| # SPDX-License-Identifier: GPL-2.0 |
| menuconfig COMEDI |
| tristate "Data acquisition support (comedi)" |
| help |
| Enable support for a wide range of data acquisition devices |
| for Linux. |
| |
| if COMEDI |
| |
| config COMEDI_DEBUG |
| bool "Comedi debugging" |
| help |
| This is an option for use by developers; most people should |
| say N here. This enables comedi core and driver debugging. |
| |
| config COMEDI_DEFAULT_BUF_SIZE_KB |
| int "Comedi default initial asynchronous buffer size in KiB" |
| default "2048" |
| help |
| This is the default asynchronous buffer size which is used for |
| commands running in the background in kernel space. This |
| defaults to 2048 KiB of memory so that a 16 channel card |
| running at 10 kHz has of 2-4 seconds of buffer. |
| |
| config COMEDI_DEFAULT_BUF_MAXSIZE_KB |
| int "Comedi default maximum asynchronous buffer size in KiB" |
| default "20480" |
| help |
| This is the default maximum asynchronous buffer size which can |
| be requested by a userspace program without root privileges. |
| This is set to 20480 KiB so that a fast I/O card with 16 |
| channels running at 100 kHz has 2-4 seconds of buffer. |
| |
| menuconfig COMEDI_MISC_DRIVERS |
| bool "Comedi misc drivers" |
| help |
| Enable comedi misc drivers to be built |
| |
| Note that the answer to this question won't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about misc non-hardware comedi drivers. |
| |
| if COMEDI_MISC_DRIVERS |
| |
| config COMEDI_BOND |
| tristate "Comedi device bonding support" |
| select COMEDI_KCOMEDILIB |
| help |
| Enable support for a driver to 'bond' (merge) multiple subdevices |
| from multiple devices together as one. |
| |
| Currently, it only handles digital I/O subdevices. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called comedi_bond. |
| |
| config COMEDI_TEST |
| tristate "Fake waveform generator support" |
| help |
| Enable support for the fake waveform generator. |
| This driver is mainly for testing purposes, but can also be used to |
| generate sample waveforms on systems that don't have data acquisition |
| hardware. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called comedi_test. |
| |
| config COMEDI_PARPORT |
| tristate "Parallel port support" |
| help |
| Enable support for the standard parallel port. |
| A cheap and easy way to get a few more digital I/O lines. Steal |
| additional parallel ports from old computers or your neighbors' |
| computers. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called comedi_parport. |
| |
| config COMEDI_SSV_DNP |
| tristate "SSV Embedded Systems DIL/Net-PC support" |
| depends on X86_32 || COMPILE_TEST |
| help |
| Enable support for SSV Embedded Systems DIL/Net-PC |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ssv_dnp. |
| |
| endif # COMEDI_MISC_DRIVERS |
| |
| menuconfig COMEDI_ISA_DRIVERS |
| bool "Comedi ISA and PC/104 drivers" |
| help |
| Enable comedi ISA and PC/104 drivers to be built |
| |
| Note that the answer to this question won't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about ISA and PC/104 comedi drivers. |
| |
| if COMEDI_ISA_DRIVERS |
| |
| config COMEDI_PCL711 |
| tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support" |
| select COMEDI_8254 |
| help |
| Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcl711. |
| |
| config COMEDI_PCL724 |
| tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO" |
| select COMEDI_8255 |
| help |
| Enable support for ISA and PC/104 based 8255 digital i/o boards. This |
| driver provides a legacy comedi driver wrapper for the generic 8255 |
| support driver. |
| |
| Supported boards include: |
| Advantech PCL-724 24 channels |
| Advantech PCL-722 144 (or 96) channels |
| Advantech PCL-731 48 channels |
| ADlink ACL-7122 144 (or 96) channels |
| ADlink ACL-7124 24 channels |
| ADlink PET-48DIO 48 channels |
| WinSystems PCM-IO48 48 channels (PC/104) |
| Diamond Systems ONYX-MM-DIO 48 channels (PC/104) |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcl724. |
| |
| config COMEDI_PCL726 |
| tristate "Advantech PCL-726 and compatible ISA card support" |
| help |
| Enable support for Advantech PCL-726 and compatible ISA cards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcl726. |
| |
| config COMEDI_PCL730 |
| tristate "Simple Digital I/O board support (8-bit ports)" |
| help |
| Enable support for various simple ISA or PC/104 Digital I/O boards. |
| These boards all use 8-bit I/O ports. |
| |
| Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out |
| ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out |
| ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out |
| Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out |
| Advantech PCL-725 iso - 8 in/8 out |
| ICP P8R8-DIO iso - 8 in/8 out |
| ADlink ACL-7225b iso - 16 in/16 out |
| ICP P16R16-DIO iso - 16 in/16 out |
| Advantech PCL-733 iso - 32 in |
| Advantech PCL-734 iso - 32 out |
| Diamond Systems OPMM-1616-XT iso - 16 in/16 out |
| Diamond Systems PEARL-MM-P iso - 16 out |
| Diamond Systems IR104-PBF iso - 20 in/20 out |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcl730. |
| |
| config COMEDI_PCL812 |
| tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" |
| select COMEDI_ISADMA if ISA_DMA_API |
| select COMEDI_8254 |
| help |
| Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink |
| ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA, |
| A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcl812. |
| |
| config COMEDI_PCL816 |
| tristate "Advantech PCL-814 and PCL-816 ISA card support" |
| select COMEDI_ISADMA if ISA_DMA_API |
| select COMEDI_8254 |
| help |
| Enable support for Advantech PCL-814 and PCL-816 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcl816. |
| |
| config COMEDI_PCL818 |
| tristate "Advantech PCL-718 and PCL-818 ISA card support" |
| select COMEDI_ISADMA if ISA_DMA_API |
| select COMEDI_8254 |
| help |
| Enable support for Advantech PCL-818 ISA cards |
| PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcl818. |
| |
| config COMEDI_PCM3724 |
| tristate "Advantech PCM-3724 PC/104 card support" |
| select COMEDI_8255 |
| help |
| Enable support for Advantech PCM-3724 PC/104 cards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcm3724. |
| |
| config COMEDI_AMPLC_DIO200_ISA |
| tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E" |
| select COMEDI_AMPLC_DIO200 |
| help |
| Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and |
| PC272E ISA DIO boards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called amplc_dio200. |
| |
| config COMEDI_AMPLC_PC236_ISA |
| tristate "Amplicon PC36AT DIO board support" |
| select COMEDI_AMPLC_PC236 |
| help |
| Enable support for Amplicon PC36AT ISA DIO board. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called amplc_pc236. |
| |
| config COMEDI_AMPLC_PC263_ISA |
| tristate "Amplicon PC263 relay board support" |
| help |
| Enable support for Amplicon PC263 ISA relay board. This board has |
| 16 reed relay output channels. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called amplc_pc263. |
| |
| config COMEDI_RTI800 |
| tristate "Analog Devices RTI-800/815 ISA card support" |
| help |
| Enable support for Analog Devices RTI-800/815 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called rti800. |
| |
| config COMEDI_RTI802 |
| tristate "Analog Devices RTI-802 ISA card support" |
| help |
| Enable support for Analog Devices RTI-802 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called rti802. |
| |
| config COMEDI_DAC02 |
| tristate "Keithley Metrabyte DAC02 compatible ISA card support" |
| help |
| Enable support for Keithley Metrabyte DAC02 compatible ISA cards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dac02. |
| |
| config COMEDI_DAS16M1 |
| tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support" |
| select COMEDI_8254 |
| select COMEDI_8255 |
| help |
| Enable support for Measurement Computing CIO-DAS16/M1 ISA cards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called das16m1. |
| |
| config COMEDI_DAS08_ISA |
| tristate "DAS-08 compatible ISA and PC/104 card support" |
| select COMEDI_DAS08 |
| help |
| Enable support for Keithley Metrabyte/ComputerBoards DAS08 |
| and compatible ISA and PC/104 cards: |
| Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH, |
| DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO, |
| DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called das08_isa. |
| |
| config COMEDI_DAS16 |
| tristate "DAS-16 compatible ISA and PC/104 card support" |
| select COMEDI_ISADMA if ISA_DMA_API |
| select COMEDI_8254 |
| select COMEDI_8255 |
| help |
| Enable support for Keithley Metrabyte/ComputerBoards DAS16 |
| and compatible ISA and PC/104 cards: |
| Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202, |
| DAS-1401, DAS-1402, DAS-1601, DAS-1602 and |
| ComputerBoards/MeasurementComputing PC104-DAS16/JR/, |
| PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12, |
| CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12, |
| CIO-DAS1602/16, CIO-DAS16/330 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called das16. |
| |
| config COMEDI_DAS800 |
| tristate "DAS800 and compatible ISA card support" |
| select COMEDI_8254 |
| help |
| Enable support for Keithley Metrabyte DAS800 and compatible ISA cards |
| Keithley Metrabyte DAS-800, DAS-801, DAS-802 |
| Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and |
| CIO-DAS802/16 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called das800. |
| |
| config COMEDI_DAS1800 |
| tristate "DAS1800 and compatible ISA card support" |
| select COMEDI_ISADMA if ISA_DMA_API |
| select COMEDI_8254 |
| help |
| Enable support for DAS1800 and compatible ISA cards |
| Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO, |
| DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO, |
| DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST, |
| DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and |
| DAS-1802AO |
| |
| To compile this driver as a module, choose M here: the module will be |
| called das1800. |
| |
| config COMEDI_DAS6402 |
| tristate "DAS6402 and compatible ISA card support" |
| select COMEDI_8254 |
| help |
| Enable support for DAS6402 and compatible ISA cards |
| Computerboards, Keithley Metrabyte DAS6402 and compatibles |
| |
| To compile this driver as a module, choose M here: the module will be |
| called das6402. |
| |
| config COMEDI_DT2801 |
| tristate "Data Translation DT2801 ISA card support" |
| help |
| Enable support for Data Translation DT2801 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dt2801. |
| |
| config COMEDI_DT2811 |
| tristate "Data Translation DT2811 ISA card support" |
| help |
| Enable support for Data Translation DT2811 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dt2811. |
| |
| config COMEDI_DT2814 |
| tristate "Data Translation DT2814 ISA card support" |
| help |
| Enable support for Data Translation DT2814 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dt2814. |
| |
| config COMEDI_DT2815 |
| tristate "Data Translation DT2815 ISA card support" |
| help |
| Enable support for Data Translation DT2815 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dt2815. |
| |
| config COMEDI_DT2817 |
| tristate "Data Translation DT2817 ISA card support" |
| help |
| Enable support for Data Translation DT2817 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dt2817. |
| |
| config COMEDI_DT282X |
| tristate "Data Translation DT2821 series and DT-EZ ISA card support" |
| select COMEDI_ISADMA if ISA_DMA_API |
| help |
| Enable support for Data Translation DT2821 series including DT-EZ |
| DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI, |
| DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828, |
| DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dt282x. |
| |
| config COMEDI_DMM32AT |
| tristate "Diamond Systems MM-32-AT PC/104 board support" |
| select COMEDI_8255 |
| help |
| Enable support for Diamond Systems MM-32-AT PC/104 boards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dmm32at. |
| |
| config COMEDI_FL512 |
| tristate "FL512 ISA card support" |
| help |
| Enable support for FL512 ISA card |
| |
| To compile this driver as a module, choose M here: the module will be |
| called fl512. |
| |
| config COMEDI_AIO_AIO12_8 |
| tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support" |
| select COMEDI_8254 |
| select COMEDI_8255 |
| help |
| Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board |
| |
| To compile this driver as a module, choose M here: the module will be |
| called aio_aio12_8. |
| |
| config COMEDI_AIO_IIRO_16 |
| tristate "I/O Products PC/104 IIRO16 Board support" |
| help |
| Enable support for I/O Products PC/104 IIRO16 Relay And Isolated |
| Input Board |
| |
| To compile this driver as a module, choose M here: the module will be |
| called aio_iiro_16. |
| |
| config COMEDI_II_PCI20KC |
| tristate "Intelligent Instruments PCI-20001C carrier support" |
| depends on HAS_IOMEM |
| help |
| Enable support for Intelligent Instruments PCI-20001C carrier |
| PCI-20001, PCI-20006 and PCI-20341 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ii_pci20kc. |
| |
| config COMEDI_C6XDIGIO |
| tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support" |
| help |
| Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter |
| card |
| |
| To compile this driver as a module, choose M here: the module will be |
| called c6xdigio. |
| |
| config COMEDI_MPC624 |
| tristate "Micro/sys MPC-624 PC/104 board support" |
| help |
| Enable support for Micro/sys MPC-624 PC/104 board |
| |
| To compile this driver as a module, choose M here: the module will be |
| called mpc624. |
| |
| config COMEDI_ADQ12B |
| tristate "MicroAxial ADQ12-B data acquisition and control card support" |
| help |
| Enable MicroAxial ADQ12-B daq and control card support. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adq12b. |
| |
| config COMEDI_NI_AT_A2150 |
| tristate "NI AT-A2150 ISA card support" |
| select COMEDI_ISADMA if ISA_DMA_API |
| select COMEDI_8254 |
| help |
| Enable support for National Instruments AT-A2150 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_at_a2150. |
| |
| config COMEDI_NI_AT_AO |
| tristate "NI AT-AO-6/10 EISA card support" |
| select COMEDI_8254 |
| help |
| Enable support for National Instruments AT-AO-6/10 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_at_ao. |
| |
| config COMEDI_NI_ATMIO |
| tristate "NI AT-MIO E series ISA-PNP card support" |
| select COMEDI_8255 |
| select COMEDI_NI_TIO |
| help |
| Enable support for National Instruments AT-MIO E series cards |
| National Instruments AT-MIO-16E-1 (ni_atmio), |
| AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3, |
| AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_atmio. |
| |
| config COMEDI_NI_ATMIO16D |
| tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support" |
| select COMEDI_8255 |
| help |
| Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_atmio16d. |
| |
| config COMEDI_NI_LABPC_ISA |
| tristate "NI Lab-PC and compatibles ISA support" |
| select COMEDI_NI_LABPC |
| help |
| Enable support for National Instruments Lab-PC and compatibles |
| Lab-PC-1200, Lab-PC-1200AI, Lab-PC+. |
| Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has |
| not yet been added to the driver. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_labpc. |
| |
| config COMEDI_PCMAD |
| tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support" |
| help |
| Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcmad. |
| |
| config COMEDI_PCMDA12 |
| tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support" |
| help |
| Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards. |
| Note that the board is not ISA-PNP capable and thus needs the I/O |
| port comedi_config parameter. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcmda12. |
| |
| config COMEDI_PCMMIO |
| tristate "Winsystems PCM-MIO PC/104 board support" |
| help |
| Enable support for Winsystems PCM-MIO multifunction PC/104 boards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcmmio. |
| |
| config COMEDI_PCMUIO |
| tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support" |
| help |
| Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called pcmuio. |
| |
| config COMEDI_MULTIQ3 |
| tristate "Quanser Consulting MultiQ-3 ISA card support" |
| help |
| Enable support for Quanser Consulting MultiQ-3 ISA cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called multiq3. |
| |
| config COMEDI_S526 |
| tristate "Sensoray s526 support" |
| help |
| Enable support for Sensoray s526 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called s526. |
| |
| endif # COMEDI_ISA_DRIVERS |
| |
| menuconfig COMEDI_PCI_DRIVERS |
| tristate "Comedi PCI drivers" |
| depends on PCI |
| help |
| Enable support for comedi PCI drivers. |
| |
| To compile this support as a module, choose M here: the module will |
| be called comedi_pci. |
| |
| if COMEDI_PCI_DRIVERS |
| |
| config COMEDI_8255_PCI |
| tristate "Generic PCI based 8255 digital i/o board support" |
| select COMEDI_8255 |
| help |
| Enable support for PCI based 8255 digital i/o boards. This driver |
| provides a PCI wrapper around the generic 8255 driver. |
| |
| Supported boards: |
| ADlink - PCI-7224, PCI-7248, and PCI-7296 |
| Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and |
| PCI-DIO96H |
| National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, |
| PCI-6503B, PCI-6503X, and PXI-6503 |
| |
| To compile this driver as a module, choose M here: the module will |
| be called 8255_pci. |
| |
| config COMEDI_ADDI_WATCHDOG |
| tristate |
| help |
| Provides support for the watchdog subdevice found on many ADDI-DATA |
| boards. This module will be automatically selected when needed. The |
| module will be called addi_watchdog. |
| |
| config COMEDI_ADDI_APCI_1032 |
| tristate "ADDI-DATA APCI_1032 support" |
| help |
| Enable support for ADDI-DATA APCI_1032 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_1032. |
| |
| config COMEDI_ADDI_APCI_1500 |
| tristate "ADDI-DATA APCI_1500 support" |
| help |
| Enable support for ADDI-DATA APCI_1500 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_1500. |
| |
| config COMEDI_ADDI_APCI_1516 |
| tristate "ADDI-DATA APCI-1016/1516/2016 support" |
| select COMEDI_ADDI_WATCHDOG |
| help |
| Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards. |
| These are 16 channel, optically isolated, digital I/O boards. The 1516 |
| and 2016 boards also have a watchdog for resetting the outputs to "0". |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_1516. |
| |
| config COMEDI_ADDI_APCI_1564 |
| tristate "ADDI-DATA APCI_1564 support" |
| select COMEDI_ADDI_WATCHDOG |
| help |
| Enable support for ADDI-DATA APCI_1564 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_1564. |
| |
| config COMEDI_ADDI_APCI_16XX |
| tristate "ADDI-DATA APCI_16xx support" |
| help |
| Enable support for ADDI-DATA APCI_16xx cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_16xx. |
| |
| config COMEDI_ADDI_APCI_2032 |
| tristate "ADDI-DATA APCI_2032 support" |
| select COMEDI_ADDI_WATCHDOG |
| help |
| Enable support for ADDI-DATA APCI_2032 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_2032. |
| |
| config COMEDI_ADDI_APCI_2200 |
| tristate "ADDI-DATA APCI_2200 support" |
| select COMEDI_ADDI_WATCHDOG |
| help |
| Enable support for ADDI-DATA APCI_2200 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_2200. |
| |
| config COMEDI_ADDI_APCI_3120 |
| tristate "ADDI-DATA APCI_3120/3001 support" |
| depends on HAS_DMA |
| help |
| Enable support for ADDI-DATA APCI_3120/3001 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_3120. |
| |
| config COMEDI_ADDI_APCI_3501 |
| tristate "ADDI-DATA APCI_3501 support" |
| help |
| Enable support for ADDI-DATA APCI_3501 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_3501. |
| |
| config COMEDI_ADDI_APCI_3XXX |
| tristate "ADDI-DATA APCI_3xxx support" |
| help |
| Enable support for ADDI-DATA APCI_3xxx cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called addi_apci_3xxx. |
| |
| config COMEDI_ADL_PCI6208 |
| tristate "ADLink PCI-6208A support" |
| help |
| Enable support for ADLink PCI-6208A cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adl_pci6208. |
| |
| config COMEDI_ADL_PCI7X3X |
| tristate "ADLink PCI-723X/743X isolated digital i/o board support" |
| help |
| Enable support for ADlink PCI-723X/743X isolated digital i/o boards. |
| Supported boards include the 32-channel PCI-7230 (16 in/16 out), |
| PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel |
| PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out). |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adl_pci7x3x. |
| |
| config COMEDI_ADL_PCI8164 |
| tristate "ADLink PCI-8164 4 Axes Motion Control board support" |
| help |
| Enable support for ADlink PCI-8164 4 Axes Motion Control board |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adl_pci8164. |
| |
| config COMEDI_ADL_PCI9111 |
| tristate "ADLink PCI-9111HR support" |
| select COMEDI_8254 |
| help |
| Enable support for ADlink PCI9111 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adl_pci9111. |
| |
| config COMEDI_ADL_PCI9118 |
| tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" |
| depends on HAS_DMA |
| select COMEDI_8254 |
| help |
| Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adl_pci9118. |
| |
| config COMEDI_ADV_PCI1710 |
| tristate "Advantech PCI-171x and PCI-1731 support" |
| select COMEDI_8254 |
| help |
| Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711, |
| PCI-1713 and PCI-1731 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adv_pci1710. |
| |
| config COMEDI_ADV_PCI1720 |
| tristate "Advantech PCI-1720 support" |
| help |
| Enable support for Advantech PCI-1720 Analog Output board. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adv_pci1720. |
| |
| config COMEDI_ADV_PCI1723 |
| tristate "Advantech PCI-1723 support" |
| help |
| Enable support for Advantech PCI-1723 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adv_pci1723. |
| |
| config COMEDI_ADV_PCI1724 |
| tristate "Advantech PCI-1724U support" |
| help |
| Enable support for Advantech PCI-1724U cards. These are 32-channel |
| analog output cards with voltage and current loop output ranges and |
| 14-bit resolution. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adv_pci1724. |
| |
| config COMEDI_ADV_PCI1760 |
| tristate "Advantech PCI-1760 support" |
| help |
| Enable support for Advantech PCI-1760 board. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adv_pci1760. |
| |
| config COMEDI_ADV_PCI_DIO |
| tristate "Advantech PCI DIO card support" |
| select COMEDI_8254 |
| select COMEDI_8255 |
| help |
| Enable support for Advantech PCI DIO cards |
| PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U, |
| PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756, |
| PCI-1761 and PCI-1762 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called adv_pci_dio. |
| |
| config COMEDI_AMPLC_DIO200_PCI |
| tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support" |
| select COMEDI_AMPLC_DIO200 |
| help |
| Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236 |
| and PCIe296 DIO boards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called amplc_dio200_pci. |
| |
| config COMEDI_AMPLC_PC236_PCI |
| tristate "Amplicon PCI236 DIO board support" |
| select COMEDI_AMPLC_PC236 |
| help |
| Enable support for Amplicon PCI236 DIO board. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called amplc_pci236. |
| |
| config COMEDI_AMPLC_PC263_PCI |
| tristate "Amplicon PCI263 relay board support" |
| help |
| Enable support for Amplicon PCI263 relay board. This is a PCI board |
| with 16 reed relay output channels. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called amplc_pci263. |
| |
| config COMEDI_AMPLC_PCI224 |
| tristate "Amplicon PCI224 and PCI234 support" |
| select COMEDI_8254 |
| help |
| Enable support for Amplicon PCI224 and PCI234 AO boards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called amplc_pci224. |
| |
| config COMEDI_AMPLC_PCI230 |
| tristate "Amplicon PCI230 and PCI260 support" |
| select COMEDI_8254 |
| select COMEDI_8255 |
| help |
| Enable support for Amplicon PCI230 and PCI260 Multifunction I/O |
| boards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called amplc_pci230. |
| |
| config COMEDI_CONTEC_PCI_DIO |
| tristate "Contec PIO1616L digital I/O board support" |
| help |
| Enable support for the Contec PIO1616L digital I/O board |
| |
| To compile this driver as a module, choose M here: the module will be |
| called contec_pci_dio. |
| |
| config COMEDI_DAS08_PCI |
| tristate "DAS-08 PCI support" |
| select COMEDI_DAS08 |
| help |
| Enable support for PCI DAS-08 cards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called das08_pci. |
| |
| config COMEDI_DT3000 |
| tristate "Data Translation DT3000 series support" |
| help |
| Enable support for Data Translation DT3000 series |
| DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and |
| DT3004-200 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dt3000. |
| |
| config COMEDI_DYNA_PCI10XX |
| tristate "Dynalog PCI DAQ series support" |
| help |
| Enable support for Dynalog PCI DAQ series |
| PCI-1050 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dyna_pci10xx. |
| |
| config COMEDI_GSC_HPDI |
| tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support" |
| help |
| Enable support for General Standards Corporation high speed parallel |
| digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32. |
| Only receive mode works, transmit not supported. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called gsc_hpdi. |
| |
| config COMEDI_MF6X4 |
| tristate "Humusoft MF634 and MF624 DAQ Card support" |
| help |
| This driver supports both Humusoft MF634 and MF624 Data acquisition |
| cards. The legacy Humusoft MF614 card is not supported. |
| |
| config COMEDI_ICP_MULTI |
| tristate "Inova ICP_MULTI support" |
| help |
| Enable support for Inova ICP_MULTI card |
| |
| To compile this driver as a module, choose M here: the module will be |
| called icp_multi. |
| |
| config COMEDI_DAQBOARD2000 |
| tristate "IOtech DAQboard/2000 support" |
| select COMEDI_8255 |
| help |
| Enable support for the IOtech DAQboard/2000 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called daqboard2000. |
| |
| config COMEDI_JR3_PCI |
| tristate "JR3/PCI force sensor board support" |
| help |
| Enable support for JR3/PCI force sensor boards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called jr3_pci. |
| |
| config COMEDI_KE_COUNTER |
| tristate "Kolter-Electronic PCI Counter 1 card support" |
| help |
| Enable support for Kolter-Electronic PCI Counter 1 cards |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ke_counter. |
| |
| config COMEDI_CB_PCIDAS64 |
| tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support" |
| select COMEDI_8255 |
| help |
| Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx, |
| 60xx, and 4020 series with the PLX 9080 PCI controller |
| |
| To compile this driver as a module, choose M here: the module will be |
| called cb_pcidas64. |
| |
| config COMEDI_CB_PCIDAS |
| tristate "MeasurementComputing PCI-DAS support" |
| select COMEDI_8254 |
| select COMEDI_8255 |
| help |
| Enable support for ComputerBoards/MeasurementComputing PCI-DAS with |
| AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr, |
| PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001 |
| and PCI_DAS1002. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called cb_pcidas. |
| |
| config COMEDI_CB_PCIDDA |
| tristate "MeasurementComputing PCI-DDA series support" |
| select COMEDI_8255 |
| help |
| Enable support for ComputerBoards/MeasurementComputing PCI-DDA |
| series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16, |
| PCI-DDA04/16 and PCI-DDA02/16 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called cb_pcidda. |
| |
| config COMEDI_CB_PCIMDAS |
| tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support" |
| select COMEDI_8254 |
| select COMEDI_8255 |
| help |
| Enable support for ComputerBoards/MeasurementComputing PCI Migration |
| series PCIM-DAS1602/16 and PCIe-DAS1602/16. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called cb_pcimdas. |
| |
| config COMEDI_CB_PCIMDDA |
| tristate "MeasurementComputing PCIM-DDA06-16 support" |
| select COMEDI_8255 |
| help |
| Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called cb_pcimdda. |
| |
| config COMEDI_ME4000 |
| tristate "Meilhaus ME-4000 support" |
| select COMEDI_8254 |
| help |
| Enable support for Meilhaus PCI data acquisition cards |
| ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is |
| |
| To compile this driver as a module, choose M here: the module will be |
| called me4000. |
| |
| config COMEDI_ME_DAQ |
| tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support" |
| help |
| Enable support for Meilhaus PCI data acquisition cards |
| ME-2000i, ME-2600i and ME-3000vm1 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called me_daq. |
| |
| config COMEDI_NI_6527 |
| tristate "NI 6527 support" |
| help |
| Enable support for the National Instruments 6527 PCI card |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_6527. |
| |
| config COMEDI_NI_65XX |
| tristate "NI 65xx static dio PCI card support" |
| help |
| Enable support for National Instruments 65xx static dio boards. |
| Supported devices: National Instruments PCI-6509 (ni_65xx), |
| PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, |
| PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, |
| PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_65xx. |
| |
| config COMEDI_NI_660X |
| tristate "NI 660x counter/timer PCI card support" |
| depends on HAS_DMA |
| select COMEDI_NI_TIOCMD |
| help |
| Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, |
| PXI-6602, PXI-6608, PCI-6624, and PXI-6624. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_660x. |
| |
| config COMEDI_NI_670X |
| tristate "NI 670x PCI card support" |
| help |
| Enable support for National Instruments PCI-6703 and PCI-6704 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_670x. |
| |
| config COMEDI_NI_LABPC_PCI |
| tristate "NI Lab-PC PCI-1200 support" |
| select COMEDI_NI_LABPC |
| help |
| Enable support for National Instruments Lab-PC PCI-1200. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_labpc_pci. |
| |
| config COMEDI_NI_PCIDIO |
| tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support" |
| depends on HAS_DMA |
| select COMEDI_MITE |
| select COMEDI_8255 |
| help |
| Enable support for National Instruments PCI-DIO-32HS, PXI-6533, |
| PCI-6533 and PCI-6534 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_pcidio. |
| |
| config COMEDI_NI_PCIMIO |
| tristate "NI PCI-MIO-E series and M series support" |
| depends on HAS_DMA |
| select COMEDI_NI_TIOCMD |
| select COMEDI_8255 |
| help |
| Enable support for National Instruments PCI-MIO-E series and M series |
| (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, |
| PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E, |
| PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E, |
| PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111, |
| PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225, |
| PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251, |
| PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259, |
| PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281, |
| PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711, |
| PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E, |
| PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_pcimio. |
| |
| config COMEDI_RTD520 |
| tristate "Real Time Devices PCI4520/DM7520 support" |
| select COMEDI_8254 |
| help |
| Enable support for Real Time Devices PCI4520/DM7520 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called rtd520. |
| |
| config COMEDI_S626 |
| tristate "Sensoray 626 support" |
| help |
| Enable support for Sensoray 626 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called s626. |
| |
| config COMEDI_MITE |
| depends on HAS_DMA |
| tristate |
| |
| config COMEDI_NI_TIOCMD |
| tristate |
| depends on HAS_DMA |
| select COMEDI_NI_TIO |
| select COMEDI_MITE |
| |
| endif # COMEDI_PCI_DRIVERS |
| |
| menuconfig COMEDI_PCMCIA_DRIVERS |
| tristate "Comedi PCMCIA drivers" |
| depends on PCMCIA |
| help |
| Enable support for comedi PCMCIA drivers. |
| |
| To compile this support as a module, choose M here: the module will |
| be called comedi_pcmcia. |
| |
| if COMEDI_PCMCIA_DRIVERS |
| |
| config COMEDI_CB_DAS16_CS |
| tristate "CB DAS16 series PCMCIA support" |
| select COMEDI_8254 |
| help |
| Enable support for the ComputerBoards/MeasurementComputing PCMCIA |
| cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called cb_das16_cs. |
| |
| config COMEDI_DAS08_CS |
| tristate "CB DAS08 PCMCIA support" |
| select COMEDI_DAS08 |
| help |
| Enable support for the ComputerBoards/MeasurementComputing DAS-08 |
| PCMCIA card |
| |
| To compile this driver as a module, choose M here: the module will be |
| called das08_cs. |
| |
| config COMEDI_NI_DAQ_700_CS |
| tristate "NI DAQCard-700 PCMCIA support" |
| help |
| Enable support for the National Instruments PCMCIA DAQCard-700 DIO |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_daq_700. |
| |
| config COMEDI_NI_DAQ_DIO24_CS |
| tristate "NI DAQ-Card DIO-24 PCMCIA support" |
| select COMEDI_8255 |
| help |
| Enable support for the National Instruments PCMCIA DAQ-Card DIO-24 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_daq_dio24. |
| |
| config COMEDI_NI_LABPC_CS |
| tristate "NI DAQCard-1200 PCMCIA support" |
| select COMEDI_NI_LABPC |
| help |
| Enable support for the National Instruments PCMCIA DAQCard-1200 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_labpc_cs. |
| |
| config COMEDI_NI_MIO_CS |
| tristate "NI DAQCard E series PCMCIA support" |
| select COMEDI_NI_TIO |
| select COMEDI_8255 |
| help |
| Enable support for the National Instruments PCMCIA DAQCard E series |
| DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E |
| and DAQCard-6036E |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_mio_cs. |
| |
| config COMEDI_QUATECH_DAQP_CS |
| tristate "Quatech DAQP PCMCIA data capture card support" |
| help |
| Enable support for the Quatech DAQP PCMCIA data capture cards |
| DAQP-208 and DAQP-308 |
| |
| To compile this driver as a module, choose M here: the module will be |
| called quatech_daqp_cs. |
| |
| endif # COMEDI_PCMCIA_DRIVERS |
| |
| menuconfig COMEDI_USB_DRIVERS |
| tristate "Comedi USB drivers" |
| depends on USB |
| help |
| Enable support for comedi USB drivers. |
| |
| To compile this support as a module, choose M here: the module will |
| be called comedi_usb. |
| |
| if COMEDI_USB_DRIVERS |
| |
| config COMEDI_DT9812 |
| tristate "DataTranslation DT9812 USB module support" |
| help |
| Enable support for the Data Translation DT9812 USB module |
| |
| To compile this driver as a module, choose M here: the module will be |
| called dt9812. |
| |
| config COMEDI_NI_USB6501 |
| tristate "NI USB-6501 support" |
| help |
| Enable support for the National Instruments USB-6501 module. |
| |
| The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that |
| provides 24 digital I/O lines channels and one 32-bit counter. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ni_usb6501. |
| |
| config COMEDI_USBDUX |
| tristate "ITL USB-DUX-D support" |
| help |
| Enable support for the Incite Technology Ltd USB-DUX-D Board |
| |
| To compile this driver as a module, choose M here: the module will be |
| called usbdux. |
| |
| config COMEDI_USBDUXFAST |
| tristate "ITL USB-DUXfast support" |
| help |
| Enable support for the Incite Technology Ltd USB-DUXfast Board |
| |
| To compile this driver as a module, choose M here: the module will be |
| called usbduxfast. |
| |
| config COMEDI_USBDUXSIGMA |
| tristate "ITL USB-DUXsigma support" |
| help |
| Enable support for the Incite Technology Ltd USB-DUXsigma Board |
| |
| To compile this driver as a module, choose M here: the module will be |
| called usbduxsigma. |
| |
| config COMEDI_VMK80XX |
| tristate "Velleman VM110/VM140 USB Board support" |
| help |
| Build the Velleman USB Board Low-Level Driver supporting the |
| K8055/K8061 aka VM110/VM140 devices |
| |
| To compile this driver as a module, choose M here: the module will be |
| called vmk80xx. |
| |
| endif # COMEDI_USB_DRIVERS |
| |
| config COMEDI_8254 |
| tristate |
| |
| config COMEDI_8255 |
| tristate |
| |
| config COMEDI_8255_SA |
| tristate "Standalone 8255 support" |
| select COMEDI_8255 |
| help |
| Enable support for 8255 digital I/O as a standalone driver. |
| |
| You should enable compilation this driver if you plan to use a board |
| that has an 8255 chip at a known I/O base address and there are no |
| other Comedi drivers for the board. |
| |
| Note that Comedi drivers for most multi-function boards incorporating |
| an 8255 chip use the 'comedi_8255' module. Most PCI-based 8255 |
| boards use the 8255_pci driver as a wrapper around the 'comedi_8255' |
| module. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called 8255. |
| |
| config COMEDI_KCOMEDILIB |
| tristate "Comedi kcomedilib" |
| help |
| Build the kcomedilib. |
| |
| This is a kernel module used to open and manipulate Comedi devices |
| from within kernel code. It is currently only used by the |
| comedi_bond driver, and its functionality has been stripped down to |
| the needs of that driver, so is currently not very useful for |
| anything else. |
| |
| To compile kcomedilib as a module, choose M here: the module will be |
| called kcomedilib. |
| |
| config COMEDI_AMPLC_DIO200 |
| select COMEDI_8254 |
| tristate |
| |
| config COMEDI_AMPLC_PC236 |
| tristate |
| select COMEDI_8255 |
| |
| config COMEDI_DAS08 |
| tristate |
| select COMEDI_8254 |
| select COMEDI_8255 |
| |
| config COMEDI_ISADMA |
| tristate |
| |
| config COMEDI_NI_LABPC |
| tristate |
| select COMEDI_8254 |
| select COMEDI_8255 |
| |
| config COMEDI_NI_LABPC_ISADMA |
| tristate |
| default COMEDI_NI_LABPC |
| depends on COMEDI_NI_LABPC_ISA != n |
| depends on ISA_DMA_API |
| select COMEDI_ISADMA |
| |
| config COMEDI_NI_TIO |
| tristate |
| select COMEDI_NI_ROUTING |
| |
| config COMEDI_NI_ROUTING |
| tristate |
| |
| config COMEDI_TESTS |
| tristate "Comedi unit tests" |
| help |
| Enable comedi unit-test modules to be built. |
| |
| Note that the answer to this question won't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about comedi unit-test modules. |
| |
| if COMEDI_TESTS |
| |
| config COMEDI_TESTS_EXAMPLE |
| tristate "Comedi example unit-test module" |
| help |
| Enable support for an example unit-test module. This is just a |
| silly example to be used as a basis for writing other unit-test |
| modules. |
| |
| To compile this as a module, choose M here: the module will be called |
| comedi_example_test. |
| |
| config COMEDI_TESTS_NI_ROUTES |
| tristate "NI routing unit-test module" |
| select COMEDI_NI_ROUTING |
| help |
| Enable support for a unit-test module to test the signal routing |
| code used by comedi drivers for various National Instruments cards. |
| |
| To compile this as a module, choose M here: the module will be called |
| ni_routes_test. |
| |
| endif # COMEDI_TESTS |
| |
| endif # COMEDI |
