| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * A hwmon driver for the Analog Devices ADT7470 |
| * Copyright (C) 2007 IBM |
| * |
| * Author: Darrick J. Wong <darrick.wong@oracle.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/log2.h> |
| #include <linux/kthread.h> |
| #include <linux/regmap.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/util_macros.h> |
| |
| /* Addresses to scan */ |
| static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END }; |
| |
| /* ADT7470 registers */ |
| #define ADT7470_REG_BASE_ADDR 0x20 |
| #define ADT7470_REG_TEMP_BASE_ADDR 0x20 |
| #define ADT7470_REG_TEMP_MAX_ADDR 0x29 |
| #define ADT7470_REG_FAN_BASE_ADDR 0x2A |
| #define ADT7470_REG_FAN_MAX_ADDR 0x31 |
| #define ADT7470_REG_PWM_BASE_ADDR 0x32 |
| #define ADT7470_REG_PWM_MAX_ADDR 0x35 |
| #define ADT7470_REG_PWM_MAX_BASE_ADDR 0x38 |
| #define ADT7470_REG_PWM_MAX_MAX_ADDR 0x3B |
| #define ADT7470_REG_CFG 0x40 |
| #define ADT7470_STRT_MASK 0x01 |
| #define ADT7470_TEST_MASK 0x02 |
| #define ADT7470_FSPD_MASK 0x04 |
| #define ADT7470_T05_STB_MASK 0x80 |
| #define ADT7470_REG_ALARM1 0x41 |
| #define ADT7470_R1T_ALARM 0x01 |
| #define ADT7470_R2T_ALARM 0x02 |
| #define ADT7470_R3T_ALARM 0x04 |
| #define ADT7470_R4T_ALARM 0x08 |
| #define ADT7470_R5T_ALARM 0x10 |
| #define ADT7470_R6T_ALARM 0x20 |
| #define ADT7470_R7T_ALARM 0x40 |
| #define ADT7470_OOL_ALARM 0x80 |
| #define ADT7470_REG_ALARM2 0x42 |
| #define ADT7470_R8T_ALARM 0x01 |
| #define ADT7470_R9T_ALARM 0x02 |
| #define ADT7470_R10T_ALARM 0x04 |
| #define ADT7470_FAN1_ALARM 0x10 |
| #define ADT7470_FAN2_ALARM 0x20 |
| #define ADT7470_FAN3_ALARM 0x40 |
| #define ADT7470_FAN4_ALARM 0x80 |
| #define ADT7470_REG_TEMP_LIMITS_BASE_ADDR 0x44 |
| #define ADT7470_REG_TEMP_LIMITS_MAX_ADDR 0x57 |
| #define ADT7470_REG_FAN_MIN_BASE_ADDR 0x58 |
| #define ADT7470_REG_FAN_MIN_MAX_ADDR 0x5F |
| #define ADT7470_REG_FAN_MAX_BASE_ADDR 0x60 |
| #define ADT7470_REG_FAN_MAX_MAX_ADDR 0x67 |
| #define ADT7470_REG_PWM_CFG_BASE_ADDR 0x68 |
| #define ADT7470_REG_PWM12_CFG 0x68 |
| #define ADT7470_PWM2_AUTO_MASK 0x40 |
| #define ADT7470_PWM1_AUTO_MASK 0x80 |
| #define ADT7470_PWM_AUTO_MASK 0xC0 |
| #define ADT7470_REG_PWM34_CFG 0x69 |
| #define ADT7470_PWM3_AUTO_MASK 0x40 |
| #define ADT7470_PWM4_AUTO_MASK 0x80 |
| #define ADT7470_REG_PWM_MIN_BASE_ADDR 0x6A |
| #define ADT7470_REG_PWM_MIN_MAX_ADDR 0x6D |
| #define ADT7470_REG_PWM_TEMP_MIN_BASE_ADDR 0x6E |
| #define ADT7470_REG_PWM_TEMP_MIN_MAX_ADDR 0x71 |
| #define ADT7470_REG_CFG_2 0x74 |
| #define ADT7470_REG_ACOUSTICS12 0x75 |
| #define ADT7470_REG_ACOUSTICS34 0x76 |
| #define ADT7470_REG_DEVICE 0x3D |
| #define ADT7470_REG_VENDOR 0x3E |
| #define ADT7470_REG_REVISION 0x3F |
| #define ADT7470_REG_ALARM1_MASK 0x72 |
| #define ADT7470_REG_ALARM2_MASK 0x73 |
| #define ADT7470_REG_PWM_AUTO_TEMP_BASE_ADDR 0x7C |
| #define ADT7470_REG_PWM_AUTO_TEMP_MAX_ADDR 0x7D |
| #define ADT7470_REG_MAX_ADDR 0x81 |
| |
| #define ADT7470_TEMP_COUNT 10 |
| #define ADT7470_TEMP_REG(x) (ADT7470_REG_TEMP_BASE_ADDR + (x)) |
| #define ADT7470_TEMP_MIN_REG(x) (ADT7470_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2)) |
| #define ADT7470_TEMP_MAX_REG(x) (ADT7470_REG_TEMP_LIMITS_BASE_ADDR + \ |
| ((x) * 2) + 1) |
| |
| #define ADT7470_FAN_COUNT 4 |
| #define ADT7470_REG_FAN(x) (ADT7470_REG_FAN_BASE_ADDR + ((x) * 2)) |
| #define ADT7470_REG_FAN_MIN(x) (ADT7470_REG_FAN_MIN_BASE_ADDR + ((x) * 2)) |
| #define ADT7470_REG_FAN_MAX(x) (ADT7470_REG_FAN_MAX_BASE_ADDR + ((x) * 2)) |
| |
| #define ADT7470_PWM_COUNT 4 |
| #define ADT7470_REG_PWM(x) (ADT7470_REG_PWM_BASE_ADDR + (x)) |
| #define ADT7470_REG_PWM_MAX(x) (ADT7470_REG_PWM_MAX_BASE_ADDR + (x)) |
| #define ADT7470_REG_PWM_MIN(x) (ADT7470_REG_PWM_MIN_BASE_ADDR + (x)) |
| #define ADT7470_REG_PWM_TMIN(x) (ADT7470_REG_PWM_TEMP_MIN_BASE_ADDR + (x)) |
| #define ADT7470_REG_PWM_CFG(x) (ADT7470_REG_PWM_CFG_BASE_ADDR + ((x) / 2)) |
| #define ADT7470_REG_PWM_AUTO_TEMP(x) (ADT7470_REG_PWM_AUTO_TEMP_BASE_ADDR + \ |
| ((x) / 2)) |
| |
| #define ALARM2(x) ((x) << 8) |
| |
| #define ADT7470_VENDOR 0x41 |
| #define ADT7470_DEVICE 0x70 |
| /* datasheet only mentions a revision 2 */ |
| #define ADT7470_REVISION 0x02 |
| |
| /* "all temps" according to hwmon sysfs interface spec */ |
| #define ADT7470_PWM_ALL_TEMPS 0x3FF |
| |
| /* How often do we reread sensors values? (In jiffies) */ |
| #define SENSOR_REFRESH_INTERVAL (5 * HZ) |
| |
| /* How often do we reread sensor limit values? (In jiffies) */ |
| #define LIMIT_REFRESH_INTERVAL (60 * HZ) |
| |
| /* Wait at least 200ms per sensor for 10 sensors */ |
| #define TEMP_COLLECTION_TIME 2000 |
| |
| /* auto update thing won't fire more than every 2s */ |
| #define AUTO_UPDATE_INTERVAL 2000 |
| |
| /* datasheet says to divide this number by the fan reading to get fan rpm */ |
| #define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) |
| #define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM |
| #define FAN_PERIOD_INVALID 65535 |
| #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) |
| |
| /* Config registers 1 and 2 include fields for selecting the PWM frequency */ |
| #define ADT7470_CFG_LF 0x40 |
| #define ADT7470_FREQ_MASK 0x70 |
| #define ADT7470_FREQ_SHIFT 4 |
| |
| struct adt7470_data { |
| struct regmap *regmap; |
| struct mutex lock; |
| char sensors_valid; |
| char limits_valid; |
| unsigned long sensors_last_updated; /* In jiffies */ |
| unsigned long limits_last_updated; /* In jiffies */ |
| |
| int num_temp_sensors; /* -1 = probe */ |
| int temperatures_probed; |
| |
| s8 temp[ADT7470_TEMP_COUNT]; |
| s8 temp_min[ADT7470_TEMP_COUNT]; |
| s8 temp_max[ADT7470_TEMP_COUNT]; |
| u16 fan[ADT7470_FAN_COUNT]; |
| u16 fan_min[ADT7470_FAN_COUNT]; |
| u16 fan_max[ADT7470_FAN_COUNT]; |
| u16 alarm; |
| u16 alarms_mask; |
| u8 force_pwm_max; |
| u8 pwm[ADT7470_PWM_COUNT]; |
| u8 pwm_max[ADT7470_PWM_COUNT]; |
| u8 pwm_automatic[ADT7470_PWM_COUNT]; |
| u8 pwm_min[ADT7470_PWM_COUNT]; |
| s8 pwm_tmin[ADT7470_PWM_COUNT]; |
| u8 pwm_auto_temp[ADT7470_PWM_COUNT]; |
| |
| struct task_struct *auto_update; |
| unsigned int auto_update_interval; |
| }; |
| |
| /* |
| * 16-bit registers on the ADT7470 are low-byte first. The data sheet says |
| * that the low byte must be read before the high byte. |
| */ |
| static inline int adt7470_read_word_data(struct adt7470_data *data, unsigned int reg, |
| unsigned int *val) |
| { |
| u8 regval[2]; |
| int err; |
| |
| err = regmap_bulk_read(data->regmap, reg, ®val, 2); |
| if (err < 0) |
| return err; |
| |
| *val = regval[0] | (regval[1] << 8); |
| |
| return 0; |
| } |
| |
| static inline int adt7470_write_word_data(struct adt7470_data *data, unsigned int reg, |
| unsigned int val) |
| { |
| u8 regval[2]; |
| |
| regval[0] = val & 0xFF; |
| regval[1] = val >> 8; |
| |
| return regmap_bulk_write(data->regmap, reg, ®val, 2); |
| } |
| |
| /* Probe for temperature sensors. Assumes lock is held */ |
| static int adt7470_read_temperatures(struct adt7470_data *data) |
| { |
| unsigned long res; |
| unsigned int pwm_cfg[2]; |
| int err; |
| int i; |
| u8 pwm[ADT7470_FAN_COUNT]; |
| |
| /* save pwm[1-4] config register */ |
| err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(0), &pwm_cfg[0]); |
| if (err < 0) |
| return err; |
| err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(2), &pwm_cfg[1]); |
| if (err < 0) |
| return err; |
| |
| /* set manual pwm to whatever it is set to now */ |
| err = regmap_bulk_read(data->regmap, ADT7470_REG_PWM(0), &pwm[0], |
| ADT7470_PWM_COUNT); |
| if (err < 0) |
| return err; |
| |
| /* put pwm in manual mode */ |
| err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(0), |
| ADT7470_PWM_AUTO_MASK, 0); |
| if (err < 0) |
| return err; |
| err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(2), |
| ADT7470_PWM_AUTO_MASK, 0); |
| if (err < 0) |
| return err; |
| |
| /* write pwm control to whatever it was */ |
| err = regmap_bulk_write(data->regmap, ADT7470_REG_PWM(0), &pwm[0], |
| ADT7470_PWM_COUNT); |
| if (err < 0) |
| return err; |
| |
| /* start reading temperature sensors */ |
| err = regmap_update_bits(data->regmap, ADT7470_REG_CFG, |
| ADT7470_T05_STB_MASK, ADT7470_T05_STB_MASK); |
| if (err < 0) |
| return err; |
| |
| /* Delay is 200ms * number of temp sensors. */ |
| res = msleep_interruptible((data->num_temp_sensors >= 0 ? |
| data->num_temp_sensors * 200 : |
| TEMP_COLLECTION_TIME)); |
| |
| /* done reading temperature sensors */ |
| err = regmap_update_bits(data->regmap, ADT7470_REG_CFG, |
| ADT7470_T05_STB_MASK, 0); |
| if (err < 0) |
| return err; |
| |
| /* restore pwm[1-4] config registers */ |
| err = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(0), pwm_cfg[0]); |
| if (err < 0) |
| return err; |
| err = regmap_write(data->regmap, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]); |
| if (err < 0) |
| return err; |
| |
| if (res) |
| return -EAGAIN; |
| |
| /* Only count fans if we have to */ |
| if (data->num_temp_sensors >= 0) |
| return 0; |
| |
| err = regmap_bulk_read(data->regmap, ADT7470_TEMP_REG(0), &data->temp[0], |
| ADT7470_TEMP_COUNT); |
| if (err < 0) |
| return err; |
| for (i = 0; i < ADT7470_TEMP_COUNT; i++) { |
| if (data->temp[i]) |
| data->num_temp_sensors = i + 1; |
| } |
| data->temperatures_probed = 1; |
| return 0; |
| } |
| |
| static int adt7470_update_thread(void *p) |
| { |
| struct i2c_client *client = p; |
| struct adt7470_data *data = i2c_get_clientdata(client); |
| |
| while (!kthread_should_stop()) { |
| mutex_lock(&data->lock); |
| adt7470_read_temperatures(data); |
| mutex_unlock(&data->lock); |
| |
| if (kthread_should_stop()) |
| break; |
| |
| schedule_timeout_interruptible(msecs_to_jiffies(data->auto_update_interval)); |
| } |
| |
| return 0; |
| } |
| |
| static int adt7470_update_sensors(struct adt7470_data *data) |
| { |
| unsigned int val; |
| int err; |
| int i; |
| |
| if (!data->temperatures_probed) |
| err = adt7470_read_temperatures(data); |
| else |
| err = regmap_bulk_read(data->regmap, ADT7470_TEMP_REG(0), &data->temp[0], |
| ADT7470_TEMP_COUNT); |
| if (err < 0) |
| return err; |
| |
| for (i = 0; i < ADT7470_FAN_COUNT; i++) { |
| err = adt7470_read_word_data(data, ADT7470_REG_FAN(i), &val); |
| if (err < 0) |
| return err; |
| data->fan[i] = val; |
| } |
| |
| err = regmap_bulk_read(data->regmap, ADT7470_REG_PWM(0), &data->pwm[0], ADT7470_PWM_COUNT); |
| if (err < 0) |
| return err; |
| |
| for (i = 0; i < ADT7470_PWM_COUNT; i++) { |
| unsigned int mask; |
| |
| if (i % 2) |
| mask = ADT7470_PWM2_AUTO_MASK; |
| else |
| mask = ADT7470_PWM1_AUTO_MASK; |
| |
| err = regmap_read(data->regmap, ADT7470_REG_PWM_CFG(i), &val); |
| if (err < 0) |
| return err; |
| data->pwm_automatic[i] = !!(val & mask); |
| |
| err = regmap_read(data->regmap, ADT7470_REG_PWM_AUTO_TEMP(i), &val); |
| if (err < 0) |
| return err; |
| if (!(i % 2)) |
| data->pwm_auto_temp[i] = val >> 4; |
| else |
| data->pwm_auto_temp[i] = val & 0xF; |
| } |
| |
| err = regmap_read(data->regmap, ADT7470_REG_CFG, &val); |
| if (err < 0) |
| return err; |
| data->force_pwm_max = !!(val & ADT7470_FSPD_MASK); |
| |
| err = regmap_read(data->regmap, ADT7470_REG_ALARM1, &val); |
| if (err < 0) |
| return err; |
| data->alarm = val; |
| if (data->alarm & ADT7470_OOL_ALARM) { |
| err = regmap_read(data->regmap, ADT7470_REG_ALARM2, &val); |
| if (err < 0) |
| return err; |
| data->alarm |= ALARM2(val); |
| } |
| |
| err = adt7470_read_word_data(data, ADT7470_REG_ALARM1_MASK, &val); |
| if (err < 0) |
| return err; |
| data->alarms_mask = val; |
| |
| return 0; |
| } |
| |
| static int adt7470_update_limits(struct adt7470_data *data) |
| { |
| unsigned int val; |
| int err; |
| int i; |
| |
| for (i = 0; i < ADT7470_TEMP_COUNT; i++) { |
| err = regmap_read(data->regmap, ADT7470_TEMP_MIN_REG(i), &val); |
| if (err < 0) |
| return err; |
| data->temp_min[i] = (s8)val; |
| err = regmap_read(data->regmap, ADT7470_TEMP_MAX_REG(i), &val); |
| if (err < 0) |
| return err; |
| data->temp_max[i] = (s8)val; |
| } |
| |
| for (i = 0; i < ADT7470_FAN_COUNT; i++) { |
| err = adt7470_read_word_data(data, ADT7470_REG_FAN_MIN(i), &val); |
| if (err < 0) |
| return err; |
| data->fan_min[i] = val; |
| err = adt7470_read_word_data(data, ADT7470_REG_FAN_MAX(i), &val); |
| if (err < 0) |
| return err; |
| data->fan_max[i] = val; |
| } |
| |
| for (i = 0; i < ADT7470_PWM_COUNT; i++) { |
| err = regmap_read(data->regmap, ADT7470_REG_PWM_MAX(i), &val); |
| if (err < 0) |
| return err; |
| data->pwm_max[i] = val; |
| err = regmap_read(data->regmap, ADT7470_REG_PWM_MIN(i), &val); |
| if (err < 0) |
| return err; |
| data->pwm_min[i] = val; |
| err = regmap_read(data->regmap, ADT7470_REG_PWM_TMIN(i), &val); |
| if (err < 0) |
| return err; |
| data->pwm_tmin[i] = (s8)val; |
| } |
| |
| return 0; |
| } |
| |
| static struct adt7470_data *adt7470_update_device(struct device *dev) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| unsigned long local_jiffies = jiffies; |
| int need_sensors = 1; |
| int need_limits = 1; |
| int err; |
| |
| /* |
| * Figure out if we need to update the shadow registers. |
| * Lockless means that we may occasionally report out of |
| * date data. |
| */ |
| if (time_before(local_jiffies, data->sensors_last_updated + |
| SENSOR_REFRESH_INTERVAL) && |
| data->sensors_valid) |
| need_sensors = 0; |
| |
| if (time_before(local_jiffies, data->limits_last_updated + |
| LIMIT_REFRESH_INTERVAL) && |
| data->limits_valid) |
| need_limits = 0; |
| |
| if (!need_sensors && !need_limits) |
| return data; |
| |
| mutex_lock(&data->lock); |
| if (need_sensors) { |
| err = adt7470_update_sensors(data); |
| if (err < 0) |
| goto out; |
| data->sensors_last_updated = local_jiffies; |
| data->sensors_valid = 1; |
| } |
| |
| if (need_limits) { |
| err = adt7470_update_limits(data); |
| if (err < 0) |
| goto out; |
| data->limits_last_updated = local_jiffies; |
| data->limits_valid = 1; |
| } |
| out: |
| mutex_unlock(&data->lock); |
| |
| return err < 0 ? ERR_PTR(err) : data; |
| } |
| |
| static ssize_t auto_update_interval_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->auto_update_interval); |
| } |
| |
| static ssize_t auto_update_interval_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, 0, 60000); |
| |
| mutex_lock(&data->lock); |
| data->auto_update_interval = temp; |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static ssize_t num_temp_sensors_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->num_temp_sensors); |
| } |
| |
| static ssize_t num_temp_sensors_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long temp; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, -1, 10); |
| |
| mutex_lock(&data->lock); |
| data->num_temp_sensors = temp; |
| if (temp < 0) |
| data->temperatures_probed = 0; |
| mutex_unlock(&data->lock); |
| |
| return count; |
| } |
| |
| static int adt7470_temp_read(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| *val = 1000 * data->temp[channel]; |
| break; |
| case hwmon_temp_min: |
| *val = 1000 * data->temp_min[channel]; |
| break; |
| case hwmon_temp_max: |
| *val = 1000 * data->temp_max[channel]; |
| break; |
| case hwmon_temp_alarm: |
| *val = !!(data->alarm & channel); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int adt7470_temp_write(struct device *dev, u32 attr, int channel, long val) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| int err; |
| |
| val = clamp_val(val, -128000, 127000); |
| val = DIV_ROUND_CLOSEST(val, 1000); |
| |
| switch (attr) { |
| case hwmon_temp_min: |
| mutex_lock(&data->lock); |
| data->temp_min[channel] = val; |
| err = regmap_write(data->regmap, ADT7470_TEMP_MIN_REG(channel), val); |
| mutex_unlock(&data->lock); |
| break; |
| case hwmon_temp_max: |
| mutex_lock(&data->lock); |
| data->temp_max[channel] = val; |
| err = regmap_write(data->regmap, ADT7470_TEMP_MAX_REG(channel), val); |
| mutex_unlock(&data->lock); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return err; |
| } |
| |
| static ssize_t alarm_mask_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%x\n", data->alarms_mask); |
| } |
| |
| static ssize_t alarm_mask_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long mask; |
| int err; |
| |
| if (kstrtoul(buf, 0, &mask)) |
| return -EINVAL; |
| |
| if (mask & ~0xffff) |
| return -EINVAL; |
| |
| mutex_lock(&data->lock); |
| data->alarms_mask = mask; |
| err = adt7470_write_word_data(data, ADT7470_REG_ALARM1_MASK, mask); |
| mutex_unlock(&data->lock); |
| |
| return err < 0 ? err : count; |
| } |
| |
| static int adt7470_fan_read(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| switch (attr) { |
| case hwmon_fan_input: |
| if (FAN_DATA_VALID(data->fan[channel])) |
| *val = FAN_PERIOD_TO_RPM(data->fan[channel]); |
| else |
| *val = 0; |
| break; |
| case hwmon_fan_min: |
| if (FAN_DATA_VALID(data->fan_min[channel])) |
| *val = FAN_PERIOD_TO_RPM(data->fan_min[channel]); |
| else |
| *val = 0; |
| break; |
| case hwmon_fan_max: |
| if (FAN_DATA_VALID(data->fan_max[channel])) |
| *val = FAN_PERIOD_TO_RPM(data->fan_max[channel]); |
| else |
| *val = 0; |
| break; |
| case hwmon_fan_alarm: |
| *val = !!(data->alarm & (1 << (12 + channel))); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int adt7470_fan_write(struct device *dev, u32 attr, int channel, long val) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| int err; |
| |
| if (val <= 0) |
| return -EINVAL; |
| |
| val = FAN_RPM_TO_PERIOD(val); |
| val = clamp_val(val, 1, 65534); |
| |
| switch (attr) { |
| case hwmon_fan_min: |
| mutex_lock(&data->lock); |
| data->fan_min[channel] = val; |
| err = adt7470_write_word_data(data, ADT7470_REG_FAN_MIN(channel), val); |
| mutex_unlock(&data->lock); |
| break; |
| case hwmon_fan_max: |
| mutex_lock(&data->lock); |
| data->fan_max[channel] = val; |
| err = adt7470_write_word_data(data, ADT7470_REG_FAN_MAX(channel), val); |
| mutex_unlock(&data->lock); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return err; |
| } |
| |
| static ssize_t force_pwm_max_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->force_pwm_max); |
| } |
| |
| static ssize_t force_pwm_max_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long temp; |
| int err; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| mutex_lock(&data->lock); |
| data->force_pwm_max = temp; |
| err = regmap_update_bits(data->regmap, ADT7470_REG_CFG, |
| ADT7470_FSPD_MASK, |
| temp ? ADT7470_FSPD_MASK : 0); |
| mutex_unlock(&data->lock); |
| |
| return err < 0 ? err : count; |
| } |
| |
| /* These are the valid PWM frequencies to the nearest Hz */ |
| static const int adt7470_freq_map[] = { |
| 11, 15, 22, 29, 35, 44, 59, 88, 1400, 22500 |
| }; |
| |
| static int pwm1_freq_get(struct device *dev) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| unsigned int cfg_reg_1, cfg_reg_2; |
| int index; |
| int err; |
| |
| mutex_lock(&data->lock); |
| err = regmap_read(data->regmap, ADT7470_REG_CFG, &cfg_reg_1); |
| if (err < 0) |
| goto out; |
| err = regmap_read(data->regmap, ADT7470_REG_CFG_2, &cfg_reg_2); |
| if (err < 0) |
| goto out; |
| mutex_unlock(&data->lock); |
| |
| index = (cfg_reg_2 & ADT7470_FREQ_MASK) >> ADT7470_FREQ_SHIFT; |
| if (!(cfg_reg_1 & ADT7470_CFG_LF)) |
| index += 8; |
| if (index >= ARRAY_SIZE(adt7470_freq_map)) |
| index = ARRAY_SIZE(adt7470_freq_map) - 1; |
| |
| return adt7470_freq_map[index]; |
| |
| out: |
| mutex_unlock(&data->lock); |
| return err; |
| } |
| |
| static int adt7470_pwm_read(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| *val = data->pwm[channel]; |
| break; |
| case hwmon_pwm_enable: |
| *val = 1 + data->pwm_automatic[channel]; |
| break; |
| case hwmon_pwm_freq: |
| *val = pwm1_freq_get(dev); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int pwm1_freq_set(struct device *dev, long freq) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| unsigned int low_freq = ADT7470_CFG_LF; |
| int index; |
| int err; |
| |
| /* Round the user value given to the closest available frequency */ |
| index = find_closest(freq, adt7470_freq_map, |
| ARRAY_SIZE(adt7470_freq_map)); |
| |
| if (index >= 8) { |
| index -= 8; |
| low_freq = 0; |
| } |
| |
| mutex_lock(&data->lock); |
| /* Configuration Register 1 */ |
| err = regmap_update_bits(data->regmap, ADT7470_REG_CFG, |
| ADT7470_CFG_LF, low_freq); |
| if (err < 0) |
| goto out; |
| |
| /* Configuration Register 2 */ |
| err = regmap_update_bits(data->regmap, ADT7470_REG_CFG_2, |
| ADT7470_FREQ_MASK, |
| index << ADT7470_FREQ_SHIFT); |
| out: |
| mutex_unlock(&data->lock); |
| |
| return err; |
| } |
| |
| static int adt7470_pwm_write(struct device *dev, u32 attr, int channel, long val) |
| { |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| unsigned int pwm_auto_reg_mask; |
| int err; |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| val = clamp_val(val, 0, 255); |
| mutex_lock(&data->lock); |
| data->pwm[channel] = val; |
| err = regmap_write(data->regmap, ADT7470_REG_PWM(channel), |
| data->pwm[channel]); |
| mutex_unlock(&data->lock); |
| break; |
| case hwmon_pwm_enable: |
| if (channel % 2) |
| pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; |
| else |
| pwm_auto_reg_mask = ADT7470_PWM1_AUTO_MASK; |
| |
| if (val != 2 && val != 1) |
| return -EINVAL; |
| val--; |
| |
| mutex_lock(&data->lock); |
| data->pwm_automatic[channel] = val; |
| err = regmap_update_bits(data->regmap, ADT7470_REG_PWM_CFG(channel), |
| pwm_auto_reg_mask, |
| val ? pwm_auto_reg_mask : 0); |
| mutex_unlock(&data->lock); |
| break; |
| case hwmon_pwm_freq: |
| err = pwm1_freq_set(dev, val); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return err; |
| } |
| |
| static ssize_t pwm_max_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->pwm_max[attr->index]); |
| } |
| |
| static ssize_t pwm_max_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long temp; |
| int err; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, 0, 255); |
| |
| mutex_lock(&data->lock); |
| data->pwm_max[attr->index] = temp; |
| err = regmap_write(data->regmap, ADT7470_REG_PWM_MAX(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return err < 0 ? err : count; |
| } |
| |
| static ssize_t pwm_min_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", data->pwm_min[attr->index]); |
| } |
| |
| static ssize_t pwm_min_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long temp; |
| int err; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, 0, 255); |
| |
| mutex_lock(&data->lock); |
| data->pwm_min[attr->index] = temp; |
| err = regmap_write(data->regmap, ADT7470_REG_PWM_MIN(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return err < 0 ? err : count; |
| } |
| |
| static ssize_t pwm_tmax_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| /* the datasheet says that tmax = tmin + 20C */ |
| return sprintf(buf, "%d\n", 1000 * (20 + data->pwm_tmin[attr->index])); |
| } |
| |
| static ssize_t pwm_tmin_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| return sprintf(buf, "%d\n", 1000 * data->pwm_tmin[attr->index]); |
| } |
| |
| static ssize_t pwm_tmin_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| long temp; |
| int err; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, -128000, 127000); |
| temp = DIV_ROUND_CLOSEST(temp, 1000); |
| |
| mutex_lock(&data->lock); |
| data->pwm_tmin[attr->index] = temp; |
| err = regmap_write(data->regmap, ADT7470_REG_PWM_TMIN(attr->index), |
| temp); |
| mutex_unlock(&data->lock); |
| |
| return err < 0 ? err : count; |
| } |
| |
| static ssize_t pwm_auto_temp_show(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = adt7470_update_device(dev); |
| u8 ctrl; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| ctrl = data->pwm_auto_temp[attr->index]; |
| if (ctrl) |
| return sprintf(buf, "%d\n", 1 << (ctrl - 1)); |
| else |
| return sprintf(buf, "%d\n", ADT7470_PWM_ALL_TEMPS); |
| } |
| |
| static int cvt_auto_temp(int input) |
| { |
| if (input == ADT7470_PWM_ALL_TEMPS) |
| return 0; |
| if (input < 1 || !is_power_of_2(input)) |
| return -EINVAL; |
| return ilog2(input) + 1; |
| } |
| |
| static ssize_t pwm_auto_temp_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct adt7470_data *data = dev_get_drvdata(dev); |
| int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); |
| unsigned int mask, val; |
| long temp; |
| int err; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = cvt_auto_temp(temp); |
| if (temp < 0) |
| return temp; |
| |
| mutex_lock(&data->lock); |
| data->pwm_automatic[attr->index] = temp; |
| |
| if (!(attr->index % 2)) { |
| mask = 0xF0; |
| val = (temp << 4) & 0xF0; |
| } else { |
| mask = 0x0F; |
| val = temp & 0x0F; |
| } |
| |
| err = regmap_update_bits(data->regmap, pwm_auto_reg, mask, val); |
| mutex_unlock(&data->lock); |
| |
| return err < 0 ? err : count; |
| } |
| |
| static DEVICE_ATTR_RW(alarm_mask); |
| static DEVICE_ATTR_RW(num_temp_sensors); |
| static DEVICE_ATTR_RW(auto_update_interval); |
| |
| static SENSOR_DEVICE_ATTR_RW(force_pwm_max, force_pwm_max, 0); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_pwm, pwm_min, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point1_pwm, pwm_min, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point1_pwm, pwm_min, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4_auto_point1_pwm, pwm_min, 3); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_pwm, pwm_max, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point2_pwm, pwm_max, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point2_pwm, pwm_max, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4_auto_point2_pwm, pwm_max, 3); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, pwm_tmin, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2_auto_point1_temp, pwm_tmin, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3_auto_point1_temp, pwm_tmin, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4_auto_point1_temp, pwm_tmin, 3); |
| |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point2_temp, pwm_tmax, 0); |
| static SENSOR_DEVICE_ATTR_RO(pwm2_auto_point2_temp, pwm_tmax, 1); |
| static SENSOR_DEVICE_ATTR_RO(pwm3_auto_point2_temp, pwm_tmax, 2); |
| static SENSOR_DEVICE_ATTR_RO(pwm4_auto_point2_temp, pwm_tmax, 3); |
| |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_channels_temp, pwm_auto_temp, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm2_auto_channels_temp, pwm_auto_temp, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm3_auto_channels_temp, pwm_auto_temp, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm4_auto_channels_temp, pwm_auto_temp, 3); |
| |
| static struct attribute *adt7470_attrs[] = { |
| &dev_attr_alarm_mask.attr, |
| &dev_attr_num_temp_sensors.attr, |
| &dev_attr_auto_update_interval.attr, |
| &sensor_dev_attr_force_pwm_max.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr, |
| NULL |
| }; |
| |
| ATTRIBUTE_GROUPS(adt7470); |
| |
| static int adt7470_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, |
| int channel, long *val) |
| { |
| switch (type) { |
| case hwmon_temp: |
| return adt7470_temp_read(dev, attr, channel, val); |
| case hwmon_fan: |
| return adt7470_fan_read(dev, attr, channel, val); |
| case hwmon_pwm: |
| return adt7470_pwm_read(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int adt7470_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, |
| int channel, long val) |
| { |
| switch (type) { |
| case hwmon_temp: |
| return adt7470_temp_write(dev, attr, channel, val); |
| case hwmon_fan: |
| return adt7470_fan_write(dev, attr, channel, val); |
| case hwmon_pwm: |
| return adt7470_pwm_write(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t adt7470_is_visible(const void *_data, enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| umode_t mode = 0; |
| |
| switch (type) { |
| case hwmon_temp: |
| switch (attr) { |
| case hwmon_temp: |
| case hwmon_temp_alarm: |
| mode = 0444; |
| break; |
| case hwmon_temp_min: |
| case hwmon_temp_max: |
| mode = 0644; |
| break; |
| default: |
| break; |
| } |
| break; |
| case hwmon_fan: |
| switch (attr) { |
| case hwmon_fan_input: |
| case hwmon_fan_alarm: |
| mode = 0444; |
| break; |
| case hwmon_fan_min: |
| case hwmon_fan_max: |
| mode = 0644; |
| break; |
| default: |
| break; |
| } |
| break; |
| case hwmon_pwm: |
| switch (attr) { |
| case hwmon_pwm_input: |
| case hwmon_pwm_enable: |
| mode = 0644; |
| break; |
| case hwmon_pwm_freq: |
| if (channel == 0) |
| mode = 0644; |
| else |
| mode = 0; |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return mode; |
| } |
| |
| static const struct hwmon_ops adt7470_hwmon_ops = { |
| .is_visible = adt7470_is_visible, |
| .read = adt7470_read, |
| .write = adt7470_write, |
| }; |
| |
| static const struct hwmon_channel_info * const adt7470_info[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | HWMON_T_ALARM), |
| HWMON_CHANNEL_INFO(fan, |
| HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM, |
| HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM, |
| HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM, |
| HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_DIV | HWMON_F_ALARM), |
| HWMON_CHANNEL_INFO(pwm, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_FREQ, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE), |
| NULL |
| }; |
| |
| static const struct hwmon_chip_info adt7470_chip_info = { |
| .ops = &adt7470_hwmon_ops, |
| .info = adt7470_info, |
| }; |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int adt7470_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| int vendor, device, revision; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR); |
| if (vendor != ADT7470_VENDOR) |
| return -ENODEV; |
| |
| device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE); |
| if (device != ADT7470_DEVICE) |
| return -ENODEV; |
| |
| revision = i2c_smbus_read_byte_data(client, ADT7470_REG_REVISION); |
| if (revision != ADT7470_REVISION) |
| return -ENODEV; |
| |
| strscpy(info->type, "adt7470", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static const struct regmap_config adt7470_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .use_single_read = true, |
| .use_single_write = true, |
| }; |
| |
| static int adt7470_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct adt7470_data *data; |
| struct device *hwmon_dev; |
| int err; |
| |
| data = devm_kzalloc(dev, sizeof(struct adt7470_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->num_temp_sensors = -1; |
| data->auto_update_interval = AUTO_UPDATE_INTERVAL; |
| data->regmap = devm_regmap_init_i2c(client, &adt7470_regmap_config); |
| if (IS_ERR(data->regmap)) |
| return PTR_ERR(data->regmap); |
| |
| i2c_set_clientdata(client, data); |
| mutex_init(&data->lock); |
| |
| dev_info(&client->dev, "%s chip found\n", client->name); |
| |
| /* Initialize the ADT7470 chip */ |
| err = regmap_update_bits(data->regmap, ADT7470_REG_CFG, |
| ADT7470_STRT_MASK | ADT7470_TEST_MASK, |
| ADT7470_STRT_MASK | ADT7470_TEST_MASK); |
| if (err < 0) |
| return err; |
| |
| /* Register sysfs hooks */ |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, |
| &adt7470_chip_info, |
| adt7470_groups); |
| |
| if (IS_ERR(hwmon_dev)) |
| return PTR_ERR(hwmon_dev); |
| |
| data->auto_update = kthread_run(adt7470_update_thread, client, "%s", |
| dev_name(hwmon_dev)); |
| if (IS_ERR(data->auto_update)) |
| return PTR_ERR(data->auto_update); |
| |
| return 0; |
| } |
| |
| static void adt7470_remove(struct i2c_client *client) |
| { |
| struct adt7470_data *data = i2c_get_clientdata(client); |
| |
| kthread_stop(data->auto_update); |
| } |
| |
| static const struct i2c_device_id adt7470_id[] = { |
| { "adt7470", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, adt7470_id); |
| |
| static struct i2c_driver adt7470_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "adt7470", |
| }, |
| .probe_new = adt7470_probe, |
| .remove = adt7470_remove, |
| .id_table = adt7470_id, |
| .detect = adt7470_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| module_i2c_driver(adt7470_driver); |
| |
| MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>"); |
| MODULE_DESCRIPTION("ADT7470 driver"); |
| MODULE_LICENSE("GPL"); |