| /* |
| * Support for CompuLab CL-SOM-iMX7 System-on-Module |
| * |
| * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ |
| * Author: Ilya Ledvich <ilya@compulab.co.il> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| */ |
| |
| /dts-v1/; |
| |
| #include "imx7d.dtsi" |
| |
| / { |
| model = "CompuLab CL-SOM-iMX7"; |
| compatible = "compulab,cl-som-imx7", "fsl,imx7d"; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ |
| }; |
| |
| reg_usb_otg1_vbus: regulator-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| |
| &cpu0 { |
| cpu-supply = <&sw1a_reg>; |
| }; |
| |
| &cpu1 { |
| cpu-supply = <&sw1a_reg>; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, |
| <&clks IMX7D_ENET1_TIME_ROOT_CLK>; |
| assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| assigned-clock-rates = <0>, <100000000>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| }; |
| |
| ethphy1: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, |
| <&clks IMX7D_ENET2_TIME_ROOT_CLK>; |
| assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| assigned-clock-rates = <0>, <100000000>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy1>; |
| fsl,magic-packet; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| pmic: pmic@8 { |
| compatible = "fsl,pfuze3000"; |
| reg = <0x8>; |
| |
| regulators { |
| sw1a_reg: sw1a { |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| /* use sw1c_reg to align with pfuze100/pfuze200 */ |
| sw1c_reg: sw1b { |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1475000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1850000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1650000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vldo1 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vldo2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vccsd { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: v33 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vldo3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vldo4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| pca9555: pca9555@20 { |
| compatible = "nxp,pca9555"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x20>; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c08"; |
| reg = <0x50>; |
| pagesize = <16>; |
| }; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; |
| assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1>; |
| vbus-supply = <®_usb_otg1_vbus>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; |
| assigned-clock-rates = <400000000>; |
| bus-width = <8>; |
| fsl,tuning-step = <2>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x30 |
| MX7D_PAD_SD2_WP__ENET1_MDC 0x30 |
| MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x11 |
| MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x11 |
| MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x11 |
| MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x11 |
| MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x11 |
| MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x11 |
| MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x11 |
| MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11 |
| MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11 |
| MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11 |
| MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x11 |
| MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x11 |
| MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x11 |
| MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x11 |
| MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x11 |
| MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x11 |
| MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x11 |
| MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x11 |
| MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x11 |
| MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x11 |
| MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x11 |
| MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x11 |
| MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x11 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f |
| MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 |
| MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x59 |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x19 |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 |
| >; |
| }; |
| }; |
| |
| &iomuxc_lpsr { |
| pinctrl_usbotg1: usbotg1grp { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ |
| >; |
| }; |
| }; |
