| // SPDX-License-Identifier: GPL-2.0 OR X11 |
| /* |
| * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board. |
| * |
| * Copyright (C) 2016 TQ-Systems GmbH |
| * Author: Markus Niebel <Markus.Niebel@tq-group.com> |
| * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "imx7d-tqma7.dtsi" |
| #include "imx7-mba7.dtsi" |
| |
| / { |
| model = "TQ-Systems TQMa7D board on MBa7 carrier board"; |
| compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d"; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| phy-mode = "rgmii-id"; |
| phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; |
| phy-reset-duration = <1>; |
| phy-supply = <®_fec2_pwdn>; |
| phy-handle = <ðphy2_0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy2_0: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; |
| ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; |
| }; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog_mba7_1>; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x02 |
| MX7D_PAD_SD2_WP__ENET2_MDC 0x00 |
| MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x71 |
| MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x71 |
| MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x71 |
| MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x71 |
| MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x71 |
| MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x71 |
| MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x79 |
| MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x79 |
| MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x79 |
| MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x79 |
| MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x79 |
| MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x79 |
| /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */ |
| MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x40000070 |
| /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */ |
| MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x40000078 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| /* #pcie_wake */ |
| MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x70 |
| /* #pcie_rst */ |
| MX7D_PAD_SD2_CLK__GPIO5_IO12 0x70 |
| /* #pcie_dis */ |
| MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x70 |
| >; |
| }; |
| }; |
| |
| &iomuxc_lpsr { |
| pinctrl_usbotg2: usbotg2grp { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c |
| MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 |
| >; |
| }; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| /* 1.5V logically from 3.3V */ |
| /* probe deferral not supported */ |
| /* pcie-bus-supply = <®_mpcie_1v5>; */ |
| reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg2>; |
| vbus-supply = <®_usb_otg2_vbus>; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
