arch/powerpc/boot/dts/bluestone.dts - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Device Tree for Bluestone (APM821xx) board.
  *
  * Copyright (c) 2010, Applied Micro Circuits Corporation
  * Author: Tirumala R Marri <tmarri@apm.com>
  */

 /dts-v1/;

 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "apm,bluestone";
 	compatible = "apm,bluestone";
 	dcr-parent = <&{/cpus/cpu@0}>;

 	aliases {
 		ethernet0 = &EMAC0;
 		serial0 = &UART0;
 		serial1 = &UART1;
 	};

 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,apm821xx";
 			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
 			i-cache-line-size = <32>;
 			d-cache-line-size = <32>;
 			i-cache-size = <32768>;
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 			next-level-cache = <&L2C0>;
 		};
 	};

 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};

 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
 		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
 	};

 	UIC1: interrupt-controller1 {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
 		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
 		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};

 	UIC2: interrupt-controller2 {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
 		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
 		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};

 	UIC3: interrupt-controller3 {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
 		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
 		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};

 	OCM: ocm@400040000 {
 		compatible = "ibm,ocm";
 		status = "okay";
 		cell-index = <1>;
 		/* configured in U-Boot */
 		reg = <4 0x00040000 0x8000>; /* 32K */
 	};

 	SDR0: sdr {
 		compatible = "ibm,sdr-apm821xx";
 		dcr-reg = <0x00e 0x002>;
 	};

 	CPR0: cpr {
 		compatible = "ibm,cpr-apm821xx";
 		dcr-reg = <0x00c 0x002>;
 	};

 	L2C0: l2c {
 		compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
 		dcr-reg = <0x020 0x008
 			   0x030 0x008>;
 		cache-line-size = <32>;
 		cache-size = <262144>;
 		interrupt-parent = <&UIC1>;
 		interrupts = <11 1>;
 	};

 	plb {
 		compatible = "ibm,plb4";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges;
 		clock-frequency = <0>; /* Filled in by U-Boot */

 		SDRAM0: sdram {
 			compatible = "ibm,sdram-apm821xx";
 			dcr-reg = <0x010 0x002>;
 		};

 		MAL0: mcmal {
 			compatible = "ibm,mcmal2";
 			descriptor-memory = "ocm";
 			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <1>;
 			num-rx-chans = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
 			interrupt-parent = <&UIC2>;
 			interrupts = <	/*TXEOB*/ 0x6 0x4
 					/*RXEOB*/ 0x7 0x4
 					/*SERR*/  0x3 0x4
 					/*TXDE*/  0x4 0x4
 					/*RXDE*/  0x5 0x4>;
 		};

 		POB0: opb {
 			compatible = "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */

 			EBC0: ebc {
 				compatible = "ibm,ebc";
 				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
 				ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
 				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;

 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
 					reg = <0x00000000 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
 						reg = <0x00000000 0x00180000>;
 					};
 					partition@180000 {
 						label = "env";
 						reg = <0x00180000 0x00020000>;
 					};
 					partition@1a0000 {
 						label = "u-boot";
 						reg = <0x001a0000 0x00060000>;
 					};
 				};

 				ndfc@1,0 {
 					compatible = "ibm,ndfc";
 					reg = <0x00000003 0x00000000 0x00002000>;
 					ccr = <0x00001000>;
 					bank-settings = <0x80002222>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					/* 2Gb Nand Flash */
 					nand {
 						#address-cells = <1>;
 						#size-cells = <1>;

 						partition@0 {
 							label = "firmware";
 							reg   = <0x00000000 0x00C00000>;
 						};
 						partition@c00000 {
 							label = "environment";
 							reg   = <0x00C00000 0x00B00000>;
 						};
 						partition@1700000 {
 							label = "kernel";
 							reg   = <0x01700000 0x00E00000>;
 						};
 						partition@2500000 {
 							label = "root";
 							reg   = <0x02500000 0x08200000>;
 						};
 						partition@a700000 {
 							label = "device-tree";
 							reg   = <0x0A700000 0x00B00000>;
 						};
 						partition@b200000 {
 							label = "config";
 							reg   = <0x0B200000 0x00D00000>;
 						};
 						partition@bf00000 {
 							label = "diag";
 							reg   = <0x0BF00000 0x00C00000>;
 						};
 						partition@cb00000 {
 							label = "vendor";
 							reg   = <0x0CB00000 0x3500000>;
 						};
 					};
 				};
 			};

 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
 				reg = <0xef600300 0x00000008>;
 				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
 				interrupts = <0x1 0x4>;
 			};

 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
 				reg = <0xef600400 0x00000008>;
 				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x1 0x4>;
 			};

 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic";
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				rtc@68 {
 					compatible = "st,m41t80";
 					reg = <0x68>;
 					interrupt-parent = <&UIC0>;
 					interrupts = <0x9 0x8>;
 				};
 				sttm@4C {
 					compatible = "adm,adm1032";
 					reg = <0x4C>;
 					interrupt-parent = <&UIC1>;
 					interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
 				};
 			};

 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic";
 				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x3 0x4>;
 			};

 			RGMII0: emac-rgmii@ef601500 {
 				compatible = "ibm,rgmii";
 				reg = <0xef601500 0x00000008>;
 				has-mdio;
 			};

 			TAH0: emac-tah@ef601350 {
 				compatible = "ibm,tah";
 				reg = <0xef601350 0x00000030>;
 			};

 			EMAC0: ethernet@ef600c00 {
 				device_type = "network";
 				compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
 						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
 				reg = <0xef600c00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
 				max-frame-size = <9000>;
 				rx-fifo-size = <16384>;
 				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
 				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				tah-device = <&TAH0>;
 				tah-channel = <0>;
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
 		};

 		PCIE0: pcie@d00000000 {
 			device_type = "pci";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
 			primary;
 			port = <0x0>; /* port number */
 			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
 			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
 			dcr-reg = <0x100 0x020>;
 			sdr-base = <0x300>;

 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
 				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;

 			/* Inbound 2GB range starting at 0 */
 			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;

 			/* This drives busses 40 to 0x7f */
 			bus-range = <0x40 0x7f>;

 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
 			 * We are de-swizzling here because the numbers are actually for
 			 * port of the root complex virtual P2P bridge. But I want
 			 * to avoid putting a node for it in the tree, so the numbers
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
 				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
 				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
 				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
 				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
 	};
 };
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* Device Tree for Bluestone (APM821xx) board.
	*
	* Copyright (c) 2010, Applied Micro Circuits Corporation
	* Author: Tirumala R Marri <tmarri@apm.com>
	*/

	/dts-v1/;

	/ {
	#address-cells = <2>;
	#size-cells = <1>;
	model = "apm,bluestone";
	compatible = "apm,bluestone";
	dcr-parent = <&{/cpus/cpu@0}>;

	aliases {
	ethernet0 = &EMAC0;
	serial0 = &UART0;
	serial1 = &UART1;
	};

	cpus {
	#address-cells = <1>;
	#size-cells = <0>;

	cpu@0 {
	device_type = "cpu";
	model = "PowerPC,apm821xx";
	reg = <0x00000000>;
	clock-frequency = <0>; /* Filled in by U-Boot */
	timebase-frequency = <0>; /* Filled in by U-Boot */
	i-cache-line-size = <32>;
	d-cache-line-size = <32>;
	i-cache-size = <32768>;
	d-cache-size = <32768>;
	dcr-controller;
	dcr-access-method = "native";
	next-level-cache = <&L2C0>;
	};
	};

	memory {
	device_type = "memory";
	reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
	};

	UIC0: interrupt-controller0 {
	compatible = "ibm,uic";
	interrupt-controller;
	cell-index = <0>;
	dcr-reg = <0x0c0 0x009>;
	#address-cells = <0>;
	#size-cells = <0>;
	#interrupt-cells = <2>;
	};

	UIC1: interrupt-controller1 {
	compatible = "ibm,uic";
	interrupt-controller;
	cell-index = <1>;
	dcr-reg = <0x0d0 0x009>;
	#address-cells = <0>;
	#size-cells = <0>;
	#interrupt-cells = <2>;
	interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
	interrupt-parent = <&UIC0>;
	};

	UIC2: interrupt-controller2 {
	compatible = "ibm,uic";
	interrupt-controller;
	cell-index = <2>;
	dcr-reg = <0x0e0 0x009>;
	#address-cells = <0>;
	#size-cells = <0>;
	#interrupt-cells = <2>;
	interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
	interrupt-parent = <&UIC0>;
	};

	UIC3: interrupt-controller3 {
	compatible = "ibm,uic";
	interrupt-controller;
	cell-index = <3>;
	dcr-reg = <0x0f0 0x009>;
	#address-cells = <0>;
	#size-cells = <0>;
	#interrupt-cells = <2>;
	interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
	interrupt-parent = <&UIC0>;
	};

	OCM: ocm@400040000 {
	compatible = "ibm,ocm";
	status = "okay";
	cell-index = <1>;
	/* configured in U-Boot */
	reg = <4 0x00040000 0x8000>; /* 32K */
	};

	SDR0: sdr {
	compatible = "ibm,sdr-apm821xx";
	dcr-reg = <0x00e 0x002>;
	};

	CPR0: cpr {
	compatible = "ibm,cpr-apm821xx";
	dcr-reg = <0x00c 0x002>;
	};

	L2C0: l2c {
	compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
	dcr-reg = <0x020 0x008
	0x030 0x008>;
	cache-line-size = <32>;
	cache-size = <262144>;
	interrupt-parent = <&UIC1>;
	interrupts = <11 1>;
	};

	plb {
	compatible = "ibm,plb4";
	#address-cells = <2>;
	#size-cells = <1>;
	ranges;
	clock-frequency = <0>; /* Filled in by U-Boot */

	SDRAM0: sdram {
	compatible = "ibm,sdram-apm821xx";
	dcr-reg = <0x010 0x002>;
	};

	MAL0: mcmal {
	compatible = "ibm,mcmal2";
	descriptor-memory = "ocm";
	dcr-reg = <0x180 0x062>;
	num-tx-chans = <1>;
	num-rx-chans = <1>;
	#address-cells = <0>;
	#size-cells = <0>;
	interrupt-parent = <&UIC2>;
	interrupts = < /TXEOB/ 0x6 0x4
	/RXEOB/ 0x7 0x4
	/SERR/ 0x3 0x4
	/TXDE/ 0x4 0x4
	/RXDE/ 0x5 0x4>;
	};

	POB0: opb {
	compatible = "ibm,opb";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
	clock-frequency = <0>; /* Filled in by U-Boot */

	EBC0: ebc {
	compatible = "ibm,ebc";
	dcr-reg = <0x012 0x002>;
	#address-cells = <2>;
	#size-cells = <1>;
	clock-frequency = <0>; /* Filled in by U-Boot */
	/* ranges property is supplied by U-Boot */
	ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
	interrupts = <0x6 0x4>;
	interrupt-parent = <&UIC1>;

	nor_flash@0,0 {
	compatible = "amd,s29gl512n", "cfi-flash";
	bank-width = <2>;
	reg = <0x00000000 0x00000000 0x00400000>;
	#address-cells = <1>;
	#size-cells = <1>;
	partition@0 {
	label = "kernel";
	reg = <0x00000000 0x00180000>;
	};
	partition@180000 {
	label = "env";
	reg = <0x00180000 0x00020000>;
	};
	partition@1a0000 {
	label = "u-boot";
	reg = <0x001a0000 0x00060000>;
	};
	};

	ndfc@1,0 {
	compatible = "ibm,ndfc";
	reg = <0x00000003 0x00000000 0x00002000>;
	ccr = <0x00001000>;
	bank-settings = <0x80002222>;
	#address-cells = <1>;
	#size-cells = <1>;
	/* 2Gb Nand Flash */
	nand {
	#address-cells = <1>;
	#size-cells = <1>;

	partition@0 {
	label = "firmware";
	reg = <0x00000000 0x00C00000>;
	};
	partition@c00000 {
	label = "environment";
	reg = <0x00C00000 0x00B00000>;
	};
	partition@1700000 {
	label = "kernel";
	reg = <0x01700000 0x00E00000>;
	};
	partition@2500000 {
	label = "root";
	reg = <0x02500000 0x08200000>;
	};
	partition@a700000 {
	label = "device-tree";
	reg = <0x0A700000 0x00B00000>;
	};
	partition@b200000 {
	label = "config";
	reg = <0x0B200000 0x00D00000>;
	};
	partition@bf00000 {
	label = "diag";
	reg = <0x0BF00000 0x00C00000>;
	};
	partition@cb00000 {
	label = "vendor";
	reg = <0x0CB00000 0x3500000>;
	};
	};
	};
	};

	UART0: serial@ef600300 {
	device_type = "serial";
	compatible = "ns16550";
	reg = <0xef600300 0x00000008>;
	virtual-reg = <0xef600300>;
	clock-frequency = <0>; /* Filled in by U-Boot */
	current-speed = <0>; /* Filled in by U-Boot */
	interrupt-parent = <&UIC1>;
	interrupts = <0x1 0x4>;
	};

	UART1: serial@ef600400 {
	device_type = "serial";
	compatible = "ns16550";
	reg = <0xef600400 0x00000008>;
	virtual-reg = <0xef600400>;
	clock-frequency = <0>; /* Filled in by U-Boot */
	current-speed = <0>; /* Filled in by U-Boot */
	interrupt-parent = <&UIC0>;
	interrupts = <0x1 0x4>;
	};

	IIC0: i2c@ef600700 {
	compatible = "ibm,iic";
	reg = <0xef600700 0x00000014>;
	interrupt-parent = <&UIC0>;
	interrupts = <0x2 0x4>;
	#address-cells = <1>;
	#size-cells = <0>;
	rtc@68 {
	compatible = "st,m41t80";
	reg = <0x68>;
	interrupt-parent = <&UIC0>;
	interrupts = <0x9 0x8>;
	};
	sttm@4C {
	compatible = "adm,adm1032";
	reg = <0x4C>;
	interrupt-parent = <&UIC1>;
	interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
	};
	};

	IIC1: i2c@ef600800 {
	compatible = "ibm,iic";
	reg = <0xef600800 0x00000014>;
	interrupt-parent = <&UIC0>;
	interrupts = <0x3 0x4>;
	};

	RGMII0: emac-rgmii@ef601500 {
	compatible = "ibm,rgmii";
	reg = <0xef601500 0x00000008>;
	has-mdio;
	};

	TAH0: emac-tah@ef601350 {
	compatible = "ibm,tah";
	reg = <0xef601350 0x00000030>;
	};

	EMAC0: ethernet@ef600c00 {
	device_type = "network";
	compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
	interrupt-parent = <&EMAC0>;
	interrupts = <0x0 0x1>;
	#interrupt-cells = <1>;
	#address-cells = <0>;
	#size-cells = <0>;
	interrupt-map = </Status/ 0x0 &UIC2 0x10 0x4
	/Wake/ 0x1 &UIC2 0x14 0x4>;
	reg = <0xef600c00 0x000000c4>;
	local-mac-address = [000000000000]; /* Filled in by U-Boot */
	mal-device = <&MAL0>;
	mal-tx-channel = <0>;
	mal-rx-channel = <0>;
	cell-index = <0>;
	max-frame-size = <9000>;
	rx-fifo-size = <16384>;
	tx-fifo-size = <2048>;
	phy-mode = "rgmii";
	phy-map = <0x00000000>;
	rgmii-device = <&RGMII0>;
	rgmii-channel = <0>;
	tah-device = <&TAH0>;
	tah-channel = <0>;
	has-inverted-stacr-oc;
	has-new-stacr-staopc;
	};
	};

	PCIE0: pcie@d00000000 {
	device_type = "pci";
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
	primary;
	port = <0x0>; /* port number */
	reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
	0x0000000c 0x08010000 0x00001000>; /* Registers */
	dcr-reg = <0x100 0x020>;
	sdr-base = <0x300>;

	/* Outbound ranges, one memory and one IO,
	* later cannot be changed
	*/
	ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
	0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
	0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;

	/* Inbound 2GB range starting at 0 */
	dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;

	/* This drives busses 40 to 0x7f */
	bus-range = <0x40 0x7f>;

	/* Legacy interrupts (note the weird polarity, the bridge seems
	* to invert PCIe legacy interrupts).
	* We are de-swizzling here because the numbers are actually for
	* port of the root complex virtual P2P bridge. But I want
	* to avoid putting a node for it in the tree, so the numbers
	* below are basically de-swizzled numbers.
	* The real slot is on idsel 0, so the swizzling is 1:1
	*/
	interrupt-map-mask = <0x0 0x0 0x0 0x7>;
	interrupt-map = <
	0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
	0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
	0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
	0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
	};
	};
	};