscon>;
ranges;
intc: interrupt-controller@10040000 {
compatible = "arm,pl390";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0x10041000 0x1000>,
<0x10040000 0x100>;
};
};
};
/*
* This adapts all the peripherals to the interrupt routing
* to the GIC on the core tile.
*/
&ethernet {
interrupt-parent = <&intc>;
interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
};
&usb {
interrupt-parent = <&intc>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
};
&aaci {
interrupt-parent = <&intc>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
};
&mmc {
interrupt-parent = <&intc>;
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
<0 18 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi0 {
interrupt-parent = <&intc>;
interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi1 {
interrupt-parent = <&intc>;
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
};
&charlcd {
interrupt-parent = <&intc>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
};
&serial0 {
interrupt-parent = <&intc>;
interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
};
&serial1 {
interrupt-parent = <&intc>;
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
};
&serial2 {
interrupt-parent = <&intc>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
};
&serial3 {
interrupt-parent = <&intc>;
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
};
&ssp {
interrupt-parent = <&intc>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
};
&wdog {
interrupt-parent = <&intc>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
};
&timer01 {
interrupt-parent = <&intc>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
};
&timer23 {
interrupt-parent = <&intc>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio0 {
interrupt-parent = <&intc>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio1 {
interrupt-parent = <&intc>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio2 {
interrupt-parent = <&intc>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
};
&rtc {
interrupt-parent = <&intc>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
};
&clcd {
interrupt-parent = <&intc>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
};