| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> |
| */ |
| |
| /dts-v1/; |
| |
| #include "qcom-msm8226.dtsi" |
| #include "qcom-pm8226.dtsi" |
| |
| /delete-node/ &adsp_region; |
| |
| / { |
| model = "ASUS ZenWatch 2"; |
| compatible = "asus,sparrow", "qcom,apq8026"; |
| chassis-type = "watch"; |
| qcom,msm-id = <199 0x20000>; |
| qcom,board-id = <8 3005>; |
| |
| reserved-memory { |
| sbl_region: sbl@2f00000 { |
| reg = <0x02f00000 0x100000>; |
| no-map; |
| }; |
| external_image_region: external-image@3100000 { |
| reg = <0x3100000 0x200000>; |
| no-map; |
| }; |
| peripheral_region: peripheral@3300000 { |
| reg = <0x3300000 0x600000>; |
| no-map; |
| }; |
| adsp_region: adsp@3900000 { |
| reg = <0x3900000 0x1400000>; |
| no-map; |
| }; |
| modem_region: modem@4d00000 { |
| reg = <0x4d00000 0x1b00000>; |
| no-map; |
| }; |
| modem_efs_region: modem-efs@7f00000 { |
| reg = <0x7f00000 0x100000>; |
| no-map; |
| }; |
| }; |
| |
| vreg_wlan: wlan-regulator { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "wl-reg"; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| |
| gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wlan_regulator_default_state>; |
| }; |
| }; |
| |
| &adsp { |
| status = "okay"; |
| }; |
| |
| &blsp1_uart1 { |
| status = "okay"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_uart1_default_state>; |
| |
| bluetooth { |
| compatible = "brcm,bcm43430a1-bt"; |
| max-speed = <3000000>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bluetooth_default_state>; |
| |
| host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; |
| device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; |
| shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &pm8226_vib { |
| status = "okay"; |
| }; |
| |
| &rpm_requests { |
| regulators { |
| compatible = "qcom,rpm-pm8226-regulators"; |
| |
| pm8226_s3: s3 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1300000>; |
| }; |
| pm8226_s4: s4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2200000>; |
| }; |
| pm8226_s5: s5 { |
| regulator-min-microvolt = <1150000>; |
| regulator-max-microvolt = <1150000>; |
| }; |
| |
| pm8226_l1: l1 { |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| }; |
| pm8226_l2: l2 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| pm8226_l3: l3 { |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1337500>; |
| }; |
| pm8226_l4: l4 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| pm8226_l5: l5 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| pm8226_l6: l6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| pm8226_l7: l7 { |
| regulator-min-microvolt = <1900000>; |
| regulator-max-microvolt = <1900000>; |
| }; |
| pm8226_l8: l8 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| pm8226_l9: l9 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| pm8226_l10: l10 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| pm8226_l12: l12 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| pm8226_l14: l14 { |
| regulator-min-microvolt = <2750000>; |
| regulator-max-microvolt = <2750000>; |
| }; |
| pm8226_l15: l15 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| pm8226_l16: l16 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| pm8226_l17: l17 { |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| pm8226_l18: l18 { |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| pm8226_l19: l19 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| }; |
| pm8226_l20: l20 { |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3075000>; |
| }; |
| pm8226_l21: l21 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| pm8226_l22: l22 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| pm8226_l23: l23 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| pm8226_l24: l24 { |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1350000>; |
| }; |
| pm8226_l25: l25 { |
| regulator-min-microvolt = <1775000>; |
| regulator-max-microvolt = <2125000>; |
| }; |
| pm8226_l26: l26 { |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| }; |
| pm8226_l27: l27 { |
| regulator-min-microvolt = <2050000>; |
| regulator-max-microvolt = <2050000>; |
| }; |
| pm8226_l28: l28 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| |
| pm8226_lvs1: lvs1 {}; |
| }; |
| }; |
| |
| &sdhc_1 { |
| status = "okay"; |
| |
| vmmc-supply = <&pm8226_l17>; |
| vqmmc-supply = <&pm8226_l6>; |
| |
| bus-width = <8>; |
| non-removable; |
| }; |
| |
| &sdhc_3 { |
| status = "okay"; |
| |
| max-frequency = <100000000>; |
| non-removable; |
| |
| vmmc-supply = <&vreg_wlan>; |
| vqmmc-supply = <&pm8226_l6>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| wifi@1 { |
| compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; |
| reg = <1>; |
| |
| interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; |
| interrupt-names = "host-wake"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wlan_hostwake_default_state>; |
| }; |
| }; |
| |
| &smbb { |
| qcom,fast-charge-safe-current = <1500000>; |
| qcom,fast-charge-current-limit = <350000>; |
| qcom,fast-charge-safe-voltage = <4430000>; |
| qcom,fast-charge-high-threshold-voltage = <4400000>; |
| qcom,auto-recharge-threshold-voltage = <4300000>; |
| qcom,minimum-input-voltage = <4400000>; |
| }; |
| |
| &tlmm { |
| blsp1_uart1_default_state: blsp1-uart1-default-state { |
| pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| function = "blsp_uart1"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| bluetooth_default_state: bluetooth-default-state { |
| pins = "gpio48", "gpio61"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| wlan_hostwake_default_state: wlan-hostwake-default-state { |
| pins = "gpio46"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| wlan_regulator_default_state: wlan-regulator-default-state { |
| pins = "gpio35"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| &usb { |
| status = "okay"; |
| extcon = <&smbb>; |
| dr_mode = "peripheral"; |
| }; |
| |
| &usb_hs_phy { |
| extcon = <&smbb>; |
| v1p8-supply = <&pm8226_l10>; |
| v3p3-supply = <&pm8226_l20>; |
| }; |
